HELP: can't create datafile.
Hi, friends,
I installed Oracle 10.2.0 one hour ago.
Then I tried to create a tablespace.
In this tablespace, I add one datafile, the size is 5GB.
I used OEM to do this.
But I don't know why the creating procedure still running.
Based on my experience, it takes about 5 minutes to
add a 5GB datafile into a tablespace. Now, 40 minutes has
gone by, the program is still running.
What is the problem?
My system is Windows Server 2003, standard edition.
Thanks in advance.
Xiannian
Hi, friends,
I have a new finding about adding datafile to tablespace.
I can't add any datafile to any tablespace to my H drive,
either my created tablespace, or system-related tablespace,
except the TEMP tablespace.
That means, I successfully added datafile to TEMP tablespace with my
H drive.
But I can't add datafile to any other system-related tablespace, such as
SYSTEM, SYSAUX, USER, etc with my H drive.
My login has administrator previliges. I restarted the whole computer system
There is no any help.
Thanks.
Xiananian
Similar Messages
-
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
Help - Can't create an iTune's Store Account
Hi there,
I am desperately trying to create an iTunes Store account but am not to do so. I keep getting an error message saying I do not have a valid US or UK address.
I currently live in the UAE (United Arab Emirates), but can't seem to find it as one of the listed countries. What alternatives/options are there for iPod user's in Dubai who want to purchase music and goodies from an iStore
Any Suggestions welcome.Wait until an iTunes store is available in UAE.
-
Help: Can I create unique content in Dreamweaver and host it on Adobe?
I have been told that I cannot do this and I am asking for verification.
I am a CC subscriber so I have five Adobe hostings available.
What I want to know:
Is it correct that when I purchased the CC subscription and Dreamweaver with five site hostings, I cannot use Dreamweaver to create unique content and host it on the five hostings?
Why would Adobe sell Dreamweaver with all it’s capabilities and not support using it on the hostings that are sold as part of the package?
What I want to do:
Create very simple, unique content in Dreamweave. No commerce, just pages.
Publish it (test site is OK) to one of my available Adobe hostings.
Have it look just like I created it without any Business Catalysts templates or content.
What I have been told:
My five Adobe hostings are in Business Catalyst
I have to use Business Catalyst templates or my web site will not work
I cannot create unique content in Dreamweaver and use my Adobe hostings to post content entirely of my own design. I must conform to Business Catalyst.
What I have experienced:
I can create my content in Dreamweaver.
When I try to create a new Business Catalyst site in Dreamweaver using my content, Dreamweaver wants to download the lorem ipsum prefabricated placeholder content and overwrite my work.
I can mitigate this by unchecking a box but it won’t allow me to use my content.
When I push up (put) my content, it appears to transfer up
After a few seconds, the files on the server are zroed out (zero byte size).
My content is not on the web server.
What I have not tried but will do next:
Create a New Business Catalyst Test site in Dreamweaver.
Allow Dreamweaver to download the site content.
Strip out all of the prefabricated junk.
Build my content.
Push (put) it up.
See if it works.
This is a pain.Hey there, Please see my replies to you in another colour below:
I have been told that I cannot do this and I am asking for verification.
Adobe - No, Business catalyst - yes. Adobe is not Business Catalyst, Bussiness Catalyst is owned by Adobe and is a website CMS sollution and hosting for that.
I am a CC subscriber so I have five Adobe hostings available.
Business Catalyst WEB BASIC sites
What I want to know:
Is it correct that when I purchased the CC subscription and Dreamweaver with five site hostings, I cannot use Dreamweaver to create unique content and host it on the five hostings?
No of course you can, You build your site as you want and upload to BC. You just need to note that the sites will be only the web basic plan so limited features.
Why would Adobe sell Dreamweaver with all it’s capabilities and not support using it on the hostings that are sold as part of the package?
Dreamweaver has full integration with Business Catalyst - You have been told incorectly.
What I want to do:
Create very simple, unique content in Dreamweave. No commerce, just pages.
Totally fine
Publish it (test site is OK) to one of my available Adobe hostings.
Get out of your head "Adobe hosting" it is Adobe business catalyst
Have it look just like I created it without any Business Catalysts templates or content.
If you have raw static html and css files etc in pages - this will work. This is the wrong way to build a site but you can do so if you want to.
What I have been told:
My five Adobe hostings are in Business Catalyst
Yes that is correct
I have to use Business Catalyst templates or my web site will not work
Not true. Now there are templates you can use to build your sites. The other "template" term you will here are the templates you use in your site builds, pages and other elements use - Layout control - change once, update many.
I cannot create unique content in Dreamweaver and use my Adobe hostings to post content entirely of my own design. I must conform to Business Catalyst.
The concept of creating content in Dreamweaver is not correct. You should be desining your site and then build it in Dreamweaver and then you manage the content using Business Catalyst.
What I have experienced:
I can create my content in Dreamweaver.
You can but you shouldnt, you should build the site elements in DW.
When I try to create a new Business Catalyst site in Dreamweaver using my content, Dreamweaver wants to download the lorem ipsum prefabricated placeholder content and overwrite my work.
I do not use DW to build my BC sites so not sure what is happening there. It shouldnt, sounds like your syncing not uploading files.
I can mitigate this by unchecking a box but it won’t allow me to use my content.
To remove the cross syncing for the web basic creative cloud sites for people in muse there is an option in Site settings you need to tick, I am guessing you need to do this too.
After a few seconds, the files on the server are zroed out (zero byte size).
You will need to contact Business Catlayst support on this one -
Help; can't create new picture
Im trying to create a new picture for my account
i go to system preferences
click "accounts"
i go to my account
i click the lock, type my password so the lock will unlock
i go to pictures
click edit
drag my picture into there
format it (size, location etc.)
i click "set"
now on the left theres a little bar with all of the accounts, right?
there beside my account name i see the old picture
beside the edit button on the right i see the new picture
if i close the box or if i click the lock, the picture goes back to the old picture
???well, you're not alone. i've got the same problem, but never had this problem on mhy imac g4 also running tiger. i hope apple is reading this.
-
Hi all,
I am doing some kind of testing in my test maching and I faced the following situation.
I have a good control file and all the archives starting from the 1st scn. Now I brought down the instance and physically deleted a datafile and tried bringing up the db. This time it couldnt open the db as a file is missing, so I created the datafile and gave the recover database command and things opened up fine. No I backed up the ctrl file to trace and brought down the instance. Now I deleted my controlfile and recreated it successfully by using the script that I got from trace and tried the datafile drop and recreate trick as before, but in this case I couldn't create the datafile. Can anybody explain me why is this behaviour?KRIS wrote:
Version is 11.2.0.1.0
OS is Red Hat Enterprise Linux Server release 5.5
As told earlier I tried to create the deleted datafile and this is the error I got.
13:20:44 SQL> alter database create datafile 4 as '/oracle/abhi/data/users.dbf'; alter database create datafile 4 as '/oracle/abhi/data/users.dbf'
ERROR at line 1:
ORA-01178: file 4 created before last CREATE CONTROLFILE, cannot recreate
ORA-01110: data file 4: '/oracle/abhi/data/users.dbf'
I can understand the error, but I want to understand what happens internally under such circumstances and why such a datafile recovery is not allowed in oracleonly you can re-create datafile without backup in archivelog mode, the datafile creation should be less than the control file creation time.
if you re-create the control file then you cannot use the command "alter database create datafile" .
you can use only for the datafiles created after control file creation time.
check:-
SQL> select creation_time,name from v$datafile;
CREATION_ NAME
17-APR-07 D:\ORACLE\PRODUCT\10.2.0\ORADATA\DEMODB\SYSTEM01.DBF
17-APR-07 D:\ORACLE\PRODUCT\10.2.0\ORADATA\DEMODB\UNDOTBS01.DBF
17-APR-07 D:\ORACLE\PRODUCT\10.2.0\ORADATA\DEMODB\SYSAUX01.DBF
17-APR-07 D:\ORACLE\PRODUCT\10.2.0\ORADATA\DEMODB\USERS01.DBF
27-JUL-11 D:\ORACLE\PRODUCT\10.2.0\ORADATA\DEMODB\EXAMPLE01.DBF
27-JUL-11 D:\ORACLE\PRODUCT\10.2.0\ORADATA\DEMODB\USER02.DBF
6 rows selected.
6 rows selected.
SQL> select controlfile_created from v$database;
CONTROLFI
27-JUL-11 -
How can I create an active table of content in the sidebar to help readers to get to the section?
How can I create an active table of content in the sidebar to help readers to get to the section?
You can create bookmarks with Adobe Acrobat.
-
How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?
Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side. -
NEED HELP! can't create mysql connection in DW MX 2004
I re-format my computer last week and after reformatting i
install my PHP Triad and Dreamweaver MX 2004, but i can't create
mysql connection using DW wizard, i already follow the step:
1. create / manage site
2. choose document type
3. set up testing server ( i use php mysql @ localhost)
and when i create new connection (fill the hostname,
username, password, and select databases) it failed and show
message "unidentified error occur".
it never happen before (before i re format my computer).
can anyone help me how to solve this problem.
sorry for my bad english i came from Indonesia,
thx before
rgrds
zhastroI re-format my computer last week and after reformatting i
install my PHP Triad and Dreamweaver MX 2004, but i can't create
mysql connection using DW wizard, i already follow the step:
1. create / manage site
2. choose document type
3. set up testing server ( i use php mysql @ localhost)
and when i create new connection (fill the hostname,
username, password, and select databases) it failed and show
message "unidentified error occur".
it never happen before (before i re format my computer).
can anyone help me how to solve this problem.
sorry for my bad english i came from Indonesia,
thx before
rgrds
zhastro -
Can't create PDFs from Word due to Cambria font. Help.
I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post. -
Hi , my problem is that i can only create absolute links to other pdf-files in a main pdf-file. how can i switch to or create relative links. Thanks for help!
I’m using version 11.0.10. So where the Menu resides in a folder ready to be burnt on to a CD, that same folder is where the links point to.
Thanks -
Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?
Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
HT2534 I can't create my apple if without credit carf can any one help me ?
I can't create my apple if without credit carf can any one help me ?
I can't create my apple if without credit carf can any one help me ?
-
Can we create serach help for a selection screen field
Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
MaveAT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
DESCR LIKE BKPF-BKTXT,
END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'DESCR'
DYNPPROG = gd_repid
DYNPNR = '1000'
DYNPROFIELD = 'paymeth'
VALUE_ORG = 'S'
DISPLAY = ' '
TABLES
value_tab = DESCR_TAB.
endform.
Svetlin -
Can't create new sites in Dreamweaver CS3. Help!
I am trying to create a new site in Dreamweaver CS3 but keep
getting the following error:
"The action cannot be completed because the other program is
busy.
Choose 'Switch to' to activate the program and correct the
problem"
I have tried every documented solution on the adobe website
and other discussion forums and still cannot get past the problem.
I have restarted the IIS server on my local PC as documented
on the following adobe technote:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16485&sliceId=2
Other things I have done:
1. I have followed all the advice in the links at the bottom
of the above page.
2. I have created a new user, logged into that and tried
creating a site with a "virgin" environment
and I still have the problem.
3. I have gone into the registry and renamed the site
configuration info in case something was corrupted.
This removed all my site configurations. No help!
4. I have turned of my firewall and restarted the IIS
server.
5. I have searched the web for anything even remotely
similar to this error and tried every tip out there.
I called Adobe and they referred me back to the technote
above, which I had already tried.
One last bit of info. I can't create new sites, but I can
edit web pages in my existing sites. However, I cannot change the
configuration of the website in the Manage Sites area (i.e. I can't
push the Edit button).
Has anyone had this problem? Any help would be appreciated. I
have hit a brick wall on this one and am trying to meet a deadline
on a new website I need to create.
If I can't find a solution quick, I will be an
ex-Dreamweaver user. That saddens me because I really like
Dreamweaver, but I have to perform on my job.And are you running Skype?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Murray *ACE*" <[email protected]> wrote
in message
news:ga4hba$bnv$[email protected]..
> What is your firewall?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Steven A" <[email protected]> wrote in
message
> news:ga4ejo$8nb$[email protected]..
>>I have rebooted many times. Actually, I am the only
user that ever logs
>>in.
>> This is happening on my laptop. I just created
another user to see if it
>> was a
>> corruption issue with sites tied to my regular
login.
>>
>>
>>
>
Maybe you are looking for
-
Using RB00 condition type for Price Adjustment
Hi, I have to do a price adjustment due to some rounding issues in the pricing of my sales order.(Using standard Pricing Procedure RVAA01). I am thinking of using manual condition type RB00 at Item level that can accept both positive and negative val
-
Installation says my Full version is an update when I enter serial number to install.
I have a Full New version of CS3 I need to install on an old computer. The installation says that it is an update but it is not. I have another full CS3 and they are the same in every way. I am not new to the Adobe experience.
-
Please tell me how to password lock my messages only.
How can I secure my messages only with password lock or any app please let me know
-
Iphoto won't import new photos from ipad
It showed 20 photos which I then imported into iPhoto from my iPad. But there are MANY more which have not been previously imported into iphoto How can I get those photos FROM my iPad into iPhoto on my mac?????
-
Outputting xml using style sheet.
Hi all, hope you can help with this issue, if not back to the drawing board. I'm generating some XML wich will be transformed into XSLFO using an XSL stylesheet. The problem is that my generated XML contains values that have < and > tags, hence the t