Give a file with the SOAP response

Hello experts!
I'd like to ask you about the next situation on our PI 7.0:
I have to make a scenario like this: SOAP -> XI -> RFC
After a validation on the ECC side, in the the response.. I have to pick up a File (that come as the request from the webservice with his directory) and give it back to the Web Service.
At the start I thought to do it with a BPM.. but the the issue is that the FileName and Direcory will be dynamic (the WS is going to request different files from diff. directories) and also, the WS response need the file, for example, lile a byte array.
Is it possible?
Please if it isn't fully explained tell me.
Thanks,
  Juan

I've seen in here:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
that:
SOAP Adapter
●      In the sender adapter, you cannot add your own modules.
Is this a constraints for what I posted above?
Regards,
  Juan

Similar Messages

  • Proxy to SOAP Scenario, payload with the SOAP envelops

    Hi ,
    We have Scenario like Proxy to SOAP,As per Business requirement they are asking payload with ENVELOP . Like below message
    ================================================================
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding">
         <SOAP-ENV:Header>
              <nseps:endpoints xmlns:nseps="urn:schemas-IBX:/docs/endpoint.nsendpoint" SOAP-ENV:mustUnderstand="true">
                   <nseps:to>
                        <nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
                   </nseps:to>
                   <nseps:from>
                        <nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
                   </nseps:from>
              </nseps:endpoints>
              <nsprop:properties xmlns:nsprop="urn:schemas-IBX:/docs/property.nsproperty" SOAP-ENV:mustUnderstand="true">
                   <nsprop:identity>3198841w-fa4d-dafa-2797-89029c15255b</nsprop:identity>
                   <nsprop:sentAt>2010-01-18T02:42:08Z</nsprop:sentAt>
                   <nsprop:topic>CostObjectInformation</nsprop:topic>
              </nsprop:properties>
         </SOAP-ENV:Header>
         <SOAP-ENV:Body>
    //Payload of the message to be added here.
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    I am trying out this in XSLT, but I am not sure how to add the SOAP Envelops and these Envelops are Static.
    Can someone help me out in this.
    Joe

    But if you look at the SOAP Envelop Structure below it is not XI generated SOAP Envelop. IBX (3rd party) has its own standards, so XI has to Produce the SOAP Envelop according to their standards.
    I have created the XSD with SOAP Envelop stucture with what ever structure 3rd party wants, but the problem is when Creating the SOPA Envelp tag, where it has a ":" where its not allowing me to create the valid XSD. And at the same time 3rd party is not in position to give us even WSDL file and we are not using  Webservice call and they are not able to provide the XSD with SOAP envelop structure.
    I thought of going for XSLT and started doing as well with what ever XSD 3rd party has provided, which does not have the SOAP Envelop structure and has only payload XSD structure.
    80% of the SOAP Envelop structure is Static, it does not change. Only 2 fields keeps changing. IS there any solution that we can create XSD with the SOAP structure with Special Character ": "or is there any way in doing in XSLT.
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding">
    <SOAP-ENV:Header>
    <nseps:endpoints xmlns:nseps="urn:schemas-IBX:/docs/endpoint.nsendpoint" SOAP-ENV:mustUnderstand="true">
    <nseps:to>
    <nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
    </nseps:to>
    <nseps:from>
    <nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
    </nseps:from>
    </nseps:endpoints>
    <nsprop:properties xmlns:nsprop="urn:schemas-IBX:/docs/property.nsproperty" SOAP-ENV:mustUnderstand="true">
    <nsprop:identity>3198841w-fa4d-dafa-2797-89029c15255b</nsprop:identity>
    <nsprop:sentAt>2010-01-18T02:42:08Z</nsprop:sentAt>
    <nsprop:topic>CostObjectInformation</nsprop:topic>
    </nsprop:properties>
    </SOAP-ENV:Header>
    <SOAP-ENV:Body>
    its a high priority issue.
    Thanks in Advance.
    Joe.

  • Sending the SOAP request back in the SOAP response

    Hi,
    I have a requirement in which I need to update a database from the information I receive in a SOAP request. Now my database will respond back with the number of records that are updated. Now I need to send back a SOAP response which should have the details that I received in the SOAP request.
    Can anyone help me on how to send the SOAP request details back in the SOAP response again? I don't want to use a BPM to do this. Also I know that I can use a select statement to get the records that are updated in my response mapping program. Any options other than these?
    - Ram

    Hi Stish,
      I do have exactly the same need, just with the difference that I'm sendind data from JDBC as sender and RFC as receiver, the RFC receive an ID fot example and return some data as a response and I want to update the DB with that response but I dont know how to merge the ID from the request and the data from the response in order to send it back and update the DB. I'm willing to do it with BPM but I don't know how to keep the request and the response and then merge them into the new message that will be sent to the JDBC, can you give me some specific steps?
    Thanks in advance.
    Gustavo Balboa.

  • I need to create an action or script to save the file with the name of the selected layer

    I need to create an action or script to save the file with the name of the selected layer (not including the hidden layers, but including those visible).
    How could modify the script: 'Layer Comps To Files.jsx' to get the result?
    Warning: I do not need to export all layers as files.
    Who can help me?
    THX in advance

    Versione in Italiano (Further down the English version)
    NB - Nella versione inglese ho messo tutte le immagini dei menu in italiano.
    Versione per Mac, ma credo sia identico per Windows.
    Spiego passo passo cosa ho fatto:
    - Ho creato un file esempio con tre Livelli, salvato sulla scrivania e ho chiuso il file.
    - Ho aperto il file e selezionato il Livello al centro per iniziare a registrare una azione che ho chiamato: Save with Name of Selected Layer
    - Nuova azione
    - Dare il nome e premere Registra
    Ora salva…
    - Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
    - Ancora una volta Menu --> Livello... --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
    - Menu --> Livello --> Ordina --> Dietro
    - Menu --> Livello --> Unisci sotto
    - Menu --> Livello --> Unisci visibili
    - Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
    - Menu --> Livello - Nascondi Livello
    - Menu --> Elimina --> Elimina livelli nascosti (press -Yes-)
    - Menu --> Livello --> Nuovo --> Livello... Inserisci questo: 'Move this to the trash' e premi ok
    - Menu --> File --> Script --> Esporta Livelli in File... (Nella finestra che si apre scegliere l’opzione che si desidera, ma togliere il prefisso del nome) e premere -Esegui-
    - Selezionare il pannello Storia cliccare su Elimina premendo -Si- ogni volta che si apre la finestra di dialogo (Ripetere 8 volte questa operazione sino ad arrivare nella storia alla condizione di partenza. Ho visto che è meglio di Ripristina -F12-)
    - Fermare la registrazione.
    A questo punto, mandando in esecuzione questa Azione, ho raggiunto parzialmente l’obiettivo perché i file così creati mantengono, purtroppo, dei prefissi numerici per evitare probabilmente la sovrascrizione di file (credo senza avviso) nel posto dove vengono creati.
    Per ottenere l’obiettivo occorre un nuovo passo ed a proposito di questo riferisco quanto segue:
    ATTENZIONE - L’operazione descritta qui di seguito deve essere fatta su di una copia del file, per cui:
    - Duplicare il file,
    - Spostare l’originale in altra cartella
    - Lavorare sul file duplicato.
    mi riferisco a questo...
    ATTENZIONE - Questa modifica è effettuata a proprio rischio e pericolo ed il sottoscritto non si assume alcuna responsabilità su quanto venga fatto soprattutto da mani inesperte.
    ATTENZIONE - Questa modifica sovrascrive qualsiasi file che abbia nome uguale al layer che viene selezionato più l’estensione del file naturalmente.
    Comunque la modifica è banalissima e a portata di chiunque.
    Procedere così:
    - Chiudere Photoshop
    - Aprire (nel percorso specificato dall’immagine) il file “Export Layers to Files.jsx” (Export Layers To Files.jsx 1.0.0.16) con un editor di testo puro.
    - cercare la stringa (dovrebbe essere in riga 1029)
    var fileNameBody = fileNamePrefix;
    fileNameBody += "_" + zeroSuppress(i, 4);
    fileNameBody += "_" + layerName;
    - sostituirla con:
    var fileNameBody = fileNamePrefix;
    fileNameBody += layerName;
    - cercare la stringa (dovrebbe essere in riga 1047-46)
    var fileNameBody = fileNamePrefix;
    fileNameBody += "_" + zeroSuppress(i, 4) + "s";
    - sostituirla con:
    var fileNameBody = fileNamePrefix;
    fileNameBody += "";
    - salvare e uscire.
    - riavviare Photoshop
    - provare l’azione registrata facendo attenzione che il nome del layer non sia identico al nome di un file già presente altrimenti questo verrà sovrascritto.
    Domanda:
    Perché ho creato livelli che poi ho eliminato ecc.
    Risposta:
    Semplice per evitare errori di esecuzione delle azioni nel caso di operazioni con livelli mancanti o altro.
    Semplice... no?
    English version
    Mac version, but I think it's the same for Windows.
    First of all, I'm translating the actions that I made using the Italian version of Photoshop, you look at the position of the menu that I have chosen to do the work with other languages.
    I explain step by step what I did:
    - I created a sample file with three layers, saved to the desktop and I closed the file.
    - I opened the file and select the layer at the center to start recording an action that I called: Save with Name of the Selected Layer
    - New action
    - Give the name and press Save ( I think it is so in English )
    Now save ...
    - Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
    - Once again Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
    - Menu -> Layer - > Arrange (order) -> Behind
    - Menu -> Layer - > Merge Down
    - Menu -> Layer - > Merge Visible
    - Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
    - Menu -> Layer - Hide Layer
    - Menu - > Delete - > Delete hidden layers (press -Yes- )
    - Menu -> Layer - > New —> Layer… Enter this: ' Move this to the trash ' and press ok
    - Menu -> File - > Scripts -> Export Layers To Files... (In the window that opens select the option you want, but take away the name prefix) and press - Run -
    - Select the History panel and click Delete (on menu opened) pressing -Yes- every time when open the dialog box (8 times Repeat this step until you get into the story to the starting condition. Not use Restore -F12-).
    - Stop recording.
    At this point, by executing this action, I have reached the goal partly because the files created in this way remain, unfortunately, the numerical prefixes to avoid possibly overwriting of files (I think without notice) in the place where they are created.
    To achieve the goal we need a new step and thinking about this as follows:
    WARNING - The operation described below should be made on a copy of the file, so :
    - Duplicate the file
    - Move the original folder to another
    - Work on the duplicate file.
    WARNING - This modification is performed at your own risk and the undersigned assumes no responsibility on what is done mostly by inexperienced hands.
    WARNING - This change will overwrite any files with the same name as the selected layer plus the file extension of course.
    However, the change is trivial and within reach of anyone.
    Proceed as follows:
    - Close Photoshop
    - Open (in the specified path from the image ) file " Export Layers to Files.jsx " (Export Layers To Files.jsx 1.0.0.16) with a pure text editor.
    - Search for the string (should be in line 1029 )
    var = fileNameBody fileNamePrefix ;
    fileNameBody = + "_" + zeroSuppress (i, 4 ) ;
    fileNameBody + = "_ " + layerName ;
    - Replace it with :
    var = fileNameBody fileNamePrefix ;
    fileNameBody + = layerName ;
    - Search for the string (should be in line 1047-46 )
    var = fileNameBody fileNamePrefix ;
    fileNameBody + = "_ " + zeroSuppress (i, 4) + "s" ;
    - Replace it with :
    var = fileNameBody fileNamePrefix ;
    fileNameBody + = "";
    - Save and exit.
    - Restart Photoshop
    - Try the recorded Action, making sure that the layer name is not identical to the name of an existing file otherwise it will be overwritten.
    Question:
    Why I created levels which I then deleted etc..
    Answer:
    Simple to avoid errors of execution of the actions in the case of transactions with missing levels and other.
    Simple ... is not it?
    Sorry for my bad English...
    Thanks in advance for any hint.
    --->>> Please think about this... Adobe <<<---

  • I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

    I'm using Numbers version 3.2.2.
    Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
    The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

    Also, I tried to open it through an older version of Numbers but it sent this error message.

  • After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

    After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

    I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
    The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
    Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
    May the Force be with you.
    Mark

  • How to open a file with the same name?

    Hi, now I practicing making web pages where I put sample codes in one directory and I copy them to edit.
    The probrem is, I couldn't open one file while I'm opening another file with the same name.
    Is it possible to open  a file with the same name in Dreamweaver?

    That could be a very error prone practice.
    May I suggest you take advantage of DW "Snippets" feature instead.
    Simply save any blocks of code you will reuse regularly as snippets,
    and give each one a descriptive name you like.
    Then you can simply place your cursor in code view where you wish the code,
    and click insert on the selected item from the snippet panel.

  • My links don't work when I combine another file with the pdf

    My internal bookmarked links don't work when I combine another file with the pdf.
    The external links continue to work fine, though.
    This doesn't make any sense to me at all ... but I'm hoping one of you kind folk can help?

    I opened my file and instead of merging files I used insert pages and inserted all of the pages from the file I wanted.  Then I saved the file with
    the same name.  Attached is a rough draft of some helpful hints I put together.  This has been a very painful process for us to discover how to handle
    this and there really is not much help from Adobe.
    Instead of merging files you inset pages. In Acrobat select Document - Insert pages -From file. You can select all pages or some and where you want them inserted. After you do that save the file not save as and all of your links should work. If you combine files or merge files all of the links will break.
                                                                                    GillHarley <[email protected]>                                                                              
    05/07/2009 09:54 AM                                                                                To
                                                                        "Christine Salmon" <[email protected]>                                                                              
    cc
                                Please respond to                                                                              
    [email protected]                                                                                 Subject
                                    dobe.com                            Acrobat Windows My links don't work when I combine another file with the pdf
                                                                        29k833-1Kp0-8ahk                                                                              
    I think it's something to do with naming, but I can't figure out what. This is because it asks to be saved and gives me a Binder no as the name. If I
    press Cancel at that point, I keep the file and the links. But as soon as I need to close it, it asks me again 'Do you want to save this file' and if
    I say 'Yes', I lose all the links, and if yet if I say 'No', I lose the whole file. So at some point it has to be saved but whether I keep the Binder
    no name when I save it, or use the original name, it makes no difference ... it is in the saving of it that it looks the functionality, and yet, if I
    don't save it, I lose the file.
    This makes no sense to me....I hope it does to one of you.
    For instance, Christine, how did you keep your file if you couldn't save it?
    Or have I misunderstood?

  • How to auto insert a number array with size of 20 into a named excel file with the positon is from A1 TO A20?i use lv6.1

    can you give me a example vi for it ?thanks a lot!
    how to auto insert a number array with size of 20 into a named excel file  with the positon is from A1 TO A20?i use lv6.1

    You don't need us to give you an example, as the example already comes with LV. Go to Help>>Find Examples and search for "excel". You will find an example called "write table to XL". You should note that the example doesn't do that exactly, because it writes a 2D array from 2 to N.
    You can modify the example by using only one for loop (instead of nested loops) with a 1D array or by going into the Set Cell Value and modifying it to accept a second cell value for the Cell2 terminal and wiring in a 1D array instead of the single string. If you do modify it, be sure to save it under a different name, so you don't overwrite the original.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
    Try to take over the world!

  • MY system folder, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac) How do I remove them

    I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac).  For the most part the dupes are an exact copy, but not always.  I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas

    pacull,
    Use iCal>View>Show Notifications to choose what to do with the notification.

  • Writing a java program for generating .pdf file with the data of MS-Excel .

    Hi all,
    My object is write a java program so tht...it'll generate the .pdf file after retriving the data from MS-Excel file.
    I used POI HSSF to read the data from MS-Excel and used iText to generate .pdf file:
    My Program is:
    * Created on Apr 13, 2005
    * TODO To change the template for this generated file go to
    * Window - Preferences - Java - Code Style - Code Templates
    package forums;
    import java.io.*;
    import java.awt.Color;
    import com.lowagie.text.*;
    import com.lowagie.text.pdf.*;
    import com.lowagie.text.Font.*;
    import com.lowagie.text.pdf.MultiColumnText;
    import com.lowagie.text.Phrase.*;
    import net.sf.hibernate.mapping.Array;
    import org.apache.poi.hssf.*;
    import org.apache.poi.poifs.filesystem.*;
    import org.apache.poi.hssf.usermodel.*;
    import com.lowagie.text.Phrase.*;
    import java.util.Iterator;
    * Generates a simple 'Hello World' PDF file.
    * @author blowagie
    public class pdfgenerator {
         * Generates a PDF file with the text 'Hello World'
         * @param args no arguments needed here
         public static void main(String[] args) {
              System.out.println("Hello World");
              Rectangle pageSize = new Rectangle(916, 1592);
                        pageSize.setBackgroundColor(new java.awt.Color(0xFF, 0xFF, 0xDE));
              // step 1: creation of a document-object
              //Document document = new Document(pageSize);
              Document document = new Document(pageSize, 132, 164, 108, 108);
              try {
                   // step 2:
                   // we create a writer that listens to the document
                   // and directs a PDF-stream to a file
                   PdfWriter writer =PdfWriter.getInstance(document,new FileOutputStream("c:\\weeklystatus.pdf"));
                   writer.setEncryption(PdfWriter.STRENGTH128BITS, "Hello", "World", PdfWriter.AllowCopy | PdfWriter.AllowPrinting);
    //               step 3: we open the document
                             document.open();
                   Paragraph paragraph = new Paragraph("",new Font(Font.TIMES_ROMAN, 13, Font.BOLDITALIC, new Color(0, 0, 255)));
                   POIFSFileSystem pofilesystem=new POIFSFileSystem(new FileInputStream("D:\\ESM\\plans\\weekly report(31-01..04-02).xls"));
                   HSSFWorkbook hbook=new HSSFWorkbook(pofilesystem);
                   HSSFSheet hsheet=hbook.getSheetAt(0);//.createSheet();
                   Iterator rows = hsheet.rowIterator();
                                  while( rows.hasNext() ) {
                                       Phrase phrase=new Phrase();
                                       HSSFRow row = (HSSFRow) rows.next();
                                       //System.out.println( "Row #" + row.getRowNum());
                                       // Iterate over each cell in the row and print out the cell's content
                                       Iterator cells = row.cellIterator();
                                       while( cells.hasNext() ) {
                                            HSSFCell cell = (HSSFCell) cells.next();
                                            //System.out.println( "Cell #" + cell.getCellNum() );
                                            switch ( cell.getCellType() ) {
                                                 case HSSFCell.CELL_TYPE_STRING:
                                                 String stringcell=cell.getStringCellValue ()+" ";
                                                 writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                 phrase.add(stringcell);
                                            // document.add(new Phrase(string));
                                                      System.out.print( cell.getStringCellValue () );
                                                      break;
                                                 case HSSFCell.CELL_TYPE_FORMULA:
                                                           String stringdate=cell.getCellFormula()+" ";
                                                           writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                           phrase.add(stringdate);
                                                 System.out.print( cell.getCellFormula() );
                                                           break;
                                                 case HSSFCell.CELL_TYPE_NUMERIC:
                                                 String string=String.valueOf(cell.getNumericCellValue())+" ";
                                                      writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                      phrase.add(string);
                                                      System.out.print( cell.getNumericCellValue() );
                                                      break;
                                                 default:
                                                      //System.out.println( "unsuported sell type" );
                                                      break;
                                       document.add(new Paragraph(phrase));
                                       document.add(new Paragraph("\n \n \n"));
                   // step 4: we add a paragraph to the document
              } catch (DocumentException de) {
                   System.err.println(de.getMessage());
              } catch (IOException ioe) {
                   System.err.println(ioe.getMessage());
              // step 5: we close the document
              document.close();
    My Input from MS-Excel file is:
         Planning and Tracking Template for Interns                                                                 
         Name of the Intern     N.Kesavulu Reddy                                                            
         Project Name     Enterprise Sales and Marketing                                                            
         Description     Estimated Effort in Hrs     Planned/Replanned          Actual          Actual Effort in Hrs     Complexity     Priority     LOC written new & modified     % work completion     Status     Rework     Remarks
    S.No               Start Date     End Date     Start Date     End Date                                        
    1     setup the configuration          31/01/2005     1/2/2005     31/01/2005     1/2/2005                                        
    2     Deploying an application through Tapestry, Spring, Hibernate          2/2/2005     2/2/2005     2/2/2005     2/2/2005                                        
    3     Gone through Componentization and Cxprice application          3/2/2005     3/2/2005     3/2/2005     3/2/2005                                        
    4     Attend the sessions(tapestry,spring, hibernate), QBA          4/2/2005     4/2/2005     4/2/2005     4/2/2005                                        
         The o/p I'm gettint in .pdf file is:
    Planning and Tracking Template for Interns
    N.Kesavulu Reddy Name of the Intern
    Enterprise Sales and Marketing Project Name
    Remarks Rework Status % work completion LOC written new & modified Priority
    Complexity Actual Effort in Hrs Actual Planned/Replanned Estimated Effort in Hrs Description
    End Date Start Date End Date Start Date S.No
    38354.0 31/01/2005 38354.0 31/01/2005 setup the configuration 1.0
    38385.0 38385.0 38385.0 38385.0 Deploying an application through Tapestry, Spring, Hibernate
    2.0
    38413.0 38413.0 38413.0 38413.0 Gone through Componentization and Cxprice application
    3.0
    38444.0 38444.0 38444.0 38444.0 Attend the sessions(tapestry,spring, hibernate), QBA 4.0
                                       The issues i'm facing are:
    When it is reading a row from MS-Excel it is writing to the .pdf file from last cell to first cell.( 2 cell in 1 place, 1 cell in 2 place like if the row has two cells with data as : Name of the Intern: Kesavulu Reddy then it is writing to the .pdf file as Kesavulu Reddy Name of Intern)
    and the second issue is:
    It is not recognizing the date format..it is recognizing the date in first row only......
    Plz Tell me wht is the solution for this...
    Regards
    [email protected]

    Don't double post your question:
    http://forum.java.sun.com/thread.jspa?threadID=617605&messageID=3450899#3450899
    /Kaj

  • How do I import old FCP projects that have mysteriously changed to Linux Executable files?  Is it as simple as renaming the files with the.fcp extension?

    I had some FCP projects on an old G3 tower that I finally want to finish. I was able to grab everything, media, etc. to my macbook pro but all of the Final Cut Pro actual movies/projects have turned into "linux executable files" that FCP X won't import.
    I tried googling this issue but didn't really see any good answers. Would it be as simple as renaming the files with the .fcp extension?  I can't recall if my old version (really old) of FCP saves projects as .mov or .fcp files, but I'm assuming I'm not the only person this has happened to.
    Thanks for your help!

    I had some FCP projects on an old G3 tower that I finally want to finish.
    What version of FCP was this? The project files can probably no longer be opened in the newer version of the OS. You could try adding the .fcp suffix, but I don't think it will help for this. Projects files are .fcp.
    Regardless of the version, no legacy FCP projects will import into FCPX.
    Media is a different matter. These are probably QuickTime .mov files. If these are appearing as Unix ececutables, they're probably not recoverable either.

  • Where does Lightroom put HDR in the grid view? Is there anyway to have Lightroom stack the HDR file with the source files?

    I can't decipher where (and why) the program is putting the HDR image in the grid. I stack all of my HDR source images so they are easy to track and manage. Other apps/plugins allow you to stack resulting images with their source image. That would be great if there's a way to set that in LR preferences.

    Thanks, but this doesn't really answer the question about stacking the HDR file with the source files. Yes, it does put the file in the same folder, however many of my folders have 100s of images (that often look similar) and as far as I can tell, LR places them randomly in the sort order. It doesn't appear to put them at the beginning or end of the sort (usually by date), but somewhere randomly in the middle. Even if it could be made clear what method it is using to sort them, that would help locate one file among hundreds.
    Ideally, however it should allow you to stack with the stacked source files. Is there anyway to do this? If not, is it a feature that could be requested?

  • How can I create a file with the excel file type?

    I work with forms 4.5 and I could create "TEXT_IO.FILE_TYPE", but with this I make a I/O TEXT file not a file with the characteristics from a excel file! Can somebody help me please?!?!?
    Best regards,
    Chris from Portugal

    The extension file must be 'CSV' and not 'CVS'. It's better to separate your items by a ';'
    The HOST command you have to execute after creating the file it's HOST(EXEL_PATH SPACE YOUR_FILE) OR Open the DOS PROMPT and type: Exel your_file_name.

  • How can I overwrite a file with the same name in Content DB?

    Hi All,
    In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
    " ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
    And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
    Regards
    Harvey

    Hi All,
    Can anybody from the Content DB product development answer this question?
    Regards
    Harvey

Maybe you are looking for