GoldenGate replication of creating users, roles

System Specs:
O/S : RHEL 5 (Tikanga)
RDBMS: 11.2.0.3 (Standalone, ASM, Archivelog)
GoldenGate v:11.1.1.0 (getting ready to upgrade to v11.1.1.2 (want to utilize the ADD SCHEMATRANDATA and updated sequence support)
I have read the documentation in GG that says that DDL support Oracle restricted schemas is not supported (including sys and system). From this document a create statement is considered DDL.
However, I have to think that when a user or role is created on the Source that you want that action replicated to the Targets? So you don't have to rerun the action on the number of targets you have. This is the benefit of replication, correct?
Without this ability replication is somewhat restrictive.
Please someone shed some light on how a user/role statement could be replicated?
Thanks!
Jason

Okay, so I reviewed the documentation and need some help in replicating DDL for 2 schemas.
Here is my Extract and Replicat modules
EXTRACT EXT1
USERID ggs_owner, PASSWORD ggs_owner
RMTHOST db2, MGRPORT 7809
RMTTRAIL /home/oracle/goldengate/dirdat/gg
---ddl---
DDL INCLUDE MAPPED
---dml---
table schema1.*;
table exclude schema1.*_sq;
REPLICAT REP1
ASSUMETARGETDEFS
USERID ggs_owner, PASSWORD ggs_owner
DDL INCLUDE MAPPED
DDLERROR DEFAULT IGNORE RETRYOP
REPERROR (1403, DISCARD)
MAP schema1.*, TARGET schema1.* ;
MAP schema2.*, TARGET schema2.*;
My issue is that ddl replication is only working for schema1. No ddl is being replicated with schema2. I know there must be a something small I am overlooking.
I was successful with
DDL INCLUDE ALL, EXCLUDE "schema3.*, EXCLUDE "schema4.*", EXCLUDE "schema5.*", etc...
However, I don't want to list out every schema that could potentially perform ddl. I would think the DDL INCLUDE MAPPED and then include those schemas that you want mapped.
Any ideas?

Similar Messages

Modify Script to Create User Role on Single Database.

Hi All,
Below is the script to create user role on database. Here problem is when I execute this script, it creates user role for all database within an instance and I want it to create user role only on 2 database say TEST1 and TEST2
Can anyone help me to modify the script?
--===================================================================================
-- Description
-- Database Type: MSSQL
-- This script creates a role called 'gdmmonitor' for ALL databases.
-- It grants some system catalogs to this role to allow Classification and Assessment on the database.
-- It then adds a user called "sqlguard" to all databases and grants this user gdmmonitor role.
-- before runnign this script
-- you MUST CREATE A SQL LOGIN CALLED 'sqlguard'
-- This sqlguard login doesn't need to be added to any database or given
-- any privilege. The script will take care of that.
-- Note:
-- If you wish to use a different login name (instead of 'sqlguard') you need to change
-- the value of the variable '@Guardium_user' in the script below;
-- (Look for the string: "set @Guardium_user = 'sqlguard'" and replace the 'sqlguard')
-- after runnign this script
-- Nothing to do, the script already creates the db user
-- User/Password to use
-- User: sqlguard (or any other name, if changed)
-- Pass: user defined
-- Role: gdmmonitor
--===================================================================================
PRINT '>>>==================================================================>>>'
PRINT '>>> Creating role: "gdmmonitor" at the server level.'
PRINT '>>>==================================================================>>>'
-- Change to the master database
USE master
-- *** If a different login name is desired, define it here. ***
DECLARE @Guardium_user AS varchar(50)
set @Guardium_user = 'sqlguard'
DECLARE @dbName AS varchar(256)
DECLARE @memberName AS varchar(256)
DECLARE @dbVer AS nvarchar(128)
SET @dbVer = CAST(serverproperty('ProductVersion') AS nvarchar)
SET @dbVer = SUBSTRING(@dbVer, 1, CHARINDEX('.', @dbVer) - 1)
IF (@dbVer = '8') SET @dbVer = '2000'
ELSE IF (@dbVer = '9') SET @dbVer = '2005'
ELSE IF (@dbVer = '10') SET @dbVer = '2008'
ELSE IF (@dbVer = '11') SET @dbVer = '2012'
ELSE SET @dbVer = '''Unsupported Version'''
IF (@dbVer != '2000')
BEGIN
-- This privilege is required to peform a specific MSSQL test.
-- Test name: SQL OLEDB disabled (DisallowAdhocAccess registry key)
-- Procedure execute: EXEC master.dbo.sp_MSset_oledb_prop
-- Purpose: To display provider property, not changing anything.
PRINT '==> Granting MSSSQL 2005 and above setupadmin server role'
EXEC master..sp_addsrvrolemember @loginame = @Guardium_user, @rolename = N'setupadmin'
END
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if they exist
CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL)
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND mbr.groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the role gdmmonitor on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the role gdmmonitor on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.spt_values TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysconfigures TO gdmmonitor
GRANT SELECT ON dbo.sysdatabases TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syslogins TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
-- Grant execute privileges to the role for MSSql Common
PRINT '==> Granting common EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON sp_helpdbfixedrole TO gdmmonitor
GRANT EXECUTE ON sp_helprotect TO gdmmonitor
GRANT EXECUTE ON sp_helprolemember TO gdmmonitor
GRANT EXECUTE ON sp_helpsrvrolemember TO gdmmonitor
GRANT EXECUTE ON sp_tables TO gdmmonitor
GRANT EXECUTE ON sp_validatelogins TO gdmmonitor
GRANT EXECUTE ON sp_server_info TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sql_logins TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
GRANT SELECT ON sys.server_role_members TO gdmmonitor
GRANT SELECT ON sys.configurations TO gdmmonitor
GRANT SELECT ON sys.master_key_passwords TO gdmmonitor
GRANT SELECT ON sys.server_principals TO gdmmonitor
GRANT SELECT ON sys.server_permissions TO gdmmonitor
GRANT SELECT ON sys.credentials
TO gdmmonitor
--This is called by master.dbo.sp_MSset_oledb_prop.
--By defautl it should have already been granted to public.
GRANT EXECUTE ON sys.xp_instance_regread TO GDMMONITOR
GRANT EXECUTE ON sys.sp_MSset_oledb_prop TO GDMMONITOR
END
-- Re-add the dropped members
IF EXISTS (SELECT 1 FROM #rolemember)
BEGIN
PRINT '==> Re-adding the role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- END of role creation on database
PRINT '==> END of role creation on: ' + @dbName
PRINT ''
-- Change to the msdb database
USE msdb
set @memberName = ''
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if it exists
TRUNCATE TABLE #rolemember
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM .dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the gdmmonitor role on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the gdmmonitor role on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
GRANT SELECT ON dbo.backupset TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
-- Grant execute privileges to the role for MSSql 2005 or above
PRINT '==> Granting MSSql 2005 and above EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON msdb.dbo.sp_enum_login_for_proxy TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
END
IF (@dbVer > '2000' and @dbVer < '2012')
--This sp is not available in SQL 2012
BEGIN
GRANT EXECUTE ON sp_get_dtspackage TO gdmmonitor
END
-- Re-add the dropped members
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Re-adding the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the temporary table
DROP TABLE #rolemember
-- END of role creation on database
PRINT '==> END of gdmmonitor role creation on: ' + @dbName
-- Role creation complete
PRINT '<<<==================================================================<<<'
PRINT '<<< END of creating role: "gdmmonitor" at the server level.'
PRINT '<<<==================================================================<<<'
PRINT ''
PRINT '>>>==================================================================>>>'
PRINT '>>> Starting application database role creation'
PRINT '>>>==================================================================>>>'
use master
DECLARE @databaseName AS varchar(80)
DECLARE @executeString AS varchar(7950)
DECLARE @dbcounter as int
set @dbcounter = 0
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases where name not in ('master', 'msdb')
and not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @dbcounter = @dbcounter + 1
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'PRINT ''>>> Starting MSSql ' + @dbVer + ' role creation on database: ' + @databaseName + ''' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'/* Variable @memberNameDBname must be declare within the string or else it will fail */ ' +
'DECLARE @memberName' + cast(@dbcounter as varchar(5)) + ' as varchar(50) ' +
'/*find any members of the role if it exists*/ ' +
'CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL) ' +
'INSERT INTO #rolemember ' +
'SELECT DISTINCT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr ' +
'WHERE usr.uid = mbr.memberuid ' +
'AND groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'/*Drop the Role Members If they exist*/ ' +
'IF EXISTS (SELECT * FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Dropping the role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Dropping member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_droprolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/*drop the role if it exists*/ ' +
'IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'BEGIN ' +
'PRINT ''==> Dropping the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_droprole ''gdmmonitor'' ' +
'END ' +
'/* Create the role */ ' +
'PRINT ''==> Creating the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_addrole ''gdmmonitor'' ' +
'/* Grant select privileges to the role for MSSql Common */ ' +
'PRINT ''==> Granting common SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON dbo.sysmembers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysobjects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysprotects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysusers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON dbo.syspermissions TO gdmmonitor ' +
'/* Check if the version is 2005 or greater */ ' +
'IF (' + @dbVer + ' != ''2000'') ' +
'BEGIN ' +
'/* Grant select privileges to the role for MSSql 2005 and above */ ' +
'PRINT ''==> Granting MSSql 2005 and above SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON sys.database_permissions TO gdmmonitor ' +
'GRANT SELECT ON sys.all_objects TO gdmmonitor ' +
'GRANT SELECT ON sys.database_principals TO gdmmonitor ' +
'GRANT SELECT ON sys.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON sys.database_role_members TO gdmmonitor ' +
'END ' +
'/* Re-add the dropped members */ ' +
'IF EXISTS (SELECT 1 FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Re-adding the gdmmonitor role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Re-adding member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_addrolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/* drop the temporary table */ ' +
'DROP TABLE #rolemember ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT ''<<< END of role creation on: ' + @databaseName + ''' ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT '' ''' +
'PRINT '' '''
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
-- Adding user to all the databases
-- and grant gdmmonitor role, only if login exists.
PRINT '>>>==================================================================>>>'
PRINT '>>> Add and Grant gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '>>> on all databases.'
PRINT '>>>==================================================================>>>'
USE master
/* Check if @Guardium_user is a login exist, if not do nothing.*/
IF NOT EXISTS (select * from syslogins where name = @Guardium_user)
BEGIN
PRINT ''
PRINT '************************************************************************'
PRINT '*** ERROR: Could not find the login: ''' + @Guardium_user + ''''
PRINT '*** Please add the login and re-run this script.'
PRINT '************************************************************************'
PRINT ''
END
ELSE
BEGIN
DECLARE @counter AS smallint
set @counter = 0
-- This loop runs 4 time just to make sure that the @Guardium_user gets added to all db.
-- 99% of the time, this is totally unnecessary. But in some rare case on SQL 2005
-- the loop skips some databases when it tried to add the @Guardium_user.
-- After two to three executions, the user is added in all the dbs.
-- Might be a SQL Server bug.
WHILE @counter <= 3
BEGIN
set @counter = @counter + 1
set @databaseName = ''
set @executeString = ''
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases
where not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'/*Check if the login already has access to this database */ ' +
'IF EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'/*Check if login already have gdmmonitor role*/ ' +
'IF NOT EXISTS (SELECT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr WHERE usr.uid = mbr.memberuid ' +
'AND mbr.groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'AND usr.name = ''' + @Guardium_user + ''') ' +
'BEGIN ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END ' +
'END ' +
'IF NOT EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'PRINT ''==> Adding user [' + @Guardium_user + '] to database: ' + @databaseName + ''' ' +
'execute sp_adduser [' + @Guardium_user + '] ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END '
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
END -- end while
-- Required for Version 2005 or greater.
IF (@dbVer != '2000')
BEGIN
-- Grant system privileges to the @guardium_user. This is a requirement for >= SQL 2005
-- or else some system catalogs will filter our result from assessment test.
-- This will show up in sys.server_permissions view.
PRINT '==> Granting catalog privileges to: ''' + @Guardium_user + ''''
execute ('grant VIEW ANY DATABASE to [' + @Guardium_user + ']' )
execute ('grant VIEW ANY DEFINITION to [' + @Guardium_user + ']' )
END
PRINT '<<<==================================================================<<<'
PRINT '<<< Finished Adding and Granting gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '<<< on all databases.'
PRINT '<<<==================================================================<<<'
PRINT ''
END
GO

Thanks a lot Sir... it worked.
Can you also help me in troubleshooting below issue?
This script is working fine on all databases except one MS SQL 2005 database. build of this database is 9.00.3042.00
SA account with highest privileges is been used for script execution. errors received are as follow:
>>>==================================================================>>>
>>> Creating role: "gdmmonitor" at the server level.
>>>==================================================================>>>
==> Granting MSSSQL 2005 and above setupadmin server role
==> Starting MSSql 2005 role creation on database: master
(0 row(s) affected)
==> Dropping the gdmmonitor role members on: master
==> Creating the role gdmmonitor on: master
Msg 15002, Level 16, State 1, Procedure sp_addrole, Line 16
The procedure 'sys.sp_addrole' cannot be executed within a transaction.
==> Granting common SELECT privileges on: master
Msg 15151, Level 16, State 1, Line 117
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 118
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 119
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 120
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 121
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 122
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 123
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 124
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 125
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 126
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
==> Granting common EXECUTE privileges on: master
Msg 15151, Level 16, State 1, Line 130
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 131
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 132
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 133
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 134
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 135
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 136
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.

How to create Users/Roles for ldap in weblogic without using admin console

Is it possible to create Users/Roles for ldap in weblogic without using admin console? if possible what are the files i need to modify in DefaultDomain?
or is there any ant script for creating USers/Roles?
Regards,
Raghu.
Edited by: user9942600 on Jul 2, 2009 1:00 AM
Edited by: user9942600 on Jul 2, 2009 1:58 AM

Hi..
You can use wlst or jmx to perform all security config etc.. same as if it were perfomred from the admin console..
.e.g. wlst create user
..after connecting to admin server
serverConfig()
cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/AuthenticationProviders/DefaultAuthenticator")
cmo.createUser("userName","Password","UserDesc")
..for adding/configuring a role
cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/RoleMappers/XACMLRoleMapper")
cmo.createRole('','roleName', 'userName')
...see the mbean docs for all the different attributes, operations etc..
..Mark.

Create user role

I would like to know if is possible to create user role on the CodldFusion server.
Your help iand information is great appreciated,
Regards,
iccsi,

See http://forums.adobe.com/message/4907241#4907241

Create users , roles, link roles to users

Hi Experts,
how do we create users , roles and link roles to users in oracle discoverer?
If they are the users created in the oracle database, how is discoverer access given to them? EUL5_EUL_USERS has the list of the users and roles for discoverer.
thanks.

Hi User,
Below is the document link step by step process how to give access to end-users here is the topic Viewer and Plus Access with E-Business Suite
http://ascbi.com/thirdparty_documents.htm_
Hope it helps you.promptly award points here is the link http://forums.oracle.com/forums/ann.jspa?annID=939
By,
KK

9i export file into 11GR2 - import full db or create users, roles.. first?

I'm moving several 9iR2 databases onto new hardware with 11GR2 64bit.
One of them has only a couple of users, roles etc. so I pre-create all the tablespaces, users, etc. then import with 11G imp utility using fromuser=user1,user2 etc. in the parfile.
Another has an application front end that creates a database user for all the application users, and assigns certain roles etc. So I have dozens of users on this database, along with various roles as well. I'm wondering what the best way to approach this one is, so I'm thinking:
Do I do a import full=y, and let the import create all the users roles etc. ? *I already pre-created all the tablespaces when I created the empty database with DBCA
Do I generate the ddl for all the users and roles, run it on the new db first, then import with fromuser=user1,user2..?
Do I import full=y for trial run, then when ready to import final production data, drop users that have data with cascade option, recreate these users and import their schemas only?
Keep in mind that I am doing several "rehearsals" on this, importing from full exp files on the current production database, for users to test the app against and also to debug my import commands,scripts etc. so this will be a one command process when I am ready to do the final import.
I'm asking all of this because I'm wondering if its just ok to do full=y when upgrading, (I usually don't)
I'm assuming all the system etc. tables in the 11G are just left alone when ignore=y parameter is used.

I tried importing the full database from the 11G gui's import from export files option, but it kept failing, so I imported just the schema's I wanted. That worked ok, and all the database users accounts and roles were also imported, not sure how that happened or if it was when I attempted the full import. In any case I got the database schemas I wanted over, but noticed a lot of invalid views that would not compile, so a further check showed that none of the applications public synonyms came over. Running a simple create script on dba_synonyms on the prod database fixed that and its all good now, but I'm wondering why the synonyms never came across with the import?

Is it possible to create user-roles associations at run-time?

basically I need to be able to add a user to a role programmatically before the role-based content is displayed to the user.
Example: I have a role called 'Manager' created in the portal. When a user logs on, I detect that the user has the attribute 'job title' = 'Manager' so I add the user to the 'Manager' role and the portal shows the content for the 'Manager' role.

Hi Umesh,
Yes, we can add users to the Role programatically.We did that.
Just see the below code to get some idea...
IUserFactory userFactory = UMFactory.getUserFactory();
IRoleFactory roleFactory = UMFactory.getRoleFactory();
IRole role = roleFactory.getRole(roleName);
String userId = "";
//Here userIDS is the list of user-id s to assign.
for (Iterator i = userIDS.keySet().iterator(); i.hasNext();) {
userId = (String) i.next();
role.addUserMember(userId);
Hope this helps you.
Cheers....
Satya
[Pl reward points if this is helpful]

Programatically creating users, roles and insert them into Jazn xml

Hi All,
I am using ADF 11G and ADF BC to develop my application. Whenever a user is created an entry will go into OID and into DB. Admin will apply the roles and users for that roles through application. Once the administrator assigns the roles, the user need to see the appropriate menus based on the roles assigned.
If I use ADFSecurity, then I need to redeploy the application each and everytime an user is created and a role assigned to it. But I have to avoid the redeployment step. When ever admin assigns a role while approving the user, the same should be reflected in Jazn, so that I can use the securityContext to generate menus dynamcally.
Is there a way to do programatically the below:
1. Creating roles
2. Assigining Users
I want to use the functionality of ADFSecurity but programatically.
Any information/links/guidance is much appreciated.
Thanks,
Morgan.

Morgan,
You can configure WLS to use OID instead of jaxn.xml file.
[url http://download.oracle.com/docs/cd/E14571_01/core.1111/e10043/toc.htm]The security guide should be good reading for you.
Best,
John

How to create SR Queue and Custom User Role for technician only see which SR assigned Him/Her and Resolve

Hi
I have created workitem SR advance and Criteria with ID [Assigned To ME] and created user role in Advance operators.
But in technician Console showing which SR he/she created not service desk assigned to him/her.
Please suggest...
Regards
Sheetla Maurya

I have find out Solution .......Create Queue with Service Request Advance and we not need to create any criteria option, After that create custom User role on Advance
operators with View "Assigned To ME"
Regards
Sheetla Maurya

Create Limited user role on SCVMM 2012

Hi ,
Hi ,
I want to create user Role do the following actions only
Start / Stop VM
Delete VM
Create VM
Do you have any idea ?
Ramy

Hi Ramy,
Please try to post this question in forum below , you may get further assistance from SCVMM experts :
https://social.technet.microsoft.com/Forums/en-US/home?forum=virtualmachinemanager&filter=alltypes&sort=lastpostdesc
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How can I add a user Role member that is from a different domain

We are currently building out SCOM 2012 R2 to provide monitoring as a service to some of our customers. As of now we have the RMS on our own department's domain (Domain A) which we have full control of and we have a gateway server that is on the company
wide domain (Domain B) so that we can monitor other departments devices as the leverage this system.
Monitoring is working just fine on both domains and we are just working on fine tuning SCOM so that we can roll it out as a service we offer to our customers. One of the next steps we are working on before rolling it out is giving specific users access
to view only their own devices, dashboards, and groups. So I created a Read-Only profile and went to add a user to test it out, but that user is on Domain B and SCOM is unable to resolve this account. I'm seeing Event ID 26319 with Error Code 1332.
How can I get SCOM to discover devices on a different domain so that I can give them different permissions for accessing the Operations Console and/or Web Console? Is this possible?
Here is the Error I'm seeing.
Log Name: Operations Manager
Source: OpsMgr SDK Service
Date: 2/4/2015 1:11:59 PM
Event ID: 26319
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxx.xxxx.xxxxxxxx.xxx
Description:
An exception was thrown while processing UpsertUserRolesV2 for session ID uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="OpsMgr SDK Service" />
<EventID Qualifiers="49152">26319</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-04T21:11:59.000000000Z" />
<EventRecordID>172748</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>xxxxx.xxxx.xxxxxxxx.xxx</Computer>
<Security />
</System>
<EventData>
<Data>UpsertUserRolesV2</Data>
<Data>uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40</Data>
<Data>The creator of this fault did not specify a Reason.</Data>
<Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).</Data>
</EventData>
</Event>
Thanks for any help I can get in resolving this issue.
Jake

The SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake

T codes for user roles

hi
can any body help with T code to create user roles in solution Manager and IMP T codes relating to this
thanks
padma

Tcodes to create Roles in SAP is PFCG ...
it shd be the same in SOLMAN...
Sri

Which objects to add for user role

Hello guys.
Have SCOM 2012 R2
Need to create user role for CRM admins, so they can view and edit alerts for their servers.
I choose Advanced Operators, but i'm stucked at creating group scope.
Let's say i want this user role to create rules\override for all objects, which contains in my CRM server. What object type will i choose? Windows Computer? Or i need to add specifically all objects, connected to this server (but they are hundreds).

This is where you would want to use a group. Create a group called CRM Servers. Add the servers to this group using the computer object. Then you would scope to that Group, so they could only see those servers that are in that group. Because you selected
the Computer Object, you will see all classes that fall under the computer object that are associated with those servers.
See the best paper ever on this topic (written by Cameron Fuller MVP) at veeams web site. http://www.veeam.com/wp-manage-scom-using-groups.html
Consider learning how to create a dynamic populated group so you will not have to be constantly change group membership by hand.
hope this helps!
Scott Moss
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com

Assign user role to network group people

Hi everyone,
What user role should I assign to network people if they wan to be able to discovery(add) and manage their network devices by themselves. I have tried Advanced Operator and Operator two roles, but non of them came up with Discovery Wizard option. I really don't
want to assign them to Operations Manager Administrators group because I'm pretty sure they will mess up SCOM within couple mins!!!!!

Hi,
We can create runas account for discovery with the network discovery wizard, the runas account type is community string only.
Network devices that use SNMP v1 or v2 require a Run As account that specifies a community string, which acts like a password to provide read-only access to the device.
Regards, Yan Li
Hi Yan Li,
After reading your post couple times, I'm confused now. I did have two run as account created for community string and snmpv3 authentication. When I ran Discovery Wizard for network devices, I can select either one of them to run without problem,
and discover network devices. My account is under Operation Manager Administrators role, so I have full permissions to do anything I want.
My question is that how to configure or create User Roles for network group people, so they can also run Discovery Wizard and manage their network devices without putting them into Operation Manager Administrators group. Ex: there is not Administration
tab for them, they only see Network Monitoring folder under Monitoring. Because I don't want them to mess up those options under Administration.
Is it just like the previous post said that only two options? Thank you.
1) grant them as a SCOM administrators right
2) scom administrator help them to do network discovery

Need steps to create: Users, and then allocate authorization profiles.

Hello,
I have set up release procedures using a how to doc which was posted an sap123.com. It doesnt go through how to do this, only gives a screen shot. The SAP environment is a test environment for training. We have maybe 4 users existing in system. I would like to know how to first create a user, then go through PFCG and create and allocate authorization profiles. They need to be able to approve PR's/ PO's using the two release codes and release groups I have set up. The steps I followed are posted here: http://www.sap123.com/showthread.php?t=59.
Thanks for any help.

Thanks. I do have authorization to create users/ roles & such. I have created 3 specifically to test the workflow I am trying to set up that contains release procedures.
In PFCG - I created a new role MATMGT. On the Menu tab, Assign Transactions screen, could someone please tell me what the Transaction Code would be so that, when I goto the Authorizations tab and click on the Change Authorization Data button, I get a "Materials Management: Purchasing" row displayed in the Change Role: Authorizations screen. I am following http://www.sap123.com/showthread.php?t=59 - and am stuck at the "Create and allocate authorisation profiles" section, as there are no steps detailing the usage of PFCG.

GoldenGate replication of creating users, roles

Similar Messages

Maybe you are looking for