Good Gawd Can Someone Write A Mixer App For the Audigy2
What good is a soundcard without a decent **easily accessible** mixer app supporting ALL the inputs and outputs ...
And for cripes sakes when are you idiots going to learn **BASIC** audio procedures and NOT start the soundcard at full volume after an install? Do you turn your stereo at home up full blast and then turn on the power? Of course not .... There's nothing like "the Windows Sound" coming out full bore from my 400 Watt Klipsch setup at 2 in the morning ....
When you need software there are two places to go:
The Mac App Store which provides some user feedback, and
Macupdate which provides lots of feedback and also links to alternate similar software with ratings.
Peter
btw Mavis Beacon was originally a Mac application and is still for the Mac.
Similar Messages
-
I can't deregistar my kindle app for the iPad, it keeps telling me I am not connected to the internet when I am fully connected
iPad. It deleted all my books, but not the account info. It keeps saying the sync failed too.
-
Everything runs als Root, can someone give me a hand for the system rights?
yeah I screwed up big times because of this neat unknow_user "Feature" in Leopard.
First i installed a os 10.4 app under leopard which let the disk utility slow down and the finder crashes if i change the user rights, and then i changed globally the group and user of everything in the application folder and my documents folder with pathfinder for looking if i can solve the problem that way.
-But now everything runs as Root and even the hd itself has a owner root and as group admin.
i don't get the difference between system, root, admin, wheel, username for the owner and group. I googled but found nothing clear about this.
And i also wonder what i should do about the group and the meaning of root, system, admin, wheel, username as a group for a single user system. Where should i give a read, read&write and execute permission for example?
at the moment everything seems to run mostly root and every program runs on root and i think this is the worst think that can happen and causes some trouble for the programs.
Can someone give me a short hand and for example tell me if i should set the hd owner to my username and the group to system or admin or whatever and this also for the application and documents/film and other stuff on my user folder?
that would be great
I think i have to reinstall leopard, but as long as this unknow_user problem still resist and no patch is available, i see the same thing happen again and again for me, so a little help would be great
here the ls -l -a from the system and user directory
drwxrwxr-t 26 root admin 1496 Nov 1 23:41 .
drwxrwxr-t 26 root admin 1496 Nov 1 23:41 ..
-rw-rw-r--@ 1 root admin 15364 Nov 5 22:42 .DS_Store
drwxrwxr-x@ 3 root admin 102 Oct 30 18:40 .Spotlight-V100
drwxrwxr-x@ 2 root admin 68 Aug 2 12:29 .Trashes
-rw-r--r-- 1 root admin 0 Oct 30 17:09 .com.apple.timemachine.supported
drwx------ 2 root admin 952 Nov 5 22:09 .fseventsd
-rw-rw-r--@ 1 root admin 262144 Oct 10 11:42 .hotfiles.btree
drwxr-xr-x@ 2 root wheel 68 Aug 2 12:30 .vol
drwxrwxrwx+ 400 adrian admin 13872 Nov 5 22:00 Applications
drwxr-xr-x 2 root admin 102 Nov 1 23:01 Data
-rw-r--r--@ 1 root admin 10240 Oct 25 05:19 Desktop DB
-rw-r--r--@ 1 root admin 37442 Oct 25 01:39 Desktop DF
drwxrwxr-x@ 13 root admin 544 Oct 30 19:46 Developer
drwxr-xr-x 5 adrian adrian 204 Sep 12 14:25 InputManagers
-rw-r--r--@ 1 adrian adrian 1568128 Nov 1 23:45 Installer Log File
drwxrwxr-t+ 60 root admin 2108 Nov 1 22:06 Library
drwxr-xr-x@ 2 root wheel 68 Aug 2 10:08 Network
drwxr-xr-x 3 root wheel 136 Oct 30 18:01 System
drwxrwxrwx@ 3 root admin 102 Aug 2 17:21 TheVolumeSettingsFolder
drwxr-xr-x 5 root admin 238 Nov 2 00:03 Users
drwxrwxrwt@ 4 root admin 170 Nov 5 20:21 Volumes
-rw-r--r-- 1 adrian admin 0 Oct 29 22:51 az.log
drwxr-xr-x@ 2 root wheel 1360 Oct 30 17:57 bin
drwxrwxr-t@ 2 root admin 68 Jan 13 2006 cores
dr-xr-xr-x 2 root wheel 512 Nov 2 04:11 dev
lrwxr-xr-x@ 1 root admin 11 Oct 30 17:57 etc -> private/etc
dr-xr-xr-x 2 root wheel 1 Nov 2 04:11 home
lrwxr-xr-x 1 root 502 11 Nov 1 22:40 mach -> mach_kernel
-r--r--r--@ 1 root admin 615748 Oct 29 18:23 mach.sym
-rw-r--r--@ 1 root wheel 10243756 Oct 10 06:38 mach_kernel
-rw-r--r--@ 1 root wheel 10696809 Oct 10 06:38 mach_kernel.ctfsys
dr-xr-xr-x 3 root wheel 2 Nov 2 04:11 net
drwxr-xr-x@ 3 root admin 102 Sep 14 17:40 opt
drwxr-xr-x@ 6 root wheel 204 Oct 29 18:23 private
drwxr-xr-x@ 2 root wheel 2244 Oct 30 18:01 sbin
drwxr-xr-x 11 root admin 374 Jun 9 2006 sw
lrwxr-xr-x@ 1 root admin 11 Oct 30 17:57 tmp -> private/tmp
drwxr-xr-x@ 13 root wheel 510 Oct 30 19:52 usr
lrwxr-xr-x@ 1 root admin 11 Oct 30 17:57 var -> private/var
and for the my user folder:
drwxr-xr-x+ 22 adrian adrian 1156 Nov 3 02:30 .
drwxr-xr-x 5 root admin 238 Nov 2 00:03 ..
-rw-r--r-- 1 adrian adrian 3 Sep 13 22:41 .CFUserTextEncoding
-rw-r--r--@ 1 adrian adrian 15364 Nov 5 21:50 .DS_Store
-rw-r--r-- 1 adrian adrian 11 Oct 16 17:17 .PortAuthority2.4.rc
drwx------ 2 adrian adrian 68 Nov 5 20:58 .Trash
-rw-r--r-- 1 adrian adrian 0 Aug 16 04:37 .Xauthority
-rw-r--r-- 1 adrian adrian 2552 Nov 5 22:43 .bash_history
drwxr-xr-x 4 adrian adrian 136 Aug 17 21:11 .config
drwxr-xr-x 8 adrian adrian 306 Aug 6 02:22 .dvdcss
drwxr-xr-x 2 adrian adrian 578 Oct 21 19:32 .fontconfig
-rw-r--r-- 1 adrian adrian 489724 Aug 30 17:49 .fonts.cache-1
drwxr-xr-x 2 adrian adrian 68 Sep 14 17:40 .macports
-rw-r--r-- 1 adrian adrian 1643 Aug 30 19:01 .mime.types
-rw-r--r-- 1 adrian adrian 47 Oct 12 22:45 .parallels_settings
-rw-r--r-- 1 adrian adrian 194 Sep 28 02:52 .profile
drwxr-xr-x 3 adrian adrian 102 Sep 23 00:48 .stella
drwxr-xr-x 2 adrian adrian 68 Aug 16 20:09 .wapi
-rw-r--r-- 1 adrian adrian 467 Nov 5 04:21 .webaom
-rw-r--r-- 1 adrian adrian 570 Aug 16 04:37 .xinitrc
drwxr-xr-x 3 adrian adrian 170 Aug 5 08:10 Applications
drwxr-xr-x+ 23 adrian adrian 1190 Nov 5 20:21 Desktop
drwxrwxrwx+ 35 adrian adrian 2210 Nov 5 22:08 Documents
drwxr-xr-x+ 14 adrian adrian 3332 Nov 5 20:02 Downloads
drwxr-xr-x+ 48 adrian adrian 1836 Oct 30 19:11 Library
drwxr-xr-x+ 9 adrian adrian 748 Nov 2 23:49 Movies
drwxr-xr-x+ 8 adrian adrian 510 Sep 29 05:44 Music
drwxr-xr-x 2 root adrian 68 Nov 3 02:30 New Folder
drwxr-xr-x+ 6 adrian adrian 748 Oct 18 23:26 Pictures
drwxrwxrwx+ 3 adrian adrian 238 Nov 4 20:34 Public
drwxr-xr-x+ 3 adrian adrian 204 Aug 14 21:29 Sites
drwxr-xr-x 3 adrian adrian 340 Oct 31 05:55 CompilationUnix
-rw-r--r-- 1 adrian adrian 129 Oct 6 16:48 license.jailllaass wrote:
lizdance40, did you read the original post? The poster's problem is that when he connects the iPod to his computer the iPod does not appear in iTunes. He does not say he has a wifi problem with his iPod.
lizdance40 wrote:
You need to do an update on your router's firmware, or get a higher speed router..
Or replace the router and or modem. High demand can burn out a router in 2 years. Typical life is about 4-5 at most.
The new iPod is more advanced and if your router is slow or inconsistant signal your iPod will stop trying to connect to save your battery.
of course he dose have a wifi problwm. read the last line of the original post -
I've been receiving an error message, "That the .itl file is locked, on a locked disc or you do not have write permission". Can someone tell me how to unlock the file or disc?
theres no - in "itunes" its all one word
try right clicking and running itunes as adminstrator or try on a different user account -
I am creating apps. Can someone tell me where to send the idea to get money or learn how to code so I can code it myself??? Please?
This was a kickstarter project project - they released a version of this and are now working on version 2 - its designed to work with most cases
( i have no financial interest in the company - i just supported their kickstarter projects)
http://www.sarvidesigns.com/
you might contact them and see if version 1 is still available for purchase
http://www.sarvidesigns.com/#!contact/cyga -
Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount
THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??
-
Hello and good day,
can someone share me here in the Forum may, if they found a Adobe can put together package? Basically, I need only Photoshop and Adobe Premiere Pro! About a response I'd like Very much. Thank you very much and greetings
Ralf
PS. According to Adobe, this should determine a Adobe ID be possible!You may buy two individual subscriptions
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html -
Can someone just spell it out for me? Going from FCP HD to DVD SD :-(
Hey folks. I hate to come here and ask a gargantuan number of questions, but this has been driving me out of my mind. I've tried asking specific question in hopes of simply finding one little problem that will fix my woes, but now it has come to this:
Can someone just spell it out for me?
How do I get my DVD going? I'll fill you in with all the knowlege I think you need.
I shot with Sony's HDR-FX1 and edited in Final Cut. That means I'm working with High defintion. The movie is set and solid, and runs One hour and twenty mintues. I'm trying to get it, the commentary track, the subtitle track, and a slew of video files (also shot in high def) onto one dvd. This goes beyond the 4.8 gig limit. Hence, i have a Dual layer burner, and have been burning onto DVD-R DL disks.
I've tried downgrading to SD format through steps from this website:
http://www3.telus.net/bonsai/Step-by-Step.html
I do all the steps to all of my files, and then start putting them into my DVD STUDIO PRO project. I have a recorded commentary which I add in, and I have written all the subtitles. The disk is in SD mode, and everything fits onto the dual layer disk. I've tried literally a dozen different ways, and something keeps going wrong. Either the menus won't come up, and just the film will play upon inserting, or the subtitle stream doesn't pick up- problem after problem. So, now I ask: Can someone simply spell out to me what steps I need to take to get my HD film onto a Dual Layer SD disk?
I apologize for how general this question is and how many directions it can go, but I'm at a breaking point after four months of failures. Thank you very much.Hi man.
I don't really know which ways you've taken to put
the video into dvd studio, but since you're asking
for a step by step process, then here's what i do:
- export the entire hour out of FCP to a qt file
- take that QT file to compressor. the only audio you
really need is dolby 2.0. this would also reduce the
file size of video to make things fit in a single
layer dvd
I have always found that the 'Dolby 2.0' and '5.1' AC3 settings in Compressor badly affect your audio mix...it collapses the soundstage, takes away a lot of depth and imaging, and smudges the frequency range, so I usually output a 16-bit 48kHz, which holds things together much more nicely when working with a stereo mix. Problem is, for a feature-length films, the resulting output from compressor makes it too big to fit on standard DVD-R's with the M2V picture file. My workaround was to actually take take the original exported FCP QT movie (which has a 48kHz aiff soundtrack to begin with), and only lay the audio part of it in the track timeline in DVD studio pro, then lay the compressed M2V video on top of it. They're both still in sync, unless you picked different in/out points in Compressor. When you 'build' your Video/Audio TS in 'advanced burn' it somehow makes it small enough to all fit onto a DVD, while still maintaining the audio quality of the AIFF, instead of the crappy-sounding 2.0 AC3. Then you just use Toast to burn your disc. The difference in sound quality is night and day. So basically I do the picture in Compressor, but let DVD Studio Pro prepare the audio in the Advanced Burn stage.
It will be very difficult to get a good-sounding AC3 (what they call 'dolby' 2.0 or the wierd 5.1 encoding they use) unless you mix/master/encode your soundtrack professionally like regular studio films do. Just encoding it in compressor straight out of FCP or ProTools isn't enough. You lose too much. -
Someone else bought an app on the store on my new computer. I had already purchased the app before on my old computer, so I deleted the app on my new computer that the other person purchased. I now want to download the app again through MY account. When I click INSTALL it asks for ID, but it shows up automatically with the other person's ID, so I delete that and enter mine instead. I then click SIGN IN, but then it says "Unknown error", then I click OK, then it says "We could not complete your request. There was an error in the App Store. Please try again later. (4)". How do I get rid of all info of other people's IDs so I can get the app through my account again?
The app that I'm trying to download actually might have been a pirated app. But I deleted it, so why is it not letting me get it through my account?
Please help!
Thanksyou may delete this discussion. I fixed the issue
-
When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching. Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod touch too. Can I move these back?
weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
how weird is that?
oh well JG - maybe you mixed a magic potion for me?
anyway, thank you for all the help.
to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
cheers
P -
What would it take for someone to build an app for my business?
I am looking for someone to build an app for my business....
You can hire people to build your app for you, but it will cost you. Now how deep you will dig into your pockets will depend on the complexity of your app. Try a company called azurasoft but be cautious dont get suckered into anything
-
I have just updated to the iOS7 on my i-phone4. Can someone PLEASE help me to cancel the voicememos from recording. I cannot stop it and have a red "recording paused bar at the top of my screen.
Thanks for that. I just realised that that is the way you have to close down all of your open apps. The way I got out of the recording memo was to tap the top of the screen and then I could cancel the recording.
-
Why can't I install a app from the app store
Why can't I install a app from the app store
Olliegirl wrote:
Why can't I install a app from the app store
You really need to provide a little more information. Why don't you explain a little bit of what you have been experiencing, and maybe someone can offer some advice.
Are you signed into the correct Apple ID? Do the apps start downloading at all? Do you get the "waiting" or "Loading" icons at all?
What are you doing that isn't working? -
on my iphone i was trying to buy an app for the first time, it promt me for the password, but then it asked for the security question. I have for gotten what the answer was. need help resetting the question and saving the changes?
Chick3597 wrote:
Regardless of apple updating something or another. I have no need for the additional questions and really don't want to allow them to bully me into compliance.
You may have no need for additional but Apple does. They don't want your iTunes account to be hacked and then go complaining to them that their security procedures are not up to standards.
Chick3597 wrote:
So how can I continue in the good old fashioned way?
Its really absurd to even ask this in light of the information that you have been given already. The "old fashioned" way is gone. It's Apple's store, Apples's rules and IMO - its a wise decision on Apple's part.
You do not have to comply at all, but you will not be able to purchase from iTunes anymore, but nobody is going to force you to do something that you do not want to do. -
Why can't I update/ download apps from the app store after upgrading to iOS 7.0.3?
I have an iphone 5 and updated my phone to the lastest version (ios 7.0.3) last night. I can't download/ update any apps from the app store using my cellular network. The only error message is that the app cant be downloaded at this time. As soon as I click the download button, the image of the icon shows up with "Waiting" underneath the icon. I tried tapping on the app icon to pause the download but that isn't working. I have disabled Wi-Fi setting and enabled"the use cellular data" option in the itunes and app store setting page. Memory is not an issue because I have a lot of memory available. In the cellular setting page the App Store is enabled to use cellular data. It seems like it is a setting issue. What can be done to fix this problem
Thanks for your suggestion. Not long ago before I saw your response I tried to download the app and I seemed to have some progress (I had 5 bars and 1x). It looked it was 3/4 of the download complete only to have the same error message.
Since then I reset the phone and I have tried downloading the app when there 5 bars with 3g. Every time the icon has waiting underneath it and I get the same error message.
Maybe you are looking for
-
Missing Machines within MBAM Console
Our MBAM Console Enterprise Report is not showing all of the machines that we know to have the MBAM client installed on (about 1000 short). I have reviewed the SQL Jobs on the MBAM server and the job histories show success. How does a machine show up
-
App-V Software Policy Restrictions for IE
I am not sure if this is even possible, but in a particular package we are deploying for our company, one of the last steps is to create a desktop shortcut to Internet Explorer. We want it so when the user opens this specific IE icon, the "Connection
-
Person responsible inheritance
Hello Guys, I am just wondering is there any std way to have the person responsible name from maintenance plan to work order ? I don't see any field in maint plan to put the person name which will inherit to work order and also in the shop paper. I h
-
HT6031 I can't get additional lessons to install for guitar
The program, shows a progress bar, and looks like it downloading, but then gives me an error when complete, check internet connection. My interenet is fine, as that is how I got this to post! I deleted the garageband, and reinstalled, still does th
-
I tried atualize my Xperia Z1 with a computer but a problem happened: it isnt running on. What i do?