Guest two node Failover Cluster with SAS HBA and Windows 2012 R1

Hi all, i have two IBM x3560 brand new servers with V3700 IBM Storage. The Servers are connected to the storage through four SAS HBA adabters (two HBA's on each server). I want to create a two node guest Fileserver Failover Cluster. I can present the
LUN's to the guest machines, but when i 'm running the cluster creation wizard it can't see any disk. I can see the disks on disk management console. Is there any way to achive this (the cluster creation) using my SAS HBA presented
disks, or i have to use iSCSI to present the disks to my cluster?
Thank you in advance, George
1) Update to R2 and use shared VHDX which is a better way to go. See:
Shared VHDX
http://blogs.technet.com/b/storageserver/archive/2013/11/25/shared-vhdx-files-my-favorite-new-feature-in-windows-server-2012-r2.aspx
Clustering
Options
http://blogs.technet.com/b/josebda/archive/2013/07/31/windows-server-2012-r2-storage-step-by-step-with-storage-spaces-smb-scale-out-and-shared-vhdx-virtual.aspx
2) If you want to stick with non-R2 (which is a BAD idea b/c tons of reasons) you can spawn an iSCSI target on top of your storage, make it clustered and make it provide LUs to your guest VMs. See:
iSCSI Target in Failover
http://technet.microsoft.com/en-us/library/gg232632(v=ws.10).aspx
iSCSI Target Failover Step-by-Step
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Use third-party software providing clustered storage (active-active) out-of-box.
I would strongly recommend to upgrade to R2 and use shared VHDX.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

3 Node Failover Cluster With iSCSI

Is there any information available on the steps to create a 3 node failover cluster with iSCSI storage? Is there a step-by-step guide? I looked around but couldn't find much. Thanks!

Hi SCPSTech,
The 3 node cluster create steps same with 2 node, you can refer the following step by step white paper create the 2 node cluster then add the another node to cluster.
Configuring Failover Clusters with Windows Storage Server 2008
http://blogs.technet.com/b/storageserver/archive/2009/12/17/configuring-failover-clusters-with-windows-storage-server-2008.aspx
Add a Server to a Failover Cluster
http://technet.microsoft.com/en-us/library/cc730998.aspx
More information:
Add or Remove Nodes in a SQL Server Failover Cluster (Setup)
http://msdn.microsoft.com/en-us/library/ms191545.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to make 2 Node File Cluster with SAS Disks

Hello,
I cant fine any detailed, specific information and answer on this question
I have 2 Servers, Say HP, with 4 SAS disks each, 1 for OS (2012R2Data) and 3 available.
I want to create fault tolerant SMB 3.0 share for my Hyper-v nodes, to make hyper-v FT cluster afterwards.
So, I see inr equirements that SAS disks will work, but during creating cluster, I can not manage Cluster to see disks from both servers (total 6 free units)
If it is made via ISCSi target, both servers have access to that targets and cluster sees all available through iSCSI disks, but how to mnake SAS disk available to other server?
Is it possible what I need with this configuration? is it a option to make each server iSCSI target and initiator? (but it would be way complicated and slow, I think).
so, what I have misunderstood, how to make FT file Cluster with 2 servers with SAS drives?
Any info about this SPECIFIC config would be welcomed, or any general step-by-step guides (please, do not link me guides with other config, like iscsi or with additional servers, I have seen a lot of them :()
thanks

Hello,
I cant fine any detailed, specific information and answer on this question
I have 2 Servers, Say HP, with 4 SAS disks each, 1 for OS (2012R2Data) and 3 available.
I want to create fault tolerant SMB 3.0 share for my Hyper-v nodes, to make hyper-v FT cluster afterwards.
So, I see inr equirements that SAS disks will work, but during creating cluster, I can not manage Cluster to see disks from both servers (total 6 free units)
If it is made via ISCSi target, both servers have access to that targets and cluster sees all available through iSCSI disks, but how to mnake SAS disk available to other server?
Is it possible what I need with this configuration? is it a option to make each server iSCSI target and initiator? (but it would be way complicated and slow, I think).
so, what I have misunderstood, how to make FT file Cluster with 2 servers with SAS drives?
Any info about this SPECIFIC config would be welcomed, or any general step-by-step guides (please, do not link me guides with other config, like iscsi or with additional servers, I have seen a lot of them :()
thanks
You cannot do what you want with a Microsoft built-in tools. MSFT require you to take your SAS disks away from your servers, buy a SAS JBOD (better more then one to get advantage of a so-called "enclosure awareness" and avoid single point of failure) and
configure Clustered Storage Spaces with now *external* SAS drives. See:
How to Configure a Clustered Storage Space in Windows Server 2012
http://blogs.msdn.com/b/clustering/archive/2012/06/02/10314262.aspx
Prerequisites
A minimum of three physical drives, with at least 4 gigabytes (GB) capacity each, are required to create a storage
pool in a Failover Cluster.
The clustered storage pool MUST be comprised
of Serial Attached SCSI (SAS) connected physical disks. Layering any form of storage subsystem, whether an internal RAID card or an external RAID box, regardless of being directly connected or connected via a storage fabric, is not supported.
Windows Server 2012 R2 had flexed out some limitations so now ReFS is supported (but useless as VMs cannot be integrity checked and protected) and now you can use parirty spaces (also useless as they are DOG slow with a typical VM workload dominated by small
writes, say 4KB write initiates 256KB+ parity stripe read-modify-write update). Core requirements "SAS everywhere" is still there.
So if you don't want to mess with SAS JBODs you may give a try to a virtual SAN solutions available on the market. They can cluster a pair of hosts (even with a single port SATA drives) w/o any external hardware, only Ethernet required. There are even free
options available. See:
Free Virtual SAN
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
Also Google (or Bing?) for DataCore and SteelEye as they have very similar native (Windows-based) offerings. + there's bunch of a VM-running storage doing more or less the same.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

2 Node Failover Cluster - ISCSI Disks as 1 volume?

Hi,
Not sure if I'm in the correct forum. If I am I apologize. I need some advice.
I have created a 2-node failover cluster with 2 HP Blades. I also currently have 2 NAS Servers (HP X1600 24tb servers running 2008 Storage server) -- The ultimate goal would be to combine all of the storage space from the NAS's into 1 volume addressable
by the failover cluster. (As well as disk space from any additional NAS's added in the future.)
Right now, I can add the ISCSI disk space from the NAS Targets as different volumes under cluster shared volumes. Because of the 16TB limit in the ISCSI target, I essentially have 2 ISCSI disks on each NAS. One for 16TB, and the other for 4TB (The
NAS Drives are configured for RAID 5 so there's a 4TB Loss.) So, I have 4 ISCSI disks in the cluster, each as their own volume.
Any thoughts on making the 4 drives addressable as one volume?
Regards,
-Eric

We're running Server 2012 Data Center on the cluster nodes.
I was thinking the same about the 3rd party software to do what I'd like it to do. The data is mostly security camera video from our security system. Since its not really critical data, i'm just looking for a way to maximize
the available hard drive space, and make it addressable as one volume or network share...
-Eric
You can build Storage Spaces (simple, not clustered as it would waste 50% of your capacity, MSFT can do mirror and parity with R2 for clustered only) from iSCSI LUs. Dog slow and unsupported but you'll have linear spanned space. See:
Rough Guide To Setting Up A Scale-Out File Server
http://www.aidanfinn.com/?p=13176
Creating Virtual SoFS with shared VHDX
http://www.aidanfinn.com/?p=15145
you don;t need SoFS (obviously) but in this article Aidan creates Storage Spaces from iSCSI LUNs.
Good luck!
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Network Name Resource Availability - failover cluster error 1196 on Hyper-V 2012 R2 nodes

Hello,
We're getting this error in our even logs of our four node failover cluster, we tried deleting Host A record in DNS management, that did nothing.
Failover cluster event: 1196
"Cluster network name resource 'CAUCrgt8' failed registration of one or more associated DNS name(s) for the following reason: This operation returned because the timeout period expired.
Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server."
And this resource http://technet.microsoft.com/en-us/library/cc773529%28v=WS.10%29.aspx did not help in solving this.
Do you guys have any other suggestions we could try to resolve this error?

Hi Jonas,
Please offer us which platform server you are using, such as if you are using server 2012 please refer the following update first.
Recommended hotfixes and updates for Windows Server 2012-based Failover Clusters - http://support.microsoft.com/kb/2784261
If the update not work please ppply Full Control permissions for the Cluster Name Resources in the DNS console.
More detail information please refer the following article:
Windows Server 2008 Troubleshooting: Event ID 1196 — Microsoft-Windows-FailoverClustering - http://social.technet.microsoft.com/wiki/contents/articles/windows-server-2008-troubleshooting-event-id-1196-microsoft-windows-failoverclustering.aspx
DNS Registration with the Network Name Resource -
http://blogs.msdn.com/b/clustering/archive/2009/07/17/9836756.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

2 node failover cluster power down

I have a 2node failover cluster. When I power down a node that has the SQL server instance and resources, all the resources and service failover to the other node. When I see that all the resources and service report "online" I then power
that node. I am being told that this is improper because failover may not have completed. Is that correct?
Also, in our 2 node failover cluster is there a proper sequence to restarting the powered down nodes?

Hi,
The cluster group containing SQL Server can be configured for automatic failback to the primary node when it becomes available again. By default, this is set to off.
To Configure:
Right-click the group containing SQL Server in the cluster administrator, select 'properties' then 'failback' tab.
To prevent an auto-failback, select 'Prevent Failback', to allow select 'Allow Failback' then one of the following options:
Immediately: Not recommended as it can disrupt clients
Failback between n and n1 hours: allows a controlled failback to a preferred node (if it's online) during a certain period.
The related article:
Windows Failover Clustering Overview
http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

Can I put the same information on two different i-phones with different numbers and different ID's?

Yes and no it really depends on what information you are putting on the devices.

OCS on a cluster with Load balancing and fail safe environment

Dear all,
i want to ask is there any documat or hints on how to do an OCS R2 installaiotn on 3 server with RAC option (clustered Fail Safe), how can i install OCS on a cluster with Load balancing and fail safe environment.
plz i need ur help
thanking u
[email protected]

Dear all,
i want to ask is there any documat or hints on how to do an OCS R2 installaiotn on 3 server with RAC option (clustered Fail Safe), how can i install OCS on a cluster with Load balancing and fail safe environment.
plz i need ur help
thanking u
[email protected]

What is a good wireless printer that will work with a macbook and windows laptops?

What is a good wireless printer that will work with a macbook and windows laptops?

Any printer that visibly supports OS X will work fine. My personal recommendation is Brother, followed rather distantly by Canon.
Recently I have grown to favor Brother printers over the others. They are inexpensive, their OS X integration is well-implemented, their consumables are reasonably priced, and their technical support is free forever. If you need to call them and explain that you have a Mac, you will immediately receive competent assistance.
The third and subsequent choices are so far down from those two they're not worth mentioning. I have grown to dislike HP printers, for all the above reasons.
Read user reviews from vendor websites - Amazon is a good place to start, since Amazon lets people write almost anything they want... right, wrong, or completely idiotic.
Read the reviews on the respective manufacturers' websites as well, but consider the likelihood of them deleting negative reviews.
Process all those user reviews employing your own common sense, and draw your own conclusions.
Consider AirPrint compatibility for future needs. Those features add very little to the price over a USB - only or wireless printer. Understand that not all wireless printers are AirPrint compatible - AirPrint must be specifically indicated. Choose among this list: http://support.apple.com/kb/ht4356
After OS X compatibility, the next consideration should be the cost of consumables. Laser printers are cheaper than inkjets in that regard.
Here is a list of AirPrint compatible Brother printers and multifunction devices

I have an issue with the tabs and windows disappearing....?

I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

No Issue with the voltage in general. iPad is being charged via USB.
1. If you connect it directly to the computer - no problem.
2. If you want to charge it directly from the power socket you will need this:
http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
TZ

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

Lbo51380 wrote:
cant find an itunes app for my laptop. is there something i can get that will help with this?
Go here -> http://www.apple.com/itunes/download/

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

Guest two node Failover Cluster with SAS HBA and Windows 2012 R1

Similar Messages

Maybe you are looking for