Having trouble w/ highlighting text (last character never shows it's highlighted), using drop down boxes, and my browser keeps crashing past few days.
I clear my cache and cookies regularly (1-3 times per day), I have reset firefox, and I have uninstalled and re-installed.
This is the only browser on my computer I am having an issue with.
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox including hardware acceleration of graphics. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?
Similar Messages
-
How to create a drop down box and text box in screen painter?
Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
mark type c , "This is to select the record.
matnr like mara-matnr ,
matkl like mara-matkl,
maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O -
''''''Solved the Problem by un-checking “Enable Hardware Acceleration" after right-clicking a Flash Video and clicking Settings !! ''''''
Solved the Problem by un-checking “Enable Hardware Acceleration" after right-clicking a Flash Video and clicking Settings !!
-
Having trouble rotating my text box.
I'm creating a writeable PDF and want to add some text boxes. I'm having trouble rotating my text boxes to align with my design and the rotating icon isn't popping up. Is it even possible to do this?
In form fields you can only rotate the text orientation, and only in 90
degree intervals.
On Wed, Aug 13, 2014 at 6:02 PM, Test Screen Name <[email protected]> -
Why am I having trouble running Adobe Flash Player 11 on my 2011 Macbook Air? I've downloaded and installed it repeatedly; yet when I try to open certain images online or play certain Youtube segments, I get the message, "You must have Adobe Flash 11..." My computer tells me it is installed and running.
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often
kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007 -
I'm having trouble upgrading to ITunes v12.0.1 with
Win 7. Download progress bar stalls and eventually cancels itself. Have tried
Tools --> Download Only, but same result. Have been using iTunes for 3+
years without difficulty; I have lots of ram, hard drive and speed.
Thanks for your inputOne step listed in the link to "helpful" info, was (when Iooked 30 seconds ago), to search for and download the newest version of iTunes. I'm running iTunes on Win 7 machine and was prompted to update today, 10.22.2014, and did so without a problem. Having said that, however, it looks as though the latest iTunes (12.0.1.26) is finally doing what the last version refused to do, which is to actually fully populate all my playlists on my 6, but there is a hitch: 12.0.1.26 will NOT allow you to show the sidebar unless you click on "playlists," that is, you cannot keep it open all the time.
And, when plugging the 6 into the computer, the phone icon shows up but clicking on it does nada. What does work, for some strange reason, is clicking on the tiny icon (just under the "Store" menu link at top screen) which looks much like a tiny barrel, someone's idea of external drives, I suppose. The phone then comes up, with the list of stuff on the phone just under it where the sidebar used to be. Sync is now restricted to the lower right of the screen.
Apparently, you will also need to update your iPhone's software as well; some friends with the 4 and 4s, however, had troubles with them after upgrading. The message from Silicon Valley (I can see Apple from my backyard, ha ha) is apparently, "keep upgrading," folks, get rid of those old phones. -
Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps. -
I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned
Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?
-
I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.
Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data. -
I am having troubles with 3 things: scrolling with my laptop mouse, controlling my laptops volume with F9 and F10 keys, and I can not copy and paste images.
Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
volume controls issues are windows, not firefox.
How your copy and paste your image? from where to where -
I am having problems opening drop down boxes
i have photoshop elements 11 and have been having trouble with opening some of the drop down boxes, also i purchased the photoshop elements 11 book for some help but that seems to be different to the virson for photoshop is thatfor mac, i have windows
Moving this discussion to the Photoshop Elements forum.
Aaron which operating system are you using? Also can you please provide additional details regarding which drop down boxes you are referring too exactly? -
Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days agoThanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source. -
Create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box
HELP!!! Can anyone please provide some guidance on how to create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box.
I have a form which – based on the department that's selected from a drop-down box – will have different form fields/text boxes, etc, made available.
Is this possible in LiveCycle, if so, can you please provide the script/info - as needed.
Thanks,In the preOpen event of the second dropdown list you put something like (in formCalc):
if (dropdown1 == 1) then
$.clearItems()
$.setItems("Year, 2 Year, 3 Year")
elseif (dropdown1 == 2) then
$.clearItems()
$.setItems("3 Year, 4 Year")
endif -
Hebrew fonts from drop-down box not displaying in text box.
I am using InDesign CS 5.5 on a Mac 10.8.4.
When in ID, the fonts I am seeing on the Font dropdown menu when I try to use in a text box are not displaying correctly. They only display as boxes. The fonts are in the Hebrew language. They are properly installed in the FontBook.
Please help!! Thank you.Reema,
I followed most of your steps. I have a question reg. step 3 ie populating data in node 1.
Here is my code:
method WDDOINIT .
types: begin of zs,
zktokd type kna1-ktokd,
end of zs.
data: handle1 type ref to if_wd_context_node,
begin of zstruct,
zktokd type kna1-ktokd,
end of zstruct,
zitab type table of zs.
handle1 = wd_context->get_child_node( name = 'NODE1' ).
*select ktokd into corresponding fields of zstruct from kna1.
*append zstruct to zitab.
*endselect.
zstruct-zktokd = 'Sold-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Goods recipient'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
zstruct-zktokd = 'Bill-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Prospective Customer'.
append zstruct to zitab.
zstruct-zktokd = 'Competitor'.
append zstruct to zitab.
zstruct-zktokd = 'Sales partners'.
append zstruct to zitab.
zstruct-zktokd = 'Hierarchy Node'.
append zstruct to zitab.
zstruct-zktokd = 'Named List of Accounts'.
append zstruct to zitab.
zstruct-zktokd = 'Distribution center'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
handle1->bind_table( new_items = zitab ).
endmethod.
Please let me know if this is the best way to populate the node and then bind the table values from the node to the drop down box.
Thanks and Regards.
Maybe you are looking for
-
My iPad 2 is no longer charging
Since updating, my ipad does not work with the charger anymore. I have restarted and reset it, and still no luck.
-
[Crystal Reports 2008] - Logon failed in SAP system
Hi everybody, I have installed on my notebook Crystal Reports 2008 trial version and the Integration Kit for SAP Solutions that I found on this web page: https://boc.sdn.sap.com/node/18962 When I try to open a SAP Data Source, Crystal Reports finds t
-
Is it possible to force makepkg to use an alternative makepkg.conf file, which would have different flags?
-
I can not to received the email for verified by apple id
I can not to received the email for verified by apple id
-
Flash CS3 Mac/Win Projector Publishing - Using older version of Flash
Hi, How can I use an older version of Flash player when publishing to Man/Win Projector? The Properties says 'Player: 7' but when I publish to Mac/Win (.app/.exe) the file says it uses Flash player 9 (9.0.115.0)! One of our clients are having issues