H:commandButton and attribute image

I cannot make work a h:commandButton that contains an image.When
the browser opens a see "a not found image" icon.
The code is
<h:commandButton image="/images/englishFlag.jpg"
actionListener="#{rushmore.listen}"
action="#{rushmore.act}"/> However I don't thing there is any problem with the image Url since the following component displays the image with no problem
<h:graphicImage value="/images/englishFlag.jpg" style="border:0px"/>Any suggestion?

try taking out the leading slash.. ? Sorry not very useful but you never know. If you could give a mapping of your directories

Similar Messages

In Lists - How do you write an Image and Attributes in the defined fields?

I have tried #IMAGE_PREFIX#load_ascii.gif with no results..
then tried /i/load_ascii.gif
then tried load_ascii.gif
Can you give me an example or something else is wrong because just a diamond bullet is showing up? Trying to emulate the Run icon in the Application Developer's home Page.. or is this the wrong way of doing it?

Using a list, I want to apply an image from the /i/ folder. In the List Entry Area under Label and Sequence I tried several syntax varations with no luck in the Image and Image Attributes Fields. With the List Entry Label I want to display and Icon (Image) they can click on with the List Entry Label below the image.. I've tried #IMAGE_PREFIX#load_ascii.gif with no results..

Anyone know Disk Utility, Ignore Ownership, and disk image DL DVD issues?

I am currently having issues with backup DVD's I burned using Disk Utility. I can put the dual layer DVD's in and the system reads them. When I try to pull a file off the Dual Layer DVD a circle with an X appears notifying me that I cannot copy the files to my desk top.
When I check the DVD's permissions it reads Admin (me) read and write with the ignore ownership checkbox checked...which means I should be able to pull files off the DVD. The only way I can currently get information off the DVD is to duplicate the entire disk to a new folder by selecting the DVD while holding down the Cntrl key and selecting duplicate. I have had other issues with DVD's and disk images in Leopard....including having to eject either through disk utility or by selecting the image with the Cntrl key held down. Finder eject, keyboard eject, and the menu eject selections suddenly report that the disk is in use.
The DVD's were burned by creating a dual layer dvd image through disk utility with the read/write option checked.
After duplicating 2-3 disks, the system itself is unable to mount any more disks from the series of backups. When I look at disk utility it reads that the disk is not mountable. I have to restart my computer so the system can continue to read the backups.
My Itunes disk backups are marked the same way (ignore ownership) with admin read/write privlages....I have no problem pulling files off these disks.
I have tried both logging in as root and booting from an external drive...same problem. Is this some nasty Disk Utility bug? Is anyone else having bizarre permission related issues with Disk Utility and Disk Images.

When you create the image in Disk Utility, did you
change the 'Partitions' setting?
If you leave it to read 'CD/DVD', it will create a ISO9660/UDF image.
To be able to maintain permission and extended file attributes, you
need to select 'GUID Partition Map'.
I assume you used iTunes to create your music backup?
It seems it creates the correct image type for you.
Before sending this message, I actually created a single layer image,
copied some files to it and gave additional permissions to other users on my system.
Afterwards I copied the files to my Desktop, verifying that the attributes are still intact.
Best regards
(It took quite a while to burn this 4x DVD-RW Anyways, I hope I could help)

Importing note and warning images (assigned via reference pages)

Hi all,
I am importing a document that contains warning and note images that are assigned to certein paragraph styles via the reference pages. Naturally these do not convert using the standard settings.
My first attempt was to assign numbering settings to these paragraphs before importing and to use the 'convert to HTML list' setting. Then I tried to assign image styles to the generated lists in the CSS using list-style: url("image_for_warning.jpg");
If I assing this to the paragraph styles (p.something) then it works in preview, but most browsers dont support it.
The problem: Robohelp generates an awfull mess when converting lists to HTML.
When I use an ordered numbering setting in FM, then Robohelp creates this:
<ol >
<li style="1"><p class="warning">..
When I use an unordered numbering setting in FM (using characters as bullets), Robohelp generates this:
<ul type="disc">
<li><p class="warning">..
I never get a clean HTML list with a specific style assigned to the UL. Any ideas to this?
Robert

Hi Robert,
I agree with you that RH doesn't provide an easy way to format the lists as you like, but it doesn't have much to do with FrameMaker.
The HTML that you're creating is good, it's the CSS that needs to be tweaked. I had the privelege of access to a true CSS expert at a previous job; he got my lists to work properly.
I realized 2 things while watching him solve the problem:
Because of browser and version issues, CSS is a real headache. He would sometimes use 3 or 4 different CSS options for the same formatting value, and most of this was simply arcane knowledge of allowable CSS attributes and allowable CSS values.
Money spent to address these issues is well-spent
It would be nice if Adobe were able to develop this feature for HTML lists within Robohelp, but from what I've seen, their RH Lists option is the closest you can expect to see.
-Matt

Difference between CommandButton and CommandToolbarButton? (Loading popup )

Hi! I created popup and CommandButton to open it. But when I try to open popup then in Server log I have error:
<PopupRenderer><encodeAll> Loading popup: pt1:uploadWindow during a full-page request is not supported.
But when I tried to use CommandToolbarButton, not CommandButton, then the error was gone.
What is difference between these two buttons?
Best regards, Debuger!

Default value of the attribute <tt>partialSubmit</tt> is <tt>false</tt> for <af:commandButton> and <tt>true</tt> for <af:commandToolbarButton> (see tag documentation). That's why you have succeeded by using <af:commandToolbarButton>.
<af:commandToolbarButton> is intended for use mainly inside <af:toolbar> components. When used in a toolbar the border of the button renders only when you move the mouse cursor over it.
If you set <tt>partialSubmit="true"</tt> you will be able to open the popup using <af:commandButton> too.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

Web of Trust no longer working with google and bing image searches

Hello All,
I have searched and searched but have not found an answer that matches my specifics. Any help would be appreciated.
I used to be able to do this but now I can no longer search and browse images on google or bing image search and have Web of Trust function. Here is how I am going about it.
What I use:
DuckDuckGo's annoymous google or bing image search link when I enter querries. Also, searching directly from Google's or Bing's image search page doesn't work with WOT anymore either.
Firefox 23.0.1
The following add-on's:
Add-block plus 2.3.2
BetterPrivacy 1.68
Flagfox 4.2.12
Ghostery 5.0.4
Google/Yandex search link fix 1.4.1
No Script 2.6.7.1
Web of Trust 20130515
If anyone has a fix for this please let me know.

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

What is diff B/W dalta image and reverse image

What is diff B/W dalta image and reverse image
Edited by: Philip Eller on Jun 3, 2008 8:44 AM
Edited by: Philip Eller on Jun 17, 2008 9:18 AM*

Please post your question to the BW forum.

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

What is the fastest way to record and write image data?

Hello,
I am new to labview and am using the IMAQ software package to record and write data from a CCD camera to the hard drive. The end goal is a program that records and saves as much data as possible as quickly as possible, for experiments lasting on the scale of days. I have been experimenting with the snap, grab, and sequence methods of recording. To save the image data I was told by NI customer support that TDMS streaming would be the fastest method. I have also been experimenting with the TDMS VIs, however I have found the IMAQ Write File 2 VI to be faster in practice. Am I doing something wrong with the TDMS file structure? Is there a more efficient way to convert IMAQ image data to a dataform that can be written as TDMS? I am posting two of my programs to provide a clearer example of what I am trying to do. The first takes a snap of the image and appends it to a TDMS file. The second is the fastest I have found so far and uses Grab to record the images and the IMAQ Write File VI to save them.
Thanks
Attachments:
Camera Capture (Snap) and stream TDMS.vi ‏24 KB
Camera Capture (Grab) and write image.vi ‏24 KB

Hi
For me it is no surprise that the second VI is faster then the first one, the reason is you can not compare this two VI with each other.
In the first VI you work with TDMS files, in the second with png files. That would be much faster, because TDMS files need a lot of diskspace.
Second point, why do you open, write and close for eacht iteration of the for loop a TDMS file in your first VI? That need really a lot of resources, so it coudn´t be fats as well.
Save your converted pictures in one array, an after the acquisition you can save it in one TDMS file. When you need for each picture a TDMS file you have to know that this need some time to do this.
So now for the architecture of your first VI, please look to the LL Sequence.vifrom the examples (C:\Program Files\National Instruments\LabVIEW 8.6\examples\IMAQ\IMAQ Low Level.llb\LL Sequence.vi), there you can see how an acquisition of a number of images have been to do.
When you like it really fast, you make a producer/consumer architecture (see examples in LabVIEW for that).
So in the first whileloop you acquire the images, write into a queue and in the second, parallel whileloop you read the queue and save the images. (see attachment)
Hope that helps
Kind regards
Beat
NI Germany
Attachments:
ProducerConsumerData.vi ‏10 KB
ProducerConsumerData_LV8.5.vi ‏12 KB

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???

Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972

Efficiency of decoding and displaying image files?

BRIEF SUMMARY
My question is this: can Flash Player download JPG and GIF
files from a server and rapidly open/decode them, ready for
display, efficiently and
entirely 'in memory'?
Would Flex be a good choice of language for developing a RIA
that needs to continually download lots of JPG and GIF images
on-the-fly from the server and render them on the screen? I *don't*
want my application to thrash the hard disc.
BACKGROUND
I am designing a 'rich' web app, and I'm investigating
whether Flex is the right tool for the job.
Although Flash's animation features are an obvious selling
point for implementing my user interface, I also need to do some
server-side rendering. What I want to do is perhaps a little
unorthodox: I will be generating lots of GIF and JPG files on the
fly and these will be streamed to the client (along with other
application data, e.g. in XML format) to update different parts of
the on-screen document. In need this to happen very quickly (in
some cases, creating the effect of animation).
It happens that JPGs and 16-colour GIFs will be, by far, the
most efficient formats for streaming the images, because of the
nature of the application. I could of course send the images in
some proprietary format, geared for my application, but presumably
decoding the images would be slow as I would have to implement this
myself in ActionScript, and so I would be limited by the speed of
Flex 'bytecode'. (I realise Flash is a lot more optimised than it
once was, but I am hoping to see a gain from using image formats
that Flash natively understands!)
Naturally the internet bandwidth should (in principle) be the
bottleneck. However, assuming I can get my image files to the
client on time, want I want to know is:
how efficient is Flash at loading such files?
Bearing in mind that I'm not just displaying the occasional
image -- I will be doing this continuously. Most of the images
won't be huge, but there will be several separate images per
second.
The image files will be a mixture of normal colour JPGs and
4-bit colour GIFs (LZW-compressed). I know that Flash natively
supports these formats, but depending on how Adobe have implemented
their LZW/Huffman decoding and so on, and how much overhead there
is in opening/processing downloaded image files before they are
ready to 'blit' to the screen, I imagine this could be pretty fast
or pretty slow!
If my client only has a modest PC, I don't want the JPG/GIF
decoding alone to be thrashing his CPU (or indeed the disc) before
I've even got started on 'Flashy' vector stuff.
I'm new to Flash, so are there any 'gotchas' I need to know
about?
E.g. Would it be fair to assume Flash Player will do the
decoding of the downloaded image entirely 'in memory' without
trying to do anything clever like caching the file to disc, or
calling any libraries which might slow down the whole process? It
would be no good at all if the images were first written to the
client's hard disc before being ready to display, for example.
Further, if I'm doing something a little out-of-the-ordinary,
and there is no 'guarantee' that images will be loaded quickly,
what I'm doing might be a bad idea if a later version of Flash
Player may (for example) suddenly start doing some disc access in
the process of opening a newly downloaded image. So, while I could
just 'try it and see', what I really need is some assurance that
what I'm doing is sensible and is likely to carry on working in
future.
Finally, I imagine JPG/GIF decoding could be something that
would vary from platform to platform (e.g. for the sake of
argument, Flash Player for Windows could use a highly-optimised
library, but other versions could be very inefficient).
This could be the 'make or break' of my application, so all
advice is welcome! :) Thanks in advance.

You need a servlet/jsf component to render the image in the response.
Look at this: http://www.irian.at/myfaces-sandbox/graphicImageDynamic.jsf

How to decoding and encoding PNG and GIF images?

I could decode and encode JPEG images using following create functions which are in com.sun.image.codec.jpeg package.
JPEGImageDecoder decoder = JPEGCodec .createJPEGDecoder(inputStream);
JPEGImageEncoder encoder = JPEGCodec .createJPEGEncoder(outputStream);
But I dont know required package and functions to decode and encode PNG and GIF images. Please help me.

Is the API that hard to follow?
ImageIO.read( file/stream/url)
ImageIO.write( image, format (e.g. PNG, GIF(1), JPEG), file/stream what have you)
1) Not sure if Java supports GIF saving, it might if you install JAI, or Java 6.

Upload and display image in webside

Hello Friends,
I am developing an auction web site ,and facing some problem so I need your help.
There is some confusion about uploading and displaying images in website .In web based
application if I want to upload images than where have to store the images database or server
side any folder .I have not idea about that please send your ideas and sussesions.
Second problem is What is the best way to display images in webside either giving a direct
path of server side image folder or I need to retrieve all images from database .
I have no idea about it please send me your guideline which are usefull for me to implement in my
website.
what is the correct way to upload and display images in website ?
Thanks . Have a nice day.

If you are using a Container you just leave your image files in the home directory of your web application. And forget this idea about database. It´s not necessary in this case.
To display the images just use HTML, <img src="url">.

H:commandButton and attribute image

Similar Messages

Maybe you are looking for