GR Date & Current Date
Hi
We are using WE03 for printing GR in that GOODS RECEIPT DATE & CURRENT DATE is there what is this current date, what is the difference between two.
Regards
rang
Hi,
You may take the print of GRN any time after posting the GRN. Hence, it shows the GRN date (date on which GRN was posted) & current date (date on which the print was taken).
Regards,
Prashant Kolhatkar
Pl. reward points if answer is helpful
Similar Messages
-
Default date (current date - 1) on prompt
Hi Everybody,
I have BI 11.1.1.6.1
I have a Prompt in which there is a calender
I need Defalut date to be set as (sysdate - 1).
I tried
Need default date (current date - 1) on prompt
and
How to create a prompt with default value as current_date?
But it doesn't work in BI 11
ThanksHi,
Refer the screen short
http://imgur.com/Xopmt
go to edit your dashboard prompt-->edit you date prompt column-->expand option -->set Default selection as SQL Results-->Enter a SQL statement to generate the list of values
SELECT case when 1=0 then "tablename"."columname" else timestampadd(sql_tsi_day, -1, current_date) end FROM "subject area name"
E.x:
SELECT case when 1=0 then "Time"."Calendar Date" else timestampadd(sql_tsi_day, -1, current_date) end FROM "Sample Sales Lite"
this will return current date - 1 date values.
Thanks
Deva -
Delimited Org Unit(having end date Current date) are not coming in Bex output.
HI All ,
I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
Please suggest .
Thanks,
Arvind VenaiHi Arvind,
As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
There mught be some restriction in BEx Query , please check -
Cancellation billing date = current date
Dear all,
I have a requirement that cancellation billing document date as current date. For example my billing document date is 15.03.09 and iam cancelling that billing on 31.03.09, so i require biiling date of cancellation document as 31.03.09.
Kindly provide me information, thanks in advance.
V S KumarHi,
Is there any possibility that system should determine automatically not by giving the billing date as a manual entry for cancellation billing document?
Thanks in advance
V S Kumar -
Prompt with Default date (Current Date)
Hi Experts,
I have WEBI Report With Calendar Date (0CALDAY) Object on a OLAP Universe (OLAP Universe built on SAP BW BEx Query).
I need to create a prompt on Calendar Date Object with default value as Current date (systemdate). I need to create this at universe level not at BEx level (No Exceptions).
Looking forward to hear from you.
-Thanks,
DeepuHi Ingo,
Thanks for your response.
>
Ingo Hilgefort wrote:
> this is because a EXIT VAriable doesn't have a DEFAULT value.
>
> Ingo
But EXIT Variable has a DEFAULT value in BEx Designer. DEFAULT Value (Current system Date) is populated when a BEx Query is Run. How come it is not properly reflected into BOBJ?. It retrieves the data for Current system Date in BOBJ too when WEBI Query is run but it does not show Current system Date in prompt screen.
I hope you understand my problem.
-Thanks,
DEEPU. -
How to achive current date in report
Hi Expeorts,
I have below Filter in one of report. how to achive this?
Ship Date = Current Date
What is the meaning of this? and how to do this?
Thanks in advance
David
Edited by: david Rathod on Jan 10, 2012 7:50 AMHi ,
You can achieve the same using Customer exit variable .You can use the following code .
FORM do_user_exit USING i_vnam LIKE rszglobv-vnam
i_vartyp LIKE rszglobv-vartyp
i_iobjnm LIKE rszglobv-iobjnm
i_s_cob_pro LIKE rsd_s_cob_pro
i_s_rkb1d LIKE rsr_s_rkb1d
i_periv TYPE rro01_s_rkb1f-periv
i_t_var_range TYPE rrs0_t_var_range
i_step TYPE i
CHANGING e_t_range TYPE rsr_t_rangesid.
if i_step = 1.
clear l_s_range.
l_s_range-low = sy-datum.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range TO e_t_range.
endif.
ENDFORM.
Hope it helps .
Thanks
Kamal -
Problem in getting current Date at runtime and parsing into my own format
Hi all,
In my program....I want to get the Date(current Date).......
How can I get it....
And also I want it to change it to my own format.....
I should get this at runtime....
Plz tell me which class and method to use....
Any help will be greatly appreciated...
Thanks,Try looking at some of these articles:
http://www.javaworld.com/javaworld/javaqa/2001-10/01-qa-1005-dateformat.html
http://www.javaworld.com/jw-12-2000/jw-1229-dates.html
http://www.javaworld.com/javaworld/jw-03-2001/jw-0330-time.html -
Adding in Current date via SQL insert
If i am doing a process to update each line in a table, and i want to put in the current date into a column, is there a global variable that i can use.
FOR i in 1..HTMLDB_APPLICATION.G_F01.COUNT LOOP
UPDATE GFMIS.AUTOBAHNDIRECTACCOUNTS SET recert = '1', RECERTBY = :APP_USER, RECERT_ACTION = 'keep' , DATE = 'current date' WHERE ACCID = HTMLDB_APPLICATION.G_F01(i);
END LOOP;
So DATE would hold something like 10/18/2005 14:45SYSDATE<br><BR>
FOR i in 1..HTMLDB_APPLICATION.G_F01.COUNT LOOP
UPDATE GFMIS.AUTOBAHNDIRECTACCOUNTS
SET recert = '1',
RECERTBY = :APP_USER,
RECERT_ACTION = 'keep' ,
DATE = SYSDATE
WHERE ACCID = HTMLDB_APPLICATION.G_F01(i);
END LOOP;<br>
chet -
How to display current date in query header?
Hi,
How to display current date in query header?
I use Query Designer for development.
Thanks,
Arun KKHi Arun,
You can define fixed header lines and footer lines so that when you generate the query list, they can receive current values of certain fields. When you define a header line or a footer line, you must specify a character string of the type &field, where field is the short name of a field.
This function allows you (for example) to place a sort criterion in the header line.
You can include the following fields as variables in the headers directly:
%NAME
Name of the user processing the query
%DATE
Current date
%TIME
Current time
%PAGE
Current page number (6 characters)
%P
Current page number (3 characters)
These fields can be used in the short forms N,D,T and P. If you want to use these letters as short names for query fields, the field values from the query are used.
You can also see the link
[http://help.sap.com/saphelp_nw70/helpdata/EN/6e/dd68721faf11d6b1d500508b6b8b11/frameset.htm]
Regards,
NR -
Billing date as Current date.
Hi All.
when user prepare billing documents on Sunday, the system by default pick billing date of Monday for orders prepared or changed on Sunday.This leaded to mismatch of actual dispatch qty and dispatches
Is it possible to keep billing date - current date as default data in transaction VF01.
Reg,
AmolAmol Tamhane wrote:>
> when user prepare billing documents on Sunday, the system by default pick billing date of Monday for orders prepared or changed on Sunday.This leaded to mismatch of actual dispatch qty and dispatches
> Is it possible to keep billing date - current date as default data in transaction VF01.
Hi Amol,
I think you may actually be wanting to change the "Selection Date" not the billing date.
The selection date is available by selecting Shhift+F7 from VF01.
You can then select documents which should be billed tomorrow/Monday.
Best regards,
Glynn -
How to fill a prompt in webi with current date?
A webi report is being generated on BEx Query.
IN BEx query variables are defined for some date fields to prefill them with current date.
Foe ex. there is license start date. For this field variable is defined so that in variable screen License start date is automatically filled with greater than or equal to current date(which is system date). WHich is a mandatory variable.
On BO side, a webi report is being developed on a Universe (based on this BEx query).
When the webi report is run, the license start date(mandatory variable in BEx) is automatically prompted, but date is not getting prefiiled with current date.
How to prefill this prompt with current date?
the prompt should be like
LIcense start date >= <current date>Hi,
Yes, it isn't possible to reference anything like 'Current Date' in the universe (like you would with a SQL data source).
The solution I have seen recently goes like this, I don't know the exact details (so I might have some terminology wrong), but someone with ABAP skills should get what I mean.
Assuming you want to filter on 0CALDAY.
In ABAP, create a customer EXIT that calculates the current date as a number (so today might be 40651). Do the same for 0CALDAY.
In the BEx create a formula variable that references each of those, then a Formula Key Figure (I forget the exact name of them) that's just the current day number minus the 0CALDAY number. This gives you the 'age' of that row of data.
Your Webi report can then have a built in filter (or prompt with a default value) of, say Age <= 30. The report can be scheduled and will always run with the last 30 day's data.
We actually did the customer exists to show the 'age' in months.
Sorry I can't explain it any better, but it's working great for us.
Hope that helps. -
Not getting current date in InputDate Field while setting MinValue..
I drag and drop an Input Date field in jspx page..For setting the MinValue as current date,i bind the MinValue to a variable declared in backingbean..When i want to select current date ,*Current date is diasbled*..But the message is showing that "*Enter a date on or after 6/29/2009*"..*How i select current date* (6/29/2009)..
code in jspx page
===========
*<af:inputDate label="Release Date" id="ipdtDate"*
*binding="#{backing_RelPlan.ipdtDate}"*
*minValue="#{backing_RelPlan.today}"/>*
+backing bean contains+
=======
*Date today=new Date();*
*public void setToday(Date today) {*
*this.today = today;*
*public Date getToday() {*
*return today;*
*}*Hi Briston,
you must somehow set time to 00:00 or cut it. this works for me:
package brano.test1.view;
import java.text.SimpleDateFormat;
import java.util.Date;
public class MyBB {
private Date today;
public MyBB() {
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
try {
String stringToday = sdf.format(new Date());
today = sdf.parse(stringToday);
System.out.println(stringToday);
} catch (Exception e) {
public void setToday(Date today) {
this.today = today;
public Date getToday() {
return today;
}regards,
Branislav -
Historic and Current data for Master data bearing objects
Hi All,
We are trying to implement type 2 dimensions for all the master data bearing characteristics, where we require historic and current data available for reporting. the master data can have a number of attributes and all of them can be time dependent. We are not getting any 'datefrom' or 'dateto' from the source system.
For example:
For Example: The table below shows data entering BI at different dates.
Source Data day of entering BI
MasterID ATTR1 ATTR2
123506 Y REWAR day1
123506 N REWAR day4
123506 Y ADJUST day4
123506 N ADJUST dayn
The field 'day of entry into BI' is only for your understanding; we do not get any date fields from the source. SID is the field we are generating for uniqueness. It is a counter. EFF_DATE would be the current date for all the data. EXP_DATE would be 31.12.9999 until the attributes change. SID and MasterID together would be the key.
On day 1 the following data enters BI,
day 1
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 12/31/9999
On day 4, 2 data records enter with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
2 123506 N REWAR 2/13/2009 12/31/9999
3 123506 Y ADJUST 2/13/2009 12/31/9999
the EXP_DATE of the record of day 1 needs to be changed to current date.
Also there are two records entering, so latest record would have EXP_DATE as 31.12.9999. And the EXP_DATE of the first record on day 4 should change to the current date.
so the following changes should happen,
CHANGE
SID MasterIDATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 2/13/2009
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
On day n, one data record enters with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
4 123506 N ADJUST 2/22/2009 12/31/9999
The change is ,
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
The data expected in P-table is as below, on Day n or after Day n, untill any other record enters for this MasterID,
1 123506 Y REWAR 2/10/2009 2/13/2009
2 123506 N REWAR 2/13/2009 2/13/2009
3 123506 Y ADJUST 2/13/2009 2/22/2009
4 123506 N ADJUST 2/22/2009 12/31/9999
Has anyone worked on type 2 dimensions earlier? Or any ideas to implement this logic would be appreciated.
Regards,
SudeeptiCompound the Master ID with eff date and other attribute as superior objects
so you will get P-table as
ATTR1 ATTR2 MAT ID
1 2/10/2009 2/13/2009 123506 Y REWAR
2 2/13/2009 2/13/2009 123506 N REWAR
3 2/13/2009 2/22/2009 123506 Y ADJUST
4 2/22/2009 12/31/9999 123506 N ADJUST -
How to show current date in a column of dimension table in ssas
Hi,
I have 2 dimension tables (ALLWORK and YOURWORK) and 1 measure table (STATS). In ALLWORK dim table, I have 4 columns, one of them is END_DATE. Based on END_DATE and current date I want to create a named calculation field. To achieve this, I
want to show the current date in 5th column (of ALLWORK dim table) as calculated member (as named calculation wont show me correct date).
Problem is, I am not able to create the column in the dimension table. While creating the calculated member, I am not able to select the ALLWORK dimension table, it always selects MEASURE by default. Please help.
thanks
Tarique
thanks and regards Tarique AslamHi Tarique,
According to your description, you want to add a column to your dimension to show the current date, right?
In data source view, we can add named calculation to your table. A named calculation is a SQL expression represented as a calculated column. This expression appears and behaves as a column in the table. A named calculation lets you extend the relational
schema of existing tables or views in a data source view without modifying the tables or views in the underlying data source.
Reference
http://msdn.microsoft.com/en-in/library/ms174859.aspx
http://devmau5.wordpress.com/2010/03/25/the-getdate-of-mdx/
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
TechNet Community Support -
How to Get Current Date from MS Access in a Select Statement
From a java method, I want to use JDBC to get the current date from MS Access. In Oracle I would do "select sysdate from dual", but I can't figure out how to do it in MS Access. Here are some of my attempts. I have a table in my Access db called PARM.
// String sql = "SELECT '0', NOW() FROM PARM";
//rs.next() is false
// String sql = "SELECT NOW() AS CURR_DT FROM PARM";
//rs.next() is false
// String sql = "SELECT DATE() AS CURR_DT FROM PARM";
//rs.next() is false
// String sql = "SELECT NOW()";
//StringIndexOutOfBoundsException: String index out of range: -1
// String sql = "select { fn now() } from parm";
String sql = "SELECT Date()";
//java.lang.StringIndexOutOfBoundsException: String index out of range: -1
ResultSet rs = stmt.executeQuery(sql);
if (rs.next()) {
return rs.getString(1);
} else {
return null;
}Why are you getting it as a String? You should be getting it as a timestamp.
Although getString works for me too. There is something else wrong that you haven't shown.
Here is some shoddy, but simple, test code that demonstrates it working.
import java.sql.*;
public class Test{
public static void main(String args[])throws Exception{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection c = DriverManager.getConnection("jdbc:odbc:stats");
Statement s = c.createStatement();
ResultSet rs = s.executeQuery("SELECT NOW()");
while(rs.next()){
System.out.println(rs.getTimestamp(1));
rs.close();
s.close();
c.close();
}
Maybe you are looking for
-
We installed WebLogic Portal. We were able to bring up the webpage while we were configured on port 80. As soon as we wired the portal for port 443, it would not display page. Error: Invalid at the top level of the document. Error processing res
-
I have a discolored strip the right side of my mac book screen
I HAVE A DISCOLORED STRIP ON THE RIGHT Side OF MY MAC BOOK SCREEN
-
Some times my animation is not load
Hi I Created A new loop animtion recently, All objects in it are created with shapes and I did'nt use any png/Gif. I'll glad to know your views about it. http://www.amaspad.com/ My problem is some times the animation is not load when I refresh the br
-
Same class name, different packages
Let's say I have two classes called Team, and each are in their own package. I go to import a.Team and b.Team, what do I have to do to make this work?
-
I/O Error ioe: Output buffer too small
I am currently running an FTP process from within the database using a Java stored procedure attempting to send about 199 rows. I am receiving the error message i/o error ioe: Output buffer too small. If I reduce the number of rows to below 83, I can