Grids on top of a drawing?

Hi everyone,
I have a bit of a problem, I am new to Adobe Illustrator, but i have worked with Photoshop for ages. I want to try making little characters and logos in Ai, that i have drawn in hand.
I'm beginning to understand the program, but i don't know how to get the grids on top of a drawing, so I'm sure that the logo/character is symmetric, can someone tell me how?
I hope someone can help me out!
Anders

Great succes! Thank you, that was just what i needed!

Similar Messages

  • Aligning elements to grid on top left corner

    Hi everyone,
    I often use the snap to grid which is nice to organize stuff.
    However, I was wondering is it possible to align the elements
    specifically to the top left corner of the grid, or top right corner etc..
    Ted.

    No.. that isn't what I meant.. what I meant is when you have snap to grid activated (It's hard to show it here but suppose that my table is a grid with equal sized squares) . I have an irregular text object A.. that aligns automatically to the top left of the grid squares.. I want it in the bottom right corner.
    A
    I later found out that it doesn't do it with text object.. but if I convert the text to outlines.. I can then align it to the bottom right corner of the grid squares.
    Ted

  • Add a simple setting to Intensity Graph that draws grid on top of data

    It would be extremely useful to break up the Intensity Graph data into cells to easily see "coordinates".  At the moment you have to follow coordinates with your finger or a pen.
    I was given this solution but it is surely an overkill for what should be a simple setting.
    http://forums.ni.com/t5/Measurement-Studio-for-NET/WPF-Intensity-Graph-gridlines-not-visible-on-plotted-data/td-p/3168193
     

    Siddhesh,
    You could define buttons / controls ... called 'next comp code' and 'prev comp code', and then in the events for these controls you could re-populate the alv data table with the data for each company code each time a button is pressed. 
    Hope this helps ...
    Duane

  • Need help making slanted grid

    Hi! I'm looking to make a landscape image similar to the one below by first making the grid and then filling it in with the paint bucket. Note I DO NOT WANT PERSPECTIVE, so the perspective grid tool isn't helpful. I've tried messing around with the rectangular grid and mesh tools but I'm very new to Illustrator and can't get what I want. Any help is appreciated, thanks!
    I'm using Adobe Illustrator CS6 by the way.

    Note I DO NOT WANT PERSPECTIVE
    Yes you do. What you've shown is perspective. It's just parallel perspective instead of converging perspective.
    You don't really need grids for such things, but if they make you feel comfortable, you might consider Serif DrawPlus. It costs less than $100, can draw to user-defined scale, and has a context-sensitive axonometric grid feature that's right up your alley.
    It neatly works around the usual problems associated with most grid attempts by displaying only the plane you are currently working on, and interactively switching to another plane when you select an object on that plane. Example:
    1. Set the current plane to what the program calls the Top Plane. The top plane grid displays. The shape drawing tools automatically conform to that grid:
    2. Set the current plane to what the program calls the Front Plane.The left plane grid displays, and the shape drawing tools automatically conform to it.
    3. Set the curent plane to what the program calls the Right Plane. The right plane grid displays, and the shape drawing tools automatically conform to it.
    Now here's the neat part.
    4. You want to draw the next surface that's parallel to the Top Plane. You just click an object already drawn on that plane and it switches you to that grid. Of course, by clicking that object, you've also changed the current stroke and fill to the colors of those of that object, so you're automatically all set to draw the top of the next terrace with whatever shape tool you have in hand.
    5. Similarly click a shape already on the left plane and the current color, grid and auto-conforming behavior of the shape tools switch to that orientation.
    6. Click a shape already on the right plane and the color, grid, and shape behavior switch to that plane.
    And so on. Note that the bounding boxes of the shapes conform to the current plane. So dragging the middle side handles stretches the shapes as you would expect, parallel to the grid lines of the plane the object is on. And it's not just the rectangles, but all the other pre-defined shape tools auto-conform, too. So you get accustomed to it in a few minutes and can proceed quite quickly.
    So it's sort of like the FreeHand / Illustrator perspective grid, except it does parallel perspective.
    JET

  • Points not obeying grid-snapping, or any snapping-rules where merged.

    This is my situation.
    1. Draw a line... It snaps to grid perfectly.
    2. Draw another line... It snaps to grid perfectly.
    3. Merge line1 with line 2 at one end... (It seems snapped to grid, but shows a "+" protruding connection so I zoom, and it is fine close-up...
    4. Move the point to a new grid-snap point to see if it draws better zoomed-out 100% without showing overlapping on this single point... However, now it snaps everywhere except onto the grid. Like all around the point, just not on the point. Now it will no longer snap to any grid-point or other point, always being "off". (This does not resolve by adding a new point and breaking the line. The whole line now refuses to snap to any actual point. It is always offset by an unsteady ammount/percent. Sometimes it is real close, sometimes it is about 50% between all snap-points.)
    Resolution = None... Never move points once set, and naver intersect a third line to a point, and never intersect one line with another.
    Results... everything looks misaligned, slightly off-angle, can not make any true aligned items, unless I use line-thickness 3, to hide the off-angles from misaligned points.

    This is what is happening, at a programming level...
    Once a point is "merged/union", at the intersection. That point it is now located, becomes an offset to the actual "Grid". However, (for some reason only on intersected lines), the offset interferes with snapping. It will SNAP, at your grid-distance, at a slight offset, never on the actual intersection. It starts to "snap", as if the grid is offset, staying on the lines, but invisible lines that are not the grid.
    The only resolution to get the line to go back to the grid, is to use the arrow-keys to bump it the 5.0-0.1 pixels it is off. (In my case with a 10px grid.)
    However, moving the point again, causes it to start snapping to the phantom-invisible grid-lines, and it will have to be nudged with the arrow-keys to push it back to an actual grid location.
    Also, however... This does nothing to resolve the zoomed-out view which shows top-left intersections displaying as a "+" when they are truly intersected. Also noticing that the lower-right lines alwys seem "open", not connected. (Drawing a standard rectangle with a line-width of 1px shows the "open" bottom corner.)
    Somewhere in code, there is an issue with drawing. Zoomed-out it is drawing "top-left" of pixel-locations, but zoomed-in, it is drawing from the "center" of the pixels. Thus, this akward offset, which is always top-left offset, and causing what seems to be "holes" on the bottom-right of intersections.
    (Might be a direct-x thing, becuse MS draws/calculates from top-left. GL draws from center. Most software draws bottom-right. Due to copyrighted "formulas" for drawing.)
    I suspect antialias may also be interfering with the drawings, as it completely messes-up curved-rectangles, making them look bowed-out not curved on the corners. Again, someone is using a GL formula for a MS translation, or software-formula for MS translation, not using the off-set adjustment to match the middle-draw to the top-left draw code.

  • Custom Control Help: Draw a line and output start and end points

    I'm looking to find or make a custom control (or simple subVI) that will appear as a 100x100 unit grid and allow me to draw a line from one point to another on that grid. It will then output the (x,y) of the starting and end point of that line on the grid.  Any help or ideas?
    Thanks,
    Steve
    LabVIEW 2009 SP1
    Solved!
    Go to Solution.

    What you basically want is a loop with an event structure where you process Mouse Down, Move and Up events for your controls. There are any number of ways of implementing something like this, but this one will probably be the simplest:
    Use a multicolumn listbox or a table for your grid. Hide the scrollbars and headers.
    You can use the ActiveCell property with -2,-2 to select all cells. You can then use the cell size property to set the exact size of the cell.
    Next, you put a picture control on top of the table and color its background transparent so that the table shows through. You use property node to make sure the two are aligned to exactly the same spot and size.
    You use the mouse events on the picture control to detect the clicks and moves.
    You use the table's Point to Row Column method to translate the event's position data to a cell.
    You use the picture control VIs to draw the line on the picture based on that data.
    You can even color the selected cells in the table using the table properties.
    If you want to simplify things somewhat, you can also use the timeout event instead of the Mouse Move event to draw the line, but then you'll need to keep the timeout value in a shift register and reset it to -1 (no timeout) when the Mouse Up event happens.
    I would also suggest processing Mouse Enter and Leave events to change the cursor and cancel if the user leaves in the middle of dragging.
    Try to take over the world!

  • Changing customer number in alv top of page for every new customer

    hi experts,
    in alv grid display top-of- page, how to change customer number  customer name for every new customer.
    please help me.
    Regards
    Naveen.

    You may look into this blog
    http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
    This is has been contributed by one of the SCN contributor Naimesh Patel.
    a®

  • Listbox in alv grid output -Possible?

    Can List box or drop down box can be placed in ALV Grid(Using FM) Ouput for a field .
    please clarify

    Check thse two examples.
    BCALV_EDIT_06
    BCALV_EDIT_07
    check the steps..
    Re: Dopdown Listbox in ALV Grid OO Concept
    and also Check this code.
    also check the below threads...
    List Box in ALV Grid
    In ALV  list box
    Dropdown list  in ALV
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    REPORT  ZTEST1234_ALV_TOP    MESSAGE-ID ZZ                           .
    DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_VALID TYPE C,
          V_FLAG,
          V_DATA_CHANGE,
          V_ROW TYPE LVC_S_ROW,
          V_COLUMN TYPE LVC_S_COL,
          V_ROW_NUM TYPE LVC_S_ROID.
    DATA: IT_ROW_NO TYPE LVC_T_ROID,
          X_ROW_NO TYPE LVC_S_ROID.
    DATA:BEGIN OF  ITAB OCCURS 0,
         VBELN LIKE LIKP-VBELN,
         POSNR LIKE LIPS-POSNR,
         CELLCOLOR TYPE LVC_T_SCOL, "required for color
         DROP(10),
         END OF ITAB.
    "The Below Definitions Must.....
    DATA:
    * Reference to document
           DG_DYNDOC_ID       TYPE REF TO CL_DD_DOCUMENT,
    * Reference to split container
           DG_SPLITTER          TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
    * Reference to grid container
           DG_PARENT_GRID     TYPE REF TO CL_GUI_CONTAINER,
    * Reference to html container
           DG_HTML_CNTRL        TYPE REF TO CL_GUI_HTML_VIEWER,
    * Reference to html container
           DG_PARENT_HTML     TYPE REF TO CL_GUI_CONTAINER.
    "up to here
    *       CLASS lcl_event_handler DEFINITION
    CLASS LCL_EVENT_HANDLER DEFINITION .
      PUBLIC SECTION .
        METHODS:
    **Hot spot Handler
        HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                          IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
    **Double Click Handler
        HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                                         IMPORTING E_ROW E_COLUMN ES_ROW_NO,
        TOP_OF_PAGE FOR EVENT TOP_OF_PAGE              "event handler
                             OF CL_GUI_ALV_GRID
                             IMPORTING E_DYNDOC_ID.
    *        END_OF_LIST FOR EVENT end_of_list              "event handler
    *                         OF CL_GUI_ALV_GRID
    *                         IMPORTING E_DYNDOC_ID.
    ENDCLASS.                    "lcl_event_handler DEFINITION
    *       CLASS lcl_event_handler IMPLEMENTATION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    *Handle Hotspot Click
      METHOD HANDLE_HOTSPOT_CLICK .
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW_ID.
        V_COLUMN = E_COLUMN_ID.
        V_ROW_NUM = ES_ROW_NO.
    *    MESSAGE I000 WITH V_ROW 'clicked'.
        CLEAR IT_ROW_NO[].
        X_ROW_NO-ROW_ID = V_ROW.
        APPEND X_ROW_NO TO IT_ROW_NO .
        CALL METHOD G_GRID->SET_SELECTED_ROWS
          EXPORTING
            IT_ROW_NO = IT_ROW_NO.
      ENDMETHOD.                    "lcl_event_handler
    *Handle Double Click
      METHOD  HANDLE_DOUBLE_CLICK.
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW.
        V_COLUMN = E_COLUMN.
        V_ROW_NUM = ES_ROW_NO.
        IF E_COLUMN = 'VBELN'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
        ENDIF.
        IF E_COLUMN = 'POSNR'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN."
        ENDIF.
      ENDMETHOD.                    "handle_double_click
    *  METHOD END_OF_LIST.                   "implementation
    ** Top-of-page event
    *    PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
    *  ENDMETHOD.                            "top_of_page
        METHOD TOP_OF_PAGE.                   "implementation
    * Top-of-page event
        PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
      ENDMETHOD.                            "top_of_page
    ENDCLASS.                    "LCL_EVENT_HANDLER IMPLEMENTATION
    *&             Global Definitions
    DATA:      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
                G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
    DATA: OK_CODE LIKE SY-UCOMM,
          SAVE_OK LIKE SY-UCOMM,
          G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
          GS_LAYOUT TYPE LVC_S_LAYO.
    data: v_lines type i.
    data: v_line(3) type c.
    *- Fieldcatalog for First and second Report
    DATA: IT_FIELDCAT  TYPE  LVC_T_FCAT,
          X_FIELDCAT TYPE LVC_S_FCAT,
          LS_VARI  TYPE DISVARIANT.
    *                START-OF_SELECTION
    START-OF-SELECTION.
      SELECT VBELN
             POSNR
             FROM LIPS
             UP TO 20 ROWS
             INTO CORRESPONDING FIELDS OF TABLE ITAB.
    describe table itab lines v_lines.
    END-OF-SELECTION.
      IF NOT ITAB[] IS INITIAL.
        CALL SCREEN 100.
      ELSE.
        MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
      ENDIF.
    *&      Form  CREATE_AND_INIT_ALV
    *       text
    FORM CREATE_AND_INIT_ALV .
      DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
      "attention.....from here
      "split your container here...into two parts
      "create the container
      CREATE OBJECT G_CUSTOM_CONTAINER
               EXPORTING CONTAINER_NAME = G_CONTAINER1.
      "this is for top of page
    * Create TOP-Document
      CREATE OBJECT DG_DYNDOC_ID
                       EXPORTING STYLE = 'ALV_GRID'.
    * Create Splitter for custom_container
      CREATE OBJECT DG_SPLITTER
                 EXPORTING PARENT  = G_CUSTOM_CONTAINER
                           ROWS    = 2
                           COLUMNS = 1.
    * Split the custom_container to two containers and move the reference
    * to receiving containers g_parent_html and g_parent_grid
      "i am allocating the space for grid and top of page
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 1
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_HTML.
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 2
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_GRID.
    *  CALL METHOD DG_SPLITTER->GET_CONTAINER
    *    EXPORTING
    *      ROW       = 2
    *      COLUMN    = 1
    *    RECEIVING
    *      CONTAINER = DG_PARENT_HTML.
    *  CALL METHOD DG_SPLITTER->GET_CONTAINER
    *    EXPORTING
    *      ROW       = 1
    *      COLUMN    = 1
    *    RECEIVING
    *      CONTAINER = DG_PARENT_GRID.
      "you can set the height of it
    * Set height for g_parent_html
      CALL METHOD DG_SPLITTER->SET_ROW_HEIGHT
        EXPORTING
          ID     = 1
          HEIGHT = 5.
      "from here as usual..you need to specify parent as splitter part
      "which we alloted for grid
      CREATE OBJECT G_GRID
             EXPORTING I_PARENT = DG_PARENT_GRID.
    * Set a titlebar for the grid control
      CLEAR GS_LAYOUT.
      GS_LAYOUT-GRID_TITLE = TEXT-003.
      GS_LAYOUT-ZEBRA = SPACE.
      GS_LAYOUT-CWIDTH_OPT = 'X'.
      GS_LAYOUT-NO_ROWMARK = 'X'.
      GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
      CALL METHOD G_GRID->REGISTER_EDIT_EVENT
        EXPORTING
          I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
      CREATE OBJECT G_HANDLER.
      SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
      SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
    *  SET HANDLER G_HANDLER->END_OF_LIST FOR G_GRID.
      SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
      DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
      DATA: L_INDEX TYPE SY-TABIX.
      "Here i am changing the color of line 1,5,10...
      "so you can change the color of font conditionally
      LOOP AT ITAB.
        L_INDEX = SY-TABIX.
        IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
          LS_CELLCOLOR-FNAME = 'VBELN'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
          LS_CELLCOLOR-FNAME = 'POSNR'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
        ENDIF.
      ENDLOOP.
    * setting focus for created grid control
      CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
        EXPORTING
          CONTROL = G_GRID.
    * Build fieldcat and set editable for date and reason code
    * edit enabled. Assign a handle for the dropdown listbox.
      PERFORM BUILD_FIELDCAT.
      PERFORM  SET_DRDN_TABLE.
    * Optionally restrict generic functions to 'change only'.
    *   (The user shall not be able to add new lines).
      PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
    **Vaiant to save the layout
      LS_VARI-REPORT      = SY-REPID.
      LS_VARI-HANDLE      = SPACE.
      LS_VARI-LOG_GROUP   = SPACE.
      LS_VARI-USERNAME    = SPACE.
      LS_VARI-VARIANT     = SPACE.
      LS_VARI-TEXT        = SPACE.
      LS_VARI-DEPENDVARS  = SPACE.
    **Calling the Method for ALV output
      CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
          IS_VARIANT           = LS_VARI
          IS_LAYOUT            = GS_LAYOUT
          I_SAVE               = 'A'
        CHANGING
          IT_FIELDCATALOG      = IT_FIELDCAT
          IT_OUTTAB            = ITAB[].
      "do these..{
    * Initializing document
      CALL METHOD DG_DYNDOC_ID->INITIALIZE_DOCUMENT.
    * Processing events
      CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
        EXPORTING
          I_EVENT_NAME = 'TOP_OF_PAGE'
          I_DYNDOC_ID  = DG_DYNDOC_ID.
      "end }
    * Set editable cells to ready for input initially
      CALL METHOD G_GRID->SET_READY_FOR_INPUT
        EXPORTING
          I_READY_FOR_INPUT = 1.
    ENDFORM.                               "CREATE_AND_INIT_ALV
    *&      Form  EXCLUDE_TB_FUNCTIONS
    *       text
    *      -->PT_EXCLUDE text
    FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
    * Only allow to change data not to create new entries (exclude
    * generic functions).
      DATA LS_EXCLUDE TYPE UI_FUNC.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
    ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
    *&      Form  build_fieldcat
    *       Fieldcatalog
    FORM BUILD_FIELDCAT .
      DATA: L_POS TYPE I.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
      X_FIELDCAT-FIELDNAME = 'VBELN'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-NO_ZERO    = 'X'.
      X_FIELDCAT-OUTPUTLEN = '10'.
      X_FIELDCAT-HOTSPOT = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Item'(025).
      X_FIELDCAT-FIELDNAME = 'POSNR'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
      X_FIELDCAT-FIELDNAME = 'DROP'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      X_FIELDCAT-EDIT = 'X'.
      X_FIELDCAT-DRDN_HNDL = '1'.
      X_FIELDCAT-DRDN_ALIAS = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
    ENDFORM.                    " build_fieldcat
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'MAIN100'.
      SET TITLEBAR 'MAIN100'.
      IF G_CUSTOM_CONTAINER IS INITIAL.
    **Initializing the grid and calling the fm to Display the O/P
        PERFORM CREATE_AND_INIT_ALV.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE USER_COMMAND_0100 INPUT.
      CASE SY-UCOMM.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  SET_DRDN_TABLE
    *       text
    FORM SET_DRDN_TABLE.
      DATA:LT_DRAL TYPE LVC_T_DRAL,
            LS_DRAL TYPE LVC_S_DRAL.
      LOOP AT ITAB .
    * First listbox (handle '1').
        IF SY-INDEX = 1.
          LS_DRAL-HANDLE = '1'.
          LS_DRAL-VALUE =  ' '.
          LS_DRAL-INT_VALUE =  ' '.
        ELSE.
          LS_DRAL-HANDLE = '1'.
          LS_DRAL-VALUE =  ITAB-POSNR.
          LS_DRAL-INT_VALUE =  ITAB-POSNR.
        ENDIF.
        APPEND LS_DRAL TO LT_DRAL.
      ENDLOOP.
    **Setting the Drop down table for Reason Code
      CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
        EXPORTING
          IT_DROP_DOWN_ALIAS = LT_DRAL.
    ENDFORM.                               " set_drdn_table
    *&      Form  EVENT_TOP_OF_PAGE
    *       text
    *      -->DG_DYNDOC_ID  text
    FORM EVENT_TOP_OF_PAGE USING   DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
      "this is more clear.....check it
      "first add text, then pass it to comentry write fm
      DATA : DL_TEXT(255) TYPE C.  "Text
    * Populating header to top-of-page
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
          TEXT      = 'Test Report'
          SAP_STYLE = CL_DD_AREA=>HEADING.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move program ID
      CONCATENATE 'Program Name :' SY-REPID
             INTO DL_TEXT SEPARATED BY SPACE.
    * Add Program Name to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move User ID
      CONCATENATE 'User ID :' SY-UNAME INTO DL_TEXT SEPARATED BY SPACE
    * Add User ID to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move count (no of records).
      move v_lines to v_line.
      CONCATENATE 'No of records :' v_line INTO DL_TEXT SEPARATED BY SPACE.
    * Add Client to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move date
      WRITE SY-DATUM TO DL_TEXT.
      CONCATENATE 'Date :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    * Add Date to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move time
      WRITE SY-UZEIT TO DL_TEXT.
      CONCATENATE 'Time :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    * Add Time to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    * Populating data to html control
      PERFORM HTML.
    ENDFORM.                    " EVENT_TOP_OF_PAGE
    *&      Form  ADD_TEXT
    *       To add Text
    FORM ADD_TEXT USING P_TEXT TYPE SDYDO_TEXT_ELEMENT.
    * Adding text
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
          TEXT         = P_TEXT
          SAP_EMPHASIS = CL_DD_AREA=>HEADING.
    ENDFORM.                    " ADD_TEXT
    *&      Form  HTML
    *       text
    FORM HTML.
      DATA : DL_LENGTH  TYPE I,                           " Length
             DL_BACKGROUND_ID TYPE SDYDO_KEY VALUE SPACE. " Background_id
    * Creating html control
      IF DG_HTML_CNTRL IS INITIAL.
        CREATE OBJECT DG_HTML_CNTRL
             EXPORTING
                  PARENT    = DG_PARENT_HTML.
      ENDIF.
    * Reuse_alv_grid_commentary_set
      CALL FUNCTION 'REUSE_ALV_GRID_COMMENTARY_SET'
        EXPORTING
          DOCUMENT = DG_DYNDOC_ID
          BOTTOM   = SPACE
        IMPORTING
          LENGTH   = DL_LENGTH.
    * Get TOP->HTML_TABLE ready
      CALL METHOD DG_DYNDOC_ID->MERGE_DOCUMENT.
    * Set wallpaper
      CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
        EXPORTING
          PICTURE_ID = DL_BACKGROUND_ID.
    * Connect TOP document to HTML-Control
      DG_DYNDOC_ID->HTML_CONTROL = DG_HTML_CNTRL.
    * Display TOP document
      CALL METHOD DG_DYNDOC_ID->DISPLAY_DOCUMENT
        EXPORTING
          REUSE_CONTROL      = 'X'
          PARENT             = DG_PARENT_HTML
        EXCEPTIONS
          HTML_DISPLAY_ERROR = 1.
      IF SY-SUBRC NE 0.
        MESSAGE I999 WITH 'Error in displaying top-of-page'(036).
      ENDIF.
    ENDFORM.                    " HTML

  • Desired text in top of page in ALV

    Hi All,
    Due to some technaical requirement user want to convert sapscript form into ALV GRID report.
    Can we show some text in right justified mode, some in left justified mode, some in center, some in bold character, etc.
    in top of page in ALV.
    Edited by: Lalit Singh on Nov 3, 2009 6:08 AM

    Hi,
        You can use the Following Code Sample For using the Top of Page in your Report For ALV
    *&      Form  TOP-OF-PAGE
          Header To ALV GRID
    FORM top-of-page.
      DATA: it_header TYPE slis_t_listheader,
            wa_header TYPE slis_listheader.
    *-Title
      wa_header-typ = 'H'.
      wa_header-info = text-004.
      APPEND wa_header TO it_header.
      CLEAR wa_header.
    *-Date
      wa_header-typ = 'S'.
      wa_header-key = text-005.
      CONCATENATE sy-datum+6(2) '.'
                  sy-datum+4(2) '.'
                  sy-datum(4) INTO wa_header-info.
      APPEND wa_header TO it_header.
      CLEAR wa_header.
      wa_header-typ = 'S'.
      wa_header-key = text-006.
      CONCATENATE sy-uzeit(2) ':'
                  sy-uzeit+2(2) ':'
                  sy-uzeit+4(2) INTO wa_header-info. "todays date
      APPEND wa_header TO it_header.
      CLEAR: wa_header.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = it_header.
    ENDFORM.                    "TOP-OF-PAGE
    wih this ALV Function Module
    *-Grid Display
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program     = sy-repid
            i_callback_top_of_page = 'TOP-OF-PAGE'
            i_structure_name       = 'WA_FC_FINAL'
            i_grid_title           = text-003
            is_layout              = wa_layout
            it_fieldcat            = it_fieldcat
            i_default              = 'X'
            i_save                 = c_a
            is_variant             = it_variant
          TABLES
            t_outtab               = it_fc_final
          EXCEPTIONS
            program_error          = 1
            OTHERS                 = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.                              " IF sy-subrc <> 0.
    Regards,
    Richa Tripathi.

  • Top Of Page in OO ALV

    I want define a header like Top Of Page proprty of Reuse ALV in my OO ALV. But I can give only grid title. Can I define a logo and a few subheader in my OO ALV? (Set_Table_For_First_Display)
    Thanks

    Hi Mehmet,
    i did one sample code, just check it, i documented all required things.
    REPORT  ZTEST1234_ALV_TOP    MESSAGE-ID ZZ                           .
    DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_VALID TYPE C,
          V_FLAG,
          V_DATA_CHANGE,
          V_ROW TYPE LVC_S_ROW,
          V_COLUMN TYPE LVC_S_COL,
          V_ROW_NUM TYPE LVC_S_ROID.
    DATA: IT_ROW_NO TYPE LVC_T_ROID,
          X_ROW_NO TYPE LVC_S_ROID.
    DATA:BEGIN OF  ITAB OCCURS 0,
         VBELN LIKE LIKP-VBELN,
         POSNR LIKE LIPS-POSNR,
         CELLCOLOR TYPE LVC_T_SCOL, "required for color
         DROP(10),
         END OF ITAB.
    "The Below Definitions Must.....
    DATA:
    * Reference to document
           DG_DYNDOC_ID       TYPE REF TO CL_DD_DOCUMENT,
    * Reference to split container
           DG_SPLITTER          TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
    * Reference to grid container
           DG_PARENT_GRID     TYPE REF TO CL_GUI_CONTAINER,
    * Reference to html container
           DG_HTML_CNTRL        TYPE REF TO CL_GUI_HTML_VIEWER,
    * Reference to html container
           DG_PARENT_HTML     TYPE REF TO CL_GUI_CONTAINER.
    "up to here
    *       CLASS lcl_event_handler DEFINITION
    CLASS LCL_EVENT_HANDLER DEFINITION .
      PUBLIC SECTION .
        METHODS:
    **Hot spot Handler
        HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                          IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
    **Double Click Handler
        HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                                         IMPORTING E_ROW E_COLUMN ES_ROW_NO,
        TOP_OF_PAGE FOR EVENT TOP_OF_PAGE              "event handler
                             OF CL_GUI_ALV_GRID
                             IMPORTING E_DYNDOC_ID.
    *        END_OF_LIST FOR EVENT end_of_list              "event handler
    *                         OF CL_GUI_ALV_GRID
    *                         IMPORTING E_DYNDOC_ID.
    ENDCLASS.                    "lcl_event_handler DEFINITION
    *       CLASS lcl_event_handler IMPLEMENTATION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    *Handle Hotspot Click
      METHOD HANDLE_HOTSPOT_CLICK .
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW_ID.
        V_COLUMN = E_COLUMN_ID.
        V_ROW_NUM = ES_ROW_NO.
    *    MESSAGE I000 WITH V_ROW 'clicked'.
        CLEAR IT_ROW_NO[].
        X_ROW_NO-ROW_ID = V_ROW.
        APPEND X_ROW_NO TO IT_ROW_NO .
        CALL METHOD G_GRID->SET_SELECTED_ROWS
          EXPORTING
            IT_ROW_NO = IT_ROW_NO.
      ENDMETHOD.                    "lcl_event_handler
    *Handle Double Click
      METHOD  HANDLE_DOUBLE_CLICK.
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW.
        V_COLUMN = E_COLUMN.
        V_ROW_NUM = ES_ROW_NO.
        IF E_COLUMN = 'VBELN'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
        ENDIF.
        IF E_COLUMN = 'POSNR'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN."
        ENDIF.
      ENDMETHOD.                    "handle_double_click
    *  METHOD END_OF_LIST.                   "implementation
    ** Top-of-page event
    *    PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
    *  ENDMETHOD.                            "top_of_page
        METHOD TOP_OF_PAGE.                   "implementation
    * Top-of-page event
        PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
      ENDMETHOD.                            "top_of_page
    ENDCLASS.                    "LCL_EVENT_HANDLER IMPLEMENTATION
    *&             Global Definitions
    DATA:      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
                G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
    DATA: OK_CODE LIKE SY-UCOMM,
          SAVE_OK LIKE SY-UCOMM,
          G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
          GS_LAYOUT TYPE LVC_S_LAYO.
    data: v_lines type i.
    data: v_line(3) type c.
    *- Fieldcatalog for First and second Report
    DATA: IT_FIELDCAT  TYPE  LVC_T_FCAT,
          X_FIELDCAT TYPE LVC_S_FCAT,
          LS_VARI  TYPE DISVARIANT.
    *                START-OF_SELECTION
    START-OF-SELECTION.
      SELECT VBELN
             POSNR
             FROM LIPS
             UP TO 20 ROWS
             INTO CORRESPONDING FIELDS OF TABLE ITAB.
    describe table itab lines v_lines.
    END-OF-SELECTION.
      IF NOT ITAB[] IS INITIAL.
        CALL SCREEN 100.
      ELSE.
        MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
      ENDIF.
    *&      Form  CREATE_AND_INIT_ALV
    *       text
    FORM CREATE_AND_INIT_ALV .
      DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
      "attention.....from here
      "split your container here...into two parts
      "create the container
      CREATE OBJECT G_CUSTOM_CONTAINER
               EXPORTING CONTAINER_NAME = G_CONTAINER1.
      "this is for top of page
    * Create TOP-Document
      CREATE OBJECT DG_DYNDOC_ID
                       EXPORTING STYLE = 'ALV_GRID'.
    * Create Splitter for custom_container
      CREATE OBJECT DG_SPLITTER
                 EXPORTING PARENT  = G_CUSTOM_CONTAINER
                           ROWS    = 2
                           COLUMNS = 1.
    * Split the custom_container to two containers and move the reference
    * to receiving containers g_parent_html and g_parent_grid
      "i am allocating the space for grid and top of page
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 1
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_HTML.
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 2
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_GRID.
    *  CALL METHOD DG_SPLITTER->GET_CONTAINER
    *    EXPORTING
    *      ROW       = 2
    *      COLUMN    = 1
    *    RECEIVING
    *      CONTAINER = DG_PARENT_HTML.
    *  CALL METHOD DG_SPLITTER->GET_CONTAINER
    *    EXPORTING
    *      ROW       = 1
    *      COLUMN    = 1
    *    RECEIVING
    *      CONTAINER = DG_PARENT_GRID.
      "you can set the height of it
    * Set height for g_parent_html
      CALL METHOD DG_SPLITTER->SET_ROW_HEIGHT
        EXPORTING
          ID     = 1
          HEIGHT = 5.
      "from here as usual..you need to specify parent as splitter part
      "which we alloted for grid
      CREATE OBJECT G_GRID
             EXPORTING I_PARENT = DG_PARENT_GRID.
    * Set a titlebar for the grid control
      CLEAR GS_LAYOUT.
      GS_LAYOUT-GRID_TITLE = TEXT-003.
      GS_LAYOUT-ZEBRA = SPACE.
      GS_LAYOUT-CWIDTH_OPT = 'X'.
      GS_LAYOUT-NO_ROWMARK = 'X'.
      GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
      CALL METHOD G_GRID->REGISTER_EDIT_EVENT
        EXPORTING
          I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
      CREATE OBJECT G_HANDLER.
      SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
      SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
    *  SET HANDLER G_HANDLER->END_OF_LIST FOR G_GRID.
      SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
      DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
      DATA: L_INDEX TYPE SY-TABIX.
      "Here i am changing the color of line 1,5,10...
      "so you can change the color of font conditionally
      LOOP AT ITAB.
        L_INDEX = SY-TABIX.
        IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
          LS_CELLCOLOR-FNAME = 'VBELN'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
          LS_CELLCOLOR-FNAME = 'POSNR'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
        ENDIF.
      ENDLOOP.
    * setting focus for created grid control
      CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
        EXPORTING
          CONTROL = G_GRID.
    * Build fieldcat and set editable for date and reason code
    * edit enabled. Assign a handle for the dropdown listbox.
      PERFORM BUILD_FIELDCAT.
      PERFORM  SET_DRDN_TABLE.
    * Optionally restrict generic functions to 'change only'.
    *   (The user shall not be able to add new lines).
      PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
    **Vaiant to save the layout
      LS_VARI-REPORT      = SY-REPID.
      LS_VARI-HANDLE      = SPACE.
      LS_VARI-LOG_GROUP   = SPACE.
      LS_VARI-USERNAME    = SPACE.
      LS_VARI-VARIANT     = SPACE.
      LS_VARI-TEXT        = SPACE.
      LS_VARI-DEPENDVARS  = SPACE.
    **Calling the Method for ALV output
      CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
          IS_VARIANT           = LS_VARI
          IS_LAYOUT            = GS_LAYOUT
          I_SAVE               = 'A'
        CHANGING
          IT_FIELDCATALOG      = IT_FIELDCAT
          IT_OUTTAB            = ITAB[].
      "do these..{
    * Initializing document
      CALL METHOD DG_DYNDOC_ID->INITIALIZE_DOCUMENT.
    * Processing events
      CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
        EXPORTING
          I_EVENT_NAME = 'TOP_OF_PAGE'
          I_DYNDOC_ID  = DG_DYNDOC_ID.
      "end }
    * Set editable cells to ready for input initially
      CALL METHOD G_GRID->SET_READY_FOR_INPUT
        EXPORTING
          I_READY_FOR_INPUT = 1.
    ENDFORM.                               "CREATE_AND_INIT_ALV
    *&      Form  EXCLUDE_TB_FUNCTIONS
    *       text
    *      -->PT_EXCLUDE text
    FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
    * Only allow to change data not to create new entries (exclude
    * generic functions).
      DATA LS_EXCLUDE TYPE UI_FUNC.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
    ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
    *&      Form  build_fieldcat
    *       Fieldcatalog
    FORM BUILD_FIELDCAT .
      DATA: L_POS TYPE I.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
      X_FIELDCAT-FIELDNAME = 'VBELN'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-NO_ZERO    = 'X'.
      X_FIELDCAT-OUTPUTLEN = '10'.
      X_FIELDCAT-HOTSPOT = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Item'(025).
      X_FIELDCAT-FIELDNAME = 'POSNR'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
      X_FIELDCAT-FIELDNAME = 'DROP'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      X_FIELDCAT-EDIT = 'X'.
      X_FIELDCAT-DRDN_HNDL = '1'.
      X_FIELDCAT-DRDN_ALIAS = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
    ENDFORM.                    " build_fieldcat
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'MAIN100'.
      SET TITLEBAR 'MAIN100'.
      IF G_CUSTOM_CONTAINER IS INITIAL.
    **Initializing the grid and calling the fm to Display the O/P
        PERFORM CREATE_AND_INIT_ALV.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE USER_COMMAND_0100 INPUT.
      CASE SY-UCOMM.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  SET_DRDN_TABLE
    *       text
    FORM SET_DRDN_TABLE.
      DATA:LT_DRAL TYPE LVC_T_DRAL,
            LS_DRAL TYPE LVC_S_DRAL.
      LOOP AT ITAB .
    * First listbox (handle '1').
        IF SY-INDEX = 1.
          LS_DRAL-HANDLE = '1'.
          LS_DRAL-VALUE =  ' '.
          LS_DRAL-INT_VALUE =  ' '.
        ELSE.
          LS_DRAL-HANDLE = '1'.
          LS_DRAL-VALUE =  ITAB-POSNR.
          LS_DRAL-INT_VALUE =  ITAB-POSNR.
        ENDIF.
        APPEND LS_DRAL TO LT_DRAL.
      ENDLOOP.
    **Setting the Drop down table for Reason Code
      CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
        EXPORTING
          IT_DROP_DOWN_ALIAS = LT_DRAL.
    ENDFORM.                               " set_drdn_table
    *&      Form  EVENT_TOP_OF_PAGE
    *       text
    *      -->DG_DYNDOC_ID  text
    FORM EVENT_TOP_OF_PAGE USING   DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
      "this is more clear.....check it
      "first add text, then pass it to comentry write fm
      DATA : DL_TEXT(255) TYPE C.  "Text
    * Populating header to top-of-page
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
          TEXT      = 'Test Report'
          SAP_STYLE = CL_DD_AREA=>HEADING.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move program ID
      CONCATENATE 'Program Name :' SY-REPID
             INTO DL_TEXT SEPARATED BY SPACE.
    * Add Program Name to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move User ID
      CONCATENATE 'User ID :' SY-UNAME INTO DL_TEXT SEPARATED BY SPACE
    * Add User ID to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move count (no of records).
      move v_lines to v_line.
      CONCATENATE 'No of records :' v_line INTO DL_TEXT SEPARATED BY SPACE.
    * Add Client to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move date
      WRITE SY-DATUM TO DL_TEXT.
      CONCATENATE 'Date :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    * Add Date to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move time
      WRITE SY-UZEIT TO DL_TEXT.
      CONCATENATE 'Time :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    * Add Time to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    * Populating data to html control
      PERFORM HTML.
    ENDFORM.                    " EVENT_TOP_OF_PAGE
    *&      Form  ADD_TEXT
    *       To add Text
    FORM ADD_TEXT USING P_TEXT TYPE SDYDO_TEXT_ELEMENT.
    * Adding text
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
          TEXT         = P_TEXT
          SAP_EMPHASIS = CL_DD_AREA=>HEADING.
    ENDFORM.                    " ADD_TEXT
    *&      Form  HTML
    *       text
    FORM HTML.
      DATA : DL_LENGTH  TYPE I,                           " Length
             DL_BACKGROUND_ID TYPE SDYDO_KEY VALUE SPACE. " Background_id
    * Creating html control
      IF DG_HTML_CNTRL IS INITIAL.
        CREATE OBJECT DG_HTML_CNTRL
             EXPORTING
                  PARENT    = DG_PARENT_HTML.
      ENDIF.
    * Reuse_alv_grid_commentary_set
      CALL FUNCTION 'REUSE_ALV_GRID_COMMENTARY_SET'
        EXPORTING
          DOCUMENT = DG_DYNDOC_ID
          BOTTOM   = SPACE
        IMPORTING
          LENGTH   = DL_LENGTH.
    * Get TOP->HTML_TABLE ready
      CALL METHOD DG_DYNDOC_ID->MERGE_DOCUMENT.
    * Set wallpaper
      CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
        EXPORTING
          PICTURE_ID = DL_BACKGROUND_ID.
    * Connect TOP document to HTML-Control
      DG_DYNDOC_ID->HTML_CONTROL = DG_HTML_CNTRL.
    * Display TOP document
      CALL METHOD DG_DYNDOC_ID->DISPLAY_DOCUMENT
        EXPORTING
          REUSE_CONTROL      = 'X'
          PARENT             = DG_PARENT_HTML
        EXCEPTIONS
          HTML_DISPLAY_ERROR = 1.
      IF SY-SUBRC NE 0.
        MESSAGE I999 WITH 'Error in displaying top-of-page'(036).
      ENDIF.
    ENDFORM.                    " HTML
    Regards
    vijay

  • Based from my code, how do I implement an ALV grid using OO concept...

    Hello experts,
    I am currently practicing ABAP Objects and I would like to use alv in my report. Now, How can I implement ALV in my report in the simplest way possible. Sample codes will be highly appreciated. Thanks guys and take care!
    REPORT  z_aris_oo_practice_9
            NO STANDARD PAGE HEADING
            LINE-SIZE 0
            LINE-COUNT 0.
    TABLES: spfli.
    Selection screen
    SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME.
    SELECTION-SCREEN BEGIN OF BLOCK box2 WITH FRAME.
    PARAMETERS: p_carrid TYPE spfli-carrid,
                p_connid TYPE spfli-connid.
    SELECTION-SCREEN END OF BLOCK box2.
    SELECTION-SCREEN BEGIN OF BLOCK box3 WITH FRAME.
    PARAMETERS: p_sumdis AS CHECKBOX.
    SELECTION-SCREEN END OF BLOCK box3.
    SELECTION-SCREEN END OF BLOCK box1.
          INTERFACE status
    INTERFACE status.
      METHODS write.
    ENDINTERFACE.                    "status
          CLASS main DEFINITION
    CLASS main DEFINITION.
      PUBLIC SECTION.
        INTERFACES status.
        METHODS: get_data,
                 combine_data.
        CLASS-DATA: counter TYPE i.
      PRIVATE SECTION.
        TYPES: BEGIN OF t_spfli,
             carrid    TYPE spfli-carrid,
             connid    TYPE spfli-connid,
             countryfr TYPE spfli-countryfr,
             cityfrom  TYPE spfli-cityfrom,
             airpfrom  TYPE spfli-airpfrom,
             countryto TYPE spfli-countryto,
             cityto    TYPE spfli-cityto,
             airpto    TYPE spfli-airpto,
             fltime    TYPE spfli-fltime,
             deptime   TYPE spfli-deptime,
             arrtime   TYPE spfli-arrtime,
            END OF t_spfli.
        DATA: it_spfli        TYPE STANDARD TABLE OF t_spfli.
    ENDCLASS.                    "main DEFINITION
          CLASS main IMPLEMENTATION
    CLASS main IMPLEMENTATION.
      METHOD status~write.
        WRITE: / 'The number of records is:', counter.
      ENDMETHOD.                    "status~write
      METHOD get_data.
        SELECT carrid   connid   countryfr
               cityfrom airpfrom countryto
               cityto   airpto   fltime
               deptime  arrtime
        FROM spfli
        INTO TABLE it_spfli
        WHERE carrid = p_carrid.
      ENDMETHOD.                    "get_data
      METHOD combine_data.
        FIELD-SYMBOLS: <fs_spfli> LIKE LINE OF it_spfli.
        LOOP AT it_spfli ASSIGNING <fs_spfli>.
          ADD 1 TO counter.
          WRITE: / <fs_spfli>-carrid,
                   <fs_spfli>-connid,
                   <fs_spfli>-countryfr,
                   <fs_spfli>-cityfrom,
                   <fs_spfli>-airpfrom,
                   <fs_spfli>-countryto,
                   <fs_spfli>-cityto,
                   <fs_spfli>-airpto,
                   <fs_spfli>-fltime,
                   <fs_spfli>-deptime,
                   <fs_spfli>-arrtime.
        ENDLOOP.
      ENDMETHOD.                    "show_data
    ENDCLASS.                    "main IMPLEMENTATION
    START-OF-SELECTION.
      DATA: main TYPE REF TO main,
            status TYPE REF TO status.
      CREATE OBJECT main.
      CALL METHOD main->get_data.
      CALL METHOD main->combine_data.
      CALL METHOD main->status~write.

    Hi,
    Check this example..., In this i implemented so many functionalities like top_of_page, drop_down at cell level etc.., also Check the programs BCALVEDIT also
    Just check it.
    REPORT  ZTEST_ALV_OO    MESSAGE-ID ZZ                           .
    DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_VALID TYPE C,
          V_FLAG,
          V_DATA_CHANGE,
          V_ROW TYPE LVC_S_ROW,
          V_COLUMN TYPE LVC_S_COL,
          V_ROW_NUM TYPE LVC_S_ROID.
    DATA: IT_ROW_NO TYPE LVC_T_ROID,
          X_ROW_NO TYPE LVC_S_ROID.
    DATA:BEGIN OF  ITAB OCCURS 0,
         VBELN LIKE LIKP-VBELN,
         POSNR LIKE LIPS-POSNR,
         CELLCOLOR TYPE LVC_T_SCOL, "required for color
         DROP(10),
         check,
         END OF ITAB.
    "The Below Definitions Must.....
    DATA:
    * Reference to document
           DG_DYNDOC_ID       TYPE REF TO CL_DD_DOCUMENT,
    * Reference to split container
           DG_SPLITTER          TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
    * Reference to grid container
           DG_PARENT_GRID     TYPE REF TO CL_GUI_CONTAINER,
    * Reference to html container
           DG_HTML_CNTRL        TYPE REF TO CL_GUI_HTML_VIEWER,
    * Reference to html container
           DG_PARENT_HTML     TYPE REF TO CL_GUI_CONTAINER.
    "up to here
    *       CLASS lcl_event_handler DEFINITION
    CLASS LCL_EVENT_HANDLER DEFINITION .
      PUBLIC SECTION .
        METHODS:
    **Hot spot Handler
        HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                          IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
    **Double Click Handler
        HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                                         IMPORTING E_ROW E_COLUMN ES_ROW_NO,
        TOP_OF_PAGE FOR EVENT TOP_OF_PAGE              "event handler
                             OF CL_GUI_ALV_GRID
                             IMPORTING E_DYNDOC_ID.
    *        END_OF_LIST FOR EVENT end_of_list              "event handler
    *                         OF CL_GUI_ALV_GRID
    *                         IMPORTING E_DYNDOC_ID.
    ENDCLASS.                    "lcl_event_handler DEFINITION
    *       CLASS lcl_event_handler IMPLEMENTATION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    *Handle Hotspot Click
      METHOD HANDLE_HOTSPOT_CLICK .
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW_ID.
        V_COLUMN = E_COLUMN_ID.
        V_ROW_NUM = ES_ROW_NO.
    *    MESSAGE I000 WITH V_ROW 'clicked'.
        CLEAR IT_ROW_NO[].
        X_ROW_NO-ROW_ID = V_ROW.
        APPEND X_ROW_NO TO IT_ROW_NO .
        CALL METHOD G_GRID->SET_SELECTED_ROWS
          EXPORTING
            IT_ROW_NO = IT_ROW_NO.
      ENDMETHOD.                    "lcl_event_handler
    *Handle Double Click
      METHOD  HANDLE_DOUBLE_CLICK.
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW.
        V_COLUMN = E_COLUMN.
        V_ROW_NUM = ES_ROW_NO.
        IF E_COLUMN = 'VBELN'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
        ENDIF.
        IF E_COLUMN = 'POSNR'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN."
        ENDIF.
      ENDMETHOD.                    "handle_double_click
    *  METHOD END_OF_LIST.                   "implementation
    ** Top-of-page event
    *    PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
    *  ENDMETHOD.                            "top_of_page
        METHOD TOP_OF_PAGE.                   "implementation
    * Top-of-page event
        PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
      ENDMETHOD.                            "top_of_page
    ENDCLASS.                    "LCL_EVENT_HANDLER IMPLEMENTATION
    *&             Global Definitions
    DATA:      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
                G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
    DATA: OK_CODE LIKE SY-UCOMM,
          SAVE_OK LIKE SY-UCOMM,
          G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
          GS_LAYOUT TYPE LVC_S_LAYO.
    data: v_lines type i.
    data: v_line(3) type c.
    *- Fieldcatalog for First and second Report
    DATA: IT_FIELDCAT  TYPE  LVC_T_FCAT,
          X_FIELDCAT TYPE LVC_S_FCAT,
          LS_VARI  TYPE DISVARIANT.
    *                START-OF_SELECTION
    START-OF-SELECTION.
      SELECT VBELN
             POSNR
             FROM LIPS
             UP TO 20 ROWS
             INTO CORRESPONDING FIELDS OF TABLE ITAB.
    describe table itab lines v_lines.
    END-OF-SELECTION.
      IF NOT ITAB[] IS INITIAL.
        CALL SCREEN 100.
      ELSE.
        MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
      ENDIF.
    *&      Form  CREATE_AND_INIT_ALV
    *       text
    FORM CREATE_AND_INIT_ALV .
      DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
      "attention.....from here
      "split your container here...into two parts
      "create the container
      CREATE OBJECT G_CUSTOM_CONTAINER
               EXPORTING CONTAINER_NAME = G_CONTAINER1.
      "this is for top of page
    * Create TOP-Document
      CREATE OBJECT DG_DYNDOC_ID
                       EXPORTING STYLE = 'ALV_GRID'.
    * Create Splitter for custom_container
      CREATE OBJECT DG_SPLITTER
                 EXPORTING PARENT  = G_CUSTOM_CONTAINER
                           ROWS    = 2
                           COLUMNS = 1.
    * Split the custom_container to two containers and move the reference
    * to receiving containers g_parent_html and g_parent_grid
      "i am allocating the space for grid and top of page
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 1
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_HTML.
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 2
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_GRID.
    *  CALL METHOD DG_SPLITTER->GET_CONTAINER
    *    EXPORTING
    *      ROW       = 2
    *      COLUMN    = 1
    *    RECEIVING
    *      CONTAINER = DG_PARENT_HTML.
    *  CALL METHOD DG_SPLITTER->GET_CONTAINER
    *    EXPORTING
    *      ROW       = 1
    *      COLUMN    = 1
    *    RECEIVING
    *      CONTAINER = DG_PARENT_GRID.
      "you can set the height of it
    * Set height for g_parent_html
      CALL METHOD DG_SPLITTER->SET_ROW_HEIGHT
        EXPORTING
          ID     = 1
          HEIGHT = 5.
      "from here as usual..you need to specify parent as splitter part
      "which we alloted for grid
      CREATE OBJECT G_GRID
             EXPORTING I_PARENT = DG_PARENT_GRID.
    * Set a titlebar for the grid control
      CLEAR GS_LAYOUT.
      GS_LAYOUT-GRID_TITLE = TEXT-003.
      GS_LAYOUT-ZEBRA = SPACE.
      GS_LAYOUT-CWIDTH_OPT = 'X'.
      GS_LAYOUT-NO_ROWMARK = 'X'.
      GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
      CALL METHOD G_GRID->REGISTER_EDIT_EVENT
        EXPORTING
          I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
      CREATE OBJECT G_HANDLER.
      SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
      SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
    *  SET HANDLER G_HANDLER->END_OF_LIST FOR G_GRID.
      SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
      DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
      DATA: L_INDEX TYPE SY-TABIX.
      "Here i am changing the color of line 1,5,10...
      "so you can change the color of font conditionally
      LOOP AT ITAB.
        L_INDEX = SY-TABIX.
        IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
          LS_CELLCOLOR-FNAME = 'VBELN'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
          LS_CELLCOLOR-FNAME = 'POSNR'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
        ENDIF.
      ENDLOOP.
    * setting focus for created grid control
      CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
        EXPORTING
          CONTROL = G_GRID.
    * Build fieldcat and set editable for date and reason code
    * edit enabled. Assign a handle for the dropdown listbox.
      PERFORM BUILD_FIELDCAT.
      PERFORM  SET_DRDN_TABLE.
    * Optionally restrict generic functions to 'change only'.
    *   (The user shall not be able to add new lines).
      PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
    **Vaiant to save the layout
      LS_VARI-REPORT      = SY-REPID.
      LS_VARI-HANDLE      = SPACE.
      LS_VARI-LOG_GROUP   = SPACE.
      LS_VARI-USERNAME    = SPACE.
      LS_VARI-VARIANT     = SPACE.
      LS_VARI-TEXT        = SPACE.
      LS_VARI-DEPENDVARS  = SPACE.
    **Calling the Method for ALV output
      CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
          IS_VARIANT           = LS_VARI
          IS_LAYOUT            = GS_LAYOUT
          I_SAVE               = 'A'
        CHANGING
          IT_FIELDCATALOG      = IT_FIELDCAT
          IT_OUTTAB            = ITAB[].
      "do these..{
    * Initializing document
      CALL METHOD DG_DYNDOC_ID->INITIALIZE_DOCUMENT.
    * Processing events
      CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
        EXPORTING
          I_EVENT_NAME = 'TOP_OF_PAGE'
          I_DYNDOC_ID  = DG_DYNDOC_ID.
      "end }
    * Set editable cells to ready for input initially
      CALL METHOD G_GRID->SET_READY_FOR_INPUT
        EXPORTING
          I_READY_FOR_INPUT = 1.
    ENDFORM.                               "CREATE_AND_INIT_ALV
    *&      Form  EXCLUDE_TB_FUNCTIONS
    *       text
    *      -->PT_EXCLUDE text
    FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
    * Only allow to change data not to create new entries (exclude
    * generic functions).
      DATA LS_EXCLUDE TYPE UI_FUNC.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
    ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
    *&      Form  build_fieldcat
    *       Fieldcatalog
    FORM BUILD_FIELDCAT .
      DATA: L_POS TYPE I.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Check'.
      X_FIELDCAT-FIELDNAME = 'CHECK'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-CHECKbox   = 'X'.
        X_FIELDCAT-EDIT = 'X'.
      X_FIELDCAT-OUTPUTLEN = '1'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
      X_FIELDCAT-FIELDNAME = 'VBELN'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-NO_ZERO    = 'X'.
      X_FIELDCAT-OUTPUTLEN = '10'.
      X_FIELDCAT-HOTSPOT = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Item'(025).
      X_FIELDCAT-FIELDNAME = 'POSNR'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
      X_FIELDCAT-FIELDNAME = 'DROP'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      X_FIELDCAT-EDIT = 'X'.
      X_FIELDCAT-DRDN_HNDL = '1'.
      X_FIELDCAT-DRDN_ALIAS = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
    ENDFORM.                    " build_fieldcat
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'MAIN100'.
      SET TITLEBAR 'MAIN100'.
      IF G_CUSTOM_CONTAINER IS INITIAL.
    **Initializing the grid and calling the fm to Display the O/P
        PERFORM CREATE_AND_INIT_ALV.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE USER_COMMAND_0100 INPUT.
      CASE SY-UCOMM.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  SET_DRDN_TABLE
    *       text
    FORM SET_DRDN_TABLE.
      DATA:LT_DRAL TYPE LVC_T_DRAL,
            LS_DRAL TYPE LVC_S_DRAL.
      LOOP AT ITAB .
    * First listbox (handle '1').
        IF SY-INDEX = 1.
          LS_DRAL-HANDLE = '1'.
          LS_DRAL-VALUE =  ' '.
          LS_DRAL-INT_VALUE =  ' '.
        ELSE.
          LS_DRAL-HANDLE = '1'.
          LS_DRAL-VALUE =  ITAB-POSNR.
          LS_DRAL-INT_VALUE =  ITAB-POSNR.
        ENDIF.
        APPEND LS_DRAL TO LT_DRAL.
      ENDLOOP.
    **Setting the Drop down table for Reason Code
      CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
        EXPORTING
          IT_DROP_DOWN_ALIAS = LT_DRAL.
    ENDFORM.                               " set_drdn_table
    *&      Form  EVENT_TOP_OF_PAGE
    *       text
    *      -->DG_DYNDOC_ID  text
    FORM EVENT_TOP_OF_PAGE USING   DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
      "this is more clear.....check it
      "first add text, then pass it to comentry write fm
      DATA : DL_TEXT(255) TYPE C.  "Text
    * Populating header to top-of-page
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
          TEXT      = 'Test Report'
          SAP_STYLE = CL_DD_AREA=>HEADING.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move program ID
      CONCATENATE 'Program Name :' SY-REPID
             INTO DL_TEXT SEPARATED BY SPACE.
    * Add Program Name to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move User ID
      CONCATENATE 'User ID :' SY-UNAME INTO DL_TEXT SEPARATED BY SPACE
    * Add User ID to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move count (no of records).
      move v_lines to v_line.
      CONCATENATE 'No of records :' v_line INTO DL_TEXT SEPARATED BY SPACE.
    * Add Client to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move date
      WRITE SY-DATUM TO DL_TEXT.
      CONCATENATE 'Date :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    * Add Date to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
      CLEAR : DL_TEXT.
    * Move time
      WRITE SY-UZEIT TO DL_TEXT.
      CONCATENATE 'Time :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    * Add Time to Document
      PERFORM ADD_TEXT USING DL_TEXT.
    * Add new-line
      CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    * Populating data to html control
      PERFORM HTML.
    ENDFORM.                    " EVENT_TOP_OF_PAGE
    *&      Form  ADD_TEXT
    *       To add Text
    FORM ADD_TEXT USING P_TEXT TYPE SDYDO_TEXT_ELEMENT.
    * Adding text
      CALL METHOD DG_DYNDOC_ID->ADD_TEXT
        EXPORTING
          TEXT         = P_TEXT
          SAP_EMPHASIS = CL_DD_AREA=>HEADING.
    ENDFORM.                    " ADD_TEXT
    *&      Form  HTML
    *       text
    FORM HTML.
      DATA : DL_LENGTH  TYPE I,                           " Length
             DL_BACKGROUND_ID TYPE SDYDO_KEY VALUE SPACE. " Background_id
    * Creating html control
      IF DG_HTML_CNTRL IS INITIAL.
        CREATE OBJECT DG_HTML_CNTRL
             EXPORTING
                  PARENT    = DG_PARENT_HTML.
      ENDIF.
    * Reuse_alv_grid_commentary_set
      CALL FUNCTION 'REUSE_ALV_GRID_COMMENTARY_SET'
        EXPORTING
          DOCUMENT = DG_DYNDOC_ID
          BOTTOM   = SPACE
        IMPORTING
          LENGTH   = DL_LENGTH.
    * Get TOP->HTML_TABLE ready
      CALL METHOD DG_DYNDOC_ID->MERGE_DOCUMENT.
    * Set wallpaper
      CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
        EXPORTING
          PICTURE_ID = DL_BACKGROUND_ID.
    * Connect TOP document to HTML-Control
      DG_DYNDOC_ID->HTML_CONTROL = DG_HTML_CNTRL.
    * Display TOP document
      CALL METHOD DG_DYNDOC_ID->DISPLAY_DOCUMENT
        EXPORTING
          REUSE_CONTROL      = 'X'
          PARENT             = DG_PARENT_HTML
        EXCEPTIONS
          HTML_DISPLAY_ERROR = 1.
      IF SY-SUBRC NE 0.
        MESSAGE I999 WITH 'Error in displaying top-of-page'(036).
      ENDIF.
    ENDFORM.                    " HTML
    Regards
    vijay

  • Alignment Grids for Titler in PrE & PrPro

    There have been several discussions on the lack of real alignment tools in Titler, for both PrE and PrPro. I use a workaround to this, and just Import a "grid" image, created in PS and Saved to .PSD with Transparency. I use the same technique to build layouts for PiP and similar.
    One just Imports the .PSD into their NLE (Non Linear Editing) program, as a still, or as Footage in PrPro. The .PSD is then placed on the Timeline in a Video Track above any other Clips. The Title is then placed above the .PSD. In PrE, one sees the Video below the Title automatically. In PrPro there is a checkbox to do this.
    The grid in the .PSD is used for alignment of the elements/text in the Title.
    Be sure to remove the grid, when you are done, or in PrPro, you can turn off visibility for its Video Track. Otherwise, you WILL Export the grid, and that is not what you will likely want to do. Do not forget to disable this .PSD, before the Export.
    Attached are an NTSC 16:9 .PSD and an NTSC 4:3 .PSD, with proper PAR for each.
    Hope that this helps someone, where they need better alignment in Titler in either PrE, or PrPro.
    Hunt

    Hi
    I tested the grid idea...works well.  I ended up layering stills with transparency to see the grid and line up ...I did a test title page and stills in the same psd file...and I didn't create an overall background image...but left the screen black (black video) in premiere...can do background image later...this was first time doing a layered psd to premiere...
    I found the grid (especially with the various "weights" of letters in different fonts ( like the letter T or the letter O ) need to be shifted a bit for balance and the grid helps a lot with that, as well as the horizontal postition of the images.  For some reason the images appear to go into layer OK vertically (centered at least, and can adjust from there depending again on "weight" issue), but horizontally they are off a bit (not centered exactly) all the time.
    At any rate, I can see how the grid helps to get a reference for lining things up...so thanks for uploading that and sharing it.
    I ended up using the eyeball and transparency a lot in psd, finally turning everything on and opaque before saving for import to premiere, and when in premiere I did what you suggested..put the grid on top video channel and it worked well.
    Rod
    ps. I'm finding it fun to do my own cross dissolves...so they aren't all the same exactly.  Takes time though...so I can see big benefit to just using preset with a lot of images to deal with.

  • OOP's ALV with top of page

    Hi,
    Does any one have code or pointers for creating a ALV with top of page using OOPS.
    I need to create a top of page with variables like :
    Report Name : ZABC
    User Name : Z234ASD
    Date : System Date
    Time : System Time
    Transaction : ZXYZ
    Thanks
    Khan.

    The code i used to implement top of page for OO ALV is as below but when you proceed to print out the report, it doesn't print out the header as the list output doesn't show the header.
    codeREPORT ZTEST1234_ALV_TOP MESSAGE-ID ZZ .
    DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_VALID TYPE C,
    V_FLAG,
    V_DATA_CHANGE,
    V_ROW TYPE LVC_S_ROW,
    V_COLUMN TYPE LVC_S_COL,
    V_ROW_NUM TYPE LVC_S_ROID.
    "The Below Definitions Must.....
    DATA:
    Reference to document
    DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
    Reference to split container
    DG_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
    Reference to grid container
    DG_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER,
    Reference to html container
    DG_HTML_CNTRL TYPE REF TO CL_GUI_HTML_VIEWER,
    Reference to html container
    DG_PARENT_HTML TYPE REF TO CL_GUI_CONTAINER.
    "up to here
    CLASS lcl_event_handler DEFINITION
    CLASS LCL_EVENT_HANDLER DEFINITION .
    PUBLIC SECTION .
    METHODS:
    **Hot spot Handler
    HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
    IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
    **Double Click Handler
    HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
    IMPORTING E_ROW E_COLUMN ES_ROW_NO,
    TOP_OF_PAGE FOR EVENT TOP_OF_PAGE "event handler
    OF CL_GUI_ALV_GRID
    IMPORTING E_DYNDOC_ID.
    ENDCLASS. "lcl_event_handler DEFINITION
    CLASS lcl_event_handler IMPLEMENTATION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    *Handle Hotspot Click
    METHOD HANDLE_HOTSPOT_CLICK .
    CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
    V_ROW = E_ROW_ID.
    V_COLUMN = E_COLUMN_ID.
    V_ROW_NUM = ES_ROW_NO.
    MESSAGE I000 WITH V_ROW 'clicked'.
    ENDMETHOD. "lcl_event_handler
    *Handle Double Click
    METHOD HANDLE_DOUBLE_CLICK.
    ENDMETHOD. "handle_double_click
    METHOD TOP_OF_PAGE. "implementation
    Top-of-page event
    PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
    ENDMETHOD. "top_of_page
    ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
    *& Global Definitions
    DATA: G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
    G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
    DATA: OK_CODE LIKE SY-UCOMM,
    SAVE_OK LIKE SY-UCOMM,
    G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
    GS_LAYOUT TYPE LVC_S_LAYO.
    Fieldcatalog for First and second Report
    DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
    X_FIELDCAT TYPE LVC_S_FCAT,
    LS_VARI TYPE DISVARIANT.
    START-OF_SELECTION
    START-OF-SELECTION.
    DATA:BEGIN OF ITAB OCCURS 0,
    VBELN LIKE LIKP-VBELN,
    POSNR LIKE LIPS-POSNR,
    CELLCOLOR TYPE LVC_T_SCOL, "required for color
    DROP(10),
    END OF ITAB.
    SELECT VBELN
    POSNR
    FROM LIPS
    UP TO 20 ROWS
    INTO CORRESPONDING FIELDS OF TABLE ITAB.
    END-OF-SELECTION.
    IF NOT ITAB[] IS INITIAL.
    CALL SCREEN 100.
    ELSE.
    MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
    ENDIF.
    *& Form CREATE_AND_INIT_ALV
    text
    FORM CREATE_AND_INIT_ALV .
    DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
    "attention.....from here
    "split your container here...into two parts
    "create the container
    CREATE OBJECT G_CUSTOM_CONTAINER
    EXPORTING CONTAINER_NAME = G_CONTAINER1.
    "this is for top of page
    Create TOP-Document
    CREATE OBJECT DG_DYNDOC_ID
    EXPORTING STYLE = 'ALV_GRID'.
    Create Splitter for custom_container
    CREATE OBJECT DG_SPLITTER
    EXPORTING PARENT = G_CUSTOM_CONTAINER
    ROWS = 2
    COLUMNS = 1.
    Split the custom_container to two containers and move the reference
    to receiving containers g_parent_html and g_parent_grid
    "i am allocating the space for grid and top of page
    CALL METHOD DG_SPLITTER->GET_CONTAINER
    EXPORTING
    ROW = 1
    COLUMN = 1
    RECEIVING
    CONTAINER = DG_PARENT_HTML.
    CALL METHOD DG_SPLITTER->GET_CONTAINER
    EXPORTING
    ROW = 2
    COLUMN = 1
    RECEIVING
    CONTAINER = DG_PARENT_GRID.
    "you can set the height of it
    Set height for g_parent_html
    CALL METHOD DG_SPLITTER->SET_ROW_HEIGHT
    EXPORTING
    ID = 1
    HEIGHT = 5.
    "from here as usual..you need to specify parent as splitter part
    "which we alloted for grid
    CREATE OBJECT G_GRID
    EXPORTING I_PARENT = DG_PARENT_GRID.
    Set a titlebar for the grid control
    CLEAR GS_LAYOUT.
    GS_LAYOUT-GRID_TITLE = TEXT-003.
    GS_LAYOUT-ZEBRA = SPACE.
    GS_LAYOUT-CWIDTH_OPT = 'X'.
    GS_LAYOUT-NO_ROWMARK = 'X'.
    GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
    CALL METHOD G_GRID->REGISTER_EDIT_EVENT
    EXPORTING
    I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
    CREATE OBJECT G_HANDLER.
    SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
    SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
    SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
    DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
    DATA: L_INDEX TYPE SY-TABIX.
    "Here i am changing the color of line 1,5,10...
    "so you can change the color of font conditionally
    LOOP AT ITAB.
    L_INDEX = SY-TABIX.
    IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
    LS_CELLCOLOR-FNAME = 'VBELN'.
    LS_CELLCOLOR-COLOR-COL = '6'.
    LS_CELLCOLOR-COLOR-INT = '0'.
    LS_CELLCOLOR-COLOR-INV = '1'.
    APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
    MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
    LS_CELLCOLOR-FNAME = 'POSNR'.
    LS_CELLCOLOR-COLOR-COL = '6'.
    LS_CELLCOLOR-COLOR-INT = '0'.
    LS_CELLCOLOR-COLOR-INV = '1'.
    APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
    MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
    ENDIF.
    ENDLOOP.
    setting focus for created grid control
    CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
    EXPORTING
    CONTROL = G_GRID.
    Build fieldcat and set editable for date and reason code
    edit enabled. Assign a handle for the dropdown listbox.
    PERFORM BUILD_FIELDCAT.
    PERFORM SET_DRDN_TABLE.
    Optionally restrict generic functions to 'change only'.
    (The user shall not be able to add new lines).
    PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
    **Vaiant to save the layout
    LS_VARI-REPORT = SY-REPID.
    LS_VARI-HANDLE = SPACE.
    LS_VARI-LOG_GROUP = SPACE.
    LS_VARI-USERNAME = SPACE.
    LS_VARI-VARIANT = SPACE.
    LS_VARI-TEXT = SPACE.
    LS_VARI-DEPENDVARS = SPACE.
    **Calling the Method for ALV output
    CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
    IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
    IS_VARIANT = LS_VARI
    IS_LAYOUT = GS_LAYOUT
    I_SAVE = 'A'
    CHANGING
    IT_FIELDCATALOG = IT_FIELDCAT
    IT_OUTTAB = ITAB[].
    "do these..{
    Initializing document
    CALL METHOD DG_DYNDOC_ID->INITIALIZE_DOCUMENT.
    Processing events
    CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
    EXPORTING
    I_EVENT_NAME = 'TOP_OF_PAGE'
    I_DYNDOC_ID = DG_DYNDOC_ID.
    "end }
    Set editable cells to ready for input initially
    CALL METHOD G_GRID->SET_READY_FOR_INPUT
    EXPORTING
    I_READY_FOR_INPUT = 1.
    ENDFORM. "CREATE_AND_INIT_ALV
    *& Form EXCLUDE_TB_FUNCTIONS
    text
    -->PT_EXCLUDE text
    FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
    Only allow to change data not to create new entries (exclude
    generic functions).
    DATA LS_EXCLUDE TYPE UI_FUNC.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
    APPEND LS_EXCLUDE TO PT_EXCLUDE.
    ENDFORM. " EXCLUDE_TB_FUNCTIONS
    *& Form build_fieldcat
    Fieldcatalog
    FORM BUILD_FIELDCAT .
    DATA: L_POS TYPE I.
    L_POS = L_POS + 1.
    X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
    X_FIELDCAT-FIELDNAME = 'VBELN'.
    X_FIELDCAT-TABNAME = 'IT_FINAL'.
    X_FIELDCAT-COL_POS = L_POS.
    X_FIELDCAT-NO_ZERO = 'X'.
    X_FIELDCAT-OUTPUTLEN = '10'.
    X_FIELDCAT-HOTSPOT = 'X'.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    L_POS = L_POS + 1.
    X_FIELDCAT-SCRTEXT_M = 'Item'(025).
    X_FIELDCAT-FIELDNAME = 'POSNR'.
    X_FIELDCAT-TABNAME = 'IT_FINAL'.
    X_FIELDCAT-COL_POS = L_POS.
    X_FIELDCAT-OUTPUTLEN = '5'.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    L_POS = L_POS + 1.
    X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
    X_FIELDCAT-FIELDNAME = 'DROP'.
    X_FIELDCAT-TABNAME = 'IT_FINAL'.
    X_FIELDCAT-COL_POS = L_POS.
    X_FIELDCAT-OUTPUTLEN = '5'.
    X_FIELDCAT-EDIT = 'X'.
    X_FIELDCAT-DRDN_HNDL = '1'.
    X_FIELDCAT-DRDN_ALIAS = 'X'.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    ENDFORM. " build_fieldcat
    *& Module STATUS_0100 OUTPUT
    text
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS 'MAIN100'.
    SET TITLEBAR 'MAIN100'.
    IF G_CUSTOM_CONTAINER IS INITIAL.
    **Initializing the grid and calling the fm to Display the O/P
    PERFORM CREATE_AND_INIT_ALV.
    ENDIF.
    ENDMODULE. " STATUS_0100 OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    text
    MODULE USER_COMMAND_0100 INPUT.
    CASE SY-UCOMM.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *& Form SET_DRDN_TABLE
    text
    FORM SET_DRDN_TABLE.
    DATA:LT_DRAL TYPE LVC_T_DRAL,
    LS_DRAL TYPE LVC_S_DRAL.
    LOOP AT ITAB .
    First listbox (handle '1').
    IF SY-INDEX = 1.
    LS_DRAL-HANDLE = '1'.
    LS_DRAL-VALUE = ' '.
    LS_DRAL-INT_VALUE = ' '.
    ELSE.
    LS_DRAL-HANDLE = '1'.
    LS_DRAL-VALUE = ITAB-POSNR.
    LS_DRAL-INT_VALUE = ITAB-POSNR.
    ENDIF.
    APPEND LS_DRAL TO LT_DRAL.
    ENDLOOP.
    **Setting the Drop down table for Reason Code
    CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
    EXPORTING
    IT_DROP_DOWN_ALIAS = LT_DRAL.
    ENDFORM. " set_drdn_table
    *& Form EVENT_TOP_OF_PAGE
    text
    -->DG_DYNDOC_ID text
    FORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
    "this is more clear.....check it
    "first add text, then pass it to comentry write fm
    DATA : DL_TEXT(255) TYPE C. "Text
    Populating header to top-of-page
    CALL METHOD DG_DYNDOC_ID->ADD_TEXT
    EXPORTING
    TEXT = 'Test Report'
    SAP_STYLE = CL_DD_AREA=>HEADING.
    Add new-line
    CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    CLEAR : DL_TEXT.
    Move program ID
    CONCATENATE 'Program Name :' SY-REPID
    INTO DL_TEXT SEPARATED BY SPACE.
    Add Program Name to Document
    PERFORM ADD_TEXT USING DL_TEXT.
    Add new-line
    CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    CLEAR : DL_TEXT.
    Move User ID
    CONCATENATE 'User ID :' SY-UNAME INTO DL_TEXT SEPARATED BY SPACE
    Add User ID to Document
    PERFORM ADD_TEXT USING DL_TEXT.
    Add new-line
    CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    CLEAR : DL_TEXT.
    Move Client
    CONCATENATE 'Client :' SY-MANDT INTO DL_TEXT SEPARATED BY SPACE.
    Add Client to Document
    PERFORM ADD_TEXT USING DL_TEXT.
    Add new-line
    CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    CLEAR : DL_TEXT.
    Move date
    WRITE SY-DATUM TO DL_TEXT.
    CONCATENATE 'Date :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    Add Date to Document
    PERFORM ADD_TEXT USING DL_TEXT.
    Add new-line
    CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    CLEAR : DL_TEXT.
    Move time
    WRITE SY-UZEIT TO DL_TEXT.
    CONCATENATE 'Time :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
    Add Time to Document
    PERFORM ADD_TEXT USING DL_TEXT.
    Add new-line
    CALL METHOD DG_DYNDOC_ID->NEW_LINE.
    Populating data to html control
    PERFORM HTML.
    ENDFORM. " EVENT_TOP_OF_PAGE
    *& Form ADD_TEXT
    To add Text
    FORM ADD_TEXT USING P_TEXT TYPE SDYDO_TEXT_ELEMENT.
    Adding text
    CALL METHOD DG_DYNDOC_ID->ADD_TEXT
    EXPORTING
    TEXT = P_TEXT
    SAP_EMPHASIS = CL_DD_AREA=>HEADING.
    ENDFORM. " ADD_TEXT
    *& Form HTML
    text
    FORM HTML.
    DATA : DL_LENGTH TYPE I, " Length
    DL_BACKGROUND_ID TYPE SDYDO_KEY VALUE SPACE. " Background_id
    Creating html control
    IF DG_HTML_CNTRL IS INITIAL.
    CREATE OBJECT DG_HTML_CNTRL
    EXPORTING
    PARENT = DG_PARENT_HTML.
    ENDIF.
    Reuse_alv_grid_commentary_set
    CALL FUNCTION 'REUSE_ALV_GRID_COMMENTARY_SET'
    EXPORTING
    DOCUMENT = DG_DYNDOC_ID
    BOTTOM = SPACE
    IMPORTING
    LENGTH = DL_LENGTH.
    Get TOP->HTML_TABLE ready
    CALL METHOD DG_DYNDOC_ID->MERGE_DOCUMENT.
    Set wallpaper
    CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
    EXPORTING
    PICTURE_ID = DL_BACKGROUND_ID.
    Connect TOP document to HTML-Control
    DG_DYNDOC_ID->HTML_CONTROL = DG_HTML_CNTRL.
    Display TOP document
    CALL METHOD DG_DYNDOC_ID->DISPLAY_DOCUMENT
    EXPORTING
    REUSE_CONTROL = 'X'
    PARENT = DG_PARENT_HTML
    EXCEPTIONS
    HTML_DISPLAY_ERROR = 1.
    IF SY-SUBRC NE 0.
    MESSAGE I999 WITH 'Error in displaying top-of-page'(036).
    ENDIF.
    ENDFORM. " HTML
    [/code]

  • How to draw a graph of tree structure (using shapes and lines)?

    Hello,
    I tried to search this solution in the forum, and I see people asking and replying with solutions to similar situation, but I don't get what I am looking for. Also because I have never tried with graphs before.
    So, my problem is, I need a function that takes a string with tree structure, as in automata or tree graph, and displays the nodes in tree form. "Tree" is not important, but important is that each object should be displayed as a node and lines connecting them. Please see the image below (with three possible options):
    So, basically, the tree structure could be like X(a, X(a,b), c) where X(a,b) is a sub-tree of higher level X. The program knows the parent-child relationship, so this function only needs to display those elements in a graphical fashion.
    I pass the string in the form of a 2D array showing the hierarchy (to simplify).
    In the image, I am showing three possible options for showing the tree. The third option eliminates those circles and rectangles, if that simplifies.
    I hope I explained clearly.
    Thanks ahead!
    Vaibhav

    I would start drawing from the top. The nodes will be the easy part.
    Begin with the root node centered in the drawing area horizontally and against the top of the drawing area. The second row of nodes would be located vertically (as in my example) 1.5x pixels below the first one, and either distributed horizontally across the available drawing area or at a fixed distance - like 1.5x again, or someother distance you define.
    The tricky part will be drawing the lines since they need run between the edges of nodes. This is where the high-school geometry might come in.
    Keep us posted on what you come up with. Extra points for coming up with a solution that will automatically resize itself to fit the available drawing area! (I've already given you all the clues for how to do that too.)
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Modify grid size in dashboard view

    I have a dashboard that has a few dashboards within. I end up needing about 12 "grids", which I do by having a master two grid dashboard. The left side is two grids on top of one another showing some graphs (performance widget). The right side
    is two grids beside each other. Within the two on the right, I have 5 grids on top of each other for different performance object widgets. Now, the real estate obviously is a little (okay, a LOT) too tight. I have very little information in each grid, so I
    have a lot of extra white space and scroll bars to be able to see the other grids. Is there a way that I can change the height of the grid, so that I can get the five to show in a single window? I would have thought it would "auto adjust to fit"
    or some such thing, but there has to be a way to define the size so I can design my dashboard to be more effective?
    Thanks in advance!
    mpleaf

    Hi,
    As far as I know, we cannot define the size of each cell for grids. But we can re-configure those cell layout. Please right click the dashboard, and choose properties, and then choose the proper layout according to your requirements.
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for

  • Error trying to import raw files from NIKON to Lightroom

    I am an amateur photographer. I just purchased a brand new NIKON D3300 took a few pictures, signed up for the Adobe annual Photographers Creative Cloud annual program and my first task to have Lightroom import a few test photos fails and I have no cl

  • My phone is awfully slow after installing os7

    I regret having installed OS7.  Every application takes forever to open

  • Parallel query clarification

    Hi, I am working on Oracle 10.2.0.4 2 node RAC database(Solaris 10, SPARC). I have a table containing around 10 million rows occupying 10G storage. To test the benefits of partitioning I created a partitioned table and then tried inserting all the re

  • Steps to create a planning folder in detail.

    hai friends,              i am new to BPS .i want to create a planning folder.so i need detail steps and documentation. Thankyou, shankar.

  • Best Format for Archiving Video Files

    I am importing old VHS and 8mm family videos for my cousin, to both burn them to DVD, and to archive the movies in case he wants to edit them later. I am planning on purchasing for him, a "write once," external HDD, probably firewire, (though I am op