Have i missed any archive log in Standby setup?, im unable to find
Dear All,
I setup standby in Oracle10g.
In my Primary the archive log list shows as
primary>archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\STANDBY\Archive
Oldest online log sequence 30
Next log sequence to archive 32
Current log sequence 32
In my standby the archive log list shows as
standby>archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\PRIMARY\Archive
Oldest online log sequence 31
Next log sequence to archive 0
Current log sequence 32
Have i missed any archive log file?
But in my archive location of the primary i found the archive files from ARC00002_0633898426.001,ARC00003_0633898426.001 to ARC00031_0633898426.001
and in my archive location of the standby i found the archive files from
ARC00002_0633898426.001,ARC00003_0633898426.001 to ARC00031_0633898426.001 and one more extra archive file ARC00032_0633898426.001.
I am getting confused from where i got the archive file ARC00032_0633898426.001 in standby only which is not in primary?
Please clarify this...
Please let me know abiut the above issue, i will be thankful to you.
Similar Messages
-
How to delete archive log on standby site
hi
i configured dataguard on 10g. could anyone suggest how to delete archived log on standby site..Hi,
There is no automatic feature out-of-the-box but you have the following views:
1) Shows archive logs transfered:
select sequence#, first_time, next_time from v$archived_log order by sequence#;
2) Shows archive logs applied:
select sequence#, archived, applied from v$archived_log order by sequence#;
If you see your archivelogs applied you can safely remove archive log files from your disk. It is your decision if you keep or delete them completely. -
RMAN-20242: specification does not match any archive log in the recovery ca
Hi,
I'm working with an 9i Oracle RAC (yes, I know this version is out of support...). I'm launching my backup from node 1 with this script
run {
sql 'alter system switch logfile'
sql 'alter system archive log current'
allocate channel TSM1 type 'sbt_tape' connect *
parms='ENV=(TDPO_OPTFILE=/home/adsmadm/rman_INF01T01/opt/tdpo.opt)'
allocate channel TSM2 type 'sbt_tape' connect *
parms='ENV=(TDPO_OPTFILE=/home/adsmadm/rman_INF01T01/opt/tdpo.opt)'
backup
format 'brman_arch_%s_%p'
(archivelog like '/logs/bbdd/oracle/INF01T01/archiver/%' channel TSM1 delete input )
(archivelog like '/logs/bbdd/oracle/INF01T03/archiver/%' channel TSM2 delete input )
release channel TSM2
release channel TSM1
And fail with this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/13/2012 22:36:43
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20242: specification does not match any archive log in the recovery catalog
I've take a look to the archives directories and both nodes have archives:
ora10g:/opt/ora10g > ls -lrt /logs/bbdd/oracle/INF01T01/archiver
total 97896
-rw-r----- 1 ora10g dba 2048 Aug 13 22:36 T0001S00000061440648489222.ARC
-rw-rw---- 1 ora10g dba 38132224 Aug 13 22:36 T0001S00000061430648489222.ARC
-rw-r----- 1 ora10g dba 11984896 Aug 13 22:36 T0002S00000044040648489222.ARC
ora10g:/opt/ora10g > ls -lrt /logs/bbdd/oracle/INF01T03/archiver
total 392984
-rw-r----- 1 ora10g dba 49364992 Mar 24 2009 T0002S00000007020648489222.ARC
-rw-r----- 1 ora10g dba 49364992 Mar 25 2009 T0002S00000007030648489222.ARC
-rw-rw---- 1 ora10g dba 19314688 Mar 25 2009 T0002S00000007040648489222.ARC
-rw-rw---- 1 ora10g dba 4733952 Mar 25 2009 T0002S00000007050648489222.ARC
-rw-rw---- 1 ora10g dba 4608 Apr 09 2009 T0002S00000007440648489222.ARC
-rw-rw---- 1 ora10g dba 2541056 Sep 26 2009 T0002S00000015420648489222.ARC
-rw-rw---- 1 ora10g dba 49373184 Sep 28 2009 T0002S00000015430648489222.ARC
-rw-rw---- 1 ora10g dba 3410432 Feb 11 2010 T0002S00000018680648489222.ARC
-rw-rw---- 1 ora10g dba 599552 Feb 12 2010 T0002S00000018710648489222.ARC
-rw-rw---- 1 ora10g dba 6574080 Mar 03 2010 T0002S00000019200648489222.ARC
-rw-rw---- 1 ora10g dba 1663488 Mar 08 2010 T0002S00000019340648489222.ARC
-rw-rw---- 1 ora10g dba 431104 Apr 07 2010 T0002S00000020160648489222.ARC
-rw-rw---- 1 ora10g dba 13811712 Apr 19 2010 T0002S00000020460648489222.ARC
I've tried to made a crosscheck but, only found node1 archives:
RMAN> change archivelog all crosscheck;
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0001S00000061430648489222.ARC recid=10685 stamp=791246196
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0001S00000061440648489222.ARC recid=10686 stamp=791246196
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0002S00000044040648489222.ARC recid=10687 stamp=791246197
Crosschecked 3 objects
Any idea about the way to solve it?
Thanks in advance!
dbajugHi,
Connect to target through rman
crosscheck archivelog all;
Then re run the backup. This will work if those two locations provided are archive log destinations.
In case the issue still persists then
Connect to target through rman
catalog start with '/logs/bbdd/oracle/INF01T01/archiver/';
catalog start with '/logs/bbdd/oracle/INF01T03/archiver/';
Then re run the backup.
Thanks,
Vivek
Edited by: 952807 on Aug 16, 2012 5:21 PM -
RMAN-20242: specification does not match any archive log in the catalog
Dear Experts ,
My rman script is as follows :
4> run
5> {
6> allocate channel dev1 type disk format 'Z:\Rbackup\DMP\db_t%t_s%s_p%p';
7> allocate channel dev2 type disk format 'Z:\Rbackup\DMP\db_t%t_s%s_p%p';
8> backup database FILESPERSET 20 ;
9> backup archivelog until time 'sysdate-1' delete all input ;
10> release channel dev1 ;
11> release channel dev2 ;
12> }
The above script is run every day at 2 PM .
Today accidently I ran this script twice . The second run wiped out the dmp created first . In effect I lost all the archive logs of sysdate-2 to sysdate-1 . After this I took a full backup .
Now though I have a full back , I have lost 1 days archive logs .
Please tell me what are the consequences of this ?
Regards
Renjith MadhavanDear ckpt .. the rman-20242 error was in a different scenario ... (sorry for the heading ) ... The one i am talking abt now didnt give any error .. back up was successful ....
My question is what happens if I lost one days archive log though i have taken a full backup .... nothing will happen
but if you restore any old database, which before "archives deleted" later you cannot apply. because those are not exist...
but you have full backup then nothing to worry..
I know this depends on the business requirements .. but could you suggest from your experience a few consequences (generic)if already backed up and those archives not exist in OS.... there is no worries on business requirements..because it is already in RMAN repositry -
"specification does not match any archived log in the recovery catalog"
I would like to know about this message.
I Validated my backup and archivelogs yesterday.
Today when I tried to do - CROSSCHECK ARCHIVELOG ALL;
I gave me the following error -
RMAN> crosscheck archivelog all;
released channel: ORA_SBT_TAPE_1
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=291 device type=DISK
specification does not match any archived log in the recovery catalog
when I tried to list all the archivelogs then also I am getting this message -
RMAN> list archivelog all;
specification does not match any archived log in the recovery catalog
I have retention policy of 15 Days.
Waiting for your inputs.Thanks Werner..This means that it is just a message.
One more question related to Archive Log backups -
traditionally DBAs used to take backup of an Archivelog by spupplying "alter system archive log current" before taking the backup. somewhat like -
run
allocate channel t1 device type 'sbt_tape' PARMS="ENV=(TDPO_OPTFILE=/oracle/TESTDB/tdpo.opt)";
sql 'alter system archive log current';
backup archivelog all delete input;
release channel t1;
But, since RMAN automatically archives CURRENT redo log at the start of the archivelog backup, do we REALLY need to pass sql 'alter system archive log current'; before starting the archivelog backup in the script?
RMAN> backup archivelog all;
Starting backup at 11-MAR-10
current log archived ===========> RMAN automatically archived the CURRENT redo log
released channel: ORA_DISK_1
allocated channel: ORA_SBT_TAPE_1
related question to this is - Since it generates one archived log everytime it takes the archived log backup, this backup may get hung if the archived destination is 100% full. Is there any way we can take the archive log backup without generating an extra archived log before the start of the backup?
Thanks,
Roopesh -
Pecification does not match any archive log in the recovery catalog
MAN> list archivelog all;
pecification does not match any archive log in the recovery catalog
RMAN> list backup of archivelog all
BS Key Size Device Type Elapsed Time Completion Time
671197 5.17M DISK 00:00:03 29-MAY-11
BP Key: 671200 Status: AVAILABLE Compressed: YES Tag: TAG20110529T180030
Piece Name: F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110529_FVMDIGPU_S25087_P1
List of Archived Logs in backup set 671197
Thrd Seq Low SCN Low Time Next SCN Next Time
1 44836 503663671 29-MAY-11 503675934 29-MAY-11
2 22517 503663669 29-MAY-11 503675932 29-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
671232 5.12M DISK 00:00:02 29-MAY-11
BP Key: 671235 Status: AVAILABLE Compressed: YES Tag: TAG20110529T200050
Piece Name: F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110529_G1MDINRJ_S25089_P1
List of Archived Logs in backup set 671232
Thrd Seq Low SCN Low Time Next SCN Next Time
1 44837 503675934 29-MAY-11 503688661 29-MAY-11
2 22518 503675932 29-MAY-11 503688659 29-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
671267 5.14M DISK 00:00:03 29-MAY-11
BP Key: 671270 Status: AVAILABLE Compressed: YES Tag: TAG20110529T220036
Piece Name: F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110529_G3MDIUS4_S25091_P1
List of Archived Logs in backup set 671267
Thrd Seq Low SCN Low Time Next SCN Next Time
1 44838 503688661 29-MAY-11 503701009 29-MAY-11
2 22519 503688659 29-MAY-11 503701007 29-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
671302 16.55M DISK 00:00:05 30-MAY-11
BP Key: 671305 Status: AVAILABLE Compressed: YES Tag: TAG20110530T000048
Piece Name: F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110530_G5MDJ5TG_S25093_P1
List of Archived Logs in backup set 671302
Thrd Seq Low SCN Low Time Next SCN Next Time
1 44839 503701009 29-MAY-11 503716961 30-MAY-11
2 22520 503701007 29-MAY-11 503716959 30-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
671337 5.13M DISK 00:00:02 30-MAY-11
BP Key: 671340 Status: AVAILABLE Compressed: YES Tag: TAG20110530T020121
Piece Name: F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110530_G7MDJCVI_S25095_P1
List of Archived Logs in backup set 671337
Thrd Seq Low SCN Low Time Next SCN Next Time
1 44840 503716961 30-MAY-11 503729544 30-MAY-11
2 22521 503716959 30-MAY-11 503729542 30-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
671372 5.25M DISK 00:00:03 30-MAY-11
BP Key: 671375 Status: AVAILABLE Compressed: YES Tag: TAG20110530T040055
Piece Name: F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110530_G9MDJJVN_S25097_P1
the archives are in the location of
F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110529_G1MDINRJ_S25089_P1
when it is not specified in catalog how can i delete archives from f location i.e
F:\OSSTDBY_BACKUP\ARCH\OSONDEMA_ARC_20110529_G1MDINRJ_S25089_P1
please let me know from rman how can i delete archives from f location...........................
do i need to register with catalog?
i have used Delete archivelog all completed before 'SYSDATE-10';
but no use
out put is
MAN> Delete archivelog all completed before 'SYSDATE-10';
eleased channel: ORA_DISK_1
llocated channel: ORA_DISK_1
hannel ORA_DISK_1: sid=311 devtype=DISK
pecification does not match any archive log in the recovery catalog
MAN> crosscheck backup archivelog all;
please send me the query which i can delete ......................thanks
cheers
maheshEdStevens wrote:
856483 wrote:
<snip>
can i have you mobile contact phone number if possible?
I have seen some pretty astonishing requests on this board, but this one really raises (or lowers) the bar. Just what is it your boss is paying you to do?
Some listserves have lots of people giving their number. I find it odd that people would, but not astonishing for someone to ask. Outside the norm here, but how would someone know ahead of time? It's a bravely connected new world. -
Brrestore RMAN-20242: specification does not match any archived log in the repository
Dear all,
When trying to restore arvhive logs which are taken through netbackup with the following command brrestore -a se1-seqLast=path like in the image attached . It fails with the following image:1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found. -
RMAN - specification does not match any archived log in the repository
Hi All,
Oracle 11G R2 on WIndows woo8 R2 Std Edition
I am running RMAN (almost for the first time), and i am using a script previously used. As i am checking through the log, i notice some 'errors' though the backup finishes successfully.
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any archived log in the repository
RMAN> crosscheck backupset;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134331_8QFL24F7_.BKP RECID=16 STAMP=813505412
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134334_8QFL26K1_.BKP RECID=17 STAMP=813505414
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134423_8QFL3S48_.BKP RECID=18 STAMP=813505465
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134427_8QFL3V9J_.BKP RECID=19 STAMP=813505467
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NNNDF_TAG20130423T134428_8QFL3XDT_.BKP RECID=20 STAMP=813505469
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCSNF_TAG20130423T134428_8QFM4C5S_.BKP RECID=21 STAMP=813506507
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T140148_8QFM4DOT_.BKP RECID=22 STAMP=813506508
Crosschecked 7 objects
RMAN> crosscheck copy;
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any datafile copy in the repository
specification does not match any control file copy in the repository
specification does not match any archived log in the repositorySo there are 2 instances of the errors:
1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
Thx in advance!1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found. -
Specification does not match any archive log in the recovery catalog
Hi
My rman backups sometimes fails with below error, any idea the reason ?
run {
allocate channel t1 type 'SBT_TAPE';
backup
incremental level 0
format '/%d_%p_%t.%s/'
maxsetsize = 8G
(database);
backup
format '/%d_%p_%t_al.%s/'
(archivelog from time 'SYSDATE-2');
backup
format '/%d_%p_%t_al.%s/'
(archivelog until time 'SYSDATE-2' delete input);
release channel t1;
Starting backup at 2011-01-18 22:41:59
current log archived
channel t1: starting archive log backupset
channel t1: specifying archive log(s) in backup set
input archive log thread=1 sequence=7348 recid=6260 stamp=740682001
input archive log thread=1 sequence=7349 recid=6261 stamp=740702540
input archive log thread=1 sequence=7350 recid=6262 stamp=740739604
input archive log thread=1 sequence=7351 recid=6263 stamp=740746801
input archive log thread=1 sequence=7352 recid=6264 stamp=740757602
input archive log thread=1 sequence=7353 recid=6265 stamp=740768401
input archive log thread=1 sequence=7354 recid=6266 stamp=740788921
channel t1: starting piece 1 at 2011-01-18 22:42:04
channel t1: finished piece 1 at 2011-01-18 22:42:29
channel t1: backup set complete, elapsed time: 00:00:26
Finished backup at 2011-01-18 22:42:29
Starting backup at 2011-01-18 22:42:31
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 01/18/2011 22:42:31
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20242: specification does not match any archive log in the recovery catalog
Recovery Manager complete.Hi Ora 83,
What is the reason of this error ? The reason for the RMAN-20242 is there are no archivelogs which comply to the filter "until time 'SYSDATE-2'" at 18 Jan 22:42.
Probably you run a purge command more frequent because the oldest logsequence available for backup was created at:
2011 JAN 17 17 00 01 (=sequence=7348)
and the latest at:
2011 JAN 18 22 42 01 (=sequence=7354)
according to your output.
So for some reason the archivelogs created before 16th Jan 22:42 are not on the system as well as the archivelogs created between 16th Jan 22:42 and 17 Jan 17:00.
Maybe there are none (you can check in the alertlog and let us know)?
Regards,
Tycho -
Procedure to delete archive log from standby server
Hi
We are using oracle10g(10.2.0.3) and we configured dataguard .
I want to know procedure to delete applied archive log from standby server?
Thanks
With Regards
umair[Delete Applied Archivelogs on Standby Database |http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html]
http://tinyurl.com/p2krga
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Specification does not match any archived log in the repository
Hi,
in 11G R2 on Win 2008, I backup via RMAN nocatalog , the whole database and archived logs.
backup as compressed backupset format 's:\rman\incr/al_%d_%T_%s_%p' archivelog all delete input;
But :
RMAN> LIST ARCHIVELOG all;
specification does not match any archived log in the repositoryWhat does it mean ? No archived log is backed up ?
Thank you.Hello;
The archive logs deleted as and when they're backed up ( archivelog all delete input )
So if you then try to list them they are gone. Nothing to list, at least until the next log switch.
Maybe keep a few days around
BACKUP ARCHIVELOG ALL DELETE INPUT UNTIL TIME 'SYSDATE - 2
Best Regards
mseberg -
hello I am trying to find my ipod touch I have lost it or it has been stolen I am unable to find the serial number so what should I do?
Go to iTunes>Preferences>Devices and hover the mouse pointer over the iPod backup and the SN will appear. Alsosee:
iPod: How to find the serial number -
Archive logs to standby showing odd behavior.
10.2.0.2
HP 11.23
I'm monitoring the archive log transfer of files, and it appeared a little odd...as if the the files are not being applied.
So log into the system manually, and ran:
recover managed standby database cancel;
returned with recovery complete.
THen I issued:
recover managed standby database until cancel;
It asked for the files. I ran AUTO....it did it's thing, each one individually responding that
ORA-00279: change 7313758876671 generated at 04/24/2009 18:54:51 needed for
thread 1
ORA-00289: suggestion : /oraarch/swesc/peregrine_1_21380_640853326.arc
ORA-00280: change 7313758876671 for thread 1 is in sequence #21380
ORA-00278: log file '/oraarch/swesc/peregrine_1_21379_640853326.arc' no longer
needed for this recovery
Showing that it was successfully going through each archive file, applying it.
It did this until it looked for the next file that didn't exist.
This leaving the final log as 21393.
Then I issue an archive log list...
it shows 21357!
What is going ON?!I ran archive log list on both systems to get that information.
after applying all the archive logs from the primary, the standby still showed the same sequence as it did to prior to recovery.
The recovery completed successfully, but archive log list doesn't show any change.
Meaning that before the recovery was run, it was 21357, after recovery was finished, it SHOULD have ready 23193, but it still read 21357.
Edited by: WillyB on May 6, 2009 11:07 AM -
Best way of deleting archive logs on standby when backup taken on primary
Hello,
I have a 11gr2 dataguard configuration without the broker.
main problem in my particular situation arises from my FRA size on primary much more than on standby (90Gb vs 30Gb) and in some situations I'm constrained with FRA space on standby.... I'm going to align the FRAs but in the mean time....
can anyone confirm that if I have configuration as in subject with maximum performance mode and I'm not using the broker I should consider a sort of "external" way for archive log deletion on the physical standby?
In fact I'm setting on primary
- retention policy = redundancy 1
- archivelog deletion = applied on standby (without using any "backed up...." option)
Considering the standby it seems from docs that:
- retention policy always wins over deletion policy (so no archive eligible for deletion is deleted if retention is not satisfied)
- I can set on standby archivelog deletion = applied on standby (without using any "backed up...." option)
But it is not clear to me the effect of this config in case this is a standby itself and without any other cascade standby databases
The manual says this has to be met:
1) The archived redo log files have been applied to the required standby databases.
---> what does this mean in case the db is a standby.. met or not met as I have no other cascade standby dependant on this one?
2) The logs are not needed by the BACKED UP ... TIMES TO DEVICE TYPE deletion policy. If the BACKED UP policy is not set, then this condition is always met.
---> I should be ok
So the last question for standby is
- what to set retention policy to?
I have not understood if I set it to "NONE", this means no retention at all or retention for ever....
sometimes I read that there is no policy; in other examples that files will be retained forever (because no file considered as obsolete).... or at least so I understood...
I would like to have a sort of policy on standby where the archive logs can be deleted as soon as they are applied during the continuous media recovery phase...
It seems I can't find a self contained set of configurations across the dataguard....
Thanks in advance.
GianlucaI agree with you.... It is a temporary contingency....
I already stressed the fact that sizes between sites must be quite identical...
we are going towards a production dataguard, migrating from a windows config (without it) to a Linux based config....
but this contingency made me think about these considerations regarding policies and automatic dataguard operations
I also stressed on equal size grow capability for both sites file systems, also for data tablespaces, so that for example in case of high fragmentation we have to avoid a limit situation where
1) a file system full for DR datafiles causes abend of automatic media recovery
2) this generates FRA growth in DR because archive logs are shipped but not applied any more
3) FRA goes 100% in DR and primary cannot ship any more
4) archive logs cannot be automatically deleted on primary because not already shipped
5) FRA full on primary and DB hangs....
Thanks anyway for input -
Data Guard Missing Redo Archive Logs
Hi All Gurus
I have setup data guard on windows 2008 server sp2 with oracle 10.2.0.4.0 (Both OS & Oracle DB are 64 bits).
The Network Admin have shutdown Backup server. Now when I checked the Archive status as follows
1. select * from v$archive_gap; It shows a gap in archives e.g. 891 - 920.
2. SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG; e.g. 891-920 Not Applied.
Now I issue following command
1. SELECT RECOVERY_MODE FROM V$ARCHIVE_DEST_STATUS; e.g. MANAGED REAL TIME APPLY
2. DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
or ALTER DATABASE RECOVER managed standby database disconnect from session ;
e.g. incompatible Media Recovery in Progress
3. Alert Log says Adjust CONTROL_FILE_RECORD_KEEP_TIME to sufficient limits.
I have also adjusted CONTROL_FILE_RECORD_KEEP_TIME to 90 days as follows
4. show parameter control_file e.g. CONTROL_FILE_RECORD_KEEP_TIME=90
5. I have checked firewall and tnsping for both Primary and Standby Server e.g. tnsping CVMIS (Primary), CVMISBK (Standby)
Both are OK. TNSPING is showing 10-30msec delay.
6. I have checked the web for gap Removal, Mostly are using RMAN method to Backup and then Restore to Standby DB.
Is there any other way to fill this gap without using RMAN? I mean DG automatically fill it by using some commands
are settings?
Kind Regards
Thunder2777Hi CKPT
Thanks for the scripts which I executed today on 24 Mon 2013. Here are the Results.
Standby Database Script Output:
NAME DISPLAY_VALUE
db_file_name_convert
db_name UMIS
db_unique_name UMISBK
dg_broker_config_file1 C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\DR1UMISBK.DAT
dg_broker_config_file2 C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\DR2UMISBK.DAT
dg_broker_start TRUE
fal_client (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=tcp)(HOST=WIN-
7VSLKL4CGU2)(PORT=1521)))(CONN
ECT_DATA=(SERVICE_NAME=umisbk_
XPT)(INSTANCE_NAME=umisbk)(SER
VER=dedicated)))
fal_server (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=tcp)(HOST=CV-A
JKDB)(PORT=1521)))(CONNECT_DAT
A=(SERVICE_NAME=umis_XPT)(SERV
ER=dedicated)))
local_listener
log_archive_config DG_CONFIG=(UMIS,UMISBK)
log_archive_dest_2 SERVICE=UMIS LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=UMIS
log_archive_dest_state_2 ENABLE
log_archive_max_processes 10
log_file_name_convert E:\oracle\product\10.2.0\flash_recovery_area\UMIS\, D:\ORACLE\FRA\UMISBK
remote_login_passwordfile EXCLUSIVE
standby_archive_dest D:\ORACLE\FRA\UMISBK\ARCHIVELOG\
standby_file_management AUTO
NAME DB_UNIQUE_NAME PROTECTION_MODE DATABASE_R OPEN_MODE
UMIS UMISBK MAXIMUM PERFORMANCE PHYSICAL STANDBY MOUNTED
THREAD# MAX(SEQUENCE#)
1 890
PROCESS STATUS THREAD# SEQUENCE#
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
ARCH CLOSING 1 1062
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
MRP0 WAIT_FOR_GAP 1 891
RFS IDLE 1 1063
RFS IDLE 0 0
NAME VALUE UNIT TIME_COMPUTED
apply finish time day(2) to second(1) interval
apply lag day(2) to second(0) interval
estimated startup time 22 second
standby has been open N
transport lag day(2) to second(0) interval
THREAD# LOW_SEQUENCE# HIGH_SEQUENCE#
1 891 948
NAME Size MB Used MB
D:\ORACLE\FRA 2048 0
STANDBY Alert Log:
Mon Jun 24 10:19:55 2013
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 1868
RFS[2]: Identified database type as 'physical standby'
RFS[2]: Successfully opened standby log 5: 'D:\ORACLE\ORADATA\UMISBK\SLOG02.LOG'
Mon Jun 24 10:22:09 2013
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Mon Jun 24 10:22:09 2013
Starting ORACLE instance (normal)
Mon Jun 24 10:22:09 2013
alter database mount standby database
ORA-1154 signalled during: alter database mount standby database...
Mon Jun 24 10:22:09 2013
alter database recover managed standby database using current logfile disconnect from session
Mon Jun 24 10:22:40 2013
ORA-1153 signalled during: alter database recover managed standby database using current logfile disconnect from session...
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Mon Jun 24 10:24:40 2013
Starting ORACLE instance (normal)
Mon Jun 24 10:24:40 2013
alter database mount standby database
ORA-1154 signalled during: alter database mount standby database...
Mon Jun 24 10:24:40 2013
alter database recover managed standby database using current logfile disconnect from session
Mon Jun 24 10:25:11 2013
ORA-1153 signalled during: alter database recover managed standby database using current logfile disconnect from session...
Mon Jun 24 10:26:46 2013
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Mon Jun 24 10:26:46 2013
Starting ORACLE instance (normal)
Mon Jun 24 10:28:04 2013
alter database mount standby database
Mon Jun 24 10:28:04 2013
ORA-1154 signalled during: alter database mount standby database...
PRIMARY Database Script Output:
NAME DISPLAY_VALUE
db_file_name_convert UMIS, UMISBK
db_name UMIS
db_unique_name UMIS
dg_broker_config_file1 E:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\DR1UMIS.DAT
dg_broker_config_file2 E:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\DR2UMIS.DAT
dg_broker_start TRUE
fal_client UMIS
fal_server UMISBK
local_listener
log_archive_config DG_CONFIG=(UMIS,UMISBK)
log_archive_dest_2 service="(DESCRIPTION=(ADDRESS
_LIST=(ADDRESS=(PROTOCOL=tcp)(
HOST=WIN-7VSLKL4CGU2)(PORT=152
1)))(CONNECT_DATA=(SERVICE_NAM
E=umisbk_XPT)(INSTANCE_NAME=um
isbk)(SERVER=dedicated)))",
LGWR ASYNC NOAFFIRM delay=0 O
PTIONAL max_failure=0 max_conn
ections=1 reopen=300 db_uniq
ue_name="umisbk" register net_
timeout=180 valid_for=(online
_logfile,primary_role)
log_archive_dest_state_2 ENABLE
log_archive_max_processes 2
log_file_name_convert E:\oracle\product\10.2.0\flash_recOvery_area\UMIS ARCHIVELOG\, D:\ORACLE\FRA\UMISBK\ARCHIVELOG\
remote_login_passwordfile EXCLUSIVE
standby_archive_dest
standby_file_management AUTO
NAME DB_UNIQUE_NAME PROTECTION_MODE DATABASE_R OPEN_MODE SWITCHOVER_STATUS
UMIS UMIS MAXIMUM PERFORMANCE PRIMARY READ WRITE SESSIONS ACTIVE
THREAD# MAX(SEQUENCE#)
1 1062
Thread Last Sequence Received Last Sequence Applied Difference
1 1062 1062 0
1 1062 1062 0
SEVERITY ERROR_CODE timestamp MESSAGE
Error 12514 24-JUN-2013 10:08:02 LGWR: Error 12514 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))
Error 12514 24-JUN-2013 10:08:04 LGWR: Error 12514 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))
Error 12514 24-JUN-2013 10:08:07 FAL[server, ARC1]: Error 12514 creating remote archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
Error 12514 24-JUN-2013 10:08:31 LGWR: Error 12514 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))
Error 12514 24-JUN-2013 10:08:59 FAL[server, ARC1]: Error 12514 creating remote archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
Error 12514 24-JUN-2013 10:14:57 PING[ARC1]: Heartbeat failed to connect to standby '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'. Error is 12514.
ID STATUS DB_MODE TYPE RECOVERY_MODE PROTECTION_MODE SRLs ACTIVE ARCHIVED_SEQ#
1 VALID OPEN ARCH IDLE MAXIMUM PERFORMANCE 0 0 1062
2 VALID UNKNOWN LGWR UNKNOWN MAXIMUM PERFORMANCE 4 3 1054
NAME Size MB Used MB
E:\oracle\product\10.2.0\flash_recovery_area 2048 0
Primary Alert Log:
System parameters with non-default values:
processes = 150
__shared_pool_size = 335544320
__large_pool_size = 16777216
__java_pool_size = 33554432
__streams_pool_size = 0
sga_target = 1258291200
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\CONTROL02.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\CONTROL03.CTL
db_file_name_convert = UMIS, UMISBK
log_file_name_convert = E:\oracle\product\10.2.0\flash_recOvery_area\UMIS ARCHIVELOG\, D:\ORACLE\FRA\UMISBK\ARCHIVELOG\
control_file_record_keep_time= 90
db_block_size = 8192
__db_cache_size = 855638016
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(UMIS,UMISBK)
log_archive_dest_1 = location="E:\oracle\product\10.2.0\flash_recovery_area\UMIS\ARCHIVELOG", valid_for=(ONLINE_LOGFILE,ALL_ROLES)
log_archive_dest_2 = service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))", LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="umisbk" register net_timeout=180 valid_for=(online_logfile,primary_role)
log_archive_dest_state_1 = ENABLE
log_archive_dest_state_2 = ENABLE
log_archive_max_processes= 2
log_archive_min_succeed_dest= 1
standby_archive_dest =
log_archive_trace = 0
log_archive_format = ARC_s%S_r%R_t%T.arc
fal_client = UMIS
fal_server = UMISBK
archive_lag_target = 0
db_file_multiblock_read_count= 16
db_recovery_file_dest = E:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=UMISXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\ADMIN\UMIS\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\ADMIN\UMIS\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\ADMIN\UMIS\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\ADMIN\UMIS\CDUMP
db_name = UMIS
open_cursors = 300
pga_aggregate_target = 417333248
dg_broker_start = TRUE
PSP0 started with pid=3, OS id=2824
MMAN started with pid=4, OS id=2820
DBW0 started with pid=5, OS id=2396
LGWR started with pid=6, OS id=2676
CKPT started with pid=7, OS id=2692
SMON started with pid=8, OS id=2096
RECO started with pid=9, OS id=2924
CJQ0 started with pid=10, OS id=2832
MMON started with pid=11, OS id=3052
Mon Jun 24 10:07:34 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jun 24 10:07:34 2013
starting up 1 shared server(s) ...
MMNL started with pid=12, OS id=2700
DMON started with pid=15, OS id=2908
PMON started with pid=2, OS id=2812
Mon Jun 24 10:07:35 2013
alter database mount exclusive
Mon Jun 24 10:07:40 2013
Setting recovery target incarnation to 2
Mon Jun 24 10:07:42 2013
Successful mount of redo thread 1, with mount id 316954407
Mon Jun 24 10:07:42 2013
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Mon Jun 24 10:07:42 2013
alter database open
Mon Jun 24 10:07:47 2013
Starting Data Guard Broker (DMON)
NSV1 started with pid=16, OS id=3552
Mon Jun 24 10:07:50 2013
Beginning crash recovery of 1 threads
parallel recovery started with 7 processes
INSV started with pid=24, OS id=3628
Mon Jun 24 10:07:52 2013
Started redo scan
Mon Jun 24 10:07:53 2013
Completed redo scan
144 redo blocks read, 60 data blocks need recovery
Mon Jun 24 10:07:53 2013
Started redo application at
Thread 1: logseq 1059, block 8380
Mon Jun 24 10:07:53 2013
Recovery of Online Redo Log: Thread 1 Group 3 Seq 1059 Reading mem 0
Mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO03.LOG
Mon Jun 24 10:07:53 2013
Completed redo application
Mon Jun 24 10:07:53 2013
Completed crash recovery at
Thread 1: logseq 1059, block 8524, scn 26461769
60 data blocks read, 60 data blocks written, 144 redo blocks read
Mon Jun 24 10:07:57 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=3804
ARC1 started with pid=26, OS id=3808
Mon Jun 24 10:07:57 2013
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
RSM0 started with pid=27, OS id=3812
LNS1 started with pid=28, OS id=3824
Mon Jun 24 10:08:01 2013
Thread 1 advanced to log sequence 1060 (thread open)
Thread 1 opened at log sequence 1060
Current log# 1 seq# 1060 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO01.LOG
Successful open of redo thread 1
Mon Jun 24 10:08:02 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Jun 24 10:08:02 2013
ARC1: STARTING ARCH PROCESSES
Mon Jun 24 10:08:02 2013
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Mon Jun 24 10:08:02 2013
ARC2: Archival started
Mon Jun 24 10:08:02 2013
ARC1: STARTING ARCH PROCESSES COMPLETE
ARC2 started with pid=29, OS id=3544
ARC1: Becoming the heartbeat ARCH
Mon Jun 24 10:08:02 2013
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
Error 12514 received logging on to the standby
LGWR: Error 12514 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
Mon Jun 24 10:08:02 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_lns1_3824.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Mon Jun 24 10:08:02 2013
SMON: enabling cache recovery
Mon Jun 24 10:08:03 2013
ALTER SYSTEM SET log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="umisbk" register net_timeout=180 valid_for=(online_logfile,primary_role)' SCOPE=BOTH;
Mon Jun 24 10:08:03 2013
LNS: Failed to archive log 1 thread 1 sequence 1060 (12514)
Mon Jun 24 10:08:03 2013
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
Mon Jun 24 10:08:03 2013
ALTER DATABASE OPEN
Mon Jun 24 10:08:03 2013
ORA-1531 signalled during: ALTER DATABASE OPEN...
Mon Jun 24 10:08:04 2013
Error 12514 received logging on to the standby
LGWR: Error 12514 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
Mon Jun 24 10:08:04 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_lns1_3824.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
LNS: Failed to archive log 1 thread 1 sequence 1060 (12514)
Mon Jun 24 10:08:04 2013
Successfully onlined Undo Tablespace 1.
Mon Jun 24 10:08:04 2013
SMON: enabling tx recovery
Mon Jun 24 10:08:05 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 8
Mon Jun 24 10:08:06 2013
Error 12514 received logging on to the standby
Mon Jun 24 10:08:06 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_arc1_3808.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
FAL[server, ARC1]: Error 12514 creating remote archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
FAL[server, ARC1]: FAL archive failed, see trace file.
Mon Jun 24 10:08:07 2013
replication_dependency_tracking turned off (no async multimaster replication found)
Mon Jun 24 10:08:07 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_arc1_3808.trc:
ORA-16055: FAL request rejected
Mon Jun 24 10:08:07 2013
ARCH: FAL archive failed. Archiver continuing
Mon Jun 24 10:08:08 2013
Starting background process QMNC
QMNC started with pid=28, OS id=3984
Mon Jun 24 10:08:15 2013
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Jun 24 10:08:15 2013
Completed: alter database open
Mon Jun 24 10:08:19 2013
ALTER SYSTEM SET standby_archive_dest='' SCOPE=BOTH SID='umis';
Mon Jun 24 10:08:19 2013
ALTER SYSTEM SET log_archive_trace=0 SCOPE=BOTH SID='umis';
Mon Jun 24 10:08:19 2013
ALTER SYSTEM SET log_archive_format='ARC_s%S_r%R_t%T.arc' SCOPE=SPFILE SID='umis';
Mon Jun 24 10:08:20 2013
ALTER SYSTEM SET standby_file_management='AUTO' SCOPE=BOTH SID='*';
Mon Jun 24 10:08:20 2013
ALTER SYSTEM SET archive_lag_target=0 SCOPE=BOTH SID='*';
Mon Jun 24 10:08:20 2013
ALTER SYSTEM SET log_archive_max_processes=2 SCOPE=BOTH SID='*';
Mon Jun 24 10:08:21 2013
ALTER SYSTEM SET log_archive_min_succeed_dest=1 SCOPE=BOTH SID='*';
Mon Jun 24 10:08:21 2013
ALTER SYSTEM SET db_file_name_convert='UMIS','UMISBK' SCOPE=SPFILE;
Mon Jun 24 10:08:21 2013
ALTER SYSTEM SET log_file_name_convert='E:\oracle\product\10.2.0\flash_recOvery_area\UMIS ARCHIVELOG\','D:\ORACLE\FRA\UMISBK\ARCHIVELOG\' SCOPE=SPFILE;
Mon Jun 24 10:08:21 2013
ALTER SYSTEM ARCHIVE LOG
Mon Jun 24 10:08:21 2013
Thread 1 cannot allocate new log, sequence 1061
Private strand flush not complete
Current log# 1 seq# 1060 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO01.LOG
Mon Jun 24 10:08:22 2013
Shutting down archive processes
Mon Jun 24 10:08:22 2013
Thread 1 advanced to log sequence 1061 (LGWR switch)
Mon Jun 24 10:08:22 2013
Current log# 2 seq# 1061 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO02.LOG
Mon Jun 24 10:08:27 2013
ARCH shutting down
ARC2: Archival stopped
Mon Jun 24 10:08:27 2013
ALTER SYSTEM SET log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="umisbk" register net_timeout=180 valid_for=(online_logfile,primary_role)' SCOPE=BOTH;
Mon Jun 24 10:08:27 2013
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
Mon Jun 24 10:08:27 2013
ALTER SYSTEM ARCHIVE LOG
Mon Jun 24 10:08:27 2013
Thread 1 cannot allocate new log, sequence 1062
Private strand flush not complete
Current log# 2 seq# 1061 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO02.LOG
LNS1 started with pid=29, OS id=4204
Mon Jun 24 10:08:31 2013
Thread 1 advanced to log sequence 1062 (LGWR switch)
Current log# 3 seq# 1062 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO03.LOG
Mon Jun 24 10:08:31 2013
Error 12514 received logging on to the standby
LGWR: Error 12514 creating archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
Mon Jun 24 10:08:31 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_lns1_4204.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
LNS: Failed to archive log 3 thread 1 sequence 1062 (12514)
Mon Jun 24 10:08:59 2013
Error 12514 received logging on to the standby
Mon Jun 24 10:08:59 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_arc1_3808.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
FAL[server, ARC1]: Error 12514 creating remote archivelog file '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'
FAL[server, ARC1]: FAL archive failed, see trace file.
Mon Jun 24 10:08:59 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_arc1_3808.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Mon Jun 24 10:14:57 2013
Error 12514 received logging on to the standby
Mon Jun 24 10:14:57 2013
Errors in file e:\oracle\product\10.2.0\admin\umis\bdump\umis_arc1_3808.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARC1]: Heartbeat failed to connect to standby '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))'. Error is 12514.
Mon Jun 24 10:18:46 2013
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
Mon Jun 24 10:19:23 2013
ALTER SYSTEM SET log_archive_dest_2='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-7VSLKL4CGU2)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=umisbk_XPT)(INSTANCE_NAME=umisbk)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="umisbk" register net_timeout=180 valid_for=(online_logfile,primary_role)' SCOPE=BOTH;
Mon Jun 24 10:19:23 2013
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
Mon Jun 24 10:19:23 2013
ALTER SYSTEM ARCHIVE LOG
Mon Jun 24 10:19:24 2013
Thread 1 cannot allocate new log, sequence 1063
Private strand flush not complete
Current log# 3 seq# 1062 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO03.LOG
LNS1 started with pid=18, OS id=4300
Mon Jun 24 10:19:28 2013
Thread 1 advanced to log sequence 1063 (LGWR switch)
Current log# 1 seq# 1063 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\UMIS\REDO01.LOG
Mon Jun 24 10:19:28 2013
LNS: Standby redo logfile selected for thread 1 sequence 1063 for destination LOG_ARCHIVE_DEST_2
Mon Jun 24 10:19:58 2013
ARC1: Standby redo logfile selected for thread 1 sequence 1062 for destination LOG_ARCHIVE_DEST_2
Well there seems to be some connectivity issue on Primary DB (I Guess!!!).
But when I issue tnsping from Primary Database, the result is
SQL> host tnsping umisbk (Standy DB Name) ---> Status: OK [10-30msec]
And when I issue tnsping from Standby Database, the result is
SQL> host tnsping umis (Primary DB Name) ---> Status: OK [10-30msec]
So what your Recommendation.
Kind Regards
Thuhnder2777
Maybe you are looking for
-
Org.eclipse.swt.SWTException: Invalid thread access - Action struts
Hi I�m runing this WordSearchReplace java class that I got here in this forum, and I�m runing it doing search and replace in Ms word document if I run just one time it works ok, but if I run twice i got that erro, I�m runing that java class in my Act
-
What's a easy way to rename my network.
I am using Airport Express and its great but i don't like my network name, others around can see my name i didn't think of that since i just got it today. Anyone know of a easy way to rename my network or wifi. Thanks for any help in advance.
-
Avoid EBS Vision Database data on Full Load in OBIEE
I've run Full Load after stressful installation and integration OBIEE 11g v.11.1.1.5 and OBI Applications. The data loaded more or less OK, some parameters settings and application tuning need to be completed and it is not the issue. The problem is t
-
Consumption data material master
hi can any one tell how to upload consumption data in material master using BAPI or any other method.. regards, deepthi
-
Display format for Exif Tag: ExposureTime
Hello, I'm a user of Adobe Photoshop Elements 3.0, in which the image editor component displays "File Info" (Exif and XMP information) embedded in the image file using the Adobe Photoshop Information Panels, which are XMP files ( DOCTYPE panel SYSTEM