Grid Control 10gR2 and Data guard for repository HA
Hi,
We have a set up of two instances of OMS running on two seperate servers. I was suggested Dataguard as a failsafe high availability solution. It was to run two seperate OMSs using one single repository database, which has hot standby managed by dataguard.
But, I guess, I am confused that, if my repository fail, there will be no OMS to perform failover in Dataguard GUI.
Am I missing any point? How has others setup their repository? Any help is appreciated ...
Check this out with a mounted database
[lo***p02].oracle:/home/oracle > sqlplus dbsnmp
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jun 4 15:52:11 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0It cannot connect.
And then
[lo****p02].oracle:/home/oracle > sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jun 4 15:57:49 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
Similar Messages
-
Grid control agent and data guard in mount mode
Hello,
I would like to know how you manage your data guards when you do not have the license for active data guard with the grid control agents. The standby database is in mount mode, so the agents cannot query the database.
What do you guys do in such cases? Remove the agent? Or wait till a switchover?Check this out with a mounted database
[lo***p02].oracle:/home/oracle > sqlplus dbsnmp
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jun 4 15:52:11 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0It cannot connect.
And then
[lo****p02].oracle:/home/oracle > sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jun 4 15:57:49 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED -
Can Grid Control 10gR2 create a standby database when primary db uses ASM?
Does anyone know if Grid Control 10gR2 will be able to create a standby database when the primary database uses ASM for data files, redo log files, and archive log files but the standby database will use mounted disks? If it can, would it matter that the primary db will be a RAC cluster and the standby will be a single instance db?
I appreciate your reply and hope you are correct. Have you had a look at the 10gR2 Grid Control to confirm this or are you only going on published statements? The reason I ask is because previous versions of Grid Control claimed to support ASM but they would only allow you to work with them AFTER you had created a standby database manually but you couldn't actually use Grid Control to create a standby database from a primary database that had its log files on ASM disks.
-
Export job on EM Grid Control 10gR2
As far as I understand Export job on EM Grid Control 10gR2 can be created only on Database Maintenance page. Also Create Like is not supported for this job type, it cannot be edited and cannot be in Job Library. Thus, its definition is not in Grid Control repository.
I think dealing with Export job is not much user friendly on EM Grid Control 10gR2. Am I right?
Thank you.Thank you for interesting for my question.
Every time I want to create Export job I can create it through wizard. After that I cannot use neither Create Like feature nor edit this job. I have to use wizard to create another job from scratch.
When I use RMAN scripts job I can notice much better features.
In addition, I do not know whether the job definition exists in Grid Control repository. -
Comparision between Multimaster replication and data guard
Hi,
I have some questions regarding Multimaster Replication and Data Guard. Like
*1.)* I have a web site having database in oracle 10.2.0 and multimaster replication configured on it. But whenever i need to change the structure of the tables i
need to stop replication. So my web site is unavailable but my first priority is availability. So will it be useful for me to configure data guard.
*2.)* I have configured data guard for testing . My Database is Named as Gard and physical standby database is like stan.
it is working fine.
suppose my main database server get corrupted i have no option to start main database server. Now i left with only standby server how i can start standby server
as database main server.
*3.)* Is there any if main database stop working Standby database start working as main without dba intervention.
Thanks
Umesh
Edited by: Umesh Sharma on Jan 14, 2009 4:17 AMHi Umesh,
first of all you should be aware that Dataguard and Replication are two completely different things.
While the database where you replicate to is always up and open in read write mode, a physical standby can either be recovering or open in read only mode.
1.) I think from what you are telling you probably should consider using dataguard with a logical standby database, but be aware that there will be some limitations regarding datatypes.
2.) you can do a failover or a switchover, depending on your database version switchback may not be possible
3.) have a look at dataguard broker, you can use it to automate the failover
Best regards,
PP -
Recommendation for setting up Data Guard for EBS R12 12.1.3
Hello Experts,
I would like to get some experts opinion and recommendation on setting up Data GUARD for EBS R12.1.3 running on Linux based systems.
Firstly I would wanna let you all know that I am just geek in this subject matter so do excuse me for any mistakes.
While we are planning on setting up Data Gurad fro R12 what are the best practices to consider ?.
We have 2 node rac enabled database and would wanna have non-rac based physical standby, based on this I believe that having db tier on remote or standby site is enough ?
if db node is enough for standby location what are things to be done when a fail over / switch over / role transitioned to standby for the app node from primary site to point db on the
standby location or do we have to have both apps and db tier @ stand by location
--However having a apps tier/node at standby will be of no use as we are planing to run db on mounstate meaning not a active data guard setup.
Please do reply with your recommendation/suggestions/pointers
Thanks in Advance.Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. http://ec2-107-22-78-224.compute-1.amazonaws.com:8000/webservices/SOAProvider/EbizAuth?Generate=1132&soa_ticket=Tu2z7GYoWPwq-VdgimKRFg..' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details
Can you find any details about the error in the log?
I have looked at the following Note as well:
Error using the Generate WSDL Button in Oracle E-Business Suite Integrated Soa Gateway Release 12.1.1 [ID 1090946.1]Did the doc help?
Any one know what may be causing this issue? Do we have to do additional setup for SOA gateway after the standard install of the OVM? I tried to follow the steps in the note above but I do not see any entry for "<jdbc_url oa_var="s_apps_jdbc_connect_descriptor"/>" in the file data-sources.xml.
Anyone have any ideas?Have you reviewed these docs?
Oracle E-Business Suite Integrated SOA Gateway Troubleshooting Guide, Release 12 [ID 726414.1]
Oracle E-Business Suite Integrated SOA Gateway 12.1.1 Consolidated One-Off [ID 815196.1]
Thanks,
Hussein -
Hi there,
I'm trying to figure out how to determine and how to differentiate between control plane and data plane especially in troubleshooting MPLS VPN. Any keyword that distinguish between them? It seems to be confusing for a newbie here :)
Thanks in advance.
maherHi Maher,
The control plane is simply the set of processes that are responsible for disseminating information on routes, labels etc within a network. This includes routing protocols whose job is to communicate information on routes between different routers. The information provided by these protocols is then used to building routing/forwarding tables.
The data plane is simply an abstraction used to describe the actual flow of data packets using paths determined by the control plane. The control plane traffic carries control traffic (which is not end-user data) whereas the data plane traffic is actual end-user data.
There is no single command that you can use to distinguish between the two. The commands you have on a router that can be used to view control plane operation are as such:
sh ip route
sh ip cef
sh ip bgp ...
sh ip ospf ...
sh mpls forwarding-table...
etc... and many, many more
Typically, there isn't a clear demarcation between commands that display control plane info and those that display data plane information... You could use commands such as the following to get some idea of data traffic flowing through a router:
sh interfaces
sh policy-map interface
etc.
Hope that helps - pls rate the post if it does.
Paresh -
How to setup Data guard for SAP database?
Can someone please tell me how to setup data guard for SAP databases?
Thanks,
AbhiHi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay -
OMS error during install Grid control 10gR2 on Windows 2003
He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanksThere are some guidelines here:
Subject: OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
Doc ID: Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
Doc ID: Note:358640.1
~ Madrid. -
Difference between Manual Standby and Data Guard Broker..
hi,
could any let me know any usefull docs which help to understand the difference between manual dr and data guard broker?
thanks,>
could any let me know any usefull docs which help to understand the difference between manual dr and data guard broker?
>
Without Data Guard Broker:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17022/toc.htm
With Data Guard Broker:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17023/toc.htm
See especially why you want to use the broker:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17023/concepts.htm#i1013106
In short: You should have a good reason if you do not use the broker, because it is the officially recommended way to maintain Data Guard. It is even required for some features like Fast-Start Failover.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com -
Creation of a generic extractor and data source for the FAGLFLEXA table
Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, VishalHi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu -
How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use
Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward -
Question about voice and data plan for Europe
I am in New York and my boss is going to France for a week and a half. He told me he will not have access to the internet there. He asked me to find out if it would be possible to get a voice and data plan for the month that he will be there, and if so, could someone show me where I could look at the different plans available?
If it's not possible to do that for just a month, then could someone tell me where I could find the rates are for voice and data in France?
ThanksHi kevindrosario,
I appreciate your interest in our International Services. France, is a GSM country and will only support a Global capable device. Unfortunately, its not clear if your boss has a Global capable device. If so, here are the details for the voice and data rates for France.
If your boss doesn't not have a Global capable device, no worries! We offer an Occasional Global Traveler program, in which we will loan you a Global device for up to 21 days. I hope this information is helpful. Please let me know if you have any any additional questions or concerns.
Thank you, -
How to avoid the Amount and Date values for VOID Cheques
Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
YathishHi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian -
Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or nothing
LBraidwood wrote:
Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or nothing
Yes, that's why I recommend one have more than TimeMachine as a backup because if certain files or folders are corrupted on the TM drive, your not logging into your migrated user account or not be able to transfer it what so ever.
Then it's a REAL PAIN and costs $99 to bit read the TM drive to get the files out, then it's mess to go through and sort all the empty placeholders from the real files as TM doesn't save duplicates in each state, just uses the previous state's copy if there are no changes.
If you create the same named user account on the new machine, and simply transfer files via a USB thumb drive and place say music contents into the Music folder, then it will work too.
Look into making clones of your boot drive, the benefit here is it's bootable, you can access the drive directly to pick and choose files, run the computer just like before etc.
Most commonly used backup methods explained
Maybe you are looking for
-
Hi Apple Support Communities, I need some support. After loading Mavericks with lots of happiness primarily to be able to use dictation, see my previous query. Since then I have also had this come up on my Macbook Air everytime I start it. To open "C
-
SOAPAction HTTP header case sensitive
Hi gurus, I am trying to consume a webmethods java webservice via XI/PI NW2004 and when I send a request, PI send the soapaction field in uppercase. POST http://webservices.kuehne-nagel.com/HelloWorld_test HTTP/1.0 Accept: / Host: https://webservices
-
Reposinst Fails With Java Error on OWB 10.2.0.4
When Warehouse Builder repository creation (reposinst.sh) goes up to 21% (build repository owner) and dies with : Before processing SPAWN Token *... I am in processSPAWN ...* wholeLine =../unix/jvm.sh -classpath ../../../lib/transx.zip:../../../lib/x
-
Hi, we're trying to integrate UCM with BPEL. I've added the component BpelIntegration_10gR3_20071213.zip to the content server without any problem. My doubt is how to configure the connection to BPEL. We are using Weblogic and all the documentation t
-
After installing iTunes 11.1.1 using OS X Mountain Lion, I do not have iRadio (or I cannot find it) in iTunes. Would anyone know a solution? Thanks!