GUI browser for cmd line apps

I use Mutt and Newsbeuter, both of which are command line programs that are just so awesome. However, occasionally, people send HTML emails that are better viewed with HTML, and more often than not, RSS feeds (for Newsbeuter) are all HTML. I thought it would increase productivity by a lot if there was a fixed X window/browser in which stuff would automatically get rendered as I j/k through my emails and RSS feeds, instead of opening attachments and opening a link in a browser, switch a tag (in the tiling window manager) just to see the web page.
It sounds like this could be some kind of protocol. Does such a thing exist, for certain apps to render HTML or URLs in pre-existing windows/browsers? If not, I'd think of implementing some kind of daemon and a hack on Mutt and Newsbeuter.
Thanks.

Most browsers can be "remote controlled" to some extent. For example:
#! /bin/sh
export DISPLAY=:0.0
opera --remote "openURL($1, background-page)"
is a little script I use to take advantage of my existing Opera session. This lets me open webpages from the console or even remote ssh shells.
Last edited by keenerd (2010-01-22 04:04:47)

Similar Messages

Disable directory browse for /Reports virtual app in SSRS 2014?

How do you disable directory browse for /Reports in SSRS 2014? Currently the user can http://devreports.foo.com/ReportServer/ and view all virtual folders. Need to disable this. Using FormsAuth / CustomAuth.
thanks
scott

Hi scott,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

ITunes files missing in Media Browser for all other apps

I've read many and posted a couple times about this issue, but new information has come to light, so I figured I'd give it one more shot.
Somewhere along the line from migrating from 2007 MacBook to my newer 2010 iMac, I've lost the ability to see my iTunes files in other apps in the media browser. This is very specific to the user that my main library (237gb). I've got a separate library on a different user account, no issues there. It happens in all of the iLife apps(like trying to add music to a slideshow), iWork apps (clicking on media), Mail (attaching a .mp3). Oddly enough, Audacity has no issue seeing the iTunes files. I've tried several solutions, including re-installing the Media Browser, and trashing the .xml file (Apple's own solution found here). Nothing worked. I had hoped the release of Lion might fix the problem, and I upgraded "the Apple way." The problem persisted.
I had thought perhaps the issue lied from carring over old code, apps, or whatever from the migration. I had hoped doing a clean install of Lion might do the trick. I finally got an external to move the library too, and do a very manual migration. Copied all documents and media to the external, boot from the Lion Boot CD I created before upgrading the 1st time, reformat drive, install Lion. It went off without a hitch. I made sure to copy all of the database files (.xml, .itl), and while all of my settings, playlists, and play counts were preserved (something that is important to me), the same problem reared it's head.
Another idea came was to start a new user account, and just use the media files, and not the database files. After simply dragging the media folder into iTunes and copying the files (the drobo has plenty of space), it worked perfectly. Except I had lost all of my play counts, settings, and playlists.
So the question is, is there a solution to fix the old user account, or is there a way to rebuild what I've lost in the new user account? I'm using completely updates software in Lion, iLife, iTunes, iWork, etc.

Turns out my "iTunes Library.itl" file was corrupt. I used the old "iTunes Music Library.xml" file to rebuild a new library with existing playlists and play counts. Though that didn't go off completely without a hitch, I did find this solution. Problem solved.

Any kind of gui/browser for javacards available?

I've got the JavaCard documentation...but it's a tad verbose. Nothing to come up to speed quickly...if that's even possible.
The iButton has a IB-IDE for browsing iButton javacards...any such gui (java or otherwise) for java smartcards?
For now and the immediate future, all I really want on the thing is the ability to store a pin/id for authentication.
I am planning a home automation/security system for the home/small business that allows access via either keypads, iButton, or javacard. So there's no web authentication reqt's, just the ability to read the default? pin from a javacard.
Could I be pointed to any relevant samples for speeding up this process?
Correct me if I'm wrong, but I guess I'll have to create an applet for the javacard with this pin#. The iButton's are nice in that they by default have a serial# associated with the ibutton itself.
thanks.

All the browser would show you is the AIDs. Theres no filesystem on the card like the proprietary file-system cards. Only in a closed environment/deployment, a portal, would you be able to "explore" the contents of applets.

1142N unable to open Web GUI and CMD line options not available

I am currently trying to configure two 1142N APs (AIR-LAP1142N-A-K9) to be stand alone APs. I have followed the PDFs
http://www.cisco.com/en/US/customer/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38frst.html#wp1103248
and
http://www.cisco.com/en/US/customer/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32frst.html#wp1103310
I set up the switch to provide DHCP and confirmed that each AP is indeed assigned an IP address. I can also ping each device. However when trying to browse to the GUI it fails to connect. So I tried to configure it via the CMD line. The enable mode does not give the option to configure interfaces as you would expect in enable mode nor does it give the option to enter global exec. example of the out put below.
AP8843.e178.0ee0>
AP8843.e178.0ee0>enable
Password:
AP8843.e178.0ee0#?
Exec commands:
cd               Change current directory
clear            Reset functions
clock            Manage the system clock
crypto           Encryption related commands.
debug            Debugging functions (see also 'undebug')
delete           Delete a file
dir              List files on a filesystem
disable          Turn off privileged commands
enable           Turn on privileged commands
exit             Exit from the EXEC
fsck             Fsck a filesystem
help             Description of the interactive help system
led              LED functions
lock             Lock the terminal
login            Log in as a particular user
logout           Exit from the EXEC
lwapp            lwapp exec commands
mkdir            Create new directory
monitor          Monitoring different system events
more             Display the contents of a file
name-connection Name an existing network connection
no               Disable debugging functions
ping             Send echo messages
pwd              Display current working directory
release          Release a resource
reload           Halt and perform a cold restart
rename           Rename a file
renew            Renew a resource
rmdir            Remove existing directory
send             Send a message to other tty lines
set              Set system parameter (not config)
show             Show running system information
systat           Display information about terminal lines
terminal         Set terminal line parameters
test             Test subsystems, memory, and interfaces
traceroute       Trace route to destination
undebug          Disable debugging functions (see also 'debug')
upgrade          Upgrade software
verify           Verify a file
where            List active connections
It seems that the IOS on this device does not have the capability to configure the AP as stand alone or that it has been disabled. How do I get into the CMD line to configure the AP for deployment?
Secondly since I could not configure it via the CMD line I attempted to connect to it via the GUI like I said above. This fails. I ran an NMAP to find out what is open and found that nothing but port 23 is open. What is the deal here? Is the web GUI shut off by default? Am I just totally missing something? I think I dies a little inside after this...help please?

AP8843.e178.0ee0#sh ver
Cisco IOS Software, C1140 Software (C1140-RCVK9W8-M), Version 12.4(18a)JA, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 21-Nov-08 01:28 by prod_rel_team
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(18a)JA3, RELEASE SOFTWARE (fc1)
AP8843.e178.0ee0 uptime is 2 hours, 16 minutes
System returned to ROM by power-on
System image file is "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1142N-A-K9    (PowerPC405ex) processor (revision B0) with 98294K/32768K bytes of memory.
Processor board ID
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 3.0.51.0
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address:
Part Number                          :
PCA Assembly Number                  :
PCA Revision Number                  : A0
PCB Serial Number                    :
Top Assembly Part Number             :
Top Assembly Serial Number           :
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1142N-A-K9
Configuration register is 0xF

FMS URL - Case Sensitive? (GUI & Cmd Line)

I'm stuck. My FME 2.5 GUI runs fine, passes video & audio
traffic just like its supposed to. However, when running FME via
command line, FME connects to FMS alright, and uploads A/V to the
server, but I can't view the output. The ONLY difference is that my
FMS server side app name is ALL CAPS. In GUI mode, the app displays
in CAPS.
The Startup XML file displays CAPS, .......but......when
running FMEcmd, the console window displays LWR CASE letters for
the application.
Example:
GUI FMS URL = rtmp://xxxxx.server.com:80/BUS1/xxxxxxx
FMECMD via CMD Line = rtmp://xxxxx.server.com:80/bus1/xxxxxxx
Startup XML File = rtmp://xxxxx.server.com:80/BUS1/xxxxxx
Is there someway that I can change that XML file in Notepad
so that it forces ALL CAPS for that application name?

I guess you will have this issue with FMEcmd anyways. I am
hoping this issue will be fixed in next release of FME.

What are the netsh cmd line for windows server 2008,2012 ?

Hi
I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
Before Netsh cmd support for all os including Win 8,win 8.1.
I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
This is my code in asp.net using vb
Dim pip As New Process()
Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
pip.StartInfo = pipa
pip.StartInfo.UseShellExecute = False
pip.StartInfo.RedirectStandardOutput = True
pip.Start()
pip.WaitForExit()
And if change ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
I can change ip,subnet,gateway,both dns is some other way,below is the link
http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
Pls reply asap
Regards
Aravind

For the shell scripting I'd try them here.
Scripting forum on MSDN
Scripting Guys forum on TechNet
For the asp.net I'd ask over here.
Microsoft ASP.Net forums
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Is there a way to hide apps from the app store? I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps! I can hide them from "purchased apps", but they still show up when browsing for new apps!

Is there a way to hide apps from the app store?
I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps!
I can hide them from "purchased apps", but they still show up when browsing for new apps!
Is there a way to hide them so that my kids will never see them when looking for new apps?

Not other than parental oversight. On the computer you can implement Parental Controls on a separate user account that they would use. You can then block certain websites. But you cannot do that on the iPad.
You could change your iTunes account such that they cannot access it in order to buy or download apps.

How to restrict separate payment document for each line item in APP

HI Experts
PLs let me know how to restrict separate payment document for each line item in APP
Thanks
Sneha
Edited by: Sneha R on Apr 14, 2009 4:18 PM

Sneha,
If your query was to group items for payment ,in FBZP co code data for payment method there are 2 options 1.group payment for marked items 2.payment per due date.
Also in the Vendor master there is a flag which will ensure that each item is paid individually,if this is what you were looking for ( FK02 change vendor).
In case you want to group items to be paid together Payment Grouping Key can be assigned in Vendor Master .
Shony

Cmd-line client for web service

Hi there,
I'm new to Sun Java Studio, but generally familiar with the technology. So far I managed to build a web service and to register it.
Now I would like to build a simple cmd-line client to invoke this web services. I couldn't find anything in the "documentation" or "tutorial". Does anybody has some sample code?
Thanks,
Andreas

The tutorial http://www.netbeans.org/kb/50/quickstart-webservice-client.html provides a sample for developing a standalone client that consumes a webservice.
The tutorial is for NetBeans 5.0 (http://www.netbeans.info/downloads/download.php?type=5.0) but should be applicable for JSE8 (based on NB4.1).

Gui tool for browsing environments

Does anyone know of a good, preferably free, gui tool for browsing environments and performing queries on them?

Hi,
I am aware of oXygen and Stylus Studio.
Ron

I didn't receive coin for Line App from my last purchasing.

I didn't receive coin for Line App from my last purchasing.
How should I have to do?
Please advise.
Thank you.
Best Regards,
Phansak P.

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I can't use Safari as my browser for an on-line training seminar. What other browser can I use and how do I get it?

I can't use Safari as my browser for an on-line training program. What other browser can I use and how do I get it?

Web Browsers for Mac OS X
Pure Mac: Web Browsers
Web Browsers for the Mac
Download the browsers from their website.

Flo – A command line app for organizing events, to-dos, and deadlines

Example
$ flo watch movie,d020
Ids are updated.
$ flo eat lunch,d11100-d11130
Ids are updated.
$ flo
0 08-16 20:00 d0 watch movie
1 08-17 11:00 d1 eat lunch
11:30 d1
Usage
flo [-a] [-c id] [-f from] [-r id] [-t to] [-w what] [what[,from][-to]]
Options
-a all items
-c id change item
-f from from date
-r id remove item
-t to to date
-w what
When changing an item, setting -f or -t to r removes the field.
Date formats
YYYYMMDDhhmm, MMDDhhmm, DDhhmm, DDhh, and DD are the valid date
formats. Replace DD with dn to set the date n days from today's date.
If the year or the month isn't specified, the current year and month is used.
For formats without a month, if the date specified is before today's date, the
month is set to the next month.
The value for hours and minutes is set to 00 if no other value is specified.
flo runs fast since it's written in C, and the goal is to keep it as simple as possible. It uses between 1–2 milliseconds to start when it's cached by the OS.
The package is named flo-git in AUR. The development happens on GitHub.
Last edited by alexanderte (2010-08-22 10:50:05)

alexanderte wrote:
Installation
git clone git://github.com/alexanderte/flo.git
cd flo
make
cp flo /usr/local/bin/
# optional
echo "alias f='flo'" >> ~/.bashrc
You should always use Pacman to install packages on Arch. Here's a PKGBUILD:
# Contributor: Xyne
pkgname=flo-git
pkgver=1
pkgrel=1
pkgdesc="A command line app for organizing events, to-dos, and deadlines."
arch=('i686' 'x86_64')
url="http://github.com/alexanderte/flo"
license=('ISC')
makedepends=('git')
provides=('flo')
conflicts=('flo')
_gitroot="git://github.com/alexanderte/flo.git"
_gitname="flo"
build() {
cd "$srcdir"
if [ -d "$_gitname" ] ; then
cd "$_gitname" && git pull origin
else
git clone "$_gitroot" "$_gitname"
cd "$_gitname"
fi
make
install -Dm755 flo "${pkgdir}/usr/bin/flo"
You can learn more about PKGBUILDs in the wiki: http://wiki.archlinux.org/index.php/PKGBUILD
I recommend that you upload it to the AUR as well, with any changes that you deem necessary. Don't forget to add yourself as the maintainer at the top of the file.

.bar for LINE app

does anyone have a functional .bar file for LINE app that support video as well? i cannot seem to find it.

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

GUI browser for cmd line apps

Similar Messages

Maybe you are looking for