Going for a short overseas trip...how do you extend services beyond U.S. temporarily??

I'll be gone for just two weeks. Is there a plan or a way to upgrade to international calls just for the short duration?

Hi and welcome to the forums. For two weeks of travel, I would add the global calling plan. It's $4.99/month and gets you a slightly cheaper rate on voice calls. International text messages stay the same rate (50 cents to send, 5 cents to receive). Cancel your global plan when you return and you'll be credited the unused weeks.
If you plan to use data, including sending or receiving picture messages (counts as data when it's international), get the $25/100MB international data plan. You'll be refunded for the MBs you don't use. Otherwise, turn off cellular data or you'll be charged $20.48/MB!
Which phone do you have and which countries are you going to? This will determine whether your phone will even work. (There's a good trip planner tool on this site, too, under global services.) Oh, and don't forget to enable international dialing (and activate your SIM card if you're using a global phone in a GSM country). When you call global customer service to arrange all this, they will send you a helpful e-mail with rates and instructions for dialing out.
Happy travels!!!!

Similar Messages

For Adobe Acrobat X Pro how do you change font size Acrobat in form editing mode?

For Adobe Acrobat X Pro how do you change the font size when Acrobat is in Form Editing Mode? The fonts are different sizes in the highlighted fields. I want the font the same size throughout my document...

Dear Michael:
The documents do not look professional with the 2 different font sizes. And it
is driving me crazy because I cannot figure it out… But I will try the steps you
gave me to change the font size. Attached via e-mail is a screanshot of the
document.
Sincerely, Lisa

I keep getting the error 40 for my iphone 3GS restore how do you fix it

I keep getting the error 40 for my iphone 3GS restore how do you fix it

https://discussions.apple.com/thread/3740515?start=0&tstart=0

How do you change service from your old LG phone to a iPhone 4S without going into pioneer

How do you change service from your old LG phone to a iPhone 4S without going into pioneer

I would call Pioneer and ask them if you can do that.

HT1657 I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

TS1362 I have downloaded the song "Bruises" by Band of Skulls and it plays to about 1.20 remaining and then just stops and goes to the next song. How do you fix this?

I have downloaded the song "Bruises" by Band of Skulls and it plays to about 1.20 remaining and then just stops and goes to the next song. How do you fix this?

I removed the song from the itunes library and then added it again, but the same issue still exists.
I'd report the problem to the iTunes Store, then.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Hey for the new iOS 5 how do you backup your information when you download updates without a computer?

Hey for the new iOS 5 how do you backup your information when you download updates without a computer?

Read here > http://appadvice.com/appnn/2011/06/overtheair-wifi-syncing-backup-ios-5-tedious- routine

How do you extend the guest network on a time capsule to an apple express?

I have a time capsule in my main house with a password protected guest network i set up an apple express in the guest house to extend the networks. Unfortunately the guest house / apple express is only amplifying the main house network. I would like my tenant to join the guest network from apple express. Is that possible?
How do you extend the guest network on a time capsule to an apple express?

I would like my tenant to join the guest network from apple express. Is that possible?
Sorry, but Apple does not allow the Guest Network to be extended in any way.

How do you extend the frame from one side but not the whole thing?

I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark

Developing for all four iPhone resolutions - how do you go about it?

With iPhone 6 out, developing for both iPhone 4, 5, 6 and 6 plus is a must. I'm pretty new to considering adaptive interfaces / content when developing apps, so I'm looking for strategies on how to approach it.
My current case example is a graphic novel-type app. The development process is going to be short, so I'm looking to make an app that just displays in fullscreen on all phones, not necessarily taking advantage of the higher pixel densities. A lot of the content is bitmap pages that need to take up the full screen on all resolutions.
So what are your general strategies for going about this? As I see it, the first issue is the two different aspect ratios. The iPhone 4 is 3:2 whereas all the others are 16:9, so my idea is to first detect if the ratio is 3:2 or not, and make the app either adapt to iPhone 4 or iPhone 5 depending on the result. Apple's automatic scaling of older apps should then take care of scaling up to iPhone 6 and 6+. Correct?
Secondly, what is the next step? Do I save all the bitmap pages of my graphic novel in a 640x960 version (iPhone 4) and a 640x1136 version (iPhone 5) separately, then load the right one at runtime depending on the aspect ratio detected?
Thirdly, if I work in Flash Pro with a 960x640 canvas size, do I then load the correct bitmap version and place it in the top left corner of the canvas because it will then extend to all the edges of the screen - or do I 'center' the iPhone 5 version outside the canvas to make it fit? (Meaning do I place the content at x = 0 for the iPhone 5 version, or at x = - ((1136 - 960) / 2) ?
I hope these questions make sense, especially the last one, and would like to hear how you would approach a project with a short deadline which just needs to run fullscreen on all iPhones.

Do you have different versions of the graphic novel pages, or is there just one version of the page? If there is one version, can you crop into the page without losing anything important?
I would guess that there is one version, and that cropping into the page will lose something important. If that's the case, here's how I would handle it:
Make a stage that is 14:9. The size doesn't matter, but 1400x900 could be a good starting point.
Put down a background texture that fits well with the look of the other images. Make that fill the 1400x900 stage.
Place your page graphics so that they are within the center 1200x788 area of the stage.
Set the stage scalemode to "noBorder".
You now have a layout that will work on all devices, as narrow as iPad, and as wide as iPhone 5. All without any code. On the widest devices you'll see a bit of your background pattern to the left and right of the page graphic. On the narrowest devices you'll see a bit of background pattern above and below the page graphic. But you won't lose sight of anything important.

When you sighn in and out of an ios device some of the data fom the device sighned in stays after sighning out. Is this the same for PC and if so how do you delete all the data from my icloud from the pc

When sighning in and out of an ios device some of the icloud data from the icloud account used to sighned in stays even after sighning out. Is it the same on pc icloud and if so how do you delete it. ( This is the online site by the way.)

Hi turintest2
Thanks for taking the time to respond - however your reply didn't really help as you haven't explained how to delete the compilation album that had been created.
I managed to sort it out by doing the following (I'm posting this so that it may help others). I don't know if this is the simplest/most elegant solution - but it works.
In iTunes, find the compilation (in my case, the 153 songs) and, starting with the first song, follow this procedure:
On the iPhone go to 'Songs' and scroll down the list until you find the first song that was listed in iTunes (above). You should notice (as in my case) that the song will have the correct title (and artwork too if you'd found this previously before making the compliation) but the wring artist.
Swipe LEFT and press the 'Delete' button.
Repeat with second song in iTunes list, deleting the individual songs from the iPhone, one by one.
Although tedious, this seemed to work for me. Reason for doing down the iTunes list is that it is in a pseudo-alphabetical order and I wanted to make sure I'd got every one.
Now busy re-importing the original albums from CD.
Thank you APPLE for making this such a laborious process. Why can't designers actually TEST the products they design so that they can appreciate first-hand the likely problems?
Anyhow, thanks turintest2 for trying to help me - it was appreciated.
RB

I want to move my service to another carrier due to a better deal for the same plan. How do you figure out the ETF's??

I can save some money by switching, just want to make sure my ETF's are not more than they will cover when I switch?? Not sure how to calculate that number though....Thanks

http://www.verizonwireless.com/b2c/support/customer-agreement
WHAT HAPPENS IF MY POSTPAY SERVICE IS CANCELED BEFORE THE END OF MY CONTRACT TERM?
If you're signing up for Postpay Service, you're agreeing to subscribe to a line of Service either on a month–to–month basis or for a minimum contract term, as shown on your receipt or order confirmation. (If your Service is suspended without billing, that time doesn't count toward completing your contract term.) Once you've completed your contract term, you'll automatically become a customer on a month–to–month basis for that line of Service. If you cancel a line of Service, or if we cancel it for good cause, during its contract term, you'll have to pay an early termination fee. If your contract term results from your purchase of an advanced device, your early termination fee will be $350 minus $10 for each full month of your contract term that you complete. Otherwise, your early termination fee will be $175 minus $5 for each full month of your contract term that you complete. Cancellations will become effective on the last day of that month's billing cycle, and you are responsible for all charges incurred until then. Also, if you bought your wireless device from an authorized agent or third–party vendor, you should check whether they charge a separate termination fee.

Transparency needed for Ai T-shirt logo - How do you do this for cmyk print?

I have a logo created in Ai CS4 and it need to have a transparnt background (no white) because it will be printed on t-shirts, some not white, and a business card, but on other than white paper. What file format should I save this in for there to be both Transparency and in CMYK format for print?
Is there a rule to remember when I want transparency AND I am going to print in CMYK?
PNG seems to give the trans, but it says it is RGB color. Is this what I would have to send to a printer? Is this correct?
In PS, it was fine to save with transp, but what is the best method, I am so very confused - Any experts out there?

There is no need for raster "transparency" in order to "eliminate the white background" in a project desitined for CMYK printing. There is no white ink involved. There is no process color channel in a CMYK raster image.
In other words, white in the Illustrator document (and white pixels in a CMYK raster image) do not mean "white"; they mean "no ink." So obviously, where no ink is printed, the color of the substrate (be it paper or textile) "shows through".
For textile printing of process color, however, it is often necessary to create a separation plate for white ink, because CMYK process assumes translucent inks, which do not show up well on dark substrates. In such a situation, it becomes necessary to create a separate image that will be actually be printed with an opaque white ink; the CMYK process colors are then printed on top of that. But doing that involves deliberately setting up a spot color in Illustrator, and/or a separate channel in the raster image(s). A normal CMYK or RGB image, when color-separated, does not produce a spot white plate just because there are white pixels in the image.
It's common-sense if you think about in physical terms. You have an image consisting mostly of blue and green. If you were to actually paint this on, say, a pastel yellow shirt, and did not want a white background, what would you do? You'd paint with some blue paint. You'd paint with some green paint.
Or, think of it this way: Print the image to a white piece of paper in your desktop inkjet printer. What does the printer do? It prints little dots of Cyan, Magenta, Yellow, and Black inks. Does it print little dots of white ink if you instead insert a piece of colored paper? Of course not. The printer has no idea what color the paper is, and even if it did, it couldn't automagically generate white ink.
Your post suggests you do not want a white background or underlay. If I were preparing that image for screen printing on textiles, I would not print it as CMYK process. I would make it a 2-channel image, and print it with an opaque blue and an opaque green ink. That would work for all but dark substrates. If you are printing this onto pastel substrates, it will likely work fine even if printed using CMYK process inks.
JET

Sent iphone 5 3x for repair ( 1 repair and 2 replacement ) in a span of 2 months.. And i just ask apple care to extend the warranty of my replacement iphone 5 for 6 month, i mean how can you trust the 2nd replacement if the 1st replacement didnt last long

Sent iphone 5 3x for repair ( 1 repair and 2 replacement ) in a span of 2 months.. And i just ask apple care to extend the warranty of my replacement iphone 5 for 6 month and they reject it, i mean how can you trust the 2nd replacement if the 1st replacement didnt last even for just 1 month? Really dissapointed!!

No, really just want to voice out my dissapointments with apple care.. Im just really ****** off..

HT1338 I use iCal for the first time. How do you update it without needing to update all programs of your computer?

I use ical for the first time, how do you update the programm without updating for 2 hours all other programms

From the iCal Help Menu in the Tool Bar...
Changing or deleting an event
You can change the time, day, alarm, or any other settings for any events you’ve created, or you can delete an event.
You can’t change the events on a calendar you’ve subscribed to (subscribed calendars appear in your Calendar list under the heading “Subscriptions”), and you can only change the calendar, status, and alarms for events you’ve been invited to.
To change or delete an event:
To change the time or day of an event you’ve created, drag the event to the new time or day in the main calendar view.
To change an event’s duration, drag the event’s top or bottom edge. (You can resize events only in Day or Week view.) If the event is an all-day event, in Week view, drag the left or right side of it.
To change the name of an event, double-click it. If necessary, click Edit to open the event editor. Select the event name, type a new name, and then click Done. (You can also change the name of an event without opening the event editor by holding down the Option key while you double-click the event name.)
To edit other characteristics of an event (for example, how often it repeats or whether it has an alarm), double-click the event. If necessary, click Edit to open the event editor. Make your changes.
To delete an event, select the event and press the Delete key on your keyboard.
If you’re changing an event to which you’ve invited other people, you need to send an updated event to the invitees by clicking Send in the event editor

Going for a short overseas trip...how do you extend services beyond U.S. temporarily??

Similar Messages

Maybe you are looking for