Guixt scripts for all users

Hi
I've made some scripts through guixt but obviously only works in my PC, i supose it's posible to store these scripts in the server or something similar so many different users can run these scripts without going terminar by terminal "installing" my local scripts
Somebody could help me
Thanks and regards

I found the answer and it's very simple
I copy my local script files to a server
I map a network drive pointing to the server
In the profile of Guixt on scripts1 I can put a path referring to the network drive i mapped before
The other users only has to map the network drive and modify the profile in guixt
Hope it helps

Similar Messages

Unable to change keyboard layout for all users on Windows Server 2012 R2

Hi,
I have a requirement where I need to support national keyboard layout for Danish for all users on that machine. When I ran the powershell with script Set-WinUserLanguageList
-LanguageList da-DK it only sets the Danish keyboard layout to the specific logged in user.However the for other users its same English(US) keyboard which is not expected.
Please help me how to set the Danish keyboard for all users on the machine. Its Urgent!Thanks

Hi Mike,
Thanks for reply.
But I need to configure everything using powershell script. Is it possible to use powershell script to setting group policy/ adding logon script ?
These are pretty basic administration tasks and almost always quicker to accomplish with the GUI. Why do you want to use a PowerShell script?
EDIT: Here's some information on the topic however:
https://technet.microsoft.com/en-us/library/cc781361%28v=ws.10%29.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/06/use-powershell-and-group-policy-for-your-logon-script.aspx
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

How do I startup an application for all users at login?

I know about launchd, but I want an application to start whenver a user logs in and run as that user. launchd stuff seems to run as root.
I would prefer to set this up to work for all users, but if that can't be done, just for the current user. I have an installer package and Id like to run this command to set this up from a bash script.

I found this bit of code which is very similar to something else I found.
defaults write ~/Library/Preferences/loginwindow AutoLaunchedApplicationDictionary -array-add '{ "Path" = "/path/to/script"; "Hide" = "0"; }'
That doesn't work. Anyone at all, even for a single user, how do I script a command to get an application to start when a user logs in under 10.8?

How to set up new enviroment variables permanently for all users?

Hi.
I downloadad Apache Tomcat, and need to set enviromental variables for all users.
I tryed setenv commad, but it is not found.
for example # JAVA_HOME="/opt/jre1.6.0" Solaris remembers this variable only for one session and I need for all users permanently.
Thanks.

Thank you.
This file contains a script. Is there difference in putting that line in beginning or end of the file?
#ident     "@(#)profile     1.19     01/03/13 SMI"     /* SVr4.0 1.3     */
# The profile that all logins get before using their own .profile.
trap "" 2 3
export LOGNAME PATH
if [ "$TERM" = "" ]
then
     if /bin/i386
     then
          TERM=sun-color
     else
          TERM=sun
     fi
     export TERM
fi
#     Login and -su shells get /etc/profile services.
#     -rsh is given its environment in its .profile.
case "$0" in
-sh | -ksh | -jsh | -bash)
     if [ ! -f .hushlogin ]
     then
          /usr/sbin/quota
          #     Allow the user to break the Message-Of-The-Day only.
          trap "trap '' 2" 2
          /bin/cat -s /etc/motd
          trap "" 2
          /bin/mail -E
          case $? in
          0)
               echo "You have new mail."
          2)
               echo "You have mail."
          esac
     fi
esac
umask 022
trap 2 3
# Intel Server Control - The following lines
# let the LRA daemon access the X server
if [ -f /usr/bin/X11/xhost -a -f //isc/lra ]
then
     ttyname=`tty`
     ttyname=`basename $ttyname`
     ttykind=`tty | egrep "console|vt"`
     whereami=`finger -s | grep $ttyname | cut -c61-`
     if [ "$whereami" = "" -a "$ttykind" = "" ]
     then
          CURDIS=$DISPLAY
          DISPLAY=unix:0.0
          export DISPLAY
          /usr/X/bin/xhost +unknown 2>/dev/null 1>/dev/null
          DISPLAY=$CURDIS
     fi
fi

How to embed fonts in document for all users

Hello,
we are using a custom font for our documents. I know it's possible to embed fonts in document when saving.
Is there an option to enforce this setting with a policy?
I cannot find the right policy in the Office Policy templates.
We are using Office 2013 x86.
Thanks in advance.

Hi,
Based on my knowledge, the option is document-based, we can't control this on the Policy level.
If your request is to turn on this option for all new created documents. Since all new documents are based on the Normal.dotm template, a workaround is to create a new Normal.dotm template in which this option is checked:
Browse to C:\Users\Username\AppData\Roaming\Microsoft\Templates, open Normal.dotm, tick the option and save it as Normal_1.dotm, save it in the same location.
Then rename the old Normal.dotm to Normal.old, rename Normal_1.dotm to Normal.dotm.
Open Word and create a new blank document, you will see this option is ticked.
To deploy this file for all users, we can write a startup script. The process is like: 1. Remove the old Normal.dotm, 2. Copy the new Normal.dotm template from a network shared location to C:\Users\Username\AppData\Roaming\Microsoft\Templates.
I hope the information is helpful to you.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Default Color, Size and Font for all user.

Hi
I have been looking around for the correct way to set some default styles for all Word users in a domain thrugh GPO. I just have some questions.
So far i can only get it working if it set a "Workgroup templates path" under "User Configuration/Administrative Templates/Microsoft Office 2013/Shared paths". Then the users are able to select it when they say "New" - "Shared"
and then the template
But i would like it to be default for all users, like in the Normal.dotm. But without making a script to replace the file for every users APPDATA.
Then i saw the "User Configuration/Administrative Templates/Microsoft Office 2013/Shared paths/Enterprise templates path", how and what does that do?

Hi,
As far as I know, if we want to distribute the Normal.dotm to users in a domain through GPO, we could
use GPP file extension to
distribute Normal.dotm to the path "C:\Documents and Settings\user name\Application Data\Microsoft\Templates." for every user. For more detailed steps, please refer to the following link:
http://technet.microsoft.com/en-us/library/cc772536.aspx
Similar issue:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/87ab10d3-1cb6-4269-9334-1e0c37527e0a/move-location-of-normaldotdotm-to-central-file-server-best-solution?forum=winserverGP
If you want to config Enterprise templates path, please read this thread:
https://social.technet.microsoft.com/Forums/office/en-US/c4e5c872-402c-4339-9c02-cfa91e949e41/office-2013-templates-group-policies?forum=officesetupdeploy
If you have further question about the GPO, I recommend you post it to GPO forum:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Report all activations of Office 365 ProPlus for all users

Hello:
I know that I can open my Office 365 Settings, Software, and see how many devices I have activated Office 365 Pro-plus on.
What I am looking for is a way for an Admin to run a Powershell script (or command) to retrieve the activations for ALL users in a tenant.
Thanks
Tim

Hi Tim,
As far as I know, this is not possible. We can use Get-msoluser command to get the license status. But we can’t get details of all users’ activated computer name list for the Office 365 tenant with a Powershell script.
By the way, this forum focuses on questions and feedback for Microsoft Office Client. There is not so much about Office 365
console/hosted/cloud aspects here. For your case, I would suggest you to post in the forum of Office 365 Community, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

We are currently looking to set the default preferences in the CMC for all of our users.
I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
Thank you

I thought I could just run it too but when I attempt to I get a Windows Script Host error:
Script: C:\User Prefs.vbs
Line: 1
Char: 1
Error: Expected statement
Code: 800A0400
Source: Microsoft VBScript compilation error.
I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong. I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

Make UDF Read-only for all users

Hi
Can i use any script to make a UDF read-only for all users?
i am looking at CPRF and CUFD Tables
thanks

Hi,
You should never try updating system table directly. That will against supporting policy by SAP.
Thanks,
Gordon

Powershell 4.0 How to use Add-Printer to add printer for all users (machine)

Is there a way I can use Powershell 4.0 Add-Printer cmdlet to add a printer for all users (machine)? I tried from an admin account but it only adds a printer for the currently logged on user.
thanks.

Adding a printer for all users requires having access to their profiles (and registry hive for user) to save the mapped printer information. Your best bet is to either use Group Policy Preferences or write a user logon script that ones when they log in and
maps the printer if not already mapped.
Group Policy Preferences Example
I wrote an article a while back that shows how to use a GPO logon script to map a printer. It doesn't use V4, but the process would be the same as far as a GPO goes.
http://learn-powershell.net/2012/11/15/use-powershell-logon-script-to-update-printer-mappings/
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Setting up proxies for all users and clearing it on logoff

Hi,
This is an emergency, So any help would be welcomed.
Scenario - I have a lab which is configured with windows 8.1 enterprise 64bit. I created two local account. I want to connect it to our proxy such that its set up for all users and local users would not be able to change it. this way they have to log in
to use the browsers (IE/Firefox/Chrome). Secondly if they logout and log back in, it should require them to re-login to use the browsers. (It looks like its cached by default.
Any idea how to do these, Any suggestions are welcome.
I would Preferably like to script this so that I can run it on all machines.
Thanks
Manoj

Hi,
Could you please have a share with the network environment?
If we are in a domain environment, we could configure the proxy using group policy, but the configuration won't change unless the policy changes.
For the scripting, if you would like to use, we'd better ask in the scripting guys forum for a better help.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Best regards
Michael Shao
TechNet Community Support

How to delete existing e-mail signature for all users in outlook 2010

Dears,
How to delete existing (or reset to none ) e-mail signature for all users .
If anyone knows where I can find this script or another way of accomplishing this I would be very thankful.
outlook Version : 2010
PS : Not to disable.
Khaja Hameed

If you want to manage signatures for multiple users your best bet is to use Group Policy.
See:
Setting up a Corporate Signature | HowTo-Outlook
http://www.howto-outlook.com/howto/corporatesignatures.htm
<p>Eric Legault (<a href="https:/mvp.support.microsoft.com/default.aspx/profile/legault">MVP: Outlook</a>)<br/> <a href="http://about.me/ericmlegault">About me...</a><br/> <a href="http://www.outlookappins.com/products/social-contacts">Outlook
Appins</a>: Store Social Media fields in your Outlook Contacts!</p>

Remove Following people from mysite for all users

[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.Office.Server")
$web = Get-SPWeb https://www.contoso.com/teams/yourteam
$context = [Microsoft.SharePoint.SPServiceContext]::GetContext([Microsoft.SharePoint.SPSite]$web.Site)
$upm = New-Object Microsoft.Office.Server.UserProfiles.UserProfileManager $context
$users = $web.AssociatedMemberGroup.Users | where IsDomainGroup -eq $false
$useraccounts = $users | select loginname | Foreach {"$($_.loginname)"}
foreach ($user in $users) {
$profile = $upm.GetUserProfile($user.UserLogin)
#$objectToFollowRelativeToWeb = "/"
if ($profile)
#Create a Social Manager profile
#SPSocialFollowingManager
$followManager = New-Object Microsoft.Office.Server.Social.SPSocialFollowingManager($profile, $context)
$following = $followManager.GetFollowed([Microsoft.Office.Server.Social.SPSocialActorTypes]::Users)
for ($i=$following.Count - 1; $i -ge 0; $i--) {
$followed = $following[$i]
$acctname = $followed.AccountName
#if claims:
$acctname = 'i:0#.w|'+$acctname
if ($acctname -iin $useraccounts ) {
[Microsoft.Office.Server.Social.SPSocialFollowResult]$res = $followManager.StopFollowing($followed)
Write-Verbose "$($user.UserLogin) stop following $acctname result is $res"
I have the above script from one of the technet solution to remove followeronly for Contributors from MySite. I want this script to run for all user and remove all existing association. Can someone help me update this script.
Thanks Ba$va

Hi Basva,
According to your description, my understanding is that you want to remove all existing association for all users
The $users = $web.AssociatedMemberGroup.Users | where IsDomainGroup -eq $false is to get all users in Contributors group. You can change the line to
$users = $web.AllUsers, then run the script, compare the result.
Here is an post for getting all users using PowerShell, please take a look at:
http://www.sharepoint2013.me/Blog/Post/160/Get-all-the-unique-users-in-a-farm-using-PowerShell-script
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Sideloading app on 8.1 for all users

I want to sideload a windows 8.1 app for all users on a surface tablet. What I was originally doing was running a powershell script as part of a MSI to sideload an app using the
Add-AppxPackage command. I have found out that I actually need to install the windows app for all users and from googling, it looks like
Add-AppxProvisionedPackage is what I am looking for. However, it seems that this command is designed to modify a windows image or modify the Online (current install) to have this app when
a new user is created as the documentation for -PackagePath reads "This package will be added for every new user account." I want the install to add the app to all current users on the machine and to allow new users to have this app as well that
log into the machine. How can I do this?

Hi,
According to the article below, the command Add-AppxProvisionedPackage should be work to sideload store app to all user.
https://technet.microsoft.com/en-us/library/hh824882.aspx
https://technet.microsoft.com/en-us/windows/jj874388.aspx
Sideload the app for all users
DISM is a command-line tool that you can use to service a Windows image—online or offline. (If you are not familiar with DISM, see Deployment Image Servicing and Management Technical Reference.) You can use DISM to provision a Windows Store app in an online
Windows image for all users who share the computer. To do that, you use the Add-ProvisionedAppxPackage option:
Log on to contoso-pc using an account with administrative privileges on the computer. You must use an administrator account here, because you are provisioning an app in the image.
On the Start screen, type PowerShell and press Ctrl + Shift + Enter.
On the User Account Control dialog box, click Yes.
At the Windows PowerShell prompt, run the following command, where SampleApp is the path and file name of the package file you created (for example, MySample_1.0.0.0_AnyCPU_Debug.appx):
DISM /Online /Add-ProvisionedAppxPackage /PackagePath:“SampleApp” /skiplicense
Monitor the installation, and close the Windows PowerShell window after it finishes.
To test this example, you need to log onto to the computer using one of your test accounts. You cannot run the app by using the built-in local or domain Administrator account. In this case, we logged on to the computer as Mark. Then, on the Start screen, click
the app to run it. (If you do not see the app on the Start screen, type the app’s name to find it, and then click the app’s tile.) After verifying that the app works for the current user account, log onto the computer using a different test account and run
the app. Because you used DISM to provision the app in the image, it is available to both accounts.
Roger Lu
TechNet Community Support

Pin shortcuts to Taskbar and Start Menu for all users in Windows 7

How can i Pin shortcuts to Taskbar and Start Menu for All Users in Windows 7? Office 2007 Word, Excel and Outlook.

There are a few ways...
You can configure a default profile which will give you the ability to setup the Start Menu as you want it with the items pinned how you like. However, in my experience customizations done to the Taskbar are not maintained in a default profile.
So, one way to get around that would be to create a script and use the "Active Setup" hooks that are built into Windows 7 to achieve the desired results.
If you combine this script...
http://blogs.technet.com/deploymentguys/archive/2009/04/08/pin-items-to-the-start-menu-or-windows-7-taskbar-via-script.aspx
With Active Setup...
http://www.visualbasicscript.com/Active-Setup-Examples-m67461.aspx
You can get the results you want to get...
Pinned items on the Taskbar have two components, one is in the file system and the other is in the registry. You could also use GPO Preferences to add both components to a new profile and therby get similar results. I played around with this method a little and did get it to work also.
Mike N.

Guixt scripts for all users

Similar Messages

Maybe you are looking for