"group", "link" and "nest" -- difference?

You can group, link and test video clips on the timeline. The "nest" one is the only one that seems to actually do anything similar to what I expect. Both group and link don't seem to do a gosh darn thing!

Group clips
Link and unlink video and audio clips
Nesting sequences
Premiere Pro CS5-CS6 Reference
(.pdf 12 MB download)
http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

Similar Messages

Webdynpro IWDTable - Item table , grouped column and Column difference?

I had added Column to Table in webdynpro java UI
but , when I am getting the values for the same from BAPI was displayed but , when I am saving , it is not saving
Is there any difference between GroupedColumn and Column?
The other columns which were there in the table are all Grouped Column for the ItemTable.
Also, when I deployed the code in the j2ee server, when I open my UWL , the columns are displayed in the bottom .. whether it is coming because I have not groupedcolumn?
Thanks in advance...
Kiran

I had added Column to Table in webdynpro java UI
but , when I am getting the values for the same from BAPI was displayed but , when I am saving , it is not saving
Is there any difference between GroupedColumn and Column?
The other columns which were there in the table are all Grouped Column for the ItemTable.
Also, when I deployed the code in the j2ee server, when I open my UWL , the columns are displayed in the bottom .. whether it is coming because I have not groupedcolumn?
Thanks in advance...
Kiran

Query hangs using db link and nested table collection

Hi,
I have a stored procedure which takes, as input, a string of values that can vary in length. The input is used as an IN operator within the queries that exist within the proc:
Code:
PROCEDURE get_contacts (i_customerids IN VARCHAR2)
an example of the input would be: '987451',412897' or '7541256','75412','95412589'
In order to process the dynamic "In-List", I created a custom collection type to convert the string to a table:
Code:
CREATE OR REPLACE
TYPE stringtotable AS TABLE OF VARCHAR2(3900)
(I've also tried the solutions on http://tkyte.blogspot.com/2006/06/varying-in-lists.html and http://fdegrelle.over-blog.com/article-1694534-6.html for handling dynamic in-lists and they also hang)
The proc contains 2 queries, the first returns records from a table within the current database:
Code:
SELECT *
FROM contacts
WHERE customer_id IN (
SELECT *
FROM TABLE (stringtotable (i_customerids
The second query returns records from a database that is defined via a db link:
Code:
SELECT b.customer_id, a.row_id, a.fst_name, a.last_name
FROM userlist.customers@uldblink a, userlist.firms@ulbdlink b
WHERE a.parent_id = b.row_id
AND b.customer_id IN (
SELECT *
FROM TABLE (stringtotable (i_customerids
The first query is executing without issue. The second query, however, is hanging indefinitely. Additionally, If I hard code the string in the IN operator, the second query executes without issue.
I am not the DBA for the database, so I don't currently have access to the trace logs. I've requested access to the trace logs to see if I can figure out what is hanging.
In the meantime, I was hoping someone would be able to tell me if
a: there is a better way to handle "dynamic in- lists".
or
b: if there is something obvious that I'm not considering.
Thanks for your help,
Fielding
Message was edited by:
fwilson

Hi Todd,
Thanks for the suggestion. I was not aware of the cardinality hint.
I tried adding it to my query but unfortunately the query still appeared to hang. It did get me thinking though... that maybe the stringtotable collection type is creating the table in memory, and therefore its records aren't accessible to the dblink
so I inserted the values that were being returned via the stringtotable collection type into a physical table named TestTable. I then modified my query to select the values from TestTable.
Code:
...in (select /*+ cardinality(t 3) */ t.*
from testtable t)
This worked.
So that poses the questions-
a: is my assumption about the in-memory table correct
and
b: if so is there a way around it?
Thanks for your help

DB Link and nested tables

Is there any way of passing a PL/SQL nested table (IS TABLE OF xxx) when calling a procedure or package across a DB Link in 9i? It does not appear to be possible due to the limitation on use of user types.
Thanks

I would be inclined to discourage you from using nested tables in almost any context. What is the business problem you are trying to solve?
Not coding problem ... business problem.
Perhaps we can suggest a better way to approach the problem.

Is there a way to remove my facebook contacts from my phone contacts list? I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out throu

Is there a way to remove my facebook contacts from my phone contacts list? I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out through the settings feature or anything else....HELP please as it is annoying to see all of these contacts!

Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

10.5.1 update and nested Smart Groups

After installing the 10.5.1 update, it seems that my address book smart groups no longer "nest" properly within regular address book groups.
Example: I have several smart groups built with rules like "email contains company X", these smart groups have all been added to a group called "work". It seems like the "work" group no longer recognizes members of smart group "Company A". For example, an email addressed to "work" does not include any company A members. Also, Mail.app rules based on "sender is a member of group "work".
I've tried rebooting, re-importing my original address book, and deleting existing address book contents and rebuilding groups from scratch.

I am able to launch FCE 3.5.1 on 10.5.1 without issues.
You may want to trash your FCE preferences (~Library/Preference/...), if you haven't already tried that, as they may have been corrupted.

Link and Backlink attributes in OID??? Retrieving the groups of a user???

Hello,
is there anything in Oracle Internet Directory that corresponds to what in Microsoft Active Directory are links and backlinks???
Having placed a user inside a set of groups, how can I efficiently retrieve the list of groups the user belongs to??? In AD links and backlinks are used for this: when I place a user inside a group the member attribute on the group is populated with the DN of the user and AD places the DN of the group inside the memberOf backlink attribute of the user. This allows for efficiently retrieving the list of groups the user belongs to. How does all this work in OID???
Thanks.
Bob

Hi prigas
Yes, I also thought this Q was rather rough.. Here's a copy & paste of the question, ANY help whatsoever would be appreciated - even if you have hints as to methods,etc I should consider...
We are currently studying recursion...if hat helps at all!
Any help at all - please?!?!? Thanks a lot!
Actual Q:
~~~~~~~~~~~~~~~~~
Write a program to compute a simple 3x3 spreadsheet containing both integers and strings. Firstly, there would be input from the user (in rows - see example below), then perform calculations on the user input as outlined below ...and finally, output the computed spreadsheet as a matrix.
Your program only needs to cater for addition/subtraction formula. Your columns (numbered A,B,C) and rows (numbered 1,2,3) will never be more than a single character and cell values/formulae have no spaces or errors. Examples of formulae are:
=A1, =A1+B1, =A1+A2-A3, =B3-C3
Sample Input
1 2 3 4 5 6 =A1+A2 =B1+B2 =C1+C2
Sample Output
1 2 3
4 5 6
5 7 9
Sample Input
Jack 12 23 Jill 45 67 Total =B1+B2 =C1+C2
Sample Output
Jack 12 23
Jill 45 67
Total 57 90
~~~~~~~~~~~~

OAM 10g - obmygroups and nested dynamic groups

I've run into an issue with the obmygroups header action in OAM 10g, and I'm not sure whether this is by design or not.
The obmygroups will return static and dynamic group names for which the user is a member, and it will return static groups that contain nested static groups where the user is a member of the nested group. However, it doesn't seem to static groups with nested dynamic groups where the user is a member of the nested dynamic group.
Is that by design? Is there any way to nest dynamic groups so that obmygroups will return the parent group name? I'd like to have a group that contains both nested static and nested dynamic groups, and have the obmygroups action return the name of the parent group.
Thanks,
Matt

Return Attribute Action in authentication or authorization rules
obmygroups:<ldap_url> special attribute returns those groups to which the user belongs that also satisfy the criteria <ldap_url> filter specifies.
EX: "obmygroups:ldap:///cn=Groups,dc=myorg,dc=com??sub(group_type=role) returns all the groups in cn=Groups,dc=myorg,dc=com tree for which the logged-in user is a member and the group_type is role.
For more information check OAM Access Administration Guide

Difference between Trunk links and port channel

Hi
Can anyone please explain me the difference between the Trunk links and Ether channel ?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As the other posters have already described, in Cisco parlance, a "trunk" is a link that carries VLAN tagged frames. (Note, Cisco has two technologies for these, ISL [old/proprietary] and IEEE 802.1Q [vendor independent].) An Etherchannel (also called a port-channel) is one logical link that includes one or more physical links. (Note, although Etherchannel can run across just one link, normally more than one link is configured. Older and most Cisco implementations support up to 8 links in one channel bundle. There's also multiple Cisco technologies that support Etherchannels, such as manual/PAgP[Cisco/old]/LACP[IEEE 802.3ad].)
Trunk links might also be configured on an Etherchannel link.

What is the difference between "Group Albums" and "Albums"

What is the difference between "Group Albums" and "Albums"

An album is a shareable object; you can add photos to an album, then subsequently share that album with someone else. It's better than sharing your whole library, and allows you to make and share lots of different related sets of photos.
Group Albums allow you to collaborate on an album with others. Both you and the collaborators can upload photos or videos, and view them in My Library. All members of the Group Album can also edit, copy, print, and download the items in the album.
Only members of Photoshop.com can participate in Group Albums. But since membership is free, you can invite nonmembers to participate in a Group Album, and they can create a Photoshop.com account and contribute files.
-Mark

Link Recipe Group counter and Operation

Hi,
I need to develop a report where selection screen will have "recipe group", "group counter" and "plant" and want to extract operation details for that group and counter.
Please tell me the table / field name where I can see Group/ Group Counter and Operation details together. (In PLPO group counter is not available and other fields like "Group of the referenced task list" and "Refer. group counter" is appearing blank; value in field "node" is not the value of "counter").
Also let me knwo the table where operation classification (KLAKZ) indicator is maintained.
I am trying to extract operation classification (class type 019) values for a recipe group and counter.
Regards,
Abir.

hi .
Please find following tables related with routing
                     MAPL                    Allocation of task lists to materials
     PLAS                    Task list - selection of operations/activities
     PLFH                    Task list - production resources/tools
     PLFL                    Task list - sequences
     PLKO                    Task list - header
     PLKZ                    Task list: main header
     PLPH                    Phases / suboperations
     PLPO                    Task list operation / activity
     PLPR                    Log collector for tasklists
     PLMZ                    Allocation of BOM - items to operations
Regards
SANIL

Difference between create database link and create shared Database link

Hi Guys,
can any one suggest me where to use "create database link" statement and where to use "Create shared database link". I have only idea that using shared database link the process can reuse connections already established to the remote server.
In my envrionment I am used to connect with db link but sometimes its not working so try with shared link and its working fine. In local as well as remote database we are using DEDICATED only not the shared server.
so, what the cause behind this?
Any suggestion?
Thanks...

Please refer to documentation:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_concepts.htm#sthref3878
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it.

I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it. All of the files are going into the same zip file but I want them visually in the space that I put them and not at the bottom of the snap to grid folder location they are looking like. I am trying to drag and drop files in groups so that I can group them for now, but image files always do their own "sort by" when I drag them from my web pages. Links don't do it though. I tried resetting the folder, and deleting the DS files. No luck.

You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
Thomas Cannon Jr.

Skew, Warp, Resize and Nest a video in Photoshop???

I would like to know how to skew, warp and resize a video inside of photoshop cs4. I would also like to know how to nest multiple video files into one file.
I am new to Photoshop, I am looking for some tutorials but unable to find any.
Thanks

Marian, thanks for the advice.
Thou I understand your point, very well about screwdriver vs hammer, that was not my question in my post. I asked a straight forward question about how to Skew, Warp, Resize and Nest a video in Photoshop. Not which is the best software to use for this task.
If you know the answer, share the knowledge, is this not what this forum is for or am I in the wrong place??? Before suggesting which tool is best for me to use, try understanding what I want to build first. This makes all the difference.
As I have already proven to myself I don’t need a new tool to accomplish the task I had at hand. If I took your advice, I and my company would have wasted money on a software that we did not need in the first place.
Understand your client needs first before giving advice. Sometimes a hammer is all it takes, if you use right.
I don’t need to study more on video production, this is not my job. All I wanted to know was how to edit a video in Photoshop.
I hope we are not off on the wrong foot because I feel I could learn a lot from you but you need to take the time to understand the question before shooting from the hip with an answer.

Problem in creating group above AND group left in one report!

Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.

hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw

"group", "link" and "nest" -- difference?

Similar Messages

Maybe you are looking for