Having Two MenuBarVertical - Problems
I have a site which I am using two spry 'MenuBarVertical'. In
most browsers the menus work just fine. However, in IE, the right
menu bar does not work (only the left).
I will explain what I did. I took the corresponding files
related to the 'MenuBarVertical' and duplicated it and renamed to
'_right'. I did this because I wanted the right menu to open on the
left side. I have categories which are taken from a MySQL database
and loops through and creates the menu. The left menu uses all the
files with '_left' and the right menu uses the files named
'_right'. Everything works on all browsers but for IE.
I have clicked on View Source on the site and made sure the
menu was setup and outputting correctly - and it is. Any
suggestions? Here is the site. The Products box on the top left and
right sides have the 'MenuBarVertical' integrated.
http://troxlerwest.ca/
1. Place 1 drop of rubbing alcohol on the home button.
2. Press the button repeatedly with pencil eraser making sure to get liquid into area surrounding button.
3. Dry off area with paper towel.
4. Press home button until it works again.
Similar Messages
-
Having TWO problems with my iPod mini.
I've had my ipod mini for a year and a half. I only ever use it 2-3 times a week for 30 mins at a time at the gym, and sometimes in the car. Already I'm having two problems.
Problem #1- Battery. I've noticed alot of other people on here seem to be having this problem aswell. I'll charge it fully and leave it in the charger over night. I disconnect it, Start playing it, and 1 or 2 songs later I get the message saying "battery low, please connect to power source" It just came OFF a power source. I have 2 different ways that I charge my ipod. I use the computer. And I have a clock radio that it sits in to play the ipod and charges it at the same time. It dosen't matter which I use.. I have the problem either way.
Problem #2- When the battery actually is working(which is rare) sometimes the music sounds like it's under water. Basically, The music plays, but with very low bass. I usually either listen to it through my car adapter, or through my headphones and I get the same problem either way. This isn't all the time though.
I've never dropped it, gotten it wet or left it in the sun. It's had no physical damage at all.
Does anyone know what may me going on? I've followed the steps and tips from other posts on the battery issue but nothing has worked for me. The only thing I can think of (and probably the only thing anyone can recommend) is that I send it in to get it repaired. However, I refuse to do that. I don't think I should have to pay to repair apple's 1.5 year old products especially since I paid close to $300 for it in the first place. I also don't want to receive a refurbished one, I want MINE fixed or a brand new one(which I know won't happen).
Any suggestions would be appreciated.1. Place 1 drop of rubbing alcohol on the home button.
2. Press the button repeatedly with pencil eraser making sure to get liquid into area surrounding button.
3. Dry off area with paper towel.
4. Press home button until it works again. -
"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on... -
My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE products. Please give any solution.
Is the MBP properly grounded? Are you using the three prong plug? If not, do so and your problems may disappear. If not, do what SwankPeRFection suggests.
Ciao. -
I'm having two problems. It's kind of complicated.
I'm having two problems. I've removed and re-installed Mozilla but am still having the same issues.
''edited by a moderator to add the information from More System Details.'' <br />
I'm having two problems. I've removed and re-installed Mozilla but am still having the same issues. Even to ask this question I had to use Internet Explorer, not Mozilla, because the dropdown won't appear on your home page. Ok. The two problems. One, vids won't play, and two, the dropdowns won't appear. Which means I can't sign out of anything! Which is an issue to me - I don't like leaving my accounts open. Can you help? Pleeease? I'm desperate! I've done all I know to do!
KariTry to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows -
Is it a problem having two different Ipod accounts on the same computer?
I have just bought an Ipod Nano for my wife. I have a 30 Gb Ipod my self.
My question is:
Is it a problem, having two different Ipod accounts on the same computer?
Are there something I should be aware of before connecting the second Ipod?
Windows XPhiya!
these resources might be of some help with your questions:
Natalie Beresford: multiple iPod/iTunes installations
How to use multiple iPods with one computer
iTunes: How to share music between different accounts on a single computer
love, b -
I am having a real problem with my MacBook Pro. While I am using Safari it is running really slowly and I am getting the rainbow circle a lot. Can someone give me some suggestions? I have no idea why it is so slow and it will not open any webpages.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am having the same problems as several posters here.
I am having the same problems as several posters here. My note 3 was pre-ordered and worked fine until may 16th of this year. This was the date of an ota upgrade to kitkat. After apps were "optimized" I first noticed such a power drain that my phone lasted 4 hours on standby without use. I uninstalled several apps including facebook which and rolled back google play services for several days. This helped my battery life which extended from 4 to 12 hours at low use. Previously, I could use the phone for nearly 48 hours without charging and using a number of apps which involved graphics, sound and data. Which leads to my next point, any graphically charged app (games generally) causes my phone to heat up tremendously and the phone leaks power like a sieve; again I reiterate this began may 16 with an ota update to kitkat which was rolled out by verizon MUCH later than other carriers but clearly didn't involve fixes. Finally, and the most nagging problem of all....my mobile connectivity has been shot. I have dropped calls, I have had to drive to get signal, I have missed calls and I cannot afford this!! I am a home health nurse and must be in contact with MD offices and patients. Even mobile connectivity in my home is affected as I have two bars at max. I have noticed the wireless indicator go from 0 to 5 bars in a rapid cycle 5 to 6 times in a few second period and result in "no mobile network found" if I try to call anyone. This service is unacceptable and I don't want to have to root my phone as I am not sure that this would fix the problem. This is a 700 dollar phone and I shouldn't have these problems. If a solution cannot be reached, I am under contract for another year and several months and I demand a new phone. I will be saving all communications (or lack thereof) via screen shot for documentation.
markaandersonco2006,
Have you tried wiping your cache partition? I noticed extremely poor battery life after the KK update, like you, (maybe 5 hours of use before requiring charging) and I saw a message on one of the Android Central forum (actually for the AT&T version of the Note 3) that mentioned to try wiping the cache partition. That appears to have worked. Since then, my battery life has been phenomenal. I don't know why this worked, or the downside of doing it. But it worked. As I write this, my battery is at 66%, and has been on for 14.5 hours (with one brief charge of 15 or so minutes in my car last night).
Wiping the Cache partition from Recovery Mode
This won't erase any important data. Perform the following procedure:
1) Turn off the device.
2) Press and hold the following three buttons at the same time:
a) Volume Up key
b) Home key
c) Power key
3) When 'GALAXY Note 3' appears on the screen, let go of the Power key but continue to press and hold the Volume Up key and the Home key.
4) When the Android System Recovery screen appears, release the Volume Up and Home keys.
5) Press the Volume Down key to highlight 'wipe cache partition.'
6) Press the Power key to select and wipe the cache.
7) With 'reboot system now' highlighted, press the Power key to restart the device.
Good Luck! -
I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?
I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!
-
I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?Could be that the servers are overloaded today.
-
I am having a painful problem with itunes 10, everytime I go everytime I go into the itunes store to search for a song, even if I type one letter Itunes will instantly launch into search mode and doesn't stop, so because I can never get past putting in the first letter or two, I'm unable to search and download any songs. I am on the latest Imac Intel core i7 Mac OS X, can anybody help?
Thankyou.
Beckyg.Having this problem too: IT'S REALLY REALLY ANNOYING!!! Anyone have an idea how to sort this?
-
Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank youWhat program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager? -
We have a 10 person office - all either use Acrobat XI or Reader XI. One person is on Windows 7. The rest are on Windows 8 (not 8.1). I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are all having problems opening pdf's sent to us from other firms. This has increased in frequency over the past two months. We've checked with the various firms, and their other clients are not having problems. Some pdfs open but with a lot of missing content and strange formatting, others won't open at all. There are different error messaged depending upon the doc. Some are regarding the fonts, for example "can't extract the embedded font...." Others are "insufficient data" errors. There are more, but for purposes of keeping this short, I won't include them. Another unrelated issue is that we are having trouble printing excel files to pdf. The files end up with bad formatting. I've worked with adobe "chat" support, our IT consultants with no resolution. I also haven't found any similar "known issue" online Would very much appreciate any assistance. Thank you
The font embedding can be a problem if not done and you are trying to view the PDF and do not have the font on your machine. Acrobat will often try to find a replacement, but it is not always a good choice. Sometimes the "Use Local Fonts" button can be changed in state to resolve some of the viewing issues.
If you are trying to copy or export info, then it is important that you have the fonts on your system. Otherwise, the message you are getting about embedded fonts would not be showing up.
As for Excel formatting, be sure that the Adobe PDF printer is selected in the printer screen before you look for the paging and formatting of the file. In most OFFICE programs, if you change the printer the application will reflow the document to best match the printer (called "using printer metrics"). So check before you create the PDF that the layout is correct. -
Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.
Your System Details are showing Fun Web Products. Suggest you look in Add-ons - Extensions and Plug-ins, and Control Panel>Add/Remove programs or >(newer version) Programs and Features. You could also do a search of your computer.
Fun Web Products(associated with MyWebSearch) always seems to cause problems, Alexa does, too, but less often - there may be conflicts.
I'm not an expert on these two products. I'm afraid I can only alert you to the problems. Google will show you plenty of evidence of problems. You might also try the Search Firefox Help box above - a gold mine but it usually requires a lot of digging.
You can start Firefox in Safe Mode - Hold Shift Key down as you double click on the Firefox icon>ignore the page that opens>Continue. If that improves things you could do a little troubleshooting(Safe Mode, Problematic extensions etc), use default theme, -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
http://support.mozilla.com/en-US/kb/Troubleshooting%20plugins -
My Client is having a serious problem with the Contact Form Widget
My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.
Maybe you are looking for
-
HT1339 Why can't I get my Ipod Music off of my Itunes account onto my Iphone????
Do i have to plug my Outdated Ipod onto my computer and then log in my Iphone?
-
CSS Bypassing farm traffic based on matching HTTP header
Hi, I am trying to find out whether the CSS is able to bypass specific traffic. I have an existing content to match all HTTP and send to a farm. However, there are some HTTP flows i dont want to goto the farm, i just want CSS to route them onward to
-
It seems that firefox installed correctly, but then it wouldn't open. I restarted my computer and still the same problem. I uninstalled it and reinstalled it and still the same problem.
-
Renaming NEF file no longer changes JPG file automatically (NOT BATCH RENAMING)
For the last year I have been able to select a file in Bridge under the 'Content' tab and in renaming an individual NEF file, Bridge would automatically change the corresponding JPG for me. Suddenly it no longer works and I have to change each file i
-
Can I work backward from APO CIF function module to ECC Integration Model
On our APO box, I have activated the "new-style" BAdI which is called by the CIF function module /SAPAPO/CIF_TLANE_INBOUND: CALL BADI lr_ref_cif_enhance->inbound_tlane How can I find out what the business analysts have to do in their ECC Integration