Gnome-keyring + networkmanager: Not prompting for password

I recently shifted from wicd to networkmanager & I want it to be that way. There is one problem that's troubling me. As a non-root user, if I connect to a new network, the nm-applet doesn't ask for passwords.
The logs say:
2014-07-19T08:29:45.217385+05:30 archlinux NetworkManager[20784]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
2014-07-19T08:29:45.217385+05:30 archlinux NetworkManager[20784]: <info> Activation (wlan0/wireless): access point 'my access point name' has security, but secrets are required.
I run "awesome wm" and I've configured gnome-keyring via the "pam" method & I believe that it works.
➜ 0 /home/shadyabhi [ 9:09AM] % echo $SSH_AUTH_SOCK
/run/user/1000/keyring/ssh
➜ 0 /home/shadyabhi [ 9:09AM] % echo $GPG_AGENT_INFO
/run/user/1000/keyring/gpg:0:1
➜ 0 /home/shadyabhi [ 9:09AM] % ss -xl | grep -o '/run/user/1000/keyring/ssh'
/run/user/1000/keyring/ssh
➜ 0 /home/shadyabhi [ 9:09AM] %
Running "sudo nm-applet" from terminal recognizes gnome-keyring.
➜ 2 /home/shadyabhi [ 8:38AM] % sudo nm-applet
(nm-applet:21840): libnotify-WARNING **: Failed to connect to proxy
(nm-applet:21840): nm-applet-WARNING **: Failed to show notification: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .servi
ce files
nm-applet-Message: No keyring secrets found for "my access point name"/802-11-wireless-security; asking user.
Can anyone help me in finding out what might be wrong? Thanks.

I had the same issue. Turns out I was using SLiM with auto_login enabled, which doesn't unlock the GNOME keyring on login (see this post). Changing auto_login to false solved the issue.

Similar Messages

Gnome screen lock does not prompt for password

Whenever I lock my screen under gnome, I am never prompted for password when unlocking.
Does anyone know how to solve this issue?

Do you have fprintd installed? I ask because I found the following openSUSE bug report: http://lists.opensuse.org/opensuse-bugs … 01518.html

Ipad not prompting for password when trying to access a wireless router

bought new ipad cannot access internet thru wireless router have 2 iphones that work. try to access a protected wireless network but is not asked for password just told cannot access.

This link may be helpful.
http://support.apple.com/kb/TS1398

SSH - Failure to connect, does not prompt for password,

I have been using SSH on this iMac with 10.5.4 for over a year, upgraded to Leopard when it came out, never a problem with SSH, but now for no apparent reason, SSH fails when trying to connect through VPN into work.
I can still connect to other systems on the internet that are not through the VPN.
I don't suspect this to be a VPN issue because no other employees are having this problem with the VPN, using Mac, Windows or Linux. I can connect vi putty on my windows from the same network... below is my config.
Here is what I'm getting:
I connect as- ssh me@hostname and it returns "Permission denied (publickey)." It makes to attempt to prompt me for a password. I do not use a key on this system so it should prompt me for a password. I changed nothing on the system to cause ssh to break, But it's possible that a apple security update caused something to break.
I have added the following to my ~/.ssh/config file
PasswordAuthentication yes
My /etc/ssh_config file is as follows:
cat /etc/ssh_config
# $OpenBSD: ssh_config,v 1.22 2006/05/29 12:56:33 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# GSSAPIKeyExchange no
# GSSAPITrustDNS no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
PermitLocalCommand yes
My /etc/sshd_config is:
cat /etc/sshd_config
# $OpenBSD: sshd_config,v 1.72 2005/07/25 11:59:40 markus Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/sshhostkey
# HostKeys for protocol version 2
#HostKey /etc/sshhost_rsakey
#HostKey /etc/sshhost_dsakey
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/sshknownhosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# SACL options
#SACLSupport yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange yes
# GSSAPI options
#GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server

Also I forgot to mention, I have nulled out the known_hosts file to eliminate any conflicts there, I have verified .ssh is 700 and files config and known_hosts are 600
output using ssh -v
debug1: Reading configuration data /Users/<me>/.ssh/config
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to pshx4105a [216.255.177.213] port 22.
debug1: Connection established.
debug1: identity file /Users/<me>/.ssh/identity type -1
debug1: identity file /Users/<me>/.ssh/id_rsa type -1
debug1: identity file /Users/<me>/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5p1 FreeBSD-20061110
debug1: match: OpenSSH_4.5p1 FreeBSD-20061110 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host 'pshx4105a' is known and matches the DSA host key.
debug1: Found key in /Users/<me>/.ssh/known_hosts:3
debug1: sshdssverify: signature correct
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug1: SSH2MSG_SERVICEACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/<me>/.ssh/identity
debug1: Trying private key: /Users/<me>/.ssh/id_rsa
debug1: Trying private key: /Users/<me>/.ssh/id_dsa
debug1: No more authentication methods to try.

HT203783 Safari and iCloud Keychain not prompting for password

In Safari 8.0 (Yosemite) a prompt appears telling me to turn on iCloud Keychain to have a secure password suggested. I already have it on and all autofill boxes are enabled in Sarari. What is missing to have it suggest the password?

The way to check is to go to Control Panel and search for "iCloud". If iCloud appears (see first image below), double-click on it. This will be the iCloud control panel for Windows. If he is syncing his computer with his iCloud account it will look similar to the second image below.

Outlook 2007 Clients Prompt For Password When Opening

I am running Exchange 2007 Standard. New outlook 07 clients prompt for password each time it is opened. Older clients do not prompt for password. Is there any way for outlook 07 to not prompt for password? Users already logged into domain, should their credentials not be recognized automatically like with outlook 03?

This fixed it for me.
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/383d130e-869f-4fce-9502-8b340904b0ba/#636c5a5e-c61f-414b-8e85-562c888b83cc
Quote:
Same problem here after restarting SBS 2008 for upgrades (annoying login box popping up after starting Outlook and also other times).
This solved the problem for me:
IIS Mgr on SBS 2008 / - / SBS Web Applications /
- SSL Settings / Client certificates - Stop / Start web server after changing settings:
Autodiscover: Ignore
EWS: Ignore
OAB: Accept *)
owa: Accept *)
Rpc: Accept *)
RpcWithCert: Accept *)
*) All these have to be Accept to get rid of login box
Best regards
Bjorn
I was having the same issue. SBS2008, Exchange 2007. Only being prompted in Outlook 2007 clients. Tried a lot of different things to fix it, but none worked. This started happening after a round of security updates but I could not find KB2412171 on the list.

[SOLVED] gnome-keyring-daemon not loading SSH key password on login

I have a SSH key that I use extensively that has a cumbersome password that I prefer not typing when possible. I know that gnome-keyring-daemon is supposed to have the ability to save the SSH key password, unlock the Passwords:logins, and act as an SSH agent; however, that functionality appears to be missing. There's a strong possibility that I broke this trying to get other things working in GNOME.
Is there a D-Bus or PolicyKit option that I need to change?
Solution:
Turns out this is now handled by pam. The password key store would unlock automatically if I used gnome-screensaver but failed to unlock on X startup so I installed GDM.
Last edited by Yorokobi (2009-10-31 17:04:50)

More info. I have been able to get gnome-keyring-daemon to ask for and store the password when I first use the SSH key. The dialog box for entering the SSH key password does not have an option to save the password indefinitely (I forget the exact verbiage) and I can't find anything in Seahorse to do the same.

Notes keeps prompting for password

Hello,
I have a PowerMac (10.7), a MacBookPro (10.8), an iPhone (iOS 5) and a MacMini (10.6.8 Server). I have a user account Smith on the server and Mail service is activated. All my devices are configured to exchange notes through the server, using Smith account.
When I create a note on my PowerMac in Mail, the synchronization works and I can see the note on my iPhone. Sync also works on the other way.
But when I create a note on my MacBook, Notes keeps prompting me for the Smith account password every minute. And the sync does not work because I don't see my notes on my iPhone. Sync also does not work on the other way. But no problem with Mail which uses the same Smith account : I can send and receive emails (and I am not prompted for my password).
I tried to syncrhonize Notes with another mail account on my web provider and it works. I can create a note on my MacBook and see it on my iPhone.
It seems that Notes only fails to sync when I use an account on my server. This is a regression compared to Lion : Notes and OSX 10.6.8 seem incompatbile.
Any idea about the problem ? I saw that there are sync problem with Notes but nobody seems to have this password problem.
Thanks for your help.
Eric.

You can disable the password protection when downloading apps (Dont know where is that in settings, cos my iPad is bricked).
Technically, this is made for security, so that noone can download any unwanted app or charge any unwanted money from paid apps.

3?'s: Message today warning lack of memory when using Word (files in Documents) something about "idisc not working" 2. Message week ago "Files not being backed up to Time Capsule"; 3. When using Mac Mail I'm prompted for password but none work TKS - J

3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - J

Thanks Allan for your quick response to my amateur questions.
Allan:     I'm running version Mac OS X Version 10.6.8     PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067   MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me!    - John Garrett
PS.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i5
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0C
SMC Version (system):          1.58f17
Serial Number (system):          W8*****AGU
Hardware UUID:          *****
Sudden Motion Sensor:
State:          Enabled
<Edited By Host>

HT1595 Will not prompt for new password, if invalid password was entered

Will not prompt for a new password after an invalid password was entered

I am installing a Apple TV, when I select my router from the list it prompted me for the password. I entered an old password in error, so it would not connect. Now when I reselect my router it does not prompt for a new password, it uses the old incorrect one and does not connect. I need to be able to re-enter the correct one.

Gnome-keyring-daemon crashes when blank passwords are entered.

Steps to reproduce:
Install fresh Arch Linux
Install chromium, gnome, xorg-server, and xorg-xinit
Put "exec gnome-session" in ~/.xinitrc
Launch startx
Open chromium
On prompt for new keyring creation, leave password fields blank and press OK.
Witness gnome-shell crashing.
What's supposed to happen:
It's supposed to prompt the user asking if it's OK to have unencrypted keys.
What happens:
The gnome-shell crashes, and no keyrings or passwords were set or created.
journalctl output:
Sep 04 21:11:04 Winston gnome-session[1417]: Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Sep 04 21:11:04 Winston gnome-session[1417]: Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
Sep 04 21:11:14 Winston gnome-session[1417]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1600029 (New Tab - )
Sep 04 21:11:14 Winston gnome-session[1417]: Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Sep 04 21:11:18 Winston gnome-keyring-daemon[1478]: keyring alias directory: /home/naelstrof/.local/share/keyrings
Sep 04 21:11:31 Winston gnome-session[1417]: ** Message: init gpgme version 1.4.3
Sep 04 21:11:31 Winston gnome-session[1417]: ** Message: DNS-SD initialization failed: Daemon not running
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_set_color: assertion `CLUTTER_IS_TEXT (self)' failed
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_set_cursor_size: assertion `CLUTTER_IS_TEXT (self)' failed
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_set_cursor_color: assertion `CLUTTER_IS_TEXT (self)' failed
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_set_selected_text_color: assertion `CLUTTER_IS_TEXT (self)' failed
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_get_font_name: assertion `CLUTTER_IS_TEXT (text)' failed
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_set_font_name: assertion `CLUTTER_IS_TEXT (self)' failed
Sep 04 21:11:38 Winston gnome-session[1417]: (gnome-shell:1494): Clutter-CRITICAL **: clutter_text_get_font_name: assertion `CLUTTER_IS_TEXT (text)' failed
Sep 04 21:11:38 Winston gnome-keyring-daemon[1478]: prompting failed: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Sep 04 21:11:38 Winston gnome-session[1417]: WARNING: Application 'gnome-shell.desktop' killed by signal 11
Sep 04 21:11:38 Winston gnome-session[1417]: gnome-session[1417]: WARNING: Application 'gnome-shell.desktop' killed by signal 11
Sep 04 21:11:38 Winston gnome-session[1417]: ** Message: applet now removed from the notification area
Sep 04 21:11:39 Winston gnome-session[1417]: JS LOG: GNOME Shell started at Wed Sep 04 2013 21:11:39 GMT-0600 (MDT)
Anyone got any tips to what could be wrong? It's infuriating to have it ask to create a new key, while it won't let me set a blank key.
Giving the prompt an actual password works as intended, it's impossible to set it as a blank password, even using seahorse.
It's acting as if something is wrong with DBus, but journalctl -u dbus shows no problems. as well as systemctl status dbus.
Thanks for any help.
Oh yeah and attempting to use gdm causes the gnome-session not to launch at all. Since gdm created a key, I'm guessing the problems are related.
Last edited by naelstrof (2013-09-05 03:27:50)

I found an acceptable workaround:
Create a keychain with the same password as your account named "Login" using the keychain utility seahorse.
Follow the autologin instructions for console based login here: https://wiki.archlinux.org/index.php/GN … at_Startup
Restart X.
gdm still fails to start x though, despite the startx command working fine.
Uninstalling gnome-keychain works just as well though :u.
Last edited by naelstrof (2013-09-05 05:39:09)

Why does Outlook keep prompting for password

We have seen our community members ask questions about Outlook keeps prompting for credentials many times. This issue could be caused by numerous reasons. Below is a list of the most common reasons for this problem:
Outlook is configured to prompt you for credentials
Incorrect password cached in credential storage
Required Authentication Settings for outgoing server and incoming server
Outlook Anywhere is not configured to use NTLM Authentication
Corrupt Outlook profile
Slow or unstable network connection
Antivirus programs
Shared calendars
Outlook is configured to prompt you for credentials
If you are using an Exchange account, there is a setting in your Outlook profile to always prompt for logon credentials. To find the setting, please follow:
1. In Outlook 213, go to File tab > Info >
Account Settings > Account Settings…
2. Highlight your Exchange account and click Change button.
3. Click on More Settings button.
4. Select the Security tab.
5. Under the User Identification, make sure the “Always prompt for logon credentials” option is not selected.
If you are using other types of email, please make sure you have ticked the option “Remember password”.
Incorrect credential cached in Credential Manager
Your Windows system stores user credentials on your computer. If the cached credentials are incorrect, you will be prompted for password. This issue usually happens after the password for your domain user account is changed. Before your password changed,
you saved your credentials. The stored credentials are not overwritten when Outlook triggers the authentication prompt even if you enable the Remember my credentials option.
To fix this issue, you need to remove the corrupted credentials, follow these steps:
Click Start, click Control Panel, and then click Credential Manager.
Note If View by is set to Category, click User Accounts first, and then click Credential Manager.
Locate the set of credentials that has Outlook in the name.
Click the name to expand the set of credentials, and then click Remove from Vault.
Repeat step 3 for any additional sets of credentials that have the word Outlook in the name.
Required Authentication Settings for outgoing server and incoming server
Different email provider may need different authentication settings. Please make sure you have set the server settings correctly. You can contact your email provider to gather the information.
In general, we select the “My outgoing server (SMTP) requires authentication” option and the first bullet “Use same settings as my incoming mail server”.
In addition, click on the Advanced tab and check if you have enter the correct Server Port Number and select the correct encrypt type. Below is a screenshot for an IMAP account:
Outlook Anywhere is not configured to use NTLM Authentication
The Outlook Anywhere feature allows you to access your Exchange account remotely from the Internet when you are working outside your organization's firewall.
When using Outlook Anywhere to connect to your Exchange server, we need to choose
the authentication method among Basic Authentication, NTLM Authentication and Negotiate Authentication. The difference among them is the way that the passwords are sent when connecting to the server. With Basic Authentication,
the password is sent in clear text. Using NTLM Authenticationcan significantly reduce the number of password prompts.
To check the authentication setting, please go to File > Account Settings > Account Settings,
select the Exchange account, and then click
Change. In the Change Account wizard, click
More Settings, and then click the Connection tab. Click the Exchange Proxy Settings button and now, you can see the settings under
Proxy authentication settings. Try to change the authentication to
NTLM Authentication and then check the issue again.
Slow or unstable network connection
If your network connection is slow or unstable, Outlook may lose connection to the mail server. When Outlook try to reconnect, it will prompt for the credentials. To verify this, please switch to a stable network environment and then check if this issue
persists.
Corrupt Outlook Profile
Corrupt profile may cause Outlook to no longer remember your password. Please try to create a new mail profile in Control Panel and reconfigure your email account in the new profile to fix the issue. To create a new mail profile, you can refer:
http://support.microsoft.com/kb/829918
Antivirus software
Antivirus software usually integrates into your Outlook and it may cause some conflicts. Try to temporarily turn off your antivirus software to check if the issue will be gone.
Shared Calendar
Shared calendars can impact the user credentials, this issue may also occur if you have shared calendars opened in Outlook. You can try to unselect the shared calendar to check the result. It’s recommended to not open the shared calendar unless you want
to view them.
If you have any comments, welcome to post in the forum. Thank you.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nope...
I went through point by point by point, top to bottom, checking and verifying every single item as a possible cause for why my system (Outlook 2013 running on Windows 8.1 and connecting to Exchange 2010) insists on prompting me for my password every single
time I start Outlook. None of the solutions worked, my system still prompts me. I don't even have to supply a password. When the prompt dialog appears, I just cancel it. Within a few seconds, the bottom Outlook status bar changes to
"Need Password" with a key icon to the left. Then I just click on that message and immediately Outlook connects to Exchange.
The freaking software is BROKEN! Period.

I cannot download an app from the app store, it keeps loading until it says "You have already purchased this app so it will be downloaded no at no additional charge", and then it prompt for password and I input it after which nothing happens.

I cannot download an app from the app store, it keeps loading until it says "You have already purchased this app so it will be downloaded no at no additional charge", and then it prompt for password and I input it after which nothing happens.
I know my icloud has record of my installing this app before, but that was the first install that was failed during that time some other apps also keeps loading without respond whey they updated itself, and this app didn't install before I restart the device. But I don't see this app on my device after I restarted the device so it should have been installed on my device. It seems icloud has created some kind of dead loop that makes it not able to get the correct status about this app on my device.
I have no problem install this app on my other device (iPad) with the same account, but just fail on my iPhone. And it just fine installing other apps...... What happened !!?? @@
Please help !!!

Someone help! I dont know how to do this and please put the words into an easy way to understand because im young...

XFA Pdf form call secure webservice without prompt for password

Hi,
We are using XFA forms within the company. We have created many (400+) interactive forms with fields to fill manually.
Now the business would like to lookup account details. They want user to be able to enter account number and then lookup details through webservice.
The webservice is created on HOST/CICS and in COBOL. We need security on HTTPS and we cannot accept that the user is prompted for password.
Our security department state that normal practice is to use KERBEROS token that gets authenticated later - is that possible with Adobe Reader??
Have anyone developed this functionality within XFA forms and Adobe Reader?
Thanks in advance,
Thomas Groenbaek

Reader can make Web Service calls but the form must be Reader Extended by LiveCycle Server to allow this. It does support secure web service calls but it does uid/pwsd or certificate authentication. Note that the web service can only return simple types. Objects cannot be returned.
Paul

How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

Thank you for the help, have sorted it through Restrictions in General settings now : )
No more mysterious app purchases on my c.card now thank god !!
You would think they would set as default that Password was required - Imediatly . But they know there likely to get more purchases the way the default set it..
Thanks again for prompt reply!!!

Gnome-keyring + networkmanager: Not prompting for password

Similar Messages

Maybe you are looking for