Has anyone tried M-Audio ProjectMix IO with Logic?

Has anyone tried M-Audio ProjectMix IO with Logic?
I know M-Audio's drivers have had issues, but it looks interesting.

The Fishman Triple Play is simply the best hardware option to date for triggering external MIDI whether hardware sound modules or software instruments.
Having used many MIDI guitar converters since '89, I can say that the FTP tracking is very accurate and velocity dynamics are reasonably wide from soft to loud.
The Triple Play app works in Stand Alone mode in OSX 10.7.5 but not in 10.8.3.
In 10.8.3, you load the Fishman Triple Play plug-into into the I/O of a software instrument track. Open the app and adjust sensitivity, mono vs poly, transposition down or up an octave, etc. Save your set ups as presets which can be scrolled through with the D-Pad control on the converter.
While the GR-55 is an amazing all-in-one solution in a small, light weight package (in relation to the bulk and weight of several actual guitars, basses, amps, fx, etc), it is a poor choice for triggering external sound sources. Whereas I can play "bass" lines on the open E and A strings with my now obsolete Roland GI-20 and RMC piezo equipped guitar without any sense of latency, the GR-55 latency was simply intolerable. Of course one could revert to the old strategy of playing parts an octave higher on the fret board to increase speed and accuracy of tracking. But what about playing "piano" with fretted triads against the open E or A strings???
Think I'm full of hot air? Skim through this: http://www.joness.com/gr300/MIDI_SPEED.htm
I traded my GR-55 towards a JTV-59.
Once set up, you're gonna love the FTP. As I mostly sequence MIDI in Logic, being wireless is incredibly convenient.
Message was edited by: CC#11

Similar Messages

Has anyone tried drawing on the iPad with a stylus?

I have tried the Jukestyle iPad stylus to draw signatures on the iPad. Has anyone else tried an iPad stylus to use for signatures on documents and contracts? Which ones do you prefer?

OK I do not have a Lexus, but I have a 2004 Prius with Nav and Bluetooth and as I understand it the Bluetooth is the same. It took me like 45 seconds to do it. I did not touch a manual. Go to the phone and then the set up. In my car it gives you the default password. Go to the settings-> Network -> Bluetooth on the iPhone type in the password and you are in. Uploading you phone book is another issue but can be done from you Mac or PC with Bluetooth or with a older Bluetooth phone.

Has anyone tried 1080/60p or 50p with updated version?

I was told that FCPX could not properly import (without help) 1080 60&50p fotage.
Anyone tried with 10.0.1?
Thanks
Jack

Hi Tom,
In my note I wrote "Can not import...." rather than the "edit" part of the equation.
I have used ClipWrap and the clips are then imported correctly.
One needs however to check the "Convert Audio to LPCM", otherwise you got no sound.
I have used Sony NEX-5N in 1080 50p (PAL) format.
However, I have not heard of any modern cameras that successfully "importing" natively from the card in 1080 (60/50p) in FCPX.
I knew this was the case with 10.0, but thought that Apple would fix this with the lastest upgrade.
Being unsure if it was my setup (Mac and/or camera) was the problem or was it really FCPX which could not do it, I simply reached out to the Mac community to get some feedback.
Although there is a trial version for free (for 1min clips or less) the software costs 49:- bucks.
That is is a lot of money and "disturbs" my workflow, hence my disappointment.

Has anyone used the 3M Ergonomic Mouse with Logic?

I'm particularly interested in whether:
(a) the *scroll function* works with Logic, and
(b) does the simple, non-programmable 3-button design hinder the functionality of Logic?

I am a big fan of mice with many options, and while I have never used a blue tooth mouse before, I do have a Logitech MX1000 mouse that I use for my Powerbook, and I love it. I originally used it for my PC, but when I picked up the new laptop, I just setup the PC with the older MX700 which I also love, and used the laser mouse on the laptop. Either way, I am sure anything with more than one button or the really ridiculous Mighty Mouse from APPLE will be better than a trackpad for any serious use.

Has anyone tried editing an iWeb site with Contribute or Dreamweaver?

Before iWeb, I liked using Adobe Macromedia Contribute to edit the.Mac homepages. I've been giving iWeb a spin, and it seems to occupy the same place in Apple's stable as the rest of its siblings — a pre-pubescent version of Contribute, which is a subset of Dreamweaver.
I haven't yet tried it, but it seems as if the iWeb templates would be a good starting point, and Contribute/Dreamweaver would be great tools to polish the site.
I'm still confused, though, as to what the .Mac WebDAV URLs are...that's the thing that always tripped me up. Dreamweaver 8 is a better at site management, it seems, but if anyone could post a "definitive" guide on using a third-party tool, it would be much appreciated.

yes you can use other websoftware to modify iweb sites either after it is on the webserver or if you save it to a folder before publishing.
I tried the demo of Dream weaver and it worked fine..also I used Rapidweaver which works too. Heck you could use anything that can edit HTML which is really just a text file.
The problem with iweb is it is using those stupid PNG files which are big and to make it worse it duplicates all your images rather than having them in a shared folder you can end up with dozens of the same image which when someone visits your site and changes pages it has to download the same image again!
pretty crazy stuff.
iweb looks nice and as long as people are viewing it with broadband you'd be ok but dialup users are "toast" even on a simple site.
I got the demo of rapidweaver which is not as intuiative but in someways is more complete and have done a 3 page site.. others are developing themes for it and also there are plugins which add alot of functionality.
at $35 USD it is cheap and if you go to http://www.screencastsonline.com there are 3 videos to show you how to use it and a discount code.
I personally thing iweb is great but has some design flaws that will need to be delt with.

Has anyone tried to pair the iphone with a 2006 Lexus GX470?

before opening the package I would like to know if anyone has been able to use the bluetooth capabilities of the iphone with a 2006 Lexus. Was you able to pair the phone to the car's bluetooth technology?

OK I do not have a Lexus, but I have a 2004 Prius with Nav and Bluetooth and as I understand it the Bluetooth is the same. It took me like 45 seconds to do it. I did not touch a manual. Go to the phone and then the set up. In my car it gives you the default password. Go to the settings-> Network -> Bluetooth on the iPhone type in the password and you are in. Uploading you phone book is another issue but can be done from you Mac or PC with Bluetooth or with a older Bluetooth phone.

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?

I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.

It worked, for about $860 I now have a 1.8 TB xServer

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Apple should really come up with a dual sim card. Has anyone tried to use the dusl simcard adaptor?

I see many ads for the dual sim adaptor, also it is being sold on some flights. Has anyone tried one? Instead of putting better cameras on their iPhones, Apple should really concentrate on making a phone with dual sim cards ( without asking exhorbitant prices) which will make travelling so much easier.

Tell Apple:
http://www.apple.com/feedback/iphone.html

Has anyone tried DisKWarrior V4.2 with Snow Leopard V10.6.3? Does it work?

Has anyone tried DisKWarrior V4.2 with Snow Leopard V10.6.3? Does it work?

Well, there is an article on MacWorld saying there were a lot of changes and improvements to Disk Utility.... and those have a way of impacting things.
I got surprised to have trouble after 10.6.3 with SuperDuper on two different systems, that I am still scratching my head over, but had to use Carbon Copy Cloner and RESTORE in Disk Utility for now, would crash (sent report to both) as soon as SD began.
TechTool Pro 5 is another that sometimes needs to take a couple weeks to see if they need an update and validate against the final shipped build.

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

Has anyone tried the new retina display MBP with a projector?

I bought a new MacbookPro with retina display online the other day (hasn't arrived yet). I use this primarily for business doing presentations etc. Has anyone tried connecting a projector using the Thunderbolt VGA adapter? Just curious if it'll work.
Thanks

Similar problem. I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

Has anyone tried Thunderbird with Mavericks?

Given that Mail is so completely useless at the moment, has anyone tried Thunderbird under Mavericks?

Hi mmollo22. I use an external monitor with my iMac - Dell U2412 connected via RGB
Mail window on Dell - Reply window appears then almost immediately disappears UNLESS
                                        1) Full screen mode
                                        2) Pre-existing Reply window exists and is visible
Mail window on iMac - Reply window appears on Dell regardless of pre-existing windows. Full screen mode reply
window appears on the iMac.
Others are having Gmail difficulties. I haven't tested mine thoroughly yet, but it seems unaffected, which would also be strange.

Has anyone tried to use Labview with VNC

I am trying to use VNC viewer and Labview to remotely code/control labview application. Lots of right clicks dont show up on the VNC. I guess this happens only for Labview and not for other applications. Has anyone tried to use VNC before? is there a workaround?

Just confirmed that each of the above items works properly in our setup, using either WinME or Linux as the controller of the Win98 host. In the 'Connection Options' screen of the controlling computer I have only 'Auto-Select' and 'Emulate 3 buttons' checked. 'Current User Properties' on the controlled computer has only 'Accept Socket Connections', 'Do Nothing', 'Remove Desktop Wallpaper', 'Poll Foreground Window' and 'Poll Console Windows Only' checked. Hopefully one of the above will make a difference.
Matt

Has anyone tried M-Audio ProjectMix IO with Logic?

Similar Messages

Maybe you are looking for