Handling Transport Errors in OSB Proxy Services

Hi,
I have a requirement of storing and handling Transport level Security Errors in my proxy services . In fact, my proxy services are secured with HTTP Basic Authentication and i am not able to catch authentication errors. I added a Service Error Handler to my proxy service but unfortunatly it doesn't handle these errors.
Does anyone know how can we catch these errors in OSB, and if it is possible to execute activities like alerts, reports, logging in these cases.
I read in some blogs that Error handlers are nested like this : Route Node -> Proxy Service -> System Error Handler
so maybe it would be good to customize the System Error Handler Behavior. I don't know if this is possible.
Any help will be appreciated.
Best regards
Farouk

Transport level authentication is done at transport layer even before the actual proxy service gets initiated. So you wont be able to catch authentication errors in the proxy service (and do alerting/logging/reporting etc). You can probably try enabling debug logging for HTTP protocol and see if you can capture these errors in the Access.log of the servers.

Similar Messages

OSB - how to handle poll file error in FTP Proxy Service

I configed a proxy service to poll file from a FTP server.
How can I capture the error when the proxy service cannnot poll? (FTP server is down, folder not found, username invalid, etc )
I want to make it show in the Operations >Message Reports table.

It is not possible. Those errors will only be logged to logfile.
Manoj

Extracting MIME attachment from email using OSB proxy service - email transport

Hi,
I'm reading email messages(multipart/mixed) with attachments(pdf, zip, xml and csv) from MS Exchange Server 2010 using OSB proxy service email transport.I need to save the attachments to a local folder and process one of the attachments, an XML file. Below is the proxy service config.
Proxy Service Configuration (Test1/Proxy Services/GetEmail)
Actions:
General Configuration
Service Type   Messaging Service
Message Type Configuration
Request Message Type
Text
Response Message Type
None
Transport Configuration
Protocol   email
Endpoint URI   mailfrom:mailserver.net:143
Get All Headers   No
Headers
EMAIL Transport Configuration
Email Protocol   imap
Service Account   Test1/Proxy Services/email_acc
Managed Server   WLS_OSB1
Polling Interval   30
Read Limit   2
Pass By Reference   false
Pass Attachments By Reference   false
Post Read Action   move
IMAP Move Folder   processed
Attachments   archive
Download Directory   \\soasup-stor01\Vacancy\test\download
Archive Directory   \\soasup-stor01\Vacancy\test\archive
Error Directory   \\soasup-stor01\Vacancy\test\error
Request Encoding   iso-8859-1
Message Handling Configuration
Transaction Required   Disabled
Same Transaction For Response   Disabled
Content Streaming   Disabled
The polling is working fine. I've encoded the attachment variable to Base64 using a java callout.$attachments/ctx:attachment/ctx:body/ctx:binary-content has been passed as the byte[] input to the java method and the response is captured in $encodedAttachment. I've created a SaveFile BS(file type) with Request Message Type = Binary and Response Message Type = None. I've tried replacing the node ./ctx:binary-content in body variable with encodedAttachment in the request action of the Publish action to call the BS. One file is getting created with contents of the entire email, MIME headers and boundary parts along with the base64 encoded attachments.
<Contents from the created file>
MIME-Version: 1.0
Content-Type: multipart/related; boundary=MIME_Boundary;
type="binary/octet-stream"
--MIME_Boundary
Content-Type: binary/octet-stream
Content-Transfer-Encoding: 8bit
Thanks & Regards,
Samyajit Talukdar
: [email protected]
-----Original Message-----
From: Samyajit Talukdar
Sent: 10 April 2015 14:11
To: MS MLRP Returns
Subject: FW: 22222
Thanks & Regards,
Samyajit Talukdar
: [email protected]
--MIME_Boundary
Content-Type: application/vnd.ms-excel; name="soainfra_v$session.xls"
Content-Transfer-Encoding: base64
Content-Description: soainfra_v$session.xls
Content-Disposition: attachment; filename="soainfra_v$session.xls";
size=25618; creation-date="Thu, 27 Nov 2014 09:56:35 GMT";
modification-date="Fri, 10 Apr 2015 09:28:23 GMT"
0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAABAAAAAQAAAAAAAAAA
EAAAJgAAAAEAAAD+////AAAAAAAAAAD/////////////////////////////////////////////
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAA=
--MIME_Boundary--
If I put a delete action in the request to Publish action for SaveFile BS to delete the $attachments, the created file contains only the email body part and the attachment boundary part is missing.
I've uploaded the OSB log with full trace enabled.
How can I pass the encodedAttachment to the BS for saving the files?
Would iterating through the $aatachment/ctx:attachment give me the individual attachments for saving and processing, as there are separate binary-content refs in them?
Any help to achieve my requirement is highly appreciated.
Thanks in advance.

Hi Manoj,
Thanks for the quick reply to my query.
The thing is, the link you have provided talks more from changing the business Service configurations i.e. the type of the service etc, but the concern is, that the Business Service is already Implemented and hence the change would not be an appropriate option for me.
Please let me know, if any more information is required.
Thanks & Regards,
Anu

Need Help:Handling CLOB in OSB Proxy Service

Hello All-
We have created an AQ in Oracle DB which will have the following message Structure:
CREATE OR REPLACE TYPE enqueue_payload AS OBJECT
( field1 VARCHAR2(100),
field2 VARCHAR2(100),
field3 DATE,
field4 VARCHAR2(100),
field5 NUMBER,
payload CLOB,
In the Payload field we are enqueing an XML message.
We have to use a OSB proxy service to dequeue the message from the AQ, transform it to another format and send to a SOA Composite.
We created a AQ Adapter in Jdeveloper 11g and imported the WSDL, XSD and .jca jca binding file into the OSB project. And configured the OSB proxy service using the WSDL imported.
However in OSB proxy service message flow when I try to create an XQUERY transformation, I see that the Payload field does not expose the structure of the XML message that is being enqueued. I even changed the message structure definition to have the payload field as XMLType. But it didn't help.
On analyzing the XSD created by AQ Adapter, I see that the payload is being defined as "string" in the XSD.
Inputs Needed
=========
1. How can we parse the payload field defined as CLOB/XMLType in OSB so that I can see the structure of the XML message it holds ?
2. Is there any in-built function in OSB to convert it to XML ?
3. Any other inputs in order to transform the XML message coming in the payload field as CLOB/XMLType
Please provide your inputs and I hope that I have clearly explained my use case.
Thanks in advance for your time and help!!
Regards,
Dibya

Hi Atheek-
Please find the logs below:
Payload:: Indicates the actual payload with all the headers fields coming from AQ
Payload After Applying the Function:: Indicates the data that is logged after applying the fn-bea:inlinedXML function.
The function fn-bea:inlinedXML is extracting the data from the XML tags :(
####<Dec 20, 2010 12:14:26 PM GMT+05:30> <Info> <ALSB Logging> <vhydaiavm-03> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-000A464703C2C06A4338> <6751713a0ce9f61d:-6e70b631:12d02855fef:-7ff4-0000000000000002> <1292827466595> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, stage1, REQUEST] Payload:: <apps:ORA_FUSION_LOAD_XMLTYPE xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:apps="http://xmlns.oracle.com/xdb/APPS">
*<RICE_ID>PRJ_INT_30</RICE_ID>*
*<SOURCE_SYSTEM>ORACLE</SOURCE_SYSTEM>*
*<DATETIME>2010-12-20T10:49:17.000Z</DATETIME>*
*<TRANSACTION_ID>PRJ_INT_30-1</TRANSACTION_ID>*
*<RECORD_COUNT>1</RECORD_COUNT>*
*<PAYLOAD><![CDATA[<ALTPPSEGHIERARCHY><sgmt_name>Company</sgmt_name><include_parent_child>C</include_parent_child><parent_flex_value>P</parent_flex_value><child_flex_value_low>03</child_flex_value_low><child_flex_value_high>03</child_flex_value_high><start_date_active></start_date_active><end_date_active></end_date_active></ALTPPSEGHIERARCHY>]]></PAYLOAD>*
*<ATTRIBUTE1 NULL="TRUE"/>*
*<ATTRIBUTE2 NULL="TRUE"/>*
*<ATTRIBUTE3 NULL="TRUE"/>*
*<ATTRIBUTE4 NULL="TRUE"/>*
*<ATTRIBUTE5 NULL="TRUE"/>*
*</apps:ORA_FUSION_LOAD_XMLTYPE>>*
####<Dec 20, 2010 12:14:26 PM GMT+05:30> <Info> <ALSB Logging> <vhydaiavm-03> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-000A464703C2C06A4338> <6751713a0ce9f61d:-6e70b631:12d02855fef:-7ff4-0000000000000002> <1292827466595> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, stage1, REQUEST] Payload After Applying the Function:: PRJ_INT_30ORACLE2010-12-20T10:49:17.000ZPRJ_INT_30-11>
####<Dec 20, 2010 12:14:26 PM GMT+05:30> <Info> <JDBC> <vhydaiavm-03> <osb_server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6751713a0ce9f61d:-6e70b631:12d02855fef:-7ff4-0000000000000002> <1292827466688> <BEA-001128> <Connection for pool "EBS_DHAARA_DataSource" closed.>

How to disable query-string evaluation in OSB proxy service?

OSB 10.3 proxy service evaluates the query String ?WSDL (are there more such parameters?). Usually the assigned WSDL will be returned this way.
I want to use OSB as simple HTTP-proxy. There is no WSDL assigned. The proxy service should simply pass all parameters to the request pipeline. This works fine for parameters in general but not for WSDL. This produces the exception below.
Does anyone have an idea how to disable this query string evaluation within OSB proxy service?
Thanks
Daniel
<25.11.2009 15:43 Uhr MEZ> <Error> <WliSbTransports> <BEA-381304> <Exception in HttpTransportServlet.service: java.io.IOException: This service is not associated to a wsdl
java.io.IOException: This service is not associated to a wsdl
at com.bea.wli.sb.transports.http.ResourceRequestProcessor.securedInvoke(ResourceRequestProcessor.java:108)
at com.bea.wli.sb.transports.http.ResourceRequestProcessor.process(ResourceRequestProcessor.java:61)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.handleMetadataRequest(HttpTransportServlet.java:314)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:215)
at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Daniel,
http://hostServer/contextpath?WSDL is common way of retrieving WSDL for service whcih supports one. The case you are suggesting is if the service does not have any wsdl associated, then it is good practice that caller be notified appropriately which is being done by OSB. OSB is indicating that the service for which we have used ?wsdl has no wsdl associated.
I guess there is no way we can disable this feature for un-typed OSB services (services which doesn't have wsdl associated). Any reason why would we don't want exception when '?wsdl' is used?
Manoj

Not receiving MQ custom header (PutDateTime) in OSB Proxy service using MQ

Hi,
I am using OSB 11g and Websphere MQ version 7.0.
I am trying to get PutDateTime header of message which is being polled from MQ through OSB proxy service using MQ transport.
While logging inbound variable i found out that except this put date time header i am getting all other headers.
Please suggest me something to get this header also.
Regards,
Naveen

Hi Anuj,
I am using OSB 11.1.0.3 version.
By MQ client libraries, do you mean com.ibm.mq jar? i have this jar file put in lib section of my OSB home.
Its really happening like when i am trying to log inbound variable for MQ request headers i am not getting put date time in that.
####<Sep 23, 2011 1:40:34 PM IST> <Error> <ALSB Logging> <wcrbtcsinbom222> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <647137b87487c06a:2875c7c7:13290bb7c1c:-8000-000000000000238b> <1316765434885> <BEA-000000> < [RouteToJMSQueue, null, null, REQUEST] inbound>>>>>>>>>>>>>>>: <con:endpoint name="ProxyService$CSPSPrj$EBooking$ProxyServices$AT_MQFrontRunner" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service/>
<con:transport>
<con:uri>mq://CSPS_GCS_DEV_TST?conn=CSPSPrj/EBooking/Utils/MQConnectionResource</con:uri>
<con:mode>request</con:mode>
<con:qualityOfService>exactly-once</con:qualityOfService>
<con:request xsi:type="mq:MQRequestMetaData" xmlns:mq="http://www.bea.com/wli/sb/transports/mq" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="mq:MQRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<mq:AccountingToken>FgEFFQAAACrQN1yT42JIgoumKNeOEgAAAAAAAAAAAAs=</mq:AccountingToken>
<mq:ApplicationIdData></mq:ApplicationIdData>
<mq:ApplicationOriginData></mq:ApplicationOriginData>
<mq:BackoutCount>0</mq:BackoutCount>
<mq:CharacterSet>1208</mq:CharacterSet>
<mq:CorrelationId>AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA</mq:CorrelationId>
<mq:Encoding>546</mq:Encoding>
<mq:Expiry>-1</mq:Expiry>
<mq:Feedback>0</mq:Feedback>
<mq:Format>MQSTR</mq:Format>
<mq:GroupId>AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA</mq:GroupId>
<mq:MessageFlags>0</mq:MessageFlags>
<mq:MessageId>QU1RIENTUFNfR0NTX0RFVsqwcE4gEaMC</mq:MessageId>
<mq:MessageSequenceNumber>1</mq:MessageSequenceNumber>
<mq:MessageType>8</mq:MessageType>
<mq:Offset>0</mq:Offset>
<mq:OriginalLength>-1</mq:OriginalLength>
<mq:Persistence>0</mq:Persistence>
<mq:Priority>0</mq:Priority>
<mq:PutApplicationName>re MQ\java\jre\bin\javaw.exe</mq:PutApplicationName>
<mq:PutApplicationType>11</mq:PutApplicationType>
<mq:ReplyToQueueName></mq:ReplyToQueueName>
<mq:ReplyToQueueManagerName>CSPS_GCS_DEV_QM</mq:ReplyToQueueManagerName>
<mq:Report>0</mq:Report>
<mq:UserId>SACRBTCSDEFR</mq:UserId>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:transportClient>
<con:username><WLS Kernel></con:username>
</con:transportClient>
</con:security>
</con:endpoint>>

OSB Proxy service request is echoed

Hi All
When I test my OSB proxy service, the request is being echoed back and the invocation trace just shows "No Service has been invoked, the request is echoed". I have created a Business service for my BPEL process and this is working fine. Only problem is when invoked from the proxy. The call is not even going to the BS. And there is no authentication or security policy attached to any of my services. Can someone please help?
Also, when I put the endpoint of the proxy service into my browser, it shows a Forbidden-403 error
The log file shows access denied exceptions. The trace from the log file is
Failed to process request message for service ProxyService OracleEbizProductServices/ProxyServices/GetOracleProductInventory: com.bea.wli.sb.security.AccessNotAllowedException com.bea.wli.sb.security.AccessNotAllowedException at com.bea.wli.sb.pipeline.RouterSecurity.doAccessControl(RouterSecurity.java:136) at com.bea.wli.sb.pipeline.RouterSecurity.doAccessControl(RouterSecurity.java:117) at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:586) at
Any suggestions on what's going on?
Thanks in advance
Raja

Hi
We saw a similar issue in our environment. Suddenly all the proxy services were denying access. This happened after an IP address change on the servers running WLS Admin and OSB.
By clearing all the temp/cache files on both servers, and ensuring that the WLS Authentication Setting did not 'cache' results we were able to resolve the problem. Obviously we needed to restart the WLSAdmin and OSB managed servers as well.
Hope this helps.
Thanks

OSB Proxy service replying null.

Hi,
I am trying to invoke a OSB proxy service from a third party tool(SOAPUI). I am getting null as response. But I can see the response in OSB test page.Please help.
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<sch:issueMaterialService xmlns:sch="http://www.morrisonsplc.co.uk/meatpoc/schema">
<sch:UserName>string</sch:UserName>
<sch:ResponsibilityName>string</sch:ResponsibilityName>
<sch:BatchNumber>string</sch:BatchNumber>
<sch:ItemNumber>string</sch:ItemNumber>
<sch:Quantity>1.051732</sch:Quantity>
<sch:UOMCode>string</sch:UOMCode>
<sch:LotNumber>string</sch:LotNumber>
</sch:issueMaterialService>
</soapenv:Body>
</soapenv:Envelope>
Response Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header/>
<soapenv:Body>
<sch:issueMaterialServiceResponse xmlns:sch="http://www.morrisonsplc.co.uk/meatpoc/schema">
<sch:TransactionId/>
<sch:SecondaryWIPIssueQty/>
<sch:SecondaryWIPIssueUOM/>
<sch:Messagecount>1.0</sch:Messagecount>
<sch:MessageList>Error while setting the context</sch:MessageList>
<sch:LotNumber>string</sch:LotNumber>
<sch:Status>E</sch:Status>
</sch:issueMaterialServiceResponse>
</soapenv:Body>
</soapenv:Envelope>

It's strange!!! If you are getting response on test console then definitely SOAPUI will also get the response. Are you sure that it is OSB which is not sending response and it is not a problem with SOAPUI?
Let us know your proxy configuration detail.
Regards,
Anuj

OSB proxy services:singleton?

Are OSB proxy services singleton in nature! That means if 10 requests are fired for the proxy, does only one instance of proxy service process them one by one or multiple instances will process requests in parallel?

From processing perspective OSB is multi-threaded by default however for few transports, pollers are singleton. You may refer section "3.2.2.1 Singleton Resources" at -
http://docs.oracle.com/cd/E21764_01/doc.1111/e15022/cluster.htm#i1387638
Regards,
Anuj

Consume JMS Unit-Of-Work message through OSB proxy service

Hi,
Anyone know how to consume a JMS Unit-Of-Work (UOW) message using an OSB Proxy Service of JMS type?
I can submit a unit-of-work JMS message (which consists of multiple constituent messages) using an OSB proxy & business service combination and setting the UOW transport headers appropriately. I can also separately produce and consume Java objects via a JMS queue where the consumption is done via OSB proxy (of java request message type), but these aren't UOW messages.
Apparently as soon as it is a UOW message then the message consumed is an ObjectMessage ArrayList and one has to use the "Java" request message type for the JMS consumer proxy, but I'm unsure of how to create the concurrent client jar to use it in the same proxy service's JMS transport configuration in order to output the ObjectMessage ArrayList (UOW message).
Ideally I'd like to consume a single UOW XML message via an OSB JMS proxy service.
Any pointers would be appreciated.
R

Finally got this working!!
For posterity: Needed to insert Java Object JMS messages on the OSB JMS producer (Business Service) side with correct UOW jms transport header set in route node. Then consume the Unit-Of-Work message on the other side via jms proxy service with "java" request message type, with appropriate jar containing the Object class as the "Client jar" in the JMS Transport configuration. In the same JMS consumer proxy I had to do a java callout, passing the contents of $body, using java.util.ArrayList and javax.jms.ObjectMessage, as input into a method (.. decodeJavaMessage(ArrayList<ObjectMessage> ...)). In this java callout class you can get to each individual ObjectMessage via typecasting the get() method on the Arraylist to (ObjectMessage) and then just typecast the getObject() on this Objectmessage into your original Java Class (same as what you inserted onto queue originally).
Hope this saves someone some time in future!

OSB proxy service Calling OSB proxy service from BPEL

Dear team,
Wehave a requirement to call a Wsdl based OSB proxy service with sb protocol from SOA Composite from BPEL process.
We created a wsdl based OSB proxyservice with sb protocol and deployed to OSB development server.
We tried to export the wsdl and corresponding xsd files. sbconfig.jar got created.
When we extracted the sbconfig file and placed the wsdl and xsd into the SOA composite.
When we are trying to create a partnerlink, that OSB proxy service wsdl is not showing up.
Please suggest.
How to call OSB proxy service from BPEL..

Hi,
Here either you need to change the protocol from 'sb' to http or use the Direct Binding in soa-composite.
please refer this links:
Can a business service call a proxy service in OSB
http://biemond.blogspot.in/2009/03/calling-osb-services-from-bpel.html
BPEL to OSB using sb transport protocol
Thanks,

Configuring Active Directory user to Authenticate against OSB proxy service

Hi,
I applied the oracle Predefined auth.xml WS-policy to the osb proxy service and that will query a web service that is running on separate weblogic server, and I configured ActiveDirectory as an Authentication Provider in the weblogic server under myrealm. when I pass the weblogic/weblogic which is an admin account in the OSB test console or soap ui to test the authentication works and I get the response back but when I pass in one of the Active directory username/password I'm getting the following Failed to assert identity with UsernameToken SOAP fault.
Do I have to change or add any configuration In the weblogic server to make this work? such as Identity Assertion provider in the weblogic server.
fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
<con:reason>
A web service security fault occurred[{http://www.w3.org/2003/05/soap-envelope}Sender][Failed to assert identity with UsernameToken.]
</con:reason>
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soap="http://www.w3.org/2003/05/soap-envelope">soap:Sender</err:faultcode>
<err:faultstring>
Failed to assert identity with UsernameToken.
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
Regards
Vick

Hi Manoj
I have configured the weblogic server to use the Active Directory Authentication provider which is supported in weblogic server and I can see the AD users under weblogic console under users and groups tab, but if I pass in the username/password of the users in AD I'm getting the above error.
thanks
Vick

Adding Jax-RPC Handlers to OSB Proxy Service

Hi All,
I am new to OSB and wanted to know if I can add a Client side (My proxy Service -> external business service) Handler chain to OSB Proxy Services. I know how to add handlers to general webservice. But is there any way to intercept the request by adding handlers to OSB proxy service before it goes to business service?
Any help is highly appreciated.
Thanks,
Swetha

Hi Eric,
Thanks for your response. we are trying to access WSRR( manages end point urls for 7 different environments) and generate the end point dynamically at the design time. As we figured out WSRR is not compatible with OSB we are trying to implement these client side (OSB Proxy service) handlers which would get the dynamic endpoint depending on the environment used. I was able to create the handlers for this and set the jar in the classpath but the client service which should be using these handlers have to have these handlers defined in the deployment descriptor(web.xml) which am unable to see with a OSB project.
Will there be a deployment descriptor(web.xml/webservices.xml) associated with Proxy services on OSB? Or Is there any other way to add custom JAX-RPC Handlers to a proxy service? Or is there any way to connect to WSRR directly?
Thanks,
Swetha

XSLT transformation in OSB Proxy Service

Hello, I am trying to modify the answer from a WebService using an XSLT transformation in an OSB Proxy Service, but I am unable to do so. Here it is the content of the answer's body it receives:
<ns0:getRecountUnitMovementsResponse xmlns:ns0="http://www.grifols.com/gds/interfaces/types/">
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>4</ns4:GrpId>
<ns4:MovementType>960</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>10</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>1</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>15</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>2</ns4:GrpId>
<ns4:MovementType>913</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>21-00001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>25</ns4:Quantity>
</ns1:result>
<ns1:result xsi:type="ns4:VO_PR_UnitsMovementsSDO" xmlns:ns1="http://www.grifols.com/gds/interfaces/types/" xmlns:ns4="/com/grifols/gds/webapp/inventoryCount/units/queries/common/" xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:typ="http://www.grifols.com/gds/interfaces/types/">
<ns4:GrpId>3</ns4:GrpId>
<ns4:MovementType>959</ns4:MovementType>
<ns4:DcCode>165</ns4:DcCode>
<ns4:RecDcCode>165</ns4:RecDcCode>
<ns4:UnitItemNumber>11-0001</ns4:UnitItemNumber>
<ns4:RecUnitItemNumber xsi:nil="true"/>
<ns4:Bol xsi:nil="true"/>
<ns4:CustomerId xsi:nil="true"/>
<ns4:DocumentDate>2011-01-01T09:00:00.0+01:00</ns4:DocumentDate>
<ns4:PostingDate>2011-01-01T09:00:00.0+01:00</ns4:PostingDate>
<ns4:MovStatusCode>SE</ns4:MovStatusCode>
<ns4:Quantity>50</ns4:Quantity>
</ns1:result>
</ns0:getRecountUnitMovementsResponse>
And what I am trying to do is replace all the "/com/grifols/gds/webapp/inventoryCount/units/queries/common/" for "http://www.something.else". I have succeeded replacing it if the attribute name is "xmlns" instead of "xmlns:ns4". However, that ":ns4" changes everything and I can't get it to work. Does anyone know how to do so?
Thank you in advance. Don't hesitate to ask me for more information you may need.
Jordi

By the way, this is the XSLT transformation that works fine if we remove that ":ns4" from the attribute name:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:source="/com/grifols/gds/webapp/inventoryCount/units/queries/common/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
version="2.0">
<xsl:output method="xml" encoding="iso-8859-1" indent="yes"/>
<xsl:template match="source:*">
<xsl:element name="{local-name()}" namespace="http://www.something.else">
<xsl:apply-templates select="@*|node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>

How can we call a OSB proxy service from a BPEL process?

Hi,
I want to call a OSB proxy service from a BPEL process. Can you please explain me the procedure?

Get the wsdl of the OSB proxy service and create webservice parnerlink in BPEL based on this wsdl to invoke the service
To form the wsdl url, copy the Endpoint URI configured to the proxy service(just click on the proxy service in the console) from the sbconsole - /ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService
Pre append <<protocol://OSB Hostname:OSB Port>> - http://localhost:8000/ and post append with ?WSDL
The final WSDL url look like - http://localhost:8000/ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService?WSDL
Regards
Albin I

Handling Transport Errors in OSB Proxy Services

Similar Messages

Maybe you are looking for