H.264, Clips from EyeTv3 going into iMovie.

So when I export my HD clips from EyeTv3 using the format H.264 and play them back on VLC they're fine. No jitter at all, perfect. Then I import my clip from my desktop to iMovie (Not optimising the video), again it's fine, no jitter. Then I export my movie by clicking "Share, export movie, I choose HD, and I look at what it is and it says it's 'H.264, 25 FPS, 10 Mbps" but in EyeTv3 my settings are 13.5 Mbps and 59.94 fps." I don't know if this effects it? But after I've exported my clip has this jitter. I think I have to change some settings in iMovie because everything is fine until iMovie, PLEASE HELP.

It sounds like you need to keep the frame rate the same from the EyeTV source files to iMovie. If one is 25 and one is 29.97, you will get the jitter.

Similar Messages

Video clips imported from an iPhone into iMovie ver 6 are rotated 90 degrees; how can I fix this or avoid it?

Video clips imported from an iPhone into iMovie ver 6 are rotated 90 degrees; how can I fix this or avoid it?

iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

Trouble importing from canon t4i into imove

So I have a canon t4i and I've been having trouble importing my videos from my memory card to imovie, and iphoto wont even let me upload it. I tried converting it to AVI (which took a few hours) and It's still not doing anything. I don't know what to do and it's really frustrating.

Hello Samantha3232,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Some video clips may not import into iMovie when using the Camera Import window
http://support.apple.com/kb/TS4485
From the File menu, choose Import > Movies.
In the dialog that appears, select your camera from the sidebar.
Locate and select the video clips on your camera that you would like to import.
Click the Import button.
Best of luck,
Mario

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago. I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

How do I import video from Sony TRV22E into iMovie ?

How do I import video from Sony TRV22E into iMovie ?

Hi
Sony TRV22E - CAN ONLY export the VIDEO material via a FireWire Cable (iLinc)
Then Your Mac need eiter
- a FireWire port - or -
- a Thunderbolt port
if only Thunderbolt - Then You need a FireWire to Thunderbolt converter.
The USB- can only copy over the Still photos You also cam take with Your Camera. Will NEVER work for Video Export.
Yours Bengt W

How do I reload my video clips that I recorded into iMovie?

How do I reload my video clips that I recorded into iMovie? My project is there but my original iMovie videos are gone which does not allow my iMovie to play. The screen is black. I need Help!

Please have a look at my post at:
https://discussions.apple.com/thread/5649660?tstart=0
where I describe what files should be present for iMovie 9 to work for someone else with a similar problem. They must either be in the users Movies folder on the start up drive or at the root level of any other partition or connected external drive.

Is it possible to export a video clip from DVD player to iMovie '09?

If I load a homemade DVD onto my iMac using Disk Utility and then import either the entire disc or portions of the disc into iMovie, that works just fine. However I noticed that some clips are missing in iMovie, even though they are on the iMac in form of a .dmg file on the desktop. The same file that was used to import in to iMovie. If I look at this file using DVD player, everything is there, but some of these clips are missing in the event window. So I created a video clip in DVD player of those pieces missing in iMovie and now how can I get these into iMovie?

Hey, best way to import video from a DVD video disc for editing is to acctually have a simple video file. Use Handbrake or MPEG StreamClip to read the disc and create a video file off the video stream.
You could also set in and out points anc manually create several clips, which may help with playback and rendering for editing. I don't know how extensive you're going to get in your editing with iMovie...
Hope that helped.

Audio from dvd imported into iMovie

I don't know alot about any of this but here goes....my daughter went skydiviing and had it video taped with sound of course. The videographer added music to the DVD of the skydive. I got it into iMovie (I want to edit and get some still shots from it) but the sound is very low. I've got the clip control up to 150%, and my computer volume control on the key board is all the way up. First question: what else can I do to help volume? Second question: Is there a way to seperate the original sound of the video from the music that was added to the DVD? The music overpowers the converstion.
I have iMovie HD (6.0.3), Streamclip, and QuickTime MPEG2 if these would be helpful. Thank You

+On the volume issue, if you can extract the audio from the clip, and then make several copies of the audio clip, overlaying them one on top of the other in your iMovie project, that might boost the volume.+
Yes, but that would not separate out the music from the sound she wants to hear over the music.

How do you move movies from iPhoto library into iMovie

Previously, short movie clips that were downloaded from my digital camera into iPhoto automatically appeared in iMovie. Now, however, these movie clips still remain in my iPhoto library but do not show up in the Event Library under the iPhoto Videos folder. How do I get them back into iMovie? These are movies going back to 2004. Before they "disappeared" I had edited 250 clips and shared them in iTunes. They remain in my Project Library in iMovie but I'd like to finish editing them and sharing them in iTunes. I am working with iMovie '09, 8.0.6 (821) and iPhoto version 9.6 (910.29).

Greetings Joy,
If you are having an issue with some video showing up in iPhoto but not being available in iMovie, use the steps in this article to bring it over -
iMovie may not recognize some videos in iPhoto or Aperture - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Importing a VLC movies from .avi files into iMovie

I have a camera that records in .avi and I watch them on my Mac with VLC.
Is there a way to import these video clips into iMovie. I do not seem to be doing it correctly.
Thanks for any help.

Hi megrove,
You may need to convert the .avi clips to another format. The free program MPEG Streamclip can convert most formats. It's downloadable from this site: http://www.squared5.com/
It's best to convert to AIC (Apple Intermediate Codec). This is the format that iMovie automatically converts compressed files to when importing from cameras or camera archives, for example, AVCHD .mts files. The conversion process expands the compressed files into full frames suitable for editing by iMovie. MPEG Streamclip will do this conversion for you, allowing the exported AIC file to be easily imported to iMovie without further conversion.
MPEG Streamclip can also convert files to the H.264 format, which also works nicely with iMovie '09.
John

Movie clip won't import into iMovie.

Hi
Ok at the risk of sounding like a complete dumbo...
I have a JVC Everio G 30Gb Hard disc camcorder. I can't get my clip to import into iMovie. All I get is the following message...
"The file could not be imported: The file “File Name Here” can’t be imported; QuickTime couldn’t parse it: -2048"
Can anybody help or know some way around this?
I sorta figured that like iPhoto, where you can pretty much download from any big brand digital camera, it would be the same with iMovie.
eMac Mac OS X (10.4.3)
eMac Mac OS X (10.4.3)

Hi iMovieNewbie - welcome to the forum!
Many people have your ailment!! The problem is that your camera records in MPEG2 format which is really not compatible with iMovie. iMovie's native format is DV, which is designed to be a no-loss, editable format. MPEG is really just a viewing format.
There are workarounds, but they involve converting MPEG into DV, for which you will need:
MPEG StreamClip (free):
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
and
Apple MPEG2 PlayBack($20):
http://www.apple.com/quicktime/mpeg2/
Read about it all here:
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
http://discussions.apple.com/thread.jspa?threadID=267352&tstart=0

Clips do not load into iMovie Project Browser

I have imported a full feature Creative Commons movie into iMovie to edit for a short music video. It downloaded in MP4 format and originally loaded into the Project browser but would not let me split clips. I've tried converting it to .MOV in MPEG Streamclip and now the clips don’t even show up in the Project Browser. I see the clips in the Event Browser but they will not load into Project Browser. I've tried converting it to .MOV in Quicktime where I was able to split a clip. I then tried to import that whole movie file into iMovie but it won’t import. What am I doing wrong?

When I have the iMovie Library (with the sub-file which iMovie-generated titled of “2015”) selected in the Sidebar the clips show in the Event Browser window but not in Project Browser window. The sub-file to “2015” is my movie name. When I select this file, the Event Browser goes black with white-lettered words: “No clips found.” There are no clips in the Project Browser as well.

How do I copy clips from one project into another?

Ok, I have gathers a bunch of clips from various events to forma project. Now I want to rearrange everything in a new project. Can I somehow get my first project to act like an event? That way I can grab the clips into a new project window... Thanks

If I understand what you are trying to do, you do not need to "get my first project to act like an event". Merely drag the same clips you used in your first project from their original event location(s) into the new project. Then reorder or re-edit the clips as desired. There is no need to make them into a "dummy" project first.
If you want to have EVERY (or almost every) clip in both the first and new projects, with the second merely being reordered or re-edited, use the *File > Duplicate Project* menu command. Then go to work on the newly duplicated copy of the project. You can rename the duplicated project as desired and reorder, edit, or delete the clips in the duplicated project without dragging them from any event.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Video from DVD imported into iMovie

I have a DVD with a short movie on it (someone else burned the DVD for me) and I want to take the video from that DVD and import it into iMovie so that I can add music, titles, etc. How do I go about doing this? Thanks for your help and have a great day.

How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Using MPEG or DVD footage
http://www.danslagle.com/mac/iMovie/tips_tricks/6010.shtml
MPEG Streamclip
http://www.alfanet.it/squared5/mpegstreamclip.html
MPEG-2 Playback
http://www.apple.com/quicktime/mpeg2/
Sue
PS. Please do not violate any copywrite laws.

Can't import photos from new "Photo" into iMovie 9.0.

Since upgrading to the new Photo app, iMovie 9.0 only recognizes Photo Booth. Previously I could drag and drop selected photos into iMovie, but now can't import them that way or through the Photo Browser in iMovie. Any suggestions?

Thanks for your insight. Over the course of about a week, I did persistently try to upgrade to iMovie 10 but, despite the help of the Apple Support Community, could not get all my projects to migrate properly from iMovie 9 to 10. Many of them Many of the 300 short projects come in a jumbled mess. So I'm stuck with iMovie 9, which, in turn, means Photos won't connect properly when working with iMovie. At least I know to stop trying and I'm able to go back to iPhoto without suffering any repercussions.

H.264, Clips from EyeTv3 going into iMovie.

Similar Messages

Maybe you are looking for