Have had crashes with one computer but not another. one that crashes has adobe flash payer 15 active x installed. should I uninstall it

I have two dell computers - one with 7 and one with 8. have numerous crashes on 7 but not 8. noticed Adobe flash player 15 active x is installed on 7 but not 8. is this the problem. should I uninstall it?

It’s very sad, but many of the software down-loaders / installers will trick you
into installing not only their program, '''but other programs as well'''.
You have heard of the '''fine print in shady contracts''', right? Well, some
installers you need to look at the '''itsy bitsy teeny weeny fine print'''.
You are thinking you are giving the installer permission to install the program
you want by using the '''recommended''' option. But if you use the
'''Manual Option Instead''', you discover all kinds of stuff that
'''you do not even know what it is or what it does'''. From now on,
everyone needs to '''Use The Manual Option''' to put a stop to this.

Similar Messages

Theme will install on one computer but not another one both have 4.0b6

The PC OS is Windows 7 Home Premium and the Laptop is running Windows 7 Ultimate. The Glowygreen theme works on the Laptop but not on the PC.

1- take a look at the jar part of the java tutorial here http://java.sun.com/docs/books/tutorial/deployment/jar/
2- make sure you've imported all the libraries (.jar and .dll). See http://java.sun.com/docs/books/tutorial/deployment/jar/downman.html
3- make sure you've specified an entry point of your program. See http://java.sun.com/docs/books/tutorial/deployment/jar/appman.html
hth

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

Store credit shows up on one computer, but not another

Happy Easter everyone,
I was wondering why my store credit shows up on one authorized computer, but not another? Is there a way to fix this? Or will I just have to make my purchases on that computer?
Thanks
Jason

An account's balance should show wherever you use the account (computer's iTunes, and in the App Store, iTunes store and iBookstore on iOS devices). Have you tried logging out and back into the account on the computer that it's not showing : Store > Sign Out menu option, that will then change to a Store > Sign In option (my balance has sometimes been slow to update on my computers/devices)

Problem with SMTP from one computer but not another

I have an iMac connected directly to my network via Ethernet and a MacBook Pro which connects via wireless. I have a program installed on my iMac that sends me alerts via e-mail, and it works just fine. When I try and use Mail, however, on my MBP with the exact same settings and credentials, it fails. To make this even more perplexing, Mail works fine from my office on a different network.
To work around this, I use Comcast's SMTP server on my laptop, but why would my regular e-mail provider's SMTP work on one machine and not another on the same network? The only difference is one is connected via Ethernet and the other by wireless.
I use a Time Capsule as my router and wireless access point. Has anyone got an idea about what's causing this?

Please report the relationship, if any, of the "regular e-mail provider's SMTP" and your ISP? If Comcast is your ISP, they regularly block use of Port 25, but if you have selected Use Default Port in Mail Preferences/Accounts/Account Information for the Outgoing Server, then it may be making the wrong choice to work with Comcast. Regardless of the ISP, for this regular account click on the arrows beside the name of the SMTP, choose Edit Server List, then click on the Advanced Tab that will then be seen and choose Use Custom Port, then enter the proper port directly -- that port is probably Port 587, but that could depend on the advisory of the email provider for using their SMTP.
Ernie

Login to Mail from one computer but not another.

I'm actually posting this on behalf of a senior Gent. We can login to his account from his main computer but not from his 'new' laptop. I've been helping him set it up (win7).
Message says wrong password and try again in 15 mins.
I logged into my account on the laptop ok. Using Chrome. I appreciate info is a bit sparse but just wondered if this rings any bells. Router has been re-set. I'm just of to try it IE, though it shouldn't make any difference. Thanks!

Have you tried resetting the password. Thentry logging in with the laptop 1st and check over the webmail settings - I don't use BTs webmail since I thinks its er ... poor (to be polite) but a pwd reset and new login from a new device has been suggested elsewhere here.

Able to interact with a cRIO remote front panel from one computer but not another

I have a cRIO application that publishes a remote front panel for monitoring and control of the application. From one PC (Win7 & firefox) I can see, interact and control the cRIO through the published remote front panel. From a second PC, also Win7, I can see and monitor the cRIO's state, but the remote panel that is opened does not allow for any interaction and this is true whether I'm using IE, FF or Chrome as the browser. When either PC is connected to the cRIO, it is via a dedicated Ethernet link and only the cRIO and the one PC are on that network. For this two-device private network, the PC is always at address 192.168.1.1 while the cRIO always uses 192.168.84.199 (port 8000).
The firewall rules on both PCs are setup to allow all incoming and outgoing programs/ports/protocols to be used between these two IP addresses.
Both PC's have up-to-date LabVIEW development systems installed on them (which more or less guarantees they have the minimum require LV runtime needed to see and use a remote front panel).
What might be different on the PC that view but cannot interact with the remote panel?
Solved!
Go to Solution.

Sam_Sharp wrote:
Right click on the second one and select "take control of this VI".
As far as I am aware - only one viewer of the remote front panel can control the panel at any time - the rest can only view.
As I tried to say in my original post, there was only one host physically connected to the private network at any given time (by virtue of the fact that the one Ethernet cable connection to the private network was being moved back & forth between the two hosts) so there was no way both hosts could be trying to control the cRIO at the same time. I even went so far at one point of restarting the cRIO while it was connected to the problem host to see if would render it functional, but it did not.
But I did not know that it was possible to do what you suggested, much less that there was a right-click context menu associated with a remote panel, so I tried it and it worked! Thank you!

Flv option showing up on one computer but not another.

at work on one computer the flv option in Compressor shows up when i add a "QuickTime export Component preset." however, it doesn't show up on one of the other computers. I don't remember if i did anything to get the flv option available in the first place. so i'm wondering if any body knows why it's not on the other computer. Do i not have the right version of flash on the computer?

Thank you I was having the same problem...I had an export to flash working.. then I had to reformat.. and not it is gone.
so I copied all the missing component ( FLV and a few others) however they are not showing up in compressor.

IPod Mini says must restore on one computer but not another

I have two computers. The one where most of my music is stored is running Windows XP. Each time I plug in my iPod it says I must restore it. I do this and it still says I must restore it again. I have tried a different cable but no success. When I connect same iPod to Windows Vista computer (has very little of my music) it connects fine. Any ideas?

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive

Attachments -- why can I drag them off on one computer but not another??...

Hello -- I have two different Mac Pro's, an iBook and a Snow iMac. (Everything running OS X 10.5.7 except the iMac is 10.3.9.) On most of the computers, when I look at an email in Mail that has an mp3 attachment, I can just click-and-drag it right onto the desktop, no problem. But on ONE Mac Pro I get the annoying message about "Do you want to download this?", so I click Download, and most of the time it does not download, though sometimes it will & iTunes opens up. BUT, I would prefer to just drag the attachment out of the email. I can't seem to find a Pref to tweak... Anybody got a solution for this annoyance? Thank you very much in advance.

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

ITunes / Gracenote recognized audio cds on one computer but not another!

What tha....I was importing purchased retail cds (albeit old ones) on my iMac Intel OS 10.4.11 + iTunes 9.0.2.(25) and Gracenote recognized the artist, album cover & tracks no problem. Then I tried importing the same cds onto our MacBook (Intel) using SAME (seemingly) software: OS 10.4.11 + iTunes 9.0.2 (25) and I got the message, "This CD was not found in the CDDB database." If that is the case, what database was the iMac querrying? This has happened to 3 George Howard cds so far.
Anyone come across this problem? Any advice?

I have also had "recognition" problems with CDDB Gracenote.
The latest, incredibly, was a Sinatra CD entitled "Where are you?" - one of his classics, which I can clearly see on the Gracenote website Capitol CDP 7 91209 2.
I have sent feedback to: http://www.apple.com/feedback/itunesapp.html
and suggest others do the same - eventually the message gets through !

Time Capsule visible to one computer but not another

I want to use Time Capsule for Time Machine backups of my MacBook Pro, running 10.5.2, and manual backups from my PowerBook, running 10.4.11. Everything is hunky dory for the MBP, but the PB cannot see the Time Capsule - meaning, the Time Capsule is not visible from the finder. I've tried looking for it using Go to Network, Disk Utility, and every other way I could think of. Both computers are on the same wireless network and can see each other. File Sharing is enabled on the Time Capsule. What am I missing?

I used the Airport Utility to enable file sharing for each of my 3 Macs before connecting them. I don't know if this is necessary but I didn't have any problem
Go to Airport Utility - Disks - File Sharing (click file sharing and enter credentials for each computer l, select read and write access)

Airport connecting to one computer but not another

Just set up my AirPort Extreme. It worked immediately on my Mac. When I went to set it up on another Mac the AirPort Extreme Utility could not find the base station when it scans and when I go to join the network using the AirPort icon on the top bar it allows me to click on the station but after I enter the password the OK button does not highlight itself so that I can click on it.
Please help.

I used the Airport Utility to enable file sharing for each of my 3 Macs before connecting them. I don't know if this is necessary but I didn't have any problem
Go to Airport Utility - Disks - File Sharing (click file sharing and enter credentials for each computer l, select read and write access)

Can signon with one account but not another one

Been using iChat for years, the other day I installed both Adium and Fire but neither of them would signon my main AIM account but would signon my secondary AIM account. NOW, though, iChat refuses to signon my primary AIM account either! The only way to signon with that account is to use the AOL IM application, it signs on flawlessly. Password IS correctly entered, just the one AIM account won't authenticate.
I deleted iChat prefs, ran Cocktail, turned off the firewall, still no joy.
Ideas?

Hi ClarkDV,
In iChat prefernces > Accounts section
Is the tick box to Allow Multiple logins of the account name actually ticked ?
Do Adium and Fire have similar settings ?
Ralph

Smart mailboxes work on one computer but not another

I have an Macbook Air I use for work and I have setup smart mailboxes which work fine. On my personal Macbook Pro the smart mailboxes show up that I created on my Air but nothing shows up (of course). When I create a smart mailbox on my Pro it doesn't work. I no longer have iCloud mail synching to my Air and that did not make a difference.
How can I get smart mailboxes to work on my Pro?

Could it be a permission problem?

Have had crashes with one computer but not another. one that crashes has adobe flash payer 15 active x installed. should I uninstall it

Similar Messages

Maybe you are looking for