Having transition sequences persist between mutiple states

Hi Guys,
ive just been animating some crazy transitions between states,
however i've come to realise that i need to do them same transition sequences in all the other states.
for instance, in my Art to Photo states i have the hectic transitions occuring, (selecting the art button, objects rotate and things fly into screen and fade in and out)
but then,
i need to do the same hectic transition fom Photo to Art, (only the transition will be in reverse)
any ideas how this can be done, as a batch maybe, without having to go into each state and create the transitions manually from scratch?
i know that we can have objects persist over multiple states, but transitions in the timeline would be great to persist over multiple states too.
cheers
Mudd

Hi adam,
basically i would like a transition that occures in one of the states (i.e: fading the previous state out and fading in the selected state whilst the new states sub category buttons fly onto the screen, etc) to presist over other states that have buttons with sub category buttons.
i was hoping for a simple select all transitions in the one states timeline and copy that same arrangement of transitions into another states timeline; so to act as a time saving devise, instead of manually doing all those transitions again.
does this make sense? it sounds fine to me. hope you get the picture.
cheers
Mudd

Similar Messages

Transition between 2 states

Hello!
I am using a simple Fade+Blur transition to move from one state to the other.
The problem is the switch is done instantly and both effects are played on the already changed state.
<s:Transition fromState="*" toState="*" autoReverse="true">
<s:Sequence>
<s:Parallel duration="500" target="{this}">
<mx:Fade alphaFrom="1" alphaTo="0"/>
<mx:Blur blurXFrom="0" blurXTo="20" blurYFrom="0" blurYTo="20"/>
</s:Parallel>
<s:Parallel duration="500" target="{this}">
<mx:Fade alphaFrom="0" alphaTo="1"/>
<mx:Blur blurXFrom="20" blurXTo="0" blurYFrom="20" blurYTo="0"/>
</s:Parallel>
</s:Sequence>
</s:Transition>
How can I tell it to switch states after the initial fade without having to code that with listeners etc.

This was just me being a numpty
I didn't realise that I had to enclose an
<mx:Transition> declaration inside an <mx:transactions>
declaration.
I must read the examples more closely!
However I would have thought that the compiler would have
told me something - or produced an error when I tried to execute
it....

Transition effects between the states..?

Hi, There.
How I can set the "Transition effects" between the states please?. When I add the different photos to the several states, I want to set the transition effects like "Fade". Help me anyone please.
Thanks

Try to make a few more transitional states in between with varying levels of opacity for each picture (and play with the State Delay time). Other than that, i don't think Fireworks has transitional effects for slideshows (i may be wrong).

Transition creates gap between clips

I place a transition between the two clips and it seems to create a large gap when the transition is in between the clips. Is this the way it is supposed to be? Just curious. Thanks.

Thanks Joe Blow.
That link describes changing the in/out points when dealing I think with the middle clip of three clips. I tried the technique but when I put the mouse (with that tool selected) over my clip in the timeline and dragged eithe rway, it only allowed me to start the clip earlier and with that only for a second or two. (It's possible my clip starts only 1 or 2 seconds earlier so I can understand that) but it won't allow me to start the clip later. I want to start it about 15 seconds later. Right now I'm only dealing with two clips with a dissolve transition between them until I figure this out. Also, if I change the in point of the clip I don't want the out to change. I realize that if I start in the inpoint later in the clip and the out point of the clip doesn't change then the over lenghth of the clip will be shorter and that theoretically everything to the right of the in point I'm adjusting should adjust left in the timeline. Is there a way to do this?
If I was clear, ignore this but as an example, I have a 10 second clip to start my timeline, then a dissolve transition into a 20 second clip. Now the timeline has a total of 30 seconds of video. I'd like to start the second clip 5 seconds later without affecting the out point. So if I do this the first clip will still be 10 seconds but the second clip will now be 15 seconds and the timeline will go from 30 to 25. (rather than staying at 30 and having the out point of the second clip adjust by 5 seconds)

Issues with interactivity between component states and page states

Hi there, I recently downloaded the trial of Catalyst 5.5 and am encountering the following problem:-
I have many screens in my application and am attempting to get around the 20 state limit by creating custom components that contain multiple states that can be used as screens. So, I have created button links between the component states which work fine but have also created button links to and from the standard states of the application, which dont work upon running/publishing. I'm not quite sure whats wrong here as the button commands are pointing to the right place, i.e. they are pointing firstly to the specific custom component and then the state within the component, but its just not working.
Is this a trial issue or something deeper?
I really hope someone can help as apart from this issue I have been very happy with the application but if I can not find a solution theres no point in purchasing it.
Cheers.

Ive had the same problem. Im trying to create an interactive e-book but im having problmes with the limit of states. I have now worked out that i have to create custom components to create a sub-state but im finding it difficult to go between sub states. Help anyone?

Relationship between FINANCIAL STATEMENT ITEM and GL ACCOUNT NUMBER

hii experts...
can anyone tell me the relationship between FINANCIAL STATEMENT ITEM (FIELD NAME: ERGSL) and GL ACCOUNT number corresponding to that FSV..
and if these fields are present in any table... den please do tell...
thanks in advance.

Thanks Raymond for giving me suggestion...
bt wat actually is my problem na...
i m creating a balance sheet in BAPI and in this I need FSV and GL account number...
i got everyting bt i cant find the realtionship between these two fields...
hope u understand my problem..

Can you share one apple id between mutiple devices ?

can you share one apple id between mutiple devices ?

As far as i know, yes. What devices are you using, and try iCloud depending on your device type.

Difference between emergency state and single user mode ?

Hi,
I want to know the difference between emergency state which we normally use in suspect mode database and single user mode.
Navakanth

Emergency/suspect mode is tells you the state of the database and database is not available for user action but where as single user mode tells the user action preference. Database is active and available for the user action.
You can refer
http://msdn.microsoft.com/en-us/library/bb522682.aspx
EMERGENCY
The database is marked READ_ONLY, logging is disabled, and access is limited to members of the sysadmin fixed server role. EMERGENCY is primarily used for troubleshooting purposes. For example, a database marked as suspect due to a corrupted log file can be
set to the EMERGENCY state. This could enable the system administrator read-only access to the database. Only members of the sysadmin fixed server role can set a database to the EMERGENCY state.
SINGLE_USER
Specifies that only one user at a time can access the database. If SINGLE_USER is specified and there are other users connected to the database the ALTER DATABASE statement will be blocked until all users disconnect from the specified database. To override
this behavior, see the WITH <termination> clause.
The database remains in SINGLE_USER mode even if the user that set the option logs off. At that point, a different user, but only one, can connect to the database.
Before you set the database to SINGLE_USER, verify the AUTO_UPDATE_STATISTICS_ASYNC option is set to OFF. When set to ON, the background thread used to update statistics takes a connection against the database, and you will be unable to access the database
in single-user mode. To view the status of this option, query the is_auto_update_stats_async_on column in the sys.databases catalog view.
If the option is set to ON, perform the following tasks:
Set AUTO_UPDATE_STATISTICS_ASYNC to OFF.
Check for active asynchronous statistics jobs by querying the sys.dm_exec_background_job_queue dynamic management view.
If there are active jobs, either allow the jobs to complete or manually terminate them by using KILL STATS JOB.
--Prashanth

Difference between "print" statements and "select" statements , TSQL

What is the difference between "print" statements and "select" statements when it omces to debugging and watching varibles in the stored procs .....

SELECT statement is part of the ANSI SQL language.
PRINT command is not part of the SQL language, it is used for debugging in T-SQL.
BOL:" Returns a user-defined message to the client.
A message string can be up to 8,000 characters long if it is a non-Unicode string, and 4,000 characters long if it is a Unicode string. Longer strings are truncated. The
varchar(max) and nvarchar(max) data types are truncated to data types that are no larger than
varchar(8000) and nvarchar(4000).
RAISERROR can also be used to return messages. RAISERROR has these advantages over PRINT:
RAISERROR supports substituting arguments into an error message string using a mechanism modeled on the printf function of the C language standard library.
RAISERROR can specify a unique error number, a severity, and a state code in addition to the text message.
RAISERROR can be used to return user-defined messages created using the sp_addmessage system stored procedure."
LINK: http://technet.microsoft.com/en-us/library/ms176047.aspx
The SSMS (client software) returns SELECT output to Results and PRINT output to Messages.
The SQLCMD -o (output file) option captures all outputs into one file mixed.
Kalman Toth Database & OLAP Architect
T-SQL Scripts at sqlusa.com
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Count the number of accounts having purchased a product between 2 dates

Hello,
I want to do a count for the number of accounts having purchased a product between a duration ( 2 dates ).
E.g. Account code 001034 has purchase the same product, one on the 19-Oct-2011 and another time is on the 26-Oct 2011.
The Account total on 19-Oct-2011 is = 183
and Total for 26-Oct-2011 = 86.
Both this total include the count the same account code 001034.
I want to have the following...
19-Oct-2011 -->Total count = 183
26-Oct-2011-->Total Count = 85 ( not 86 ), i.e. remove the extra counting for the 2nd time for the same account.
I want to track this report as to see how many Account has purchase this new Product based on these duration date printed.
Is there a way I can generated or create such a report?
Thank you.

Hi,
Create dashboard and add dashboard prompt : add u r date column and set as in between operator type then make it this columns as is prompted in u r answers report
For the count ;
Use count function in u r account column
Like column
Rcount(sum(account))
Then save it
Thanks
Deva

Difference between tables statement and work area

Hi
i would like know the difference between these statement.
tables: vttk.
data :itab type standard table of vttk,
wa_itab like line of vttk.
what will happen with the table statement keyword ???
whether any difference between the ouput created through tables and wa_itab statement???

Hi
HI,
INTERNAL Table and it's background:
===================================
Internal table acts as a container which is used to store the record sets. That is used to store the data fetched from the database table.
So due to performance reason every time access to database would not be so good and decrease the performance. So you just select the data from the database and store it in the intermediate table. This table is called INTERNAL TABLE. So it's an replica of the database. The design foes like this,
PRESENTATION SERVER <> APPLICATION SERVER <>
DATABASE SERVER.
So everytime gain accessing to database results in high resource usage and bad permformance.
So always play around with internal tables. So obviously the whenever you access the data in the INTERNAL TABLE, the application server will be used.
WORK AREA:
==========
When ever you loop at the internal table, the current record should be stored in a temporary work place. That is called WORK AREA.
LOOP AT ITAB INTO WORKAREA.
ENDLOOP.
ITAB :An internal table
WORKAREA:An instance of internal table
Go thru the link below
Internal tables
appending internal tables.
<b>Reward if usefull</b>

Having trouble with persist

I have created a simple application where a user can order items and then i'm saving the order and all the items (details of order) to the dataBase.
i'm using jdk1.5 with jboss and mySql (also hibernate).
i'm having troubles with saving the details of the order, the relevant code is-
order entity -
@Entity
public class Orders implements Serializable
    @Id @GeneratedValue
    private long orderId;                    //generated in db
    private String name;
   public Orders(String userName)
        this.userName=userName;
    public long getOrderId() { return orderId; }
    //getters and setters...
detailsOfOrder entity -
@Entity
public class DetailsOfOrders implements Serializable
@Id
private long orderId;
@Id
private int productId;
private int quantity;
public DetailsOfOrders(long orderId,int productId)
     this.productId=productId;
     this.orderId=orderId;
public long getOrderId() { return orderId; }
public int getProductId() { return productId; }
//getters and setters...
}session bean (order method) -
        List<SCItem> listOfItems;                         //SCItem is a regular class
        Orders order=new Orders(userName);
        manager.persist(order);
        long orderId=order.getOrderId();   //get order id after persisting
        for(SCItem item : listOfItems)    //save details of order
         DetailsOfOrders detail=new DetailsOfOrders(orderId,"1");
         manager.persist(detail);                                                   //exception occures here
       }when i'm trying to make an order i'm getting the exception-
javax.transaction.RollbackException: [com.arjuna.ats.internal.jta.transaction.arjunacore.commitwhenaborted] [com.arjuna.ats.internal.jta.transaction.arjunacore.commitwhenaborted] Can't commit because the transaction is in aborted state
what is the problem?
thanks in advanced.

yes, the entity classes have no-arg constructors (i just tried to write it shortly here...)
about the other thing , well i'm sorry , the right code is-
session bean (order method) -
   List<SCItem> listOfItems;                         //SCItem is a regular class
   Orders order=new Orders(userName);
   manager.persist(order);
   long orderId=order.getOrderId();   //get order id after persisting
   for(SCItem item : listOfItems)    //save details of order
     DetailsOfOrders detail=new DetailsOfOrders(orderId,item.getProductId());
     manager.persist(detail);                                                   //exception occures here
     }what else could it be?

HT5067 When using a Keynote Widget with iBooks Author, do the transitions and builds between Keynote slides appear in the iPad preview version of the iBook, or only in the finished product?

I'm using the Keynote Widget in iBooks Author, and the Keynote presentation uses the Magic move transition between slides. When I preview the iBook on a new iPad, the Magic move transitions don't show up (i.e. the transition from slide to slide is standard, not Magic move). Any suggestions?

Hyperlinks and magic move should work but don't. However I found the following as a workaround for me. Use three slides instead of two to generate the magic move effect in Keynote presentations on Ibooks using hyperlinks only. As an example
Supose an object on slide 1 was set as a hyperlink to go to a slide which then had a magic move effect to a third slide. For some reason it works on the mac, but not on ibooks. However you can create the magic move transition effect by simply adding a "dummy slide" as follows. Suppose an object on slide 1 had an object which would hyperlink to slide 4. Duplicate Slide 4, and make the duplicate slide 5. Then set Slide 4 to automatically transition (with no effect) to the next slide (i.e. slide 5) after .5 seconds. Have Slide 5 set to transition to Slide 6 using magic move automatically after .5 seconds. By having the hyperlink point to slide 4 the magic move effect from Slide 5 to Slide 6 works fine (with a brief 1 sec delay). IF the hyperlink pointed directly to Slide 5, the magic move transition to slide 6 would not work.
For some reason having an extra slide makes magic move work even though it is not needed on the mac. I hpe this helps.

Differences between these statements

Could you please let me know the exact difference between these two statements?
ALTER SESSION ENABLE PARALLEL QUERY;
ALTER SESSION FORCE PARALLEL QUERY PARALLEL 16;In the second one we can control the number of parallel threads .
Is there any other difference between these two?
Thanks in advance!
Edited by: Pandeesh on Feb 12, 2013 8:26 AM
Edited by: Pandeesh on Feb 12, 2013 8:27 AM

>
Thanks! I checked the documentation just now.
>
I don't understand how you could have checked the documentation if you still don't understand what the word FORCE adds to things.
I just checked the documentation and it seems pretty clear to me.
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_2012.htm
>
ENABLE Clause
Specify ENABLE to execute subsequent statements in the session in parallel. This is the default for DDL and query statements.
•DML: DML statements are executed in parallel mode if a parallel hint or a parallel clause is specified.
•DDL: DDL statements are executed in parallel mode if a parallel clause is specified.
•QUERY: Queries are executed in parallel mode if a parallel hint or a parallel clause is specified.
Restriction on the ENABLE clause You cannot specify the optional PARALLEL integer with ENABLE.
DISABLE Clause
Specify DISABLE to execute subsequent statements in the session serially. This is the default for DML statements.
•DML: DML statements are executed serially.
•DDL: DDL statements are executed serially.
•QUERY: Queries are executed serially.
Restriction on the DISABLE clause You cannot specify the optional PARALLEL integer with DISABLE.
FORCE Clause
FORCE forces parallel execution of subsequent statements in the session. If no parallel clause or hint is specified, then a default degree of parallelism is used. This clause overrides any parallel_clause specified in subsequent statements in the session but is overridden by a parallel hint.
•DML: Provided no parallel DML restrictions are violated, subsequent DML statements in the session are executed with the default degree of parallelism, unless a degree is specified in this clause.
>
This is the DML bullet point for ENABLE
>
•DML: DML statements are executed in parallel mode if a parallel hint or a parallel clause is specified.
>
And this is the one for FORCE
>
FORCE forces parallel execution of subsequent statements in the session. If no parallel clause or hint is specified, then a default degree of parallelism is used.
>
The word ENABLE does just what you would expect it to do: it ENABLEs (allows) parallel to be used. Parallel will be used if, as the doc quote says, 'a parallel hint or a parallel clause is specified'.
The word FORCE does just what you would expect it to do: it FORCEs parallel to be used. As the doc quote says 'FORCE forces parallel execution of subsequent statements in the session. If no parallel clause or hint is specified, then a default degree of parallelism is used.'.
With FORCE parallel WILL be used. With ENABLE parallel MAY be used.
If you still don't understand the difference then please explain what it is you are having trouble with.

How to calculate the % of time difference between different state

Hi there,
The below query returns the follwoign outptut. I need to calculate the % of time period that a specific state ( state ex: open or closed or all report )exists.
I have to find the time difference between the 2 states . How could I do that ?
The first row shows null for the previous state . How could get actual previous state for the first row?
SELECT si.station_name,
                vppstation.avi_control_state_code.STATE_SHORT_NAME,
                ash.state_id ,
                lag(ash.state_id) over (order by ash.STATE_EFF_DATE desc) previous_state,
                TO_NUMBER(TO_CHAR(ash.state_eff_date, 'SSSSS')) "periods in sec",
                TO_CHAR(ash.state_eff_date, 'dd-mon-yyyy hh24:mi:ss am') "Date"
           from vppstation.avi_state_history ash
left outer join vppstation.avi_control_state_code
             on ash.state_id = vppstation.avi_control_state_code.state_id
LEFT OUTER JOIN vpproadside.stations_installed si
             ON ash.station_id = si.station_id
          where ash.state_eff_date >= to_date('28/02/2010', 'dd/mm/yyyy')
            and ash.state_eff_date <= to_date('03/03/2010', 'dd/mm/yyyy') ;
       group by si.station_name
                     ash.state_id
       order by ash.state_eff_date asc ;
STATION_NAME                   STATE_SHORT_NAME STATE_ID               PREVIOUS_STATE         periods in sec         Date
IRDNCST02                      Open             1                    NULL                  85166                  01-mar-2010 23:39:26 pm
IRDNCST02                      All Report       3                      1                      85159                  01-mar-2010 23:39:19 pm
IRDNCMT01                      Closed           2                      3                      81376                  01-mar-2010 22:36:16 pm
IRDNCST02                      Open             1                      2                      78723                  01-mar-2010 21:52:03 pm
IRDNCST02                      All Report       3                      1                      76023                  01-mar-2010 21:07:03 pm
IRDNCMT01                      Open             1                      3                      55922                  01-mar-2010 15:32:02 pm
IRDNCMT01                      Closed           2                      1                      54931                  01-mar-2010 15:15:31 pm
IRDNCHA01                      Closed           2                      2                      41291                  01-mar-2010 11:28:11 am
IRDNCAS01                      Open             1                      2                      38847                  01-mar-2010 10:47:27 am
IRDNCAS01                      All Report       3                      1                      37947                  01-mar-2010 10:32:27 am
IRDNCST02                      Open             1                      3                      35332                  01-mar-2010 09:48:52 am
IRDNCST02                      All Report       3                      1                      32632                  01-mar-2010 09:03:52 am
IRDNCST02                      Open             1                      3                      31502                  01-mar-2010 08:45:02 am
IRDNCST02                      All Report       3                      1                      28802                  01-mar-2010 08:00:02 am
IRDNCHI01                      Open             1                      3                      25368                  01-mar-2010 07:02:48 am
IRDNCHI02                      Open             1                      1                      23939                  01-mar-2010 06:38:59 am
IRDNCMT01                      Open             1                      1                      20696                  01-mar-2010 05:44:56 am
IRDNCCH02                      Open             1                      1                      13452                  01-mar-2010 03:44:12 am
Edited by: Indhu Ram on Mar 11, 2010 1:34 PM
Edited by: Indhu Ram on Mar 11, 2010 2:20 PM

If you look at the table which is output of the given query , there is column called "STATE_ID" It shows the current state ie open or closed or all report.
The column 'PREVIOUS_STATE' shows the state before the current state. .In the table in 2nd row in previous_state column there is state_id = 1 (open)which is the state before 'all report state'

Having transition sequences persist between mutiple states

Similar Messages

Maybe you are looking for