GUI_DOWNLOAD fn module text allignment problem

Hi
I have a problem while downloading data from internal table to presentation server filepath using GUI_DOWNLOAD fn module.
For me the requirement is to display each field data at a fixed location in a DAT file (notepad) for all lines irrespective of any delimiter.
Now data of ech field is getting displayed continuously after its preceeding field with the specified delimiter. I want to fix the location of each field at a particular point for all lines in the file after download.
Is there any other fn module for this or any change in the parameters for fixing the field positions in the output file ?
Harsha

Hi Vinod
I have tried your way solution also. Still my problem is not solved.
Present Output:
test test     E12EDWQD     0000110.000
venky kirupa test case- final se     87549-8655-9     0000110.000
Vetri Velan     SAFETWT     0000961.540
Amount fieilds(last field) of each line need to be alligned one below the other starting from same position in all lines. At present its all random based on the length of previous field.
Harsha.

Similar Messages

GUI_Download funtion module problem

HI All,
I am Using GUI_Download funtion module for downloading data from internal table to flat file. But one of the field is having the value ОАО "САН Интербрю Украина"
After downloading data, the letters are being replaced by # in the download.
If any one know please let me as early as possible.
Thanks in advance.....
Satish

Check the sap documentation for the funtion module(Especially for CODE page)
Character Representation for Output
Description
Use parameter CODEPAGE to specify the desired target codepage. If this
    parameter is not set, the codepage of the SAP GUI is used as the target
    codepage.
Value range
4-digit number of the SAP codepage. Function module
    SCP_CODEPAGE_BY_EXTERNAL_NAME returns the SAP codepage number for an
    external character set name such as "iso-8859-1". Function module
    NLS_GET_FRONTEND_CP returns the related non-Unicode frontend codepage
    for a language.
You can specify the desired codepage interactively, if the parameter
    with_encoding of method file_save_dialog is set by
    cl_gui_frontend_services.
SPACE: Codepage of the frontend operating system.
Regards,
Ravi

Issue with filename in gui_download fn module

Hi,
i have an issue with the filename of text file that was dowloaded using gui_download fn module.
PARAMETERS : p_file TYPE rlgrap-filename.
CONCATENATE s_laufd-low6(2) s_laufd-low4(2) INTO gv_dt.
CONCATENATE 'HINL' gv_dt '.001' INTO p_file.
START-OF-SELECTION.
DATA: v_file TYPE string.
v_file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = v_file
      filetype                = 'ASC'
      append                  = 'X'
    TABLES
      data_tab                = it_tab[]
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
data is downloaded into the textfile with filename as HINL2411 truncating the decimal part.
How can i get the filename along with the decimal part as HINL2411.001.
Thanks

Hi ,
Declare p_file as TYPE string

Issue with gui_download function module

Hi All,
         I have an issue with gui_download function module that it is creating one extra line while downloading my internal table data into text file,which i donot want.i have searched for various threads but couldnot get the proper reply.Or please provide me some other Function Module which will not create one extra line.Please help.

part 2
INCLUDE RPPPXD00.
DATA : BEGIN OF COMMON PART A.
INCLUDE RPPPXD10.
DATA : END OF COMMON PART.
INCLUDE PC2RXTW0.
INCLUDE RPC2RX00.
DATA : BEGIN OF COMMON PART B.
INCLUDE RPC2CD00.
DATA : END OF COMMON PART.
INCLUDE RPPPXM00.
INCLUDE RPCMGR00.
AT SELECTION-SCREEN OUTPUT.
CONCATENATE SY-DATUM2(6) SY-UZEIT0(4) INTO REF_NO.
LOOP AT SCREEN.
    IF R1 = 'X'.
      IF SCREEN-NAME = 'FLN' OR SCREEN-NAME = '%_FLN_%_APP_%-TEXT' OR
         SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT' OR
        SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT'"SOC BY ANKITA"
       OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
       OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
       OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
       OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
       OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
       OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R2 = 'X'.
      IF SCREEN-NAME = 'FLN' OR SCREEN-NAME = '%_FLN_%_APP_%-TEXT' OR
         SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT' OR
         SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT' "SOC BY ANKITA
         OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
         OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
         OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
         OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
         OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
         OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R3 = 'X'.
      IF SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'PY_DT' OR SCREEN-NAME = '%_PY_DT_%_APP_%-TEXT' "SOC BY ANKITA
        OR SCREEN-NAME = 'ORG_ID' OR SCREEN-NAME = '%_ORG_ID_%_APP_%-TEXT'
        OR SCREEN-NAME = 'ORG_AC' OR SCREEN-NAME = '%_ORG_AC_%_APP_%-TEXT'
        OR SCREEN-NAME = 'REF_NO' OR SCREEN-NAME = '%_REF_NO_%_APP_%-TEXT'
        OR SCREEN-NAME = 'DEPT_CD' OR SCREEN-NAME = '%_DEPT_CD_%_APP_%-TEXT'
        OR SCREEN-NAME = 'PRS_BNK' OR SCREEN-NAME = '%_PRS_BNK_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_TY' OR SCREEN-NAME = '%_TRANS_TY_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_ID' OR SCREEN-NAME = '%_TRANS_ID_%_APP_%-TEXT'
        OR SCREEN-NAME = 'TRANS_RK' OR SCREEN-NAME = '%_TRANS_RK_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    IF R4 = 'X'.
      IF SCREEN-NAME = 'PREPBY' OR SCREEN-NAME = '%_PREPBY_%_APP_%-TEXT'"SOC BY ANKITA
         OR SCREEN-NAME = 'APROBY' OR SCREEN-NAME = '%_APROBY_%_APP_%-TEXT'
         OR SCREEN-NAME = 'BTC' OR SCREEN-NAME = '%_BTC_%_APP_%-TEXT'."EOC BY ANKITA
        SCREEN-ACTIVE = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
START-OF-SELECTION.
SELECT SINGLE * FROM T549Q WHERE PERMO = '01'
                             AND   PABRJ = PRD+0(4)
                             AND   PABRP = PRD+4(2).
FR_DT = T549Q-BEGDA.
TO_DT = T549Q-ENDDA.
CONCATENATE FR_DT0(4) FR_DT4(2) INTO FR_P.
CONCATENATE TO_DT0(4) TO_DT4(2) INTO TO_P.
PN-PAPER = PRD.
PN-PERMO = '01'.
GET PERNR.
RP-PROVIDE-FROM-LAST P0003 SPACE PN-BEGDA PN-ENDDA.
RP_PROVIDE_FROM_LAST P0001 SPACE PN-BEGDA PN-ENDDA.
IF PNP-SW-FOUND EQ 1.
   SN = SN + 1.
   ITAB1-SNO = SN.
   ITCC-SNO = SN.
    ITAB1-ENO = PERNR-PERNR.
    ITAB1-NAM = PERNR-ENAME.
ELSE.
    REJECT.
ENDIF.
RP-INIT-BUFFER.
RP-SEL-CALC.
CALL FUNCTION 'RP_EVALUATION_PERIODS'
    EXPORTING
      LAST_CALCULATED_DAY = P0003-ABRDT
      LAST_DAY_IN_PERIOD = TO_DT
      RETROCALCULATED_DAY = RP-SEL-CALC-RRDAT
    TABLES
      DIR                 = RGDIR
      EVP                 = EVP
    EXCEPTIONS
      RGDIR_EMPTY         = 1
      INTERNAL_ERROR      = 2
      OTHERS              = 3.
DESCRIBE TABLE EVP LINES LIN.
IF LIN > 0.
    LOOP AT EVP.
      IF EVP-IAPER = TO_P AND EVP-PAPER = TO_P.
        RX-KEY-PERNR = PERNR-PERNR.
        UNPACK EVP-SEQNR TO RX-KEY-SEQNO.
        RP-IMP-C2-TN.
        READ TABLE BT INDEX 1.
        READ TABLE WPBP INDEX 1.
        READ TABLE TAX INDEX 1."CHANGES BY ANKITA
        ITAB1-BAC = BT-BANKN.
        ITAB1-BKEY = BT-BANKL .
        ITAB1-DEP = WPBP-KOSTL.
        ITAB1-BETRG = BT-BETRG."CHANGES BY ANKITA
        ITAB1-TAXID = TAX-TAXID."CHANGES BY ANKITA
        YEAR = VERSC-PAYDT+0(4) - 11.
        MONTH = VERSC-PAYDT+4(2).
        DAY = VERSC-PAYDT+6(2).
        CONCATENATE YEAR MONTH DAY INTO ITAB1-PDT.
       ITAB1-PDT = VERSC-PAYDT - 110000.
        ITCC-DEP = WPBP-KOSTL.
        LOOP AT RT WHERE LGART = '/559'.
          ITAB1-BTFR = RT-BETRG.
          ITCC-BTFR = RT-BETRG.
         IF EVP-SRTZA = 'P'.
           ITAB1-BTFR = ITAB1-BTFR - RT-BETRG.
         ELSE.
           ITAB1-BTFR = ITAB1-BTFR + RT-BETRG.
         ENDIF.
        ENDLOOP.
      ENDIF.
    ENDLOOP.
ENDIF.
APPEND: ITAB1, ITCC.
CLEAR: ITAB1, ITCC.
END-OF-SELECTION.
CONCATENATE 'Prepared By:' ` ` PREPBY INTO PREPBY.
CONCATENATE 'Approved By:' ` ` APROBY INTO APROBY.
IF R1 = 'X'.
    FORMAT COLOR 2.
    ULINE (127).
    NEW-LINE.
    WRITE: 2 'Sr No.', 10 'Emp Num', 27 'Name'.
    WRITE: 57 'Department'.
    WRITE: 72 ' Transfer Amount' RIGHT-JUSTIFIED.
    WRITE: 92 'Bank Key', 107 'Bank AC. Number'.
    WRITE:1 '|', 8 '|', 25 '|', 55 '|', 70 '|', 90 '|', 105 '|', 127 '|'.
    NEW-LINE.
    ULINE (127).
    NEW-LINE.
    FORMAT COLOR OFF.
    LOOP AT ITAB1.
      SN = SY-TABIX.
      WRITE: 2 SN, 10 ITAB1-ENO, 27 ITAB1-NAM.
      WRITE: 57 ITAB1-DEP.
      WRITE: 72 ITAB1-BTFR.
      WRITE: 92 ITAB1-BKEY, 107 ITAB1-BAC.
      WRITE: 1 '|', 8 '|', 25 '|', 55 '|', 70 '|', 90 '|', 105 '|', 127 '|'.
      ULINE (127).
      NEW-LINE.
    ENDLOOP.
    SKIP 4.
    ULINE 90(32).
    NEW-LINE.
    WRITE: 90 PREPBY.
    SKIP 4.
    ULINE 90(32).
    NEW-LINE.
    WRITE: 90 APROBY.
ENDIF.
IF R2 = 'X'.
    LOOP AT ITCC.
      COLLECT ITCC INTO ITCOL.
    ENDLOOP.
    FORMAT COLOR 2.
    ULINE (44).
    NEW-LINE.
    WRITE:2 'Sr No.', 9 'Department'.
    WRITE: 27 'Transfer Amount ' RIGHT-JUSTIFIED.
    WRITE:1 '|', 8 '|', 25 '|', 44 '|'.
    NEW-LINE.
    ULINE (44).
    NEW-LINE.
    FORMAT COLOR OFF.
    LOOP AT ITCOL.
      SN = SY-TABIX.
      WRITE: 2 SN, 9 ITCOL-DEP, 27 ITCOL-BTFR.
      WRITE:1 '|', 8 '|', 25 '|', 44 '|'.
      NEW-LINE.
      ULINE (44).
      NEW-LINE.
    ENDLOOP.
ENDIF.
IF R3 = 'X'.
    LOOP AT ITAB1.
      CLEAR: ITTF, P3, P11, P13, P6, V_BAC.
      LEN = STRLEN( ITAB1-BKEY ).
      IF LEN < 3.
        CONCATENATE ITAB1-BKEY '***' INTO P3.
      ELSE.
      LEN = LEN - 3.
        LEN = 3.
        P3 = ITAB1-BKEY+LEN(3).
      ENDIF.
      CLEAR LEN.
      V_BAC = ITAB1-BAC.
      REPLACE ALL OCCURRENCES OF '-' IN ITAB1-BAC WITH ''.
      CONDENSE ITAB1-BAC NO-GAPS.
      LEN = STRLEN( ITAB1-BAC )."if length of acc num > limit
      IF LEN > 11.
        IT_FAIL-EN = ITAB1-ENO.
        IT_FAIL-BA = V_BAC.
        APPEND IT_FAIL.
        CLEAR: IT_FAIL.
        CONTINUE.
      ENDIF.
      P11 = ITAB1-BAC.
      CONCATENATE P11 '***********' INTO P11.
above step is for putting '' in place of unfilled chars of P11.
      P13 = ITAB1-BTFR * 100.
      P6 = ITAB1-PDT+2(6).
      CONCATENATE ` ` P3 P11 BTC P13 P6 INTO STR.
      ITTF-ROW = STR.
      APPEND ITTF.
    ENDLOOP.
    IF ITTF[] IS NOT INITIAL.
      CONCATENATE FLN SY-DATUM SY-UZEIT '.txt' INTO FILEPATH.
      CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME                        = FILEPATH
        FILETYPE                        = 'ASC'
     WRITE_FIELD_SEPARATOR           = 'X'
        TABLES
        DATA_TAB                        = ITTF
     OTHERS                          = 22
      SKIP 2.
      IF SY-SUBRC <> 0.
        WRITE:/ 'Unable to Download file at ', FILEPATH.
      ELSE.
        WRITE:/ 'File with following data downloaded at ', FILEPATH.
        NEW-LINE.
        SKIP 2.
        LOOP AT ITTF.
          WRITE:/ ITTF.
        ENDLOOP.
      ENDIF.
    ELSE.
      WRITE 'No Data, no file was downloaded'.
    ENDIF.
    IF IT_FAIL[] IS NOT INITIAL.
      SKIP 2.
      FORMAT COLOR 2.
      WRITE 'Acc. No. of following employees exceeded the length limit'.
      WRITE:/ 'So their entry was not created in the file'.
      SKIP 1.
      WRITE : 'Employee Number', 20 'Bank Acc. No.'.
      FORMAT COLOR OFF.
      LOOP AT IT_FAIL.
        NEW-LINE.
        WRITE : IT_FAIL-EN, 20 IT_FAIL-BA.
      ENDLOOP.
    ENDIF.
ENDIF.
IF R4 = 'X'."CHANGES BY ANKITA
    WRITE:/ 'ERROR LOG - BANK A/C NO. CONTAINS ALPHANUMERIC'.
    WRITE:/ 'EMPID' COLOR COL_POSITIVE,12 '|',15 'Receiving Bank Code' COLOR COL_POSITIVE,
                                                                  40 '|','Receiver A/C No' COLOR COL_POSITIVE.
    PERFORM EXTRACT_DATA.
    SKIP 2.
ENDIF."EOC
RP-READ-PAYROLL-DIR.
Edited by: ANKITA BHARDWAJ on Dec 9, 2009 10:36 AM

Text box problem or question

I'm having the text field problem. I have two text boxes (inside my .fla file) one i can add more text without the box expanding and can then select the text and croll down to view the missing text and the other one just gets longer the more text I add. I'm trying to duplicate the text box that does not expand the more text I add to it.
All the settings in the properties are the same on both and I've tried it in MX and CS3 and the both have the same properties in both.
I'm stumped can anyone help.
I'm attaching the file.
Thanks!

If you right click the textfield on the stage you can select the "scrollable" option for it. Another option to duplicate the textfield is to copy/paste it.

Question on the known solution to the "Three pixel text jog" problem

Hello,
I'm "browser-checking" my website using Dreamweaver CS4 tool for that. I've got in various places the "three pixel text jog" IE problem. I followed the link to solution proposed by DW. It says I should add an IE conditional statement in the <head> part, so that I can define the CSS zoom property for that particular element. Hence, something like that:

(assuming the problem occurs for a <p> inside my #Content div.)
My question is: can I replace this by

For another browser problem (prevent the browsers from using some of their own default settings), it was advised to reset the margin, padding and border properties using:
   border: 0;
   margin: 0;
   padding: 0;
(although in my case I had to later remove border: 0; because it would prevent default buttons of forms to be displayed as buttons.)
Does this * really mean "anything"? Is it valid as used above for fixing the three pixel text jog problem? If not, do I really have to define this zoom property for any single HTML element for which it occurs? (It currently occurs for some headers, <div>, "<div> <div>" sequence, some <p>.)
Any comment welcome...
Emilie
P.S.: I tried it and DW doesn't flag that problem any more, but I'm unsure how much I can trust it.

The behavior is unexpected. The file paths are
correct?

Heading during downloading into local file using GUI_DOWNLOAD fun.module

Hi Guru's
we have a requirement that we want the plant description as a heading (first line of the file) in the local file. iam using "GUI_DOWNLOAD" function module for downloading data for which iam passing the charecter type internal table. before downloading iam passing all the filed headings to that table and then appending the internal table data into it. now iam getting data properly with field headings . but before that heading i want one more description for a plant field which iam using in my selection screen
in the fun.module "GUI_DOWNLAOD"
we have HEADER file but it is of XSTRING type so it is taking only 2 char.
so how to use this . Plz help me.
thanks well in advance.
UR's
GSANA

Hi,
Please check the below link,
header in 'gui_download'
Also check Manoj kumar's reply in the link,
header information to gui_download
Hope this helps.
Best Regards.

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J

Font / text edit problem in photoshop CS6

Hi there,
I have a strange text edit problem in Photoshop CS6 running on Mavericks.
Every time I use the text-tool in PS, write a sentence, mark it and change something like color, font size etc., the marked text vanishes.
I have to "undo" the last step and the changed text appears again.
Every time!
I have a clean installed CS6 with no plugins and no other than system fonts installed.
Everything on a new Mac Pro with OS X 10.9.5
Any clues? Thanks.

Do you have the latest updates for photoshop cs6?
You can use Help>Updates from within photoshop cs6 to check if there are any available.
Also, if you go to Help>System Info from within photoshop cs6, you can see the Photoshop Version in the top line.
You should be on version 13.0.6
See if turning off Dictation solves the issue.
Go to System Preferences ---> Dictation and Speech -----> select OFF radio button .

Taking print out allignment problem(urgent)

Dear all,
I am faching an allignment problem while taking printout,i didnt face this problem before , i didnt able to find solution for this problem so anybody help me to solve this problem .
and also give me the solution why this problem arise.
thanks & regards,
Hari Baskar.I

Hi friend,
There must be some problem in printer settings
or
Try reducing the size of the box and see because of the size also printer may avoid the boxes.
Just try these both i think either one of the both must be a problem.
Still did not get the desired output please revert back to me. I will help you.
Thanks,
Sri Hari

A question about text allignment in the Keynote app for iOS

Hello,
I'm just wondering if there's an issue with text allignment in the Keynote app when trying to export to iTunes as a .ppt file and it is written in the Arabic language?For I have this issue in the pages app, it happens when I try to export the file to my PC as a .doc file. Is it also In keynote?
I really need an answer as soon as possible; because I have presentation that I need to finish tomorrow!
Thank you for your time. :)

nayef_96 wrote:
But what app would you recommend?
There are a lot on the app store and I don't know wich one is the best for arabic
Sorry, I don't know, perhaps someone else has tested them. I would recommend you make your presentation on real computer using PowerPoint.

N96 text sending problem pls help!

Hi, i have a nokia N96, on friday it just stopped sending my texts,
the problem started as i was texting my friend as normal, then she replied saying she had got the same msg 8 times! since then all my texts have got stuck in my outbox!
whats going on?
I have backed up my contacts incase i need to restore the phone but i want to avoid doing that if possible as i dont want to loose my photos and music (unless someone can tell me how to back those up too!)
Can anyone offer any advise, other than chuck it accross the room?!
Oh and also, i have 2 multimedia msg in my inbox that wont delete! could this be causing the problem? When i try to delete it says "already in use" where? i cant find them!
thanks
xXx
Kudos! Thanks!
Edit Post Subscribe to This Topic's RSS Feed Highlight This Post Print This Post E-Mail this Post to a Friend Report Abuse to a Moderator
Options

I have had a similar problem on my 5700, started out the same, people saying my text was coming trhough 3 or 4 times, then it stopped sending. I checked the message centre phone number with my provider, which was correct, and then it would not let me into the the message centre to even edit the number?? I have tried a factory reset and a firmware update. Does anyone else have any ideas??

Text overlapping problem

Since I upgraded to 10.4.10, I dont know if I did something wrong but I have bad text overlapping problems in Safari and some other apps such as Software Update, I first noticed the overlapping when editing a Wikipedia article and in the text box the text kept overlapping. Another site where it is very noticeable is in Facebook, here's a screenshot:
Even on this site it's pretty bad. It's the worst in text-boxes like in the one I'm typing in right now.
This is driving me crazy, anyone else have this problem or know how to fix it? Thanks.
Message was edited by: Johnny K.

Ok, Johnny --
I hated to ask cause it's "Old School."
If you shut down your Mac every night,
you should have something on your Mac that will run cron scripts,
and do other helpful things for you.
I personally use YASU.
I run it about 1x month.
It's free or donation-ware
it's written just for Macs
and is excellent.
Here's where to go for more info on it:
http://jimmitchell.org/projects/yasu/
The new Macs were built to stay on 24/7.
When you shut them off at night, you stop the regular
maintenance it already has scheduled. YASU (or similar apps)
will take care of everything for you.

Problème avec le module "Texte Analyse" dans Premier et Prelude CC

Bonjour,
j'utilise Prelude CC et Premier pro CC, et souhaite faire fonctionner correctement le module "Texte Analyse" dans Script Adobe Story incorporé. J'ai téléchargé l'extension pour la langue française, et je l'ai installée dans les deux logiciels, mais malgré redémarrage du logiciel, j'ai uniquement accès à la version anglaise.
Merci pour vos aides.
Christoph sur MAC

Bonjour,
encore merci pour votre aide, vous trouverez ci-joint une copie d'écran de mon dossier "Bibliothèque", pourtant je ne trouve pas les emplacements indiqués :
->/bibliothèque/Application Support/Adobe/....mais aucun dossier qui se nomme "SpeechAnalysisModels/CS6" ni "SpeechAnalysisModels/4.0"
> joint une copie d'écran
merci pour votre coup de main
Christoph

Module Pool Text Editor Problem

Hi
I have developed module pool program which has 3 tab strips. In the last (3rd) Tab Strip I need to input Long Text. I have the done the coding but when I go to the Last tab and then come back to any other tabs, the text editor is overwriting the other fields in the other tabs. Can any tell how to solve this problem
This is he code I have written
****90000******Screen
PROCESS BEFORE OUTPUT.
MODULE status_9000.
MODULE modify_screen9000.
module test_me.
LOOP AT t_operation INTO s_operation WITH CONTROL toperation.
    MODULE move_data.
    MODULE modiy_screentblctrl.
ENDLOOP.
CALL SUBSCREEN sub1 INCLUDING sy-repid '9001'.
CALL SUBSCREEN sub2 INCLUDING sy-repid '9002'.
CALL SUBSCREEN sub3 INCLUDING sy-repid '9003'.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CHAIN.
    FIELD zaodheader-heatnum MODULE check_heatnumber.
ENDCHAIN.
LOOP AT t_operation.
    MODULE update_itab.
ENDLOOP.
MODULE user_command_9000.
CALL SUBSCREEN sub1.
CALL SUBSCREEN sub2.
CALL SUBSCREEN sub3.
**************9003*****
PROCESS BEFORE OUTPUT.
MODULE STATUS_9003.
MODULE display_texteditor.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_9003.
**************9003*****
DATA : ccont TYPE REF TO cl_gui_custom_container,
       tedit TYPE REF TO cl_gui_textedit.
MODULE display_texteditor OUTPUT.
CREATE OBJECT ccont
EXPORTING
parent =
container_name = 'CC'
style =
lifetime = lifetime_default
repid =
dynnr =
no_autodef_progid_dynnr =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6 .
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT tedit
EXPORTING
max_number_chars =
style = 0
wordwrap_mode = wordwrap_at_windowborder
wordwrap_position = -1
wordwrap_to_linebreak_mode = false
filedrop_mode = dropfile_event_off
parent = ccont
lifetime =
name =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " DISPLAY_TEXTEDITOR OUTPUT
Edited by: kumar1819 on Apr 7, 2010 8:05 AM
Solved

Hi kumar,
**************9003*****
PROCESS AFTER INPUT.
MODULE USER_COMMAND_9003.
Case SY-UCOMM.
When 'TAB2'.
Call screen 9002.
**************9003*****
In 9001 and 9002 screen what code u r writing.
Regards,
Raj.

GUI_DOWNLOAD fn module text allignment problem

Similar Messages

Maybe you are looking for