Hello how can i make one button work

hello , please
i would like to know if i have three buttons working but i need to make when i push one of them the others just don't work unless the first or the button i pressed finish its action
thx

Hi, redcrowdesign-
Part of the problem is that you're using ActionScript syntax in a JavaScript environment.  Instead of using _root, you can access the Stage object.  If your symbol is only one level down, you can use sym.getParentSymbol().stop("label");.  If you have a nested symbol, you may find sym.getComposition().getStage().stop("label"); more effective.
That being said, you might want to rethink your UI model and focus your iPad interactions on the touch events, which are much more performant than the mouse events.
Hope that helps,
-Elaine

Similar Messages

  • How can you make one button preform different actions in Xcode?

    How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

    Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
    I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

  • How can I make a button that on press the object appears and on second press the object to disappear

    Hello,
    I'm quite new to flash programing, and I don't know how can I make a button that will make the object appear and disappear.Till now I have this code for the appear:
    on (press)
        _root.top1.gotoAndStop(2);
        _root.topp.gotoAndStop(2);
        _root.mm1.gotoAndStop(2);
              _root.m1.gotoAndStop(2);
    but from here I'm stuck.
    Thank you for your help

    What you can do is use the _visible property of the object to make it appear and disappear, or more correctly, use the opoosite of the _visible property.  You should not put code "on" objects, keep it in the timeline.
    If "object" is the instance name of the object you want to toggle, then in the timeline code you can use...
    object._visible = false;  // start with the object being invisible
    yourButtonName.onRelease = function(){
        object._visible = !object._visible;
    That one line in the function sets the object's _visible property to be the opposite of what it currently is.

  • Hello, How can I make borders in pages?

    Hello, How can I make borders in pages?

    What version of Pages?
    Just make a suitable bordered shape and make it a Master Object in the background.
    PS. It is the sure fire way to make your work look amateur, which is why it is not in the Apple templates.
    Peter

  • How can I make a button "react"?

    This is probably a super silly question, but you know how it is, sometimes we sit on the answer and still can't find it... How can I make a button react to a click? I just want the simple effect of the button changing colors or looking like the user pushed it. Right now it's just the same old plain button, no matter if I click it or not, you can't really tell the difference. How can I give it the "pushing the button" effect? Thanks guys!

    You can choose image button and then choose from the available image buttons, or click on the folder icon when you select the image button and choose from the Gallery of Captivate 6.
    Few image buttons change color on hover or onclicked, these effects are predefined in them.
    Or you can edit that button on which you are working, from properties Panel.
    The Post and Cancel button on this thread seems like a transparent button in Captivate with different fill and stroke color, and transparency is also less, and with corner radius of 0.
    You will find these all optionns, when you will click on that button and then click on the properties panel.
    Thanks.

  • I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it).  Once updated and logged into my I-tunes it no longer works? How can I make those apps work?

    I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it).  Once updated and logged into my I-tunes it no longer works? How can I make those apps work?

    Apple doesn't have anything to do with this other than enforcing the DRM protection. The developers of this content expect to be paid if someone wants to use their content. When you purchase content in the app store, you purchase a license to use the content. This license does not permit you or anyone else to resell or give this content away. The individual you purchased the phone from simply does not have the right to sell or give away any purchased content on the phone. You were deceived.

  • My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton.  How can I make my Iphone work????

    My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton.  How can I make my Iphone work????  I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on.  It's been like this for three days now and I haven't stopped charging it.  IT just WONT charge?  Any tips I can use to solve the issue?
    -Esteban

    Hello estebie67,
    Thanks for the question, and welcome to Apple Support Communities.
    It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • Mountain Lion Recovery DVD - How can I make one, ML was installed on my iMac and BBP

    Mountain Lion Recovery DVD - How can I make one, ML was installed on my iMac and MBP when I purchased them. When I look at the App Store, it dose not show ML as purchased (to download again) - do I have to purchase it again to make a Recovery DVD?
    Thanks for your help.
    Regards
    NGI

    do i have to purchase it again to make a Recovery DVD?
    No. You can still make a bootable recovery DVD, but you will not be able to make a full bootable copy of ML without purchase.
    1) Enable the debug menu for Disk Utility via Terminal Application. Navigate to terminal by typing "terminal" in   spotlight. Copy the bolded text below and enter it into the command prompt:
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool true ; open -a "Disk Utility" ; exit
    2) From the Debug Menu > Select Show every Partition > Recovery HD should appear
    3) Right click (control + click) the Recovery HD partition and select "Mount"
    4) Right click again the partition again > "Reveal Recovery HD in Finder". Leave this window open
    5) At this point, you will need open terminal again and enter the following command:
    sudo chflags nohidden /Volumes/Recovery\ HD/com.apple.recovery.boot/BaseSystem.dmg ; exit
         Type your password when prompted.
    6) Navigate back to the Recovery HD finder Window > com.apple.recovery.boot > BaseSystem.dmg
    7) Drag "BaseSystem.dmg" into Disk Utility's sidebar.
    8) Insert your DVD
    9) Select "BaseSystem.dmg" in the sidebar and hit "Burn"
    Once the burn is completed, hold option down at startup and select the DVD to boot. This is a bootable Recovery partition, not a bootable copy of ML.
    Note: to disable the debug menu,
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool false

  • I bought an Apple Airport and the light is flashing a yellow light! I did this because I live in a basement and the modem is in the first floor. I followed the instruction manual and the Airport is not working still. how can I make my Airport work?

    How can I make the Airport work?

    If there is a modem and not a router on the first floor, then the only possible way to get it to work would be an Ethernet cable connection between the modem and the AirPort Express device.
    I think you need to describe your situation in more detail.

  • How can I make my buttons be gone forever?

    Just starting out with Flash and have run into a problem. I have several scenes with buttons that can be pressed once and then they disappear using:
    myBtn1.onRelease = function(){ this._visible=false}
    But when I go back to the scene the buttons reappear. How can I make my buttons be gone forever?

    if you have more than 1 button that should be made not visible at any given time, you'll need to use an array to store those button references.  otherwise, you can use:
    var alreadyRemoved:Boolean;
    if(alreadyRemoved){
    myBtn1._visible=false;
    myBtn1.onRelease=function(){
    this._visible=false;
    alreadyRemoved=true;

  • How can I make one list of all events I have in over 30 libraries I made

    How can I make one list of all events I have in over 30 libraries I made?

    The only way I know of is to take a screenshot of the Photo mode with the View ➙ Show Event Titles selected.  That will give you a list of sorts.  Might take more than one screenshot per library.
                   Click to view full sized
    OT

  • How can we make one object as synchronizable?

    Hi!
    I am new to java.How can we make one object as synchronizable?
    Thanx

    Synchronize is used to make an object and/or a functional sequence thread safe. By itself it does not make something thread safe.
    So the point is to make something thread safe not just to synchronize it.
    You can either sychronize a method like so....
          public synchronized void doit()
    Or you synchronize on an object (where 'Object' below is solely as an example, any object can be used)...
          Object lockObject = new Object();
          public void doit()
             sychronized (lockObject)

  • I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

    I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

    http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
    http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

  • How can I make my dictionary work?

    How can I make the dictionary work in my ipad2?

    there is no dictionary that comes with the ipad, you download a 3rd party app though.
    Was that your question?

  • How can I make Mail to work with hotmail?

    How can I make Mail to sync and work with hotmail, since hotmail is my primary mail provider, I have mail set up to work with g mail but the hotmail account is the one I use the most.

    You have to have a premium Hotmail account to allow for POP3, like Gmail has for free.

Maybe you are looking for