Header condition types and item condition type

Hello Gurus,
        this is a simple question. does the header condition types are totally same as item condition types ?
thanks very much!

hi,
header:
If this condition is marked as a header condition, it is possible to enter the condition type in the header condition screen. Checks for changing the condition manually are unaffected by this.
the header conditions calculate the header value
item :  conditions of this type are allowed to be entered in the document items. The condition is then only valid for the particular item in which it is entered.
item condition calculate at item level
(freight condition)for eg = HD00 is a header condition .here if you have 10 materials and this cond type calculates the freight charges for all the 10 items.
            KF00 is aitem condition.here system caliculates the freight charges only for that particular items.
Edited by: MANI ROOPA SD/MM on Apr 24, 2008 2:32 PM

Similar Messages

  • Header and Item Conditions

    Dear SAPers,
    I would like to know which the use of “header condition” and “item Condition” boxes is in the condition type customizing.
    Could someone explain me what are the effects of this boxes?
    Are the boxes related to the calculation that the system does in the sales order?
    I will reward if helpful.
    Thanks in advance,
    Gaspar

    Hi emilo
    As our friends said,already said , So  Header condiition types  apply for the entire document where as item condition applies to the particular line item i.e., material which you have entered in the line item.
    coming to the point , i hope X means checked for that feild where as
    " " means it is not checked .
    JIAP condition type as you said it is allowed  at  header level as well as item level .If it doesnt has any access sequence , you can enter manually at either item level or header level .
    But the JIAQ condition type is allowed only at header level and not at item level. so if you enter JIAQ condition type at item level in the sales order JIAQ condition type doesnt allow. it will throw an error message
    Reward if useful
    Regards
    Srinath

  • Header and Item Conditions in EBP PO

    HI All,
    I've just checked the pricing conditions in spro of SRM and as per my business requirement I need to maintain both header and item conditions and replicate the values back to r/3 in extended classic scenario like freight,surcharge,discounts e.t.c, with this functionality can we meet the requirement or any additional settings required,kindly advice me.
    Thanks and Regards,
    Sathya kumar.

    Hi,
    Header conditions in PO does not exist !
    You will have to develop it.
    Then you will have to use ECS BBP_ECS_PO_OUT_BADI for modifying the data you send to ECC PO in order to not send the whole price calculated into SRM but dispatch on one side the price before condition and on the other side the different condition type.
    The goal is that R/3 should be able to recalculate the final price based on the condition types you entered in SRM.
    Kind regards,
    Yann

  • Header and Item conditions in MIRO

    Hi All,
    There is a PO created with Import conditions .We have given some conditions in Header level (AED) and some conditions in Item level (Customs duty like SED..etc). We maintaind the vendor (customs-ABCD Vendor) in header conditions as well as  Item level conditions.
    As per the process, we are trying to create the Customs invoice(MIRO) for the PO.This vendor(ABCD Vendor) is FI vendor . While doing MIRO , same Vendor name is appearing two times for selection ."One" is for Item level Conditions and "another one" is for Header level conditions.
    We can select only one vendor, either Item level vendor or Header level vendor . If I select "one" vendor , it will give the item level conditions only..(Here vendor is same for Item and Header level).We can only select and process Item level conditions for that vendor.
    If I select "another one" vendor , it will give the header level conditions only..(Here vendor is same for Item and Header level).We can only select and process header level conditions for that vendor.
    Is there any setting to be done  to appear the header and item level conditions at a time  in MIRO Vendor (if Vendor is same ) in commercial Invoice ?
    Please provide SAP behaviour on these kind of scenerio...
    Thanks

    Hi,
    Header conditions in PO does not exist !
    You will have to develop it.
    Then you will have to use ECS BBP_ECS_PO_OUT_BADI for modifying the data you send to ECC PO in order to not send the whole price calculated into SRM but dispatch on one side the price before condition and on the other side the different condition type.
    The goal is that R/3 should be able to recalculate the final price based on the condition types you entered in SRM.
    Kind regards,
    Yann

  • RE: Header And Item Condition

    Hi
    How the system will put the value in my sales order if i select both Headre condition and item condition for one condition type in v/06. my question is for item condition we have to maintain condition record where in header we do not require.Will I have to enter the value manually in order or the system automatically determine it.
    And for For which condition type we select both Header and item Condition
    regards
    debasish

    Dear Stilianos,
    You can maintain item level condition type only.
    Henece you can maintain the values at item level based on your requirement.
    I hope this will help you,
    Regards,
    Murali.

  • Difference between alternative calculation type and alternative condition b

    What is the difference between alternative calculation type and alternative condition base value?

    Hi Nitin
    Alternative calculation type:
    Suppose my gross price (PB) is Rs.100 for some metal per kg and I want to calculate surcharge based on todays RBI index of commodity rather than simply giving some 2%. I want to account todays RBI index in determinig Condition value.
    It is possible to do that by little alteration of regular routine.
    Alternate Condition base value:
    I am procuring 5 different variety of pens at different quantities at varying rates from 0 to 25 in a sing le PO. And I get the total header value of 1000. I will get a discount of 10% if the PO value reaches 1000. I have to subsequently pass on the discount of Rs.100 now to all the 5 line items. In general SAP calculates it based on the values of each line item and proportionately distributes. However If i want this discount to be distributed according to the quantity of each pen. You can acheive this with little alteration of Routine.
    Hope this clarifies your doubt.
    If found helpful, Pls reward.
    Regards
    edwin

  • Difference between header and item movement types in MIGO

    Dear all,
    what is the difference between movement type entered in header of MIGO and item level?
    not all movements are possible in header. how it is controlled? may not be in OMJJ
    thanks and regards
    gajanan

    Hi Gajanan,
    Movement types in Standard SAP are predefined. You can also create a new movement type, but generally it is not required.
    In MIGO ,movement types on right hand side corner changes as per the transaction your are carrying out in header level like
    Good reciept, Good issue, , Cancellation, subsequent adjustment, Remove from storage, placer in storage etc.....
    As you go for transaction and make allocation in the allocation field, the movement type changes.
    Regards,
    Tushar Patankar

  • Alternative calculation type and alternative condition base value

    In pricing procedure what is the difference between alternative calculation type and alternative condition base value?Kindly help

    Hi,
    Please check the forum before you post your questions as this question was answered a number of times earlier.
    Please check the below link which discusses in detail regarding the same.
    [Alt Cal Type and Cond Base Value|Alternative calculation type and alterantive condition base value in pricin;
    Regards,
    Phani Prasad

  • Workflow with item type and item key  is in progress. Abort existing workfl

    Dear all,
    I'm using the below code from the submit button event to launch the workflow. The workflow works fine when I submit for the first time, when i try to submit for the second time from the same session it throws me the error as Workflow with item type and item key is in progress. Abort existing workflow.
    Where I am struck,Kindly send me any solution.
    I am using below code in oaf
    public void workflow(OAPageContext pageContext,
    String headerId,
    String empName,
    String userName
    String wfItemType = "XXSample";
    String wfProcess = "XXSample";
    String wfItemKey = headerId;
    OANavigation wfClass = new OANavigation();
    // Create Workflow Process
    wfClass.createProcess(pageContext, wfItemType, wfProcess, wfItemKey);
    System.out.println("Workflow created");
    wfClass.setItemAttrText(pageContext,
    wfItemType,
    wfItemKey,
    "XXHDRID",
    headerId);
    wfClass.setItemAttrText(pageContext,
    wfItemType,
    wfItemKey,
    "XXEMPNAME",
    employeeName);
    wfClass.setItemOwner(pageContext, wfItemType, wfItemKey,username);
    wfClass.startProcess(pageContext, wfItemType, wfProcess, wfItemKey);
    System.out.println("Workflow started");
    Thanks,
    Kumar.

    Item type and item key forms unique record for the workflow session, you cannot have 2 instances of the workflow running for the same header id, in your case. Check if the process exists for the header id. If so, display a warning message without launching another workflow session, else start the workflow process.
    Thanks
    Shree

  • Order type and Item category group

    Can anyone tell me which is the relation between order type and Item category group from material master ??
    In fact the problem is that I have created a material and when I want to create new sales order it gives me this errror:
    "No item category available (Table T184 ZORDER ZITGR)"
    Is there a tranzaction where I can assign Item category group ZITGR to sale order type ZORDER or something like that??
    What should i do?

    Hi Dan,
    Goto T-Code VOV4 and maintain the table
    Sales Doc type + Item Category Group + Usage + Higher level Item Category = Item Category
    TA + NORM + Nil + Nil = TAN
    If you have Customized your own Document Type and Item Category Group and Item Category then give your
    Sales Doc type (ZORDER)+ Item Category Group (ZITGR)+ Usage + Higher level Item Category = Item Category (ZTAN)
    Reward if helpful
    Regards PAVAN

  • Link material type and item category.

    Hi,
    Can you brief me on how following setting in SPRO works?
    Plant maintenance - Maintenance and service processing - Maintenance and service order - General data - Define default values for componenet item category
    When i checked, this setting is to link item category with the material type and item category is defined based on the material type and maintenance plant. But what is the relation in term of the order type i.e. whenever i create any order with a specifica order type, the default item category should get reflected on the componenets tab of the order?
    Is it possible?
    Can you guide me how to do this setting.
    Thansks

    Hi,
    Yes it is posible to make all order types item category mark as stcok item "L" as default value. Very well u can set it at following menu path under PM&CS Node
    Maintenance and Service Orders
    Functions and Settings for Order Types
    General Data
    Define Default Values for Component Item Categories
    Ramesh

  • Reqirement type and item category

    dear friends,
    can u please tell me the link between requirement type and item category?
    i want to use the special stock for the delivery and as well as purchase requirement in case stock is not there...
    i m getting the right combination.
    plzz help....

    Hi Deepak,
    This is strategy for Determining the Requirements Type
    .  First, an attempt is made to find a requirements type using the  strategy group in the material master.
    .  If the strategy group has not been maintained, the system will determine it using the MRP group.
    .  If the MRP group has not been defined, the system uses the material  type instead of the MRP group when accessing the corresponding control tables.
    .  If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the  item category and the MRP type.
    .  If this is not possible, a last attempt is made to find a requirements type with the item category only.
    .  If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
    Regards
    San

  • Disable the Item Availability Button based on Order type and Item category

    Hi ,
    My requirement is to disable the Item availability check button in VA01 based on the Order Type & Item category. Is there any user Exits/ Badi / FM available for this.
    Thanks in advance.
    Srinivas.

    Hi,
    Although it is an old post I need to answer for people who search an answer to the same type of question. To hide a field
    you can use transaction variant 'tcode:SHD0'. But it is not based on Order type and Item category. May be you can use
    USEREXIT_FIELD_MODIFICATION form in user-exit MV45AFZZ. You can loop at screen and set screen-active = 0 in fields
    where you want them to be inactive.

  • Order type, Invoice type and Item categories for Nota Fiscal Brazil

    Hi eveyone,
    we have a company in Brazil implemented in SAP using a different SD Order type, Invoice Type and Item categories
    as our mother company in Switzerland. Reason of that is because of the nota fiscal customization for Brazilian legal requirements.
    We startet with a Project worldwide to rollout a global template within sales and distribution and are facing now exactly
    the problem with those different order type, item categories and Invoice type.
    Our local SAP partner in Brazil told as based on best practise we should have different types.
    I checked the customization and it seems I can't use e.g.: the same Order type for Brazil and Switzerland because
    the activation flag for nota fiscal is linked to the order type and no sales organization can be setted to slplitt the different processes.
    Someone knows if there are some possibilities (maybe trough user exits or badi's) to use globally the same dovument types, item categoreis... globally?
    Thanks in advance
    Gaspare Guttadauro

    Hi Gaspare Guttadauro,
    I would strongly recommend to use the different document types and item categories as suggested by SAP. Since Brazil do have one of the complex taxation process in place hence to determine correct pricing the different document type will be required. Also functionalities  like CFOP determination and nota fiscal relevance can be maintained.
    Please feel free to revert the forum in case of any doubts.
    Cheers
    Atul

  • Difference between Material type and Item category

    What is the difference between Material type and Item category?
    We can differentiate different kind of materails according to material type then why do we have Item category which is also more or less on the same lines.
    Both can be considered as a terminology in SAP to group similar kind of materials.
    Please let me know the exact difference between the two?

    Dear Christino
    We can list out so many differences.
    When you create a material master record, the material type you choose determines:
    - Whether the material is intended for a specific purpose, for example, as a configurable material or process material
    - Whether the material number can be assigned internally or externally
    - The number range from which the material number is taken
    - Which screens appear and in what sequence
    - Which departmental data you may enter
    - What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both
    Together with the plant, the material type determines the material's inventory management requirement; that is:
    - Whether changes in quantity are updated in the material master record
    - Whether changes in value are also updated in the stock accounts in financial accounting
    In addition, the accounts affected by a material entering or leaving the warehouse depend on the material type.
    -Most importantly, Users can be authorized to create materials of specific material types but not based on item category
    - Item category will define whether the material should be valuated for stock or it should be considered as non-stock
    - Pricing is carried out based on Item Category and not based on Material type
    thanks
    G. Lakshmipathi

Maybe you are looking for