GetXMLData in document viewer sample code

Hi!
Chapter 12 of the XML User Guide discusses invoking a method called getXMLData. Since it is not in any of the AMs, does anyone have experience writing this method? I have an xml report to pick up 2 parameters (just free-form text and no VOs) in the page and I need this method to pick up the 2 parameters.
Any help is appreciated. Thanks

Hi Steve
Go to the following link:
https://www.sdn.sap.com/irj/sdn/businessobjects-samples?rid=/webcontent/uuid/e02e0a54-6471-2b10-c99c-d66e07fab102&startindex=61.
There you can see different sample codes.
You need to refer to
Java_Enterprise_BE115_Set_Multivalue-Parameters.zip
Hope this helps you.
Thanks
Soni

Similar Messages

  • I want to change my simulate view of document in transaction code F-02

    Dear all
    I want to change my simulate view of document in transaction code F-02 and want to display line item text there in my simulation.The standard layout in edit option"FB00" is "SAP01 SAP standard".This is in Doc. overview line layout.
    I want to add line item text in the line layout by copying the same.can any body tell me the menu path for resolving my problem
    Thanks in advance
    Regards
    Requester

    Hi,
    Use transaction O7E6 and create your own variant and then set up using transaction FB00.
    Award points if helpful.
    Sadie Gajanand

  • How-To/Sample code to tie up class variable to MXML component created in Design view

    This is a very noob question but I've been searching through the documentation for the last 2 hours and can't seem to find anything helpful.  I have a SWFLoader created in the design view.  I have all my app code in an <fx:Script> with all my functions and variable in a CDATA tag.  All I want to do is hookup the SWFLoader created in the design view with a private var in my ActionScript. 
    I also have two separate states for my app, and I want the same SWFLoader to be visible in both states. Can someone point me to some useful sample code or documentation??
    Any help is much appreciated.

    Sun has recommendations for naming conventions. Class names should start with a capital letter. You should avoid using class names that are the same as classes provided in the SDK. Following these conventions will make it easier for people to help you. For example, you should not use file, nor should you use File. It's better to use MyFile, replacing My with something that makes sense to your application (SeniorFile?).
    Also, check the Formatting Help link when posting for a desciption on how to use the code tags for posting code.
    1. You need to establish references between your classes. One way is to have a constructor that has a JMenuBar argument.
    2. You can not add a file to a JMenuBar because a JMenuBar adds a JMenu. I don't think you want file to extend JMenu. It may be better for file to have a JMenu.
    I haven't tried to compile this code so no guarantees - just trying to show you an approach.
    public class Senior extends JFrame {
       public Senior() {
          JMenuBar bar = new JMenuBar();
          MyFile file = new MyFile(bar);
    //whatever else you need
    public class MyFile {
       public MyFile(JMenuBar mbar) {
          JMenu menu = new JMenu();
          mbar.add(menu);

  • Default XML element - Sample Code

    Hi,
    I am trying to use the sample code for the article "How to default an XML element in an XML document before inserting it into database".
    I am using database 9.2.0.3 and when I try to insert the record into the table, only up to "<Action>" part is inserted into the table and the rest of the XML document is truncated. I've tried inserting the record by disabling the trigger too - but it didn't help.
    Can someone please let me know what could be the problem? Thanks in advance.
    Regards,
    Jatinder

    Hi,
    Could you please tell me you have the queried the inserted record?
    I presume this happens when you issue the query from SQL*Plus to view the inserted record. Let me know if it is otherwise.
    Going by the same example used in the article, just do the following before you issue the query.
    -- you need to set the LONG environment variable to view the full contents in SQL*Plus.
    SQL> set long 20000
    SQL>SELECT VALUE(t) FROM purchaseorder t;
    Hope that helps.
    Savitha.

  • New cluster sample code

    Hello,
    There is a new cluster sample code under the sample code directory.
    Description:
    Giving a new collection of documents or a document hitlist from a new query, it will be more efficient for
    users to known what is in the collection by organizing the collection based on the document sementics. To
    partition a collection is the task of clustering. Here is an implementation and sample code of clustering
    based on Oracle Text.
    http://otn.oracle.com/sample_code/products/text/htdocs/cluster.html

    You'll find all the details you need to accomplish this in the ADF Developer's Guide for Forms/4GL Developers on the ADF Learning Center at http://www.oracle.com/technology/products/adf/learnadf.html.
    Section "8.3 Adding a Custom Service Method" explains how to add a service method to your application module.
    Section "7.8.3 Example of Creating a New Service Request" shows the code required to create a new row in a view object.
    Then you would just use the setAttribute() method on the target row to set the desired attributes to the new values based on the values from the source row.
    Section "8.4.1 How to Publish Custom Service Methods to Clients" describes how you would publish your service method to clients.
    Section "10.3.3 How the Data Model and Service Methods Appear in the Data Control Palette" describes where to look to see your published client methods in the data control palette to drop them as a button on a page.
    Section "4.5 Understanding the Active Data Model" explains why the UI will automatically refresh to display the changes you've made in your application module method when it's invoked.

  • Error while running a sample code

    Hello,
    I 'm getting the following error while i'm trying to run a
    sample code which I have imported into Flex 3.
    ===================================================================
    Severity and Description Path Resource Location Creation Time
    Id
    unable to open 'C:\Documents and Settings\sn55179\My
    Documents\Flex Builder
    3\FlexForDummies_Chapter3_Code\libs'FlexForDummies_Chapter3_Code
    Unknown 1237909480511 215
    ===================================================================
    Can anyone help me in resolving this issue.
    Many thanks in advance.

    It's very frustrating that FB stops working when the libs
    folder is missing. If you are checking in project files to a source
    control app like Perforce, empty folders don't get added, so if you
    don't add an initial dummy file, the next time you do a clean sync,
    the libs folder may not be there, and even though there is nothing
    there, FB complains. :-(

  • Report Engine SDK sample code questions

    Hello,
    I've been able to view a boxi report in an iframe via the Enterprise SDK by modifying the sample code in the HowToViewWebiReports_VB example.
    I'm not totally happy with the way that's working, so I'm looking at using the Report Engine SDK, although I understand it's performance and scalability isn't quite as good as the Enterprise SDK.
    I'm a VB.NET guy, not a C# guy, and I'm not clear on how the wssdk_net2.0_portal_sample_12.0_en example is supposed to work.
    I don't have one and my CMS server is running Tomcat, not IIS so there's not going to be an ASP.NET web service running there.
    In the dsws.config for the wssdk_net2.0_portal_sample_12.0_en example I put the name of the CMS server, but it's looking for a web service at http://cmsservername:8080/dswsbobje/services/Session, but I get a 404 when i try to hit that. 
    I'm not familiar with Tomcat, but in searching around on the server, I see a dswsbobje directory under the webapps in my Tomcat installation, but I don't see a services or a Session folder underneath that.  In the dswsbobje folder I see the following folders:
    BOAR-INF
    META-INF
    WEB-INF
    xsd
    Is there something else that needs to be installed on the Tomcat server to get the web service running?
    -Eric

    It looks like I have something there.  When I launch launch http://servername:8080/dswsbobje,  I see:
    Apache-AXIS
    Hello! Welcome to Apache-Axis.
    What do you want to do today?
    Validate the local installation's configuration
    see below if this does not work.
    To enable the disabled features, uncomment the appropriate declarations in WEB-INF/web.xml in the webapplication and restart it.
    Validating Axis
    If the "happyaxis" validation page displays an exception instead of a status page, the likely cause is that you have multiple XML parsers in your classpath. Clean up your classpath by eliminating extraneous parsers.
    I clicked on the "Validate" link and I see:
    Axis Happiness Page
    Examining webapp configuration
    QaaWS Configuration
    QaaWS Servlet is not valid.
    ErrorServer servername not found or server may be down
    See Web Application log to get more info or read QaaWS v2 documentation starting with section
    Perhaps this environment needs some additional configuration?

  • How to create the Sap script & Layout Set (wants sample code)

    Hi All ,
    Can you please provide me the step by step procedure
    to create the Sap script & Layout Set .(please provide sample
    code/links /docs for layout & print program).
    Regards
    Rahul

    hi,
    go through the following links  what i found to create sap script.
    http://www.thespot4sap.com/Articles/SAPscript_Introduction.asp
    http://abapliveinfo.blogspot.com/2008/01/free-sapscript-made-easy-46-book.html
    http://www.thespot4sap.com/articles/SAPscript_example_code.asp
    http://idocs.de/www3/cookbooks/sapscript/sapscript_1/docu.htm
    http://idocguru.com/www5/cookbooks/sapscript/sapscript_1/example.htm
    www.geocities.com/wardaguilar25/sapscript-tutorial.html
    http://logosworld.de/www3/cookbooks/sapscript/sapscript_8/docu.htm
    how to create a  scripts?give steps?
    https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2969311
    https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2902391
    https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3205653
    https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3111402
    http://www.sap-img.com/sapscripts.htm
    http://sappoint.com/abap/
    http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
    http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
    http://www.sap-basis-abap.com/sapabap01.htm
    http://www.sap-img.com/sapscripts.htm
    http://searchsap.techtarget.com/tip/1,289483,sid21_gci943419,00.html
    http://sap.ittoolbox.com/topics/t.asp?t=303&p=452&h2=452&h1=303
    http://www.sapgenie.com/phpBB2/viewtopic.php?t=14007&sid=09eec5147a0dbeee1b5edd21af8ebc6a
    Other Links

  • Simple sample code to display a Crystal Report from Crystal Enterprise?

    I am looking for a sample application that will "simply" view a report stored on our Crystal Enterprise server. I have looked at "boesdk_net_samples_12.zip", but that isn't really what I am looking for. And, the "CrystalReportViewer" and "CrystalReportSource" add ins for Visual Studio seem to only work with a "local" file (instead of one Managed or UnManaged on our Crystal Enterprise server).
    Can anyone point me to the right place? (Navigating the SAP site is so damn confusing!)

    Hi Shayne,
    You are not clear on how you will know which report you want and for which user? You can query the CMS database for the user and get all of their reports but without knowing which report object ID to get you will need to have the user select one. Unless you simply assume you want the last one, but if you don't give them a choice and they miss one day, or what ever your parameter is to select, there will be no way to get back to that report.
    For sample code on how to query the BOE Server look in the Enterpise SDK samples. You do need to use managed code. I don't suggest going into the FRS\output folder to use unmanaged reporting. There are a lot of folders created and it's easier to simply query the CMS database to get the latest instance.
    Since you have BOE you should also have a support contract. I suggest you log a case on line in Service Market Place and get a dedicated Engineer to assist you.
    This may be simply easier for you to use the Personal Favorites folder of the user so they can browse all report instances belonging to them. I suggest you talk to the BOE Administrator for more info on what BOE is capable of doing. what you want is fairly easy to manage with Enterprise itself.
    Thank you
    Don

  • On file open: "This document contains JavaScript code for a widget that no longer exists."

    I had an existing, functional datepicker in a web page.
    Recently I downloaded the UI Datepicker in the Widget Browser and installed it in DW CS5. Now every time I load the file that calls the datepicker that I added myself, a warning opens with the following text:
    This document contains JavaScript code for a widget that no longer exists. If you don't remove the code, the browser might display JavaScript errors when loading the page. Would you like Dreamweaver to find all instances of this code for you?
    Widget: $("#reservDateBegin").datepicker();
    Widget: $("#reservDateEnd").datepicker();
    Clicking "Yes" opens the file and shows the search box at the bottom of the window with [current document] in File and $("#reservDateEnd").datepicker(); in Matched Text. Clicking "No" just opens the file.
    The error is wrong, since installing the widget is what caused the error in the first place!
    How can I get DW to stop showing this message?
    Thanks for any help.

    I do understand you're trying to be helpful. I was just hoping providing the relevant code snippets would be sufficient so I didn't have to take the time to provide a "cleaned" version of the files and upload those to a public-safe location.
    Zabeth69 wrote: If you don't understand what 'code at the bottom of the page' means, you have not used one of those systems. I don't know what causes the error code to come up (besides removing a Spry widget, I mean). So if it doesn't apply to you, ignore it.
    This is exactly my point: I haven't used any of the DW "systems". I've always manually coded in DW, so I can't have removed a Spry widget in the first place. It wasn't until I installed the Widget using the Widget Browser that I started getting the error (I don't mean adding the datepicker widget to the code using the DW Insert menu - I mean installing the Widget into DW itself). Ignoring such an erroneous/incorrect error seems kind of silly, since every time I open the file I get the error message.
    Anyway, as requested, the following are links to the contactUsCleaned.php page, and the php included headerCleaned.php file. Since these use php includes to complete the rendered HTML, they won't look right in the browser, but as you know viewing the source will show the relevant html, javascript, and jquery code. I didn't see any way to upload the files in this forum, which, due to the php code, would be preferable to see exactly what my code looks like...
    http://www.eventidewebdesign.com/public/contactUsCleaned.php
    http://www.eventidewebdesign.com/public/headerCleaned.php
    The footer.php file the contactUs page includes is simply a set of HTML links to the pages on the site, copyright info, and the Google Analytics script. There is no other code in the footer.php file.

  • Need sample code with RV_INVOICE_CREATE used

    Hi everybody!
    I need sample code with RV_INVOICE_CREATE or similar FMs used.
    The thing is that I do not know how to populate parametres of this and other invoicing FMs....
    For example, there are some tables to be passed to RV_INVOICE_CREATE
         TABLES
              XKOMFK     = XKOMFK
              XKOMV       = XKOMV
              XTHEAD      = XTHEAD
              XVBFS        = XVBFS
              XVBPA        = XVBPA
              XVBRK        = XVBRK
              XVBRP        = XVBRP
              XVBSS        = XVBSS
    How to populate them? I mean how to fill them with needed values?
    Useful answers will be awarded.
    Kind regards, M.

    RV_INVOICE_CREATE is the function module to create invoice based on delivery .
    when you pass delivery number ,it will create invoice ,see the invoice number in vf02,vf03 transaction. and also see the data vbrk,vbrp tables
    I have done this development and i have cancelled invoice,reverse goods issue,updated the delivery and again i am createing invoice..see the below progrm to get better understanding.
    REPORT ZWM_OVERWEIGHT_FIX  no standard page heading
                               message-id zwm.
    ======================================================================
    Program Name : ZWM_OVERWEIGHT_FIX                                    *
    Description  : Tool to fix Overweight in delivery line item,         *
                   Used All Function module to cancel invoice ,          *
                   Reverse the goods issue  ,Update Delivery qty,Create  *
                   invoice                                               *
    Author       : Seshu                                                 *
    Date         : 05/08/2007                                            *
    MODIFICATION HISTORY                                                 *
    DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
    --|||--
    05/08/07| Seshu    | DEVK921979 | Initial                            *
    D A T A - D E C L A R A T I O N     *******************
    Tables
    Tables : vbak,
             vbap,
             vbfa,
             likp,
             lips,
             vbrk,
             vbrp.
    Internal Tables
    data : i_lips like lips occurs 0 with header line,
           i_vbap like vbap occurs 0 with header line.
    Variables
    data : v_deliv like vbfa-vbelv,
           v_invoic like vbfa-vbelv.
    Data Declaration Part for Post Goods Issue
    DATA: l_vbeln LIKE likp-vbeln,
          l_vbkok LIKE vbkok,
          i_prot LIKE prott OCCURS 0 WITH HEADER LINE,
          ef_error_any_0 TYPE c,
          ef_error_in_item_deletion_0 TYPE c,
          ef_error_in_pod_update_0 TYPE c,
          ef_error_in_interface_0 TYPE c,
          ef_error_in_goods_issue_0 TYPE c,
          ef_error_in_final_check_0 TYPE c,
          d_return   LIKE bapireturn1.
    Internal tables for BAPI Function Module
    data : i_cret like BAPIRETURN1 occurs 0 with header line,
           i_csucess like BAPIVBRKSUCcESS occurs 0 with header line,
           i_ret2 like bapiret2 ,
           flag type c,
           i_mesg like mesg occurs 0 with header line.
    Data Declaration for Invoice Creation
    DATA: VBSK_I     LIKE  VBSK.
    data: d_success  type  c.
    DATA: XKOMFK LIKE      KOMFK   OCCURS 0 WITH HEADER LINE,
          XKOMV  LIKE      KOMV    OCCURS 0 WITH HEADER LINE,
          XTHEAD LIKE      THEADVB OCCURS 0 WITH HEADER LINE,
          XVBFS  LIKE      VBFS    OCCURS 0 WITH HEADER LINE,
          XVBPA  LIKE      VBPAVB  OCCURS 0 WITH HEADER LINE,
          XVBRK  LIKE      VBRKVB  OCCURS 0 WITH HEADER LINE,
          XVBRP  LIKE      VBRPVB  OCCURS 0 WITH HEADER LINE,
          XVBSS  LIKE      VBSS    OCCURS 0 WITH HEADER LINE,
          XKOMFKGN LIKE    KOMFKGN OCCURS 0 WITH HEADER LINE.
    S E L E C T I O N  -  S C R E E N   ******************
    Selection-screen
    Selection-screen : begin of block blk with frame title text-001.
    parameters : p_vbeln like vbak-vbeln obligatory.
    selection-screen : end of block blk.
    A T -  S E L E C T I O N  - S C R E E N ***************
    Validation on Sales order
    at selection-screen on p_vbeln.
    Check the data on VBAK Table
      select single vbeln from vbak into vbak-vbeln
                                where vbeln = p_vbeln.
      if sy-subrc ne 0.
        message e006 with p_vbeln.
      endif.
    S T A R T  - O F - S E L E C T I O N *******************
    Start-of-selection.
      break sreddy.
    Get the Invoice Number corresponding Sales Order Number
      perform get_invoice.
    Step 1.
    Cancel the Invoice  - Transaction VF11
      perform cancel_invoice.
    Reverse the goods issue
      perform reverse_goodsissue.
    Get the Order and Delivery Items
      perform get_sales_deliv.
    Delivery Change
      perform Delivery_change.
    Create Invoice document
      perform invoice_create.
    E N D  -  O F -  S E L E C T I O N  *******************
    end-of-selection.
    if flag = 'X'.
    message i012 with p_vbeln.
    endif.
    *&      Form  get_invoice
          Get Invoice Number
    FORM get_invoice.
    Clear Variables
      clear : v_deliv,
              v_invoic,
              flag.
    Get the Delivery Number First
      select single vbeln from vbfa into v_deliv
                               where vbelv = p_vbeln
                               and   vbtyp_n = 'J'.
      if sy-subrc ne 0.
        message i004 with p_vbeln.
        stop.
      endif.
    Get the Invoice Number
      select single vbeln from vbfa into v_invoic
                               where vbelv = p_vbeln
                               and   vbtyp_n = 'M'.
      if sy-subrc ne 0.
        message i003 with p_vbeln.
        stop.
      endif.
    ENDFORM.                    " get_invoice
    *&      Form  cancel_invoice
          Cancel the Invoice
    FORM cancel_invoice.
      clear : i_ret2,
              i_cret,
              i_csucess.
      refresh : i_cret,
                i_csucess.
      CALL FUNCTION 'BAPI_BILLINGDOC_CANCEL1'
        EXPORTING
          BILLINGDOCUMENT       = v_invoic
      TESTRUN               =
      NO_COMMIT             =
      BILLINGDATE           =
        TABLES
          RETURN                = i_cret
          SUCCESS               = i_csucess
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
                WAIT   = space
           IMPORTING
                RETURN = i_ret2.
    read table i_cret with key type = 'E'.
      if sy-subrc ne 0.
        message i005 with v_invoic.
        stop.
      endif.
    ENDFORM.                    " cancel_invoice
    *&      Form  reverse_goodsissue
          Reverse the goods Issue
    FORM reverse_goodsissue.
    Local Variable
      data : lv_vbtyp like likp-vbtyp.
      clear : i_mesg,
              lv_vbtyp.
      refresh : i_mesg.
      select single vbtyp from likp into lv_vbtyp
                               where vbeln = v_deliv.
      CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
        EXPORTING
          I_VBELN                         = v_deliv
          I_BUDAT                         = sy-datum
        I_COUNT                         =
        I_MBLNR                         =
        I_TCODE                         =
          I_VBTYP                         = lv_vbtyp
        TABLES
          T_MESG                          = i_mesg
       EXCEPTIONS
         ERROR_REVERSE_GOODS_ISSUE       = 1
         OTHERS                          = 2
      if sy-subrc ne 0.
        message i007 with v_deliv.
      endif.
    ENDFORM.                    " reverse_goodsissue
    *&      Form  get_sales_deliv
          Get the Sales order and Deliv Items
    FORM get_sales_deliv.
    Local Variables
      data : lv_kwmeng like vbap-kwmeng.
      clear : i_lips,
              i_vbap.
      refresh : i_lips,
                i_vbap.
    Select the data from LIPS
      select * from lips into table i_lips
                         where vbeln = v_deliv.
      if sy-subrc ne 0.
        message i008 with v_deliv.
        stop.
      endif.
      sort i_lips by vbeln posnr.
      Get the Sales order Item Data.
      select * from vbap into table i_vbap
                              where vbeln = p_vbeln.
      if sy-subrc ne 0.
        message i006 with p_vbeln.
        stop.
      endif.
      sort i_vbap by vbeln posnr.
    Compare delivery Item and Order Items
      loop at i_lips.
        clear lv_kwmeng.
        read table i_vbap with key posnr = i_lips-posnr.
        if sy-subrc eq 0.
          lv_kwmeng = i_vbap-kwmeng * 2.
          if lv_kwmeng >= i_lips-lfimg.
            i_lips-lfimg = i_vbap-kwmeng.
            modify i_lips.
          endif.
        endif.
      endloop.
    ENDFORM.                    " get_sales_deliv
    *&      Form  Delivery_change
          Delivery Update
    FORM Delivery_change.
      Clear : i_prot.
      refresh : i_prot.
    Delivery Update
      CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
           EXPORTING
                do_commit                = 'X'
           TABLES
                t_delivery_items         = i_lips
                prot                     = i_prot
           EXCEPTIONS
                conversion_overflow      = 1
                essential_data_missing   = 2
                error                    = 3
                nothing_to_update        = 4
                lock_after_update_failed = 5
                error_in_delivery_update = 6
                OTHERS                   = 7.
      COMMIT WORK.
      IF sy-subrc <> 0.
        MESSAGE i009 with v_deliv.
      endif.
    Post Goods Issue
      CLEAR:    d_return,
                i_prot,
                l_vbeln,
                l_vbkok.
      REFRESH i_prot.
      CLEAR:  ef_error_in_item_deletion_0    ,
              ef_error_in_pod_update_0       ,
              ef_error_in_interface_0        ,
              ef_error_in_goods_issue_0      ,
              ef_error_in_final_check_0      .
    carry out goods issue
      l_vbeln          = v_deliv.
      l_vbkok-vbeln_vl = l_vbeln.
      l_vbkok-wabuc    = 'X'.
    carry out goods issue
      l_vbeln          = v_deliv.
      l_vbkok-vbeln_vl = l_vbeln.
      l_vbkok-wabuc    = 'X'.
    SET UPDATE TASK LOCAL.
      CALL FUNCTION 'WS_DELIVERY_UPDATE'
           EXPORTING
                vbkok_wa                    = l_vbkok
                synchron                    = 'X'
                no_messages_update          = ' '
                update_picking              = 'X'
                commit                      = 'X'
                delivery                    = l_vbeln
                nicht_sperren               = 'X'
                if_error_messages_send_0    = space
           IMPORTING
                ef_error_any_0              = ef_error_any_0
                ef_error_in_item_deletion_0 = ef_error_in_item_deletion_0
                ef_error_in_pod_update_0    = ef_error_in_pod_update_0
                ef_error_in_interface_0     = ef_error_in_interface_0
                ef_error_in_goods_issue_0   = ef_error_in_goods_issue_0
                ef_error_in_final_check_0   = ef_error_in_final_check_0
           TABLES
                prot                        = i_prot
           EXCEPTIONS
                error_message               = 1
                OTHERS                      = 2.
      if sy-subrc ne 0.
        message i010 with v_deliv.
      else.
        COMMIT WORK .
      endif.
    ENDFORM.                    " Delivery_change
    *&      Form  invoice_create
          Invoice Creation
    FORM invoice_create.
      refresh: XKOMFK, XKOMV,
               XTHEAD, XVBFS,
               XVBPA,  XVBRK,
               XVBRP,  XVBSS.
      clear  : XKOMFK, XKOMV,
               XTHEAD, XVBFS,
               XVBPA,  XVBRK,
               XVBRP,  XVBSS,
               VBSK_I.
      VBSK_I-SMART = 'F'.
      XKOMFK-VBELN =  v_deliv.
      XKOMFK-VBTYP = 'J'.
      APPEND XKOMFK.
      CALL FUNCTION 'RV_INVOICE_CREATE'
           EXPORTING
                VBSK_I       = VBSK_I
                WITH_POSTING = 'C'
           TABLES
                XKOMFK       = XKOMFK
                XKOMV        = XKOMV
                XTHEAD       = XTHEAD
                XVBFS        = XVBFS
                XVBPA        = XVBPA
                XVBRK        = XVBRK
                XVBRP        = XVBRP
                XVBSS        = XVBSS.
      if sy-subrc eq 0.
        COMMIT WORK.
       flag = 'X'.
      else.
      message i011 with p_vbeln.
      endif.
    ENDFORM.                    " invoice_create
    Reward Points if it is helpful
    Thanks
    Seshu

  • What does it take to run OTN sample code?

    Do I have to install some kind of developers tool kit in order to compile and run the OTN and Oracle-install related sample code?
    Also, I noticed that OTN only has toolkits for Oracle 9i, and nothing for Oracle 8i. Is Oracle abandoning 8i? Lots of us are not moving to 9i for some time, and abandoning 8i is not a swift idea. If we can not do what we need to do in 8i, we can always use Microsoft SQL Server, which we already have and are familiar with . . . There are those in the department that are using this to argue for a return to SQL Server.

    I re-read my posting, looking for any mention of a lack of Oracle 8i documents and could not find any.
    But I did notice that I mentioned OTN Samples and a question regarding the need to install toolkits in order to run them. I still don't know the answer. You see, the OTN sample readme files seem quite 'lean', and the classpath info needed to compile the Java code is not provided. I have not been able to compile the code after quite a bit of effort, prompting me to question the need for a tool kit. Or perhaps some .jar or .zip files are missing?
    I also questioned support for Oracle 8i in that OTN is featuring 9i almost exclusively. This was prompted by my inability to locate 8i toolkit downloads in case I needed them. Plus the fact that we will be on 8i until next year . . .
    Have a nice day.

  • Sample code for slow moving material report?

    Hi all,
    I have a requirement to display slow moving mateial report on a particular goods issue date and material wise.
    The basic requirements are
    1. Movement type '261'  and material, plant are select-options.
    2.last goods movement date based on  parameter.
    3. Display the quantity available
    but here i am getting a problem that i couldn't find the last goods movement for that particular material with specific storage location as one material document containing more than one item. So please help? Also what logic i have to use to display quantity available?
    Please specify the sample code or logic for above requirement?
    Any custom slow moving report codes also very helpful?
    Thanks,
    Vamshi

    >
    VAMSHI KRISHNA wrote:
    > Solved.
    ....Shaved.

  • Need Sample code to upload the data to Application Server

    Hi ,
    I need to upload the data to application server.
    The output should be an XML file.
    Can anybody send me sample code for this.
    Reward points are assured.
    Best Regards
    Bhagat.

    may be this code wil help ,first to downjload the XML fine -
    1)
    REPORT  zhr_test2_tk.
    TYPE-POOLS: ixml.
    TYPES: BEGIN OF xml_line,
            data(256) TYPE x,
           END OF xml_line.
    DATA: l_ixml            TYPE REF TO if_ixml,
          l_streamfactory   TYPE REF TO if_ixml_stream_factory,
          l_ostream         TYPE REF TO if_ixml_ostream,
          l_renderer        TYPE REF TO if_ixml_renderer,
          l_document        TYPE REF TO if_ixml_document.
    DATA: l_element_position TYPE REF TO if_ixml_element,
          l_element_title    TYPE REF TO if_ixml_element,
           l_element_flight  TYPE REF TO if_ixml_element,
           l_element_from    TYPE REF TO if_ixml_element,
           l_element_to      TYPE REF TO if_ixml_element,
            l_element_dummy   TYPE REF TO if_ixml_element,
             l_value           TYPE string.
    DATA: l_xml_table       TYPE TABLE OF xml_line,
          l_xml_size        TYPE i,
          l_rc              TYPE i.
    DATA: lt_erec TYPE TABLE OF hrp5126,
          l_erec TYPE hrp5126.
    DATA: date(10),
          time(4),
          filepath TYPE string.
    CONSTANTS: filedir TYPE string VALUE 'C:\tmp\',
               filename TYPE string VALUE 'ZHR_test'.
    START-OF-SELECTION.
    fill internal table
      SELECT * FROM hrp5126 INTO TABLE lt_erec.
    Start filling xml DOM object from internal table lt_erec.
      LOOP AT lt_erec INTO l_erec.
    *Create the root node 'position'
        IF sy-tabix EQ 1.
        create an ixml factory
          l_ixml = cl_ixml=>create( ).
        create Document Object Model
          l_document = l_ixml->create_document( ).
       Fill root node with value 'position'
          l_element_position = l_document->create_simple_element(
                         name   = 'position'
                         parent = l_document ).
        ENDIF.
        IF sy-tabix GT 1.
        create element jobtitle as child of position
          l_value = l_erec-jobtitle.
          l_element_title = l_document->create_simple_element(
                             name   = 'job_title'
                             parent = l_element_position
                             value  = l_value ).
          l_value = l_erec-empl_start_date.
          l_element_dummy = l_document->create_simple_element(
                             name   = 'StartDate'
                             parent = l_element_title
                             value  = l_value ).
          l_value = l_erec-empl_end_date.
          l_element_dummy = l_document->create_simple_element(
                             name   = 'EndDate'
                             parent = l_element_title
                             value  = l_value ).
        ENDIF.
      ENDLOOP.
      IF sy-subrc NE 0.
        WRITE: 'No data in table hrp5125'.
      ENDIF.
    create a stream factory
      l_streamfactory = l_ixml->create_stream_factory( ).
    connect internal XML table to streamfactory
      l_ostream = l_streamfactory->create_ostream_itable(
                      table = l_xml_table ).
    render the document
      l_renderer = l_ixml->create_renderer( ostream  = l_ostream
                                            document = l_document ).
      l_rc = l_renderer->render( ).
    Get time and date
      WRITE sy-uzeit2(2) TO time2(2).
      WRITE sy-uzeit0(2) TO time0(2).
      WRITE sy-datum4(2) TO date0(2).
      WRITE sy-datum6(2) TO date2(2).
      WRITE sy-datum0(4) TO date4(4).
    *Build filename with date and time reference
    CONCATENATE filedir filename date time '.xml' INTO filepath.
    <i>* This is the code I hope to modify in order to save the xml structure on the application server, with a specified filepath.</i>
    <b>  OPEN DATASET filepath FOR OUTPUT IN BINARY MODE.
      LOOP AT lt_erec into l_erec.
        TRANSFER  l_erec TO filepath.
      ENDLOOP.
      CLOSE DATASET filepath.</b>
    save XML document
      l_xml_size = l_ostream->get_num_written_raw( ).
    *This is the code for download to local computer
    CALL METHOD cl_gui_frontend_services=>gui_download
       EXPORTING
         bin_filesize            = l_xml_size
         filename                = filepath
         filetype                = 'BIN'
       CHANGING
         data_tab                = l_xml_table
       EXCEPTIONS
         file_write_error        = 1
         no_batch                = 2
         gui_refuse_filetransfer = 3
         invalid_type            = 4
         no_authority            = 5
         unknown_error           = 6
         header_not_allowed      = 7
         separator_not_allowed   = 8
         filesize_not_allowed    = 9
         header_too_long         = 10
         dp_error_create         = 11
         dp_error_send           = 12
         dp_error_write          = 13
         unknown_dp_error        = 14
         access_denied           = 15
         dp_out_of_memory        = 16
         disk_full               = 17
         dp_timeout              = 18
         file_not_found          = 19
         dataprovider_exception  = 20
         control_flush_error     = 21
         OTHERS                  = 22.
    IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    2) uploading tht PC XML file to APPliaction server -
    DATA rec like QISRS_XML_LINE.
    OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    LOOP AT l_xml_table into rec.
    TRANSFER rec TO filepath.
    ENDLOOP.
    CLOSE DATASET filepath.

  • Document Viewer: Show document inplace using "view_document_from_table"

    Hello,
    i am trying to show a pdf-document on a dynpro using i_io_document_viewer.
    As long as I don't activate "show_inplace", it works fine. The document is correctly shown in an external browser window. So the parameters i export seem to be allright. But when I set show_inplace='X' nothing happens - neigther the document is shown nor I get an error. I think my way to create the control and the container could be the problem...
    Name of my Custom Control at the dynpro: CC_DOCUMENT
    my_viewer TYPE REF TO i_oi_document_viewer
    my_custom_container TYPE REF TO cl_gui_custom_container
    Code:
        CALL METHOD c_oi_container_control=>get_document_viewer
          IMPORTING viewer = my_viewer.
        CREATE OBJECT my_custom_container
          EXPORTING container_name = 'CC_DOCUMENT'.
        CALL METHOD my_viewer->init_viewer
          EXPORTING parent = my_custom_container.
        CALL METHOD my_viewer->view_document_from_table
          EXPORTING show_inplace = 'X'      "With ' ' it works...but of couse NOT inplace :-(
                  type = 'application'
                  subtype = 'pdf'
                  size = file_size
          CHANGING  document_table = file_table
    Does anybody see my mistake? I've been searching for hours -.-
    Thank you for helping,
    Best regards, margger
    Edited by: margger on Mar 22, 2011 2:51 PM

    Hey Andrea,
    thank you for your answer. The problem is that the .pdf is only a test file - later there will be images, movies, pdf-documents, ...
    So the integration of the document viewer would be nice. And, like I said, showing the document works, but not embedded in my dynpro.
    Regards,
    margger

Maybe you are looking for