GiGe camera waits till there is a TTL signal takes a picture and then waits again for another TTL signal (IMAQdx)
Hello , I have a problem with a GIgE AVT camera.
All I want to do is make the camera wait and each time there is a TTL signal snap a picture and save it to the disk.
I have spent hours and hours trying to make this work but I had no luck !
Could someone with knowledge of the IMAQdx drivers help me please !?
I really can't find a solution to this problem!
Hello LaThoS,
thanks for your reply .
What i am trying to do is use an AVT GS660 which actually has a hardware trigger input and all i am trying to do is put it in a while loop and make it wait untill there is an external ttl signal, then take a picture , save it and then wait for another ttl signal !
I 've seen the examples but i cannot see how they are going to be usefull to me since there is no hardaware ttl signal on the cam( https://decibel.ni.com/content/docs/DOC-15346)
I am attaching my sample code.
Could you please help me figure it out ?
Thanks in advance,
yannis.
ps:the problems that i am facing is that on ttl the camera starts saving the same image continisously till i stop the loop !
Attachments:
AVT_v5_NI.vi 75 KB
enum.ctl 4 KB
Similar Messages
-
I am unable to download photos from my iphone4 , SD card , SLR camera to my ipad2 using apple accessories , please help , it has worked once and then never again.
Plumchunks-
The only accessory I know of that can be used to transfer photos from a camera or SD card to the iPad, is the Apple Camera Connection Kit. The kit consists of two adapters. One has an SD card socket. The other has a USB connector to connect directly to the camera.
I do not think you can transfer photos from the iPhone to the iPad unless you first transfer them to a computer. If you then transfer the photos to an SD card, they must have eight character names plus suffix and be stored in a DCIM folder, just as if they came from a camera.
One thing you can try is to reboot the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Rebootting will not hurt anything and sometimes clears up mysterious problems.
Fred -
My iPhone 4 is severely making me mad. It won't save any pictures I take. I will take the picture, then go to view it in the Camera Roll, and it just won't be there. The same thing occurs when screen shotting things on my iPhone. Some times it won't even let me delete the existing pictures I had on my phone before this all happened. I will click delelte, then it will pause, and eventually close me out of the photos app. However, when I go to settings, it says I have 440MB of pictures on here somewhere. But I can oly see 3 pictures in the camera roll. Also, it says in the camera roll app that it is 'Restoring...' then just sits and loads and won't restore anything at all. HELP ME PLEASE. I have iOS 7.1 currently installed.
Have you Tried Clearing the The Cache in the Camera or Gallery in your Applications Area.. Go to Settings--> Applications--> Manage Applications--> Select All--> Clear the Cache in Both the Camera & Gallery Clearing the Data however might Clear you Pictures in your Gallery but if your Ok with it Give it a Shot,
-
My iphone 4s camera go off every time it try to take a picture
My iPhone 4S camera goes off every time I try to take a picture.
Hi, Abdel_mounia
Thank you for visiting Apple Support Communities.
Here are some steps I would recommend going through to troubleshoot this issue. If the issue still persists, see the last section labeled issue not resolved in the article below.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H. -
I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?
Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN -
I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine. -
Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
I've an iPhone 3 and it happend for the first time yesterday. I had to shut down my phone for a theatershow, and when I started my phone again after the show, it constantly shut down and then started again... Is there a way to delete something or something? 'cause it's very annoying! Already thanks!
Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
"Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
http://support.apple.com/kb/HT1414 -
Iphone 6 camera takes a picture and the picture is missing
Question about the iphone 6. Two different occasions now i have taken a picture with the stock camera app, the picture shows up in the bottom left preview window and when i go to click it and it takes me to the photo app, the picture is not there. Preview always stays there for the picture but the picture is missing. The first time it happened i tried to reboot the phone, it was still there, then i did a restore and then the picture preview was finally gone. Now it happened again and i would like to not restore my phone again. Is anyone having this issue? It happened once before the ios8 update and after it. I have been searching all over and cant seem to find anyone who has this problem. I even plugged the phone into my computer to see if it was in there and it wasn't. Thanks!
Yes the restore phone worked to lose the pic but then it just happened again a couple weeks later. I actually found a work around for getting rid of the preview picture. I plugged my phone in and deleted any recent pics from the camera and cleared the photo stream then I restored a photo I had from the trash on the phone and then delete the trash photo again, some reason the preview of the lost pic goes away. That just happened on a fluke but I Still haven't figured out why the camera takes a picture and it doesn't always exist except in a preview though. At least i figured out how to get rid of it without restoring.
-
My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?
If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
Do this to transfer info
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
Is there a way to copy an ical calendar and then re enter it in ical at a later date?
is there a way to copy an ical calendar and then re enter it in ical at a later date? i am trying to copy my workout calendar and move it forward but i want to keep the one from june july and august of this year. I guess techinically it is a recurring calendar but all the exercises recur at different intervals
If you want to share albums on dropbox or similar web services, set the album in your custom order and use the export command to a temporary folder on your computer. To keep the sort order, use the option to rename with a common starting text string plus an order number. Since you'll upload those files to Internet, also use the resizing feature to export in a reasonable size, not too big for uploading/downloading, and not too small if you want your relatives to able to print and not only to view.
So, you'll get a folder ready to upload and share via Dropbox or another Web service. -
I'm trying to download an epsiode of Dr. Who, but the download is saying it will take 24 hours, and then it stops and says "there was a problem downloading; an unknown error occured (50). How can I fix this? I don't think it's my internet, it's really pretty fast.
Thanks!Try fixing up the validation issues...
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
Not promising it will help, but it's worth a shot. -
The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back. -
Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil."The Ipad is on a short cable to my projector."
Get a longer cable? -
Does anyone know if we are able to deauthorize a computer and then reauthorize again? I want to make sure my library will still be there if I do that.
Yes. Yu have to just ensure that the iPod is signed into the iTunes account(s) that purchased the apps and other stuff and you have iTunes et up to sync the stuff to the iPod. You will loose however, any app data you have.
BTW, you can always redownload app at no addition cost. See:
How to redownload purchased apps from the App Store
Maybe you are looking for
-
I don't recall this feature on any other version of firefox. For some reason, I can't stop focusing on the fact that every time I scroll over something on a webpage, an annoying white box pops up in the corner of the website displaying the hyperlink,
-
IPhone emailed pictures no longer showing up as attachments after update to IOS 6.1.3
When emailing photos, they no longer show up in my Outlook email as attachments after I updated my iPhone4S to IOS6.1.3. They did just prior to this update. Anyone know why?
-
HI: I am using Apex 3.2 and pl_fpdf to generate pdf reports. I have the pdfs working very well. By default, the pdfs are sent to the browser. In most cases this is fine. But, in one specific case I wasnt to generate the pdf and attach it to an email.
-
Hi All, We have imported Seeburger SWCV into IR and i can see different message types(orders,invoices etc) in external definitions and some standard mappings like(E_ORDERS_96A_to_I_ORDERSO5_LIST, T_ORDERS_V9_to_I_ORDERS05, etc)in message mapping.Does
-
OK, Have problem. I set the dial norm to -31 for a 2 channel AC-3 project. When I play the track in DVDSP, the level is too low. At least 6 db lower than the track in Final Cut. the menu music is also too low. Past experience has been leaving the def