Graphic of IGS in Self Services (ESS & MSS) does not appear

hi
I successfully implemented the following note 704604
http://img688.imageshack.us/img688/3376/igsurl.jpg (steps for implementation this note)
the message is "SAP IGS is running" in url http://myserver:4<b>04</b>80 (<b>04</b> is instance)
But 2 days ago it looks as if it had been misconfigured
I appeared before the chart date and employees(the current day marked), but now It get a table with dates.
Although I have seen on the MSS on the "Team Calendar"
http://img691.imageshack.us/img691/7937/igsmss1.jpg (top iview)
http://img263.imageshack.us/img263/5290/igsmss2.jpg (bottom iview)
I hope helps and posts, thanks
Ivan

Hi
I would suggest to restart the IGS or even server , normally  restart fixes issues with IGS with my experience.
Also Check the note 514841  .
Regards,
Nibu Antony

Similar Messages

  • Sometimes ESS menu does not appear

    Hi,
       Sometimes when the user logs into the ESS the ESS menu does not appear
    . This happens only sometimes and when we restart the ITS and ask the  
    user to log in again the menu appears.
    I looked at the access log of the ITS and found the following entry there : access with invalid random key.
    Any suggestions will be very helpful.
    Below are the technical details  :                                                              
       ESS is being launched through the ESS menu 'PZM3'.                   
       ITS 620 patch level 16, HR 470 patch level 45, Basis patch level 54.
    Hi, I know that it is a weird problem but any brain storming suggestion would be helpful.
    Message was edited by: kapil sharma

    Hi Kapil,
    - check access log of ITS if the request was received
    - check if other flowlogic services like i.e. systeminfo work
    - check with a HTTP sniffer what was send to the server/client
    - check the output of view source in browser
    - make sure that no network device (proxy,loadbalancer...)  leads to the random failure
    - check trace files of ITS
    Just some ideas.
    Regards,
    Klaus

  • Service entry sheet does not appear in PO history

    hello all
    here is a difficult question:
    standard PO (type NB) with one Item line.
    we did several GR on this PO, several entry sheets.
    The last SES, with "final entry", does not appear in the PO history.
    the GR corresponding to it, does appear.
    any idea of what could have happened?
    thanks
    Alisa

    HI,
    whenever we do the SES against the PO,
    two entries trigger in PO history,
    one is SES and other is material document type withmvt 101,
    ur saying that material document is there in ur case and SES is not there,
    after posting the SES entries will update at EKBE ,ESSR and ESLL,
    there is a way to track the SES by by comparing the tables EKBE and ESLL ( service line objects ),
    u can trace through package no of services,
    if the pocket no is 101 at EKBE, immediate pocket no is 102 at update at ESLL,
    check the pockets in both tables,
    may be this will cause through patch level,
    ask the BASIS team about this.
    lakshmi reddy
    Edited by: lakshmi reddy on Apr 27, 2010 5:13 PM

  • Self Service Portal Intermittently does not show all my requests in the "My Requests" section

    I have some customers reporting that they are missing requests in the "My Requests" section of the self service portal intermittently, i.e when they log in one time they will only see a couple of work-items, other times they will see all of them. 
    Has any one seen this?  Any suggestions on how to troubleshoot?  I have taken a look at the silverlight logs and there seems to be no logged errors.

    It sounds like "the bug".
    Next time it happens, try this:
    -- Step 1 Clean the execution plan cache
    dbcc freeproccache
    -- Step 2 Reproduce the problem and run the following query
    SELECT * FROM sys.dm_exec_query_stats AS qs
    CROSS APPLY sys.dm_exec_sql_text(sql_handle)
    CROSS APPLY sys.dm_exec_text_query_plan(qs.plan_handle, qs.statement_start_offset, qs.statement_end_offset) AS qp
    WHERE text LIKE N'%Composite_Select_Path_180f5706-3d05-4bbc-ca2d-c33624fdb3c8%';
    GO
    -- Step 3 Modify SQL Query and execute it
    EXECUTE sp_create_plan_guide_from_handle
        @name =  N'Guide1',
        @plan_handle = 0x06000500EEBEEF2940016668010000000000000000000000,
    -- please replace this value with the plan handle discovered in step 2
        @statement_start_offset = 966;
    -- please replace this value with the start_offset discovered in step 2
    -- Step 4 To see current plan guides
    select * from sys.plan_guides
                    -- Step 5 (only if Rollback is needed)
    EXEC sp_control_plan_guide N'DROP', N'Guide1';
    GO
    Edit: this is done against the ServiceManager db

  • Service Desk message does not appear in DSWP

    Hi,
    I'm currently configuring Service Desk in SolMan 4.0. I noticed that the service desk messages are created successfully from the satellite systems as they generate a message number that appears in CRM_DNO_MONITOR of the Solution Manager system. However, when I check in tcode DSWP --> Operations --> Service Desk, no message appears in the list. I have only used SLFN message type but nothing appears even if I filter the seach for it.
    Can anyone help me solve this?
    Thanks,
    Regina

    Hi,
    I have seen them now in SAP_SLFN_STAND. It has been working after all.
    Thanks anyway!

  • How do I add an app to my location services when it does not come up automatically, How do I add an app to my location services when it does not come up automatically

    How do I add an app to location services when it does not appear automatically

    Have you tried Settings>Privacy>Location Services and see if you can turn it on in there?
    Obviously it has to be an app that works with location services so if it is and nothing else works, delete the app and download it again to make it ask again if you want to allow your location to be used with it.

  • Integrating Manager Self-Services(MSS), Employee Self-Services(ESS) in EP60

    Hi,
    I would like to integrate Manager Self-Services(MSS) and Employee Self-Services(ESS) into my Enterprise Portal EP6.0 SP2.
    I have downloaded the business packages for the same and looking for a good document which can guide me to implement the integration.
    Any quick response would be highly appreciated.

    Hi,
    the "connection" between iView and R3 System is done via the system definition. The ESS - iViews use a System alias SAP_R3_Human_Resources (and the other names I mentioned above).
    If you have assigned this ESS role to a user the iView connects to the R3 system defined in the alias. If you chose single sign on the user id from the portal should be the same as in the R3. If it is different the easiest way would be to use usermapping.
    The best way would be to assign this ESS role to your user and watch what is happening.
    Regards,
    Holger.

  • Payslip does not appear on the Self Service Page

    Hi all ,
    I would like the system to display the Payslip of an employee on his self-service page so that when the user logs in he or she can view his/her Payslip.
    When i click on the Function Payslip it says ERROR on Page.
    I have Run International HRMS Global.And as the organisation is in Africa it doesn't have any specific localisation.
    So can anyone assist me on how can i customize the JSP page so that the Payslip appears on the Self-Service page of an employee.
    Thanking you in advance,
    Chetan

    ypu have posted the same query in HRMS, few people have responded to that thread
    Payslip does not appear on the Self Service Page

  • BSP iview HAP_CALIBRATION Graphic does not appear

    Hi there,
    I'm using HAP_CALIBRATION BSP application, search.htm page. When trying to show the graphic, it does not appear.
    I have configured IGS connections at SM59. I´ve already checked note 898918 and I have this correction installed.
    What can I do more? Can you send me some documentation? I haven't find nothing special.
    Thanks and best regards,
    Vasco Brandã

    Solved.
    It is necessary to create IGS_RFC_DEST_MBO RFC connection.
    Best regards,
    Vasco Brandã

  • ESS tab does not show up after deploying ESS

    We did every configuration step for ESS and we had no issue before for other projects.
    However this time ESS tab does not show up on EP even the roles are assigned.
    ALL Jco tested OK.
    What could be wrong?
    Thanks for your help.

    Jose:
    Thanks!
    I think I miss
    BP_ERP5ESS
    BP_ERP5MSS
    Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
    Could you tell me what version of
    BP_ERP5ESS
    BP_ERP5MSS
    should be applied to the EP7.01?
    Follow up:
    Jose: I do see the BP at the same Wiki:
    BP ERP05 ESS 1.41 SP04
    BP ERP05 MSS 1.41 SP04
    BP ERP05 COMMON PARTS 1.41 SP04
    I am going to apply them on the portal. Do you agree? Thanks again.
    Thanks!

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • HT4995 My location service on Google does not work and nothing is getting saved in my history bookmark

    My location service on Google does not work. It will not bring up my location. Also nothing is getting saved in my history folder in my bookmark.

    I have the same issue, I think. If I open Safari and search Walmart (google is my default search) it doesn't give me location results, and there is a little button at the top that says 'Use Precise Location.' If I tap that button nothing happens. Very frustrating. I've checked all my settings against my wife's iPhone, and my iPad, both of which work, and I can't find anything different.

  • I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

    I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now.  HELP!!!

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • America's top number one wireless service...does not work in Puerto Rico

    Please come back to Puerto Rico. I have been a member for over ten years. I live in Ohio  and will have to relocate to Puerto Rico.  My daughter is enrolled in college to become a school teacher in Puerto Rico. My family plan is not working well in Puerto Rico. I am paying for a family plan, (here in Ohio) and my daughter has two phones in Puerto Rico. They are not working. I had called Verizon Support, and was told that the phones must be mailed back to (Ohio)  me here in the states to be reactivated. Verizon phones cannot be activated in Puerto Rico. I prefer only Verizon, which is why I have not switched to any other provider. But, because Verizon does not have towers or businesses in Puerto Rico, even though we have 4G phones, we now have no service in Puerto Rico.   I am stuck with the choices of AT&T, T-Mobile, or Straight Talk from Wal-Mart, or the WORSE are the wireless and Internet services of Puerto Rico, Claro.. Claro has outages for DAYS and still expect full payment, regardless of how many days lost for service. Claro does not credit your account even if you had an outage for a week; you are still billed for the full month.  It is difficult to avoid this company in Puerto Rico. This is a message to CEO of Verizon...please bring your business back to Puerto Rico. When people asked my daughter what service she uses, they were excited when she said that she uses Verizon. But were disappointed when she said that her account is back in (Ohio) the states, there are no stores here. I have to send (AGAIN) two new phones activated here in the states back to Puerto Rico, so that my daughter can still use our Verizon Family Plan. There is nothing Verizon Support can do.  Once I move to Puerto Rico, there will be no one to send our phones to in (Ohio) the states to reactivate for our Verizon Family Plan. The phone service works for about three or four months, (in Ohio) than there is no service at all. Please bring America's top number wireless service back to Puerto Rico. Or Make some kind of deal with the wireless tower owners in Puerto Rico, so people that even visit Puerto Rico can use your phone service. Thank you for reading my request

    Our home line has had no dial tone for two days now.  When a repair was requested, we received a commitment of 8/8.  That timing was not sufficient.  I updated the repair request on line indicating that we needed the repair by today.  I called this morning and a recording told me that Verizon was committed to repair the phone by 8pm tonight.  Well, 9:30pm and no Verizon.  I tried calling with my cell phone and sat on the phone for over 30 minutes.  Either no one was home or it was past business hours.  In any event, here we sit with no home phone service.  We are elderly.  My husband has a heart condition.  I am grateful for our cell phones, not Verizon.  What if we had a real emergency and didn't have cell phones?  This is not customer service.  We never even received a phone call or an email as we requested on the repair status.  So sit another day or maybe more.  Frustrated in NJ.  P.S. Our experience with My Verizon is it sends you round and round and round with no real solution to your problem.  Any suggestions? Thanks.

  • Category for service category S046 does not exist

    Dear Experts,
    This is regarding the Bdoc error "Category for service category S046 does not exist". ECC service materials are trying to replicate from ECC to CRM. In our scenario we doesn't required ECC service material in CRM. I have not downloaded service materials relevant data. Still i am facing the above error.
    Please help to fix the above error.
    Regards
    Ashwini

    Hi,
    Thanks for your reply. I have maintained the filter on service_master  object is not working.
    I have not downloaded the service material from ECC to CRM.Then what could be the reason for the above bdoc error.
    Please help me.
    Regards
    Ashwini

Maybe you are looking for