Help! Compiling error

Hello guys!
I',m having this bizare compiling error in the following code:
Stirng test = "Test ; test ; test";
String[] tests = test.split(";");
System.out.printLine(tests.lengh());First off it highlights tests.length() and says in cannot find symbol, second When I compile it anyways it says ERROR, incompatible source code.... Thanks alot for your help
best regards
Michel

mbehlok wrote:
Hello guys!
I',m having this bizare compiling error in the following code:
Stirng test = "Test ; test ; test";
String[] tests = test.split(";");
System.out.printLine(tests.lengh());First off it highlights tests.length() and says in cannot find symbol, second When I compile it anyways it says ERROR, incompatible source code.... Thanks alot for your help
best regards
Michel
String test = "Test ; test ; test";
String[] tests = test.split(";");
System.out.println(tests.length);
In Java, there is no length() method i Array Class. It is a property. So, use like this.....
Edited by:Mrityunjay Kumar on Oct 31, 2009 4:15 PM

Similar Messages

Can't Export Movie - Unknown Compile Error - Help!

I edited a 32 minute movie in Premiere Elements 10, and now I'm trying to export it. At some point during the export, and it seems to vary, I get an unknown compile error. I've been trying to export the movie for the past week and all I get is failure despite trying just about everything I've found written about how to solve this.
I have Win 7 Ultimate SP 1 running on a Lenovo desktop machine with an Intel Core 2 Quad CPU at 2.67 GHz, 4GB of RAM, 32 bit proc.
Premiere is installed on system C drive with 6 GB of free space.
Project and scrach disks are on D drive with 165 GB of free space.
Media files are on 2nd E drive with 50GB of free space.
Project and most source material is NTSC DV -- there are quite a few photos with motion, plus some iPhone HD video on the timeline, hundreds of clips in all plus narration, a few titles, etc.
Export destination folder is on D drive.
Everything will render to green lines atop timeline (sometimes it quits during render and I have to keep hitting Enter to continue rendering, but eventually it's all green)
So far I've tried:
- Reinstalling PE 10
- Reinstalling Quicktime
- Copying all the photos to their own separate folder
- Editing each photo slightly (outside of PE 10) and resaving to make sure none of the photos are corrupted
- Emptying the temp folder
- Deleting all the renders and cache files and letting them rebuild
- Exporting small pieces of the timeline to try to identify a bad clip -- this is a maddening process and I did find one clip that would generate the error, but I managed to export that to AVI and reimport and replace on timeline. It would be awfully nice if PE would just TELL ME which clip it doesn't like if in fact it's a clip error.
- Turning off the shadow / highlight feature I had on some clips, but this wasn't the issue, smaller sections with these clips exported fine
- Tried exporting to various formats: Vimeo SD, MPEG DV Standard, iPad Standard High Quality, AVI -- all result in the same error (the format I want by the way is Vimeo SD)
- Rebooting the machine and turning everything off that might possibly consume memory
This machine has never had problems exporting in the past. One thing I did try that worked -- installed PE 10 on another (less capable) Win 7 machine, and fed it all the media via an external drive. The other machine did the export fine (though it took a while given it is underpowered). This is nothing more than a work around though as I don't normally have access to this machine and I'm not done editing.
I'm at my wits' end! What else can I do to get this movie file to export?
Appreciate any help or clues you can provide to solve this mystery.

Oh, that is tragic!
I never had any issues with mine. Maybe it knew how respectful I was, having come from manual rewinds and a sync block? The Moviola was a godsend, at least for me. I am glad that I got to edit film, and on many setups, as some of that translated well to digital Video. Back when I was in film school, Video was 2" tape, and the only editing was by cutting at a 45 degree angle, and splicing the tape. There was not even deck-to-deck editing, way back then. Also, Video looked like crap, at least to my eyes. We could only use a switcher, to "edit," or do a feed to air. Looked like crap!
As for the Lexus, I can imagine all sorts of problems. My new LX-570 requires me to "Accept," when I put it into reverse, on the rear-view monitor! At least my wife's MB does not require that, but it is a 2011 model, so maybe the 2013 models will require that the user sign off on all sorts of "stuff."
Now, I can play Finding Nemo, for my rear-seat passengers, while driving, but the front-seat passengers cannot see it, which is just fine. When driving, I am not even a fan of hands-free calls, and declined most of the streaming stock quotes, etc. for XM/Sirius radio. NOT while I am driving. I will save that for reading the WSJ in the club at the airport.
Some years ago, our driver in London got a new BMW 7-series, and it allowed the playing of DVD's, even in the front, while driving. Not sure that I would want that, but such is life. At least his seats' ventilation system was "well-chilled," where ours' are just air. He almost froze my bum, showing off his new auto.
Now, working with PS, or PrE in an auto, or even on a mobile device, is just not something that I can wrap my old head around. I want a fast computer, with a big display, and cannot imagine editing Images, or Video, on any handheld (or auto) device.
Hunt

Help with Data Block Based on Procedure--getting compilation error

I am trying to create a datablock based on a procedure , but im getting errors in compilation:
Errors are :
1) identifier 'HSM_WSH_DEL_UTIL.DEL_TBL' must be declared
2)PL/SQL ERROR 320 at line 7, column 27
the declaration of the type of this expression is incomplete or malformed
ANy Help would be appreciated !
Heres my pkg spec and body for the data block:
CREATE OR REPLACE PACKAGE hsm_wsh_del_util IS
TYPE del_record is record
(delivery_id number);
TYPE del_tbl is table of del_record INDEX BY BINARY_INTEGER;
procedure do_query(p_del IN OUT del_tbl);
END hsm_wsh_del_util ;
CREATE OR REPLACE PACKAGE BODY hsm_wsh_del_util IS
procedure do_query(p_del IN OUT del_tbl)
IS
idx number :=1;
CURSOR DELIVERY IS
SELECT DELIVERY_ID
FROM abc_deliveries;
begin
FOR CUR IN DELIVERY LOOP
p_del(idx).delivery_id :=cur.delivery_id;
idx:= idx+1;
END LOOP;
end do_query;
END hsm_wsh_del_util;
Edited by: 981170 on Mar 13, 2013 1:08 PM

Hi,
Yes I did use the wizard,
I agve it the package.proc name for query.
it pulled up the field delivery ID,
Hit finish, because I do not need update/delete/inserts.
the query data source columns and arguments was defaulted correctly.
THe QUERY-PROCEDURE was built by default.
It is giving me an error though: wrong number or types of arguments in call to POPULATE_BLOCK..
DECLARE
bk_data HSM_WSH_DEL_UTIL.DEL_TBL;
BEGIN
hsm_wsh_del_util.do_query(bk_data);
PLSQL_TABLE.POPULATE_BLOCK(bk_data, 'NEW_DELIVERIES');
END;

Procedure created with compilation errors. help?

SQL> create or replace procedure p_update_audit_log
2 ( p_audit_id audit_log.audit_id%type
3 p_grade_update audit_log.grade_update%type
4 p_grade audit_log.grade%type
5 sys_date
6 p_user_id audit_log.user_id%type
7 is
8 BEGIN
9 insert into audit_log (user_id, audit_id, grade, grade_update,
10 sys_date)
11 values (p_user_id, p_audit_id, p_grade, p_grade_update, sys_date);
12 END p_update_audit_log;
13
14
15
16
17
18 /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE P_UPDATE_AUDIT_LOG:
LINE/COL ERROR
3/1 PLS-00103: Encountered the symbol "P_GRADE_UPDATE" when expecting
one of the following:
:= ) , default character
The symbol "," was substituted for "P_GRADE_UPDATE" to continue.
4/1 PLS-00103: Encountered the symbol "P_GRADE" when expecting one of
the following:
:= ) , default character
The symbol "," was substituted for "P_GRADE" to continue.
5/1 PLS-00103: Encountered the symbol "SYS_DATE" when expecting one
LINE/COL ERROR
of the following:
:= ) , default character
The symbol ", was inserted before "SYS_DATE" to continue.
7/1 PLS-00103: Encountered the symbol "IS" when expecting one of the
following:
:= ) , default character
The symbol ")" was substituted for "IS" to continue.
Could anyone help me with this problem?

These are syntax errors:
Try this
create or replace procedure p_update_audit_log
( p_audit_id audit_log.audit_id%type,
p_grade_update audit_log.grade_update%type,
p_grade audit_log.grade%type,
sys_date DATE,
p_user_id audit_log.user_id%type)
is
BEGIN
insert into audit_log (user_id, audit_id, grade, grade_update,
sys_date)
values (p_user_id, p_audit_id, p_grade, p_grade_update, sys_date);
END p_update_audit_log;

Warning: View altered with compilation errors. : Please help.

Hi All,
Found few views invalid, tried to compile them, but got the following error. It looks like synonyms are calling each other.
Please help to compile the view.
=======================
SQL> alter view APPS.PER_ADDRESSES_AV12 compile;
Warning: View altered with compilation errors.
Checked error:
SQL> SHOW errors VIEW APPS.PER_ADDRESSES_AV12;
Errors for VIEW APPS.PER_ADDRESSES_AV12:
LINE/COL ERROR
0/0 ORA-01775: looping chain of synonyms
Extracted DDL:
==========
CREATE OR REPLACE FORCE VIEW "APPS"."PER_ADDRESSES_AV12" ("ROW_KEY", "ADDRESS_
ID", "TOWN_OR_CITY") AS
SELECT ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES_A WHERE TOWN_OR_CI
TY IS NOT NULL OR SUBSTR(AUDIT_TRUE_NULLS,12,1)='Y' UNION ALL SELECT 99991231235
9591111122222 ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES
Checked synonyms for the base table:
=======================
OWNER SYNONYM_NAME TABLE_OWNER TABLE_NAME
PUBLIC PER_ADDRESSES HR PER_ADDRESSES
APPS PER_ADDRESSES HR PER_ADDRESSES
XXHRC PER_ADDRESSES APPS PER_ADDRESSES
Edited by: 784786 on Dec 22, 2011 7:27 AM

784786 wrote:
Found few views invalid, tried to compile them, but got the following error. It looks like synonyms are calling each other.
Please help to compile the view.
SQL> alter view APPS.PER_ADDRESSES_AV12 compile;
Warning: View altered with compilation errors.
SQL> SHOW errors VIEW APPS.PER_ADDRESSES_AV12;
Errors for VIEW APPS.PER_ADDRESSES_AV12:
LINE/COL ERROR
0/0 ORA-01775: looping chain of synonyms
CREATE OR REPLACE FORCE VIEW "APPS"."PER_ADDRESSES_AV12" ("ROW_KEY", "ADDRESS_
ID", "TOWN_OR_CITY") AS
SELECT ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES_A WHERE TOWN_OR_CI
TY IS NOT NULL OR SUBSTR(AUDIT_TRUE_NULLS,12,1)='Y' UNION ALL SELECT 99991231235
9591111122222 ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES
OWNER SYNONYM_NAME TABLE_OWNER TABLE_NAME
PUBLIC PER_ADDRESSES HR PER_ADDRESSES
APPS PER_ADDRESSES HR PER_ADDRESSES
XXHRC PER_ADDRESSES APPS PER_ADDRESSESso break the chain by dropping one or of them

Help with compilation error

Hello
I have a problem with my jsp developement. When i create a jsp (with no beans) i test it and it runs fine (not good but fine), then when I test it with multiple users at time, it generate a jsp compilation error ie. "missing term }" and I can not figure out why it is getting that error, it has been compilated before! so it should not generate a compilation error, becouse i'm not editing the jsp source. I think that every time the jsp is requested the virtual machine is re-compiling it, but is only what i thing and i don't know why... can any body help me? please.
I apologize for my bad english
Thank you for your time reading this.

Sorry becouse i can't be more espesific with the error that i get, that error is complete apears in a complete randomic way, I mean taht it apears when nerver is expected or doesn't apear when is expected, only thing that i got of that error is that the compiler some time says that are mising semi-colon (;), some time says that are mising quotation marks (") or are mising }, the error is no the same allways no mater the situation, I can run the jsp in my pc but the error doesn't apear, thats very strange becouse the compilation error apear after the jsp was executed with no errors.
this is my jsp:
<%@ page import="java.util.Calendar,java.text.SimpleDateFormat,java.util.Date,java.util.Stack,java.util.Enumeration, java.util.Hashtable,java.sql.*, java.util.Vector" %>
<%@ include file="../incs/dbpool_inc.jsp" %>
<%@ include file="funciones.jsp"%><html>
<head>
<title>Resolver preguntas</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link href="../css/0001.css" rel="stylesheet" type="text/css">
</head>
<body>
<% //to get user data from the session.
     String userid = session.getAttribute("idu") != null ? (String)session.getAttribute("idu") : "";
     String asign = session.getAttribute("idHomeAssignatura") != null ? (String)session.getAttribute("idHomeAssignatura"): "";
     String idcuest = session.getAttribute("idcuest") != null ? (String)session.getAttribute("idcuest") : "";
     String secuenc = session.getAttribute("secuenc") != null ? (String)session.getAttribute("secuenc") : "";
     String secuens = request.getParameter("secuens") != null ? request.getParameter("secuens") : "0";
     //to know if it's aloww to save cahnges in the database
     boolean guardar = request.getParameter("guardar") != null ? (request.getParameter("guardar")).equals("si")? true: false :false;
     if(userid.equals("")|| asign.equals("")){//if 1
          out.println("</head><body><font face=\"Arial\" size=\"2\" color=\"#000000\"><b>El tiempo de conexión ha expirado. Para ingresar de nuevo al sistema haga click aquí.</b></font></body></html>");
     }//fin if 1
     else{//else de if 1
          try{// try 1
               Connection conn = dbpool.getConnection();
               Statement stmtt = conn.createStatement();
               Statement stmtmod = conn.createStatement();
               Statement stmtresp = conn.createStatement();
               ResultSet rsmodul = stmtmod.executeQuery("select id_modulo from eit_cuestxmat where id_cuestionario="+idcuest);
               String modulo = rsmodul.next()? rsmodul.getString("id_modulo"): "";
               rsmodul.close();
               stmtmod.close();
               int secuencia1 = Integer.parseInt(secuens);
               int secuencia2 = Integer.parseInt(secuenc)+1;
               secuenc = (secuencia1 == secuencia2)? String.valueOf((Integer.parseInt(secuenc)+1)): secuenc;
               session.setAttribute("secuenc", secuenc);
               if(esAlumno(userid, stmtt, asign)){//if 2
               if(guardar){//if 2.0
                         String idpreg1 = request.getParameter("idpregunta") != null ? request.getParameter("idpregunta") : "";
                         ResultSet rstipop = stmtt.executeQuery("select tipo from eit_pregunta where id_pregunta="+idpreg1);
                         String tipop1 = rstipop.next()? rstipop.getString("tipo") : "";
                         rstipop.close();
                         String respuesta = "N/A", correspondencia ="";
                         String restado="n";
                         String rcorrecta = "n";
                         if(tipop1.equals("selec")){
                              correspondencia = request.getParameter("rprevia") != null? request.getParameter("rprevia") : "-1";
                              ResultSet rscorrecta = stmtt.executeQuery("select escorrecta from eit_opciones where id_pregunta="+
                                                       idpreg1+" and id_opcion="+correspondencia+" and escorrecta like 's'");
                              if(rscorrecta.next()){
                                   rcorrecta = "s";
                              rscorrecta.close();
                         else{
                              if(tipop1.equals("empar")){
                                   ResultSet rsempar = stmtt.executeQuery("select escorrecta from eit_opciones where id_pregunta="+
                                                            idpreg1+ "order by orden");
                                   int corres = 0;
                                   int correctas = 0;
                                   while(rsempar.next()){
                                             String resp = request.getParameter("selopc"+String.valueOf(corres+1)) != null? request.getParameter("selopc"+String.valueOf(corres+1)) : "";
                                             correspondencia=correspondencia+((corres == 0)? "":",")+resp;
                                             correctas = correctas + (resp.equals(rsempar.getString("escorrecta"))? 1 : 0);
                                             corres++;
                                   rcorrecta = String.valueOf(correctas);
                                   rsempar.close();
                              else{
                                   if(tipop1.equals("complet")){
                                        ResultSet rscomplet= stmtt.executeQuery("select correspondencia from eit_opciones where id_pregunta="+idpreg1);
                                        String complet = rscomplet.next()? rscomplet.getString("correspondencia"):"";
                                        rscomplet.close();
                                        String complet1 = "";
                                        int idxcar = complet.indexOf("$");
                                        respuesta = request.getParameter("comp0") != null ? request.getParameter("comp0") : "";
                                        correspondencia = request.getParameter("comp1") != null ? request.getParameter("comp1") : "";
                                        int corrc =0;
                                        if(idxcar>=0){
                                             complet1 = complet.substring((idxcar+1),complet.length());
                                             complet = complet.substring(0, idxcar);
                                             corrc = (respuesta.equalsIgnoreCase(complet))? 1 : 0;
                                             corrc = (correspondencia.equalsIgnoreCase(complet1))? (corrc+1) : corrc;
                                             rcorrecta = (corrc==2)? "s": (corrc==1)? "m": "n";
                                        }else{
                                             corrc=(respuesta.equalsIgnoreCase(complet))? 1 : 0;
                                             rcorrecta = (corrc==1)? "s": "n";
                                   else{
                                        if(tipop1.equals("abierta")){
                                             respuesta = request.getParameter("respuesta") != null? request.getParameter("respuesta") : "";
                         String guardarResp = "insert into eit_respuesta(id_pregunta, id_cuestionario, id_materia, id_modulo"+
                                                  ", respuesta, correspondencia, rcorrecta, restado, sec_pregunta, codest)"+
                                                  " values ("+idpreg1+", "+idcuest+", '"+asign+"', "+modulo+", '"+respuesta+"', '"+correspondencia+"', '"+rcorrecta+"', '"+restado+"', "+
                                                  String.valueOf((Integer.parseInt(secuenc)-1))+", "+userid+")";
                         String sqlexistencia = "select id_pregunta from eit_respuesta where codest ="+userid+" and id_cuestionario="+idcuest+" and id_materia="+
                                                       asign+" and id_modulo="+modulo+" and id_pregunta="+idpreg1;
                         boolean existeResp = (stmtt.executeQuery(sqlexistencia)).next();
                         String editarResp = "update eit_respuesta set respuesta='"+respuesta+"', correspondencia='"+correspondencia+"', "+
                                                  "rcorrecta='"+rcorrecta+"', restado='"+restado+
                                                  "' where codest ="+userid+" and id_cuestionario="+idcuest+" and id_materia like '"+
                                                  asign+"' and id_modulo="+modulo+" and id_pregunta="+idpreg1;
                         //if the page is editing execute string editarResp else execute string guardarResp
                         stmtt.executeUpdate(existeResp? editarResp:guardarResp);
                    String sqlbpu="select p.enunciado, p.tipo, p.titulo, p.id_pregunta from eit_pregunta p, eit_prexcuest pxc where pxc.id_cuestionario="+idcuest+" and pxc.id_pregunta = p.id_pregunta and pxc.secuenc= "+String.valueOf(secuenc);//bupu: buscar pregunta cuestionario
                    //System.out.println("resolvpreg.jsp "+sqlbpu);
                    ResultSet rsbpu = stmtt.executeQuery(sqlbpu);
                    if(rsbpu.next()){ // if 2.1
                         String enunciado = rsbpu.getString("enunciado");
                         String tipo = rsbpu.getString("tipo");
                         String titulo = rsbpu.getString("titulo");
                         String idpreg = rsbpu.getString("id_pregunta");
%>
<h1 align="center"><font color="#0033CC" face="Arial, Helvetica, sans-serif"><%=titulo%></font></h1><br>
<p align="left"><font face="Arial, Helvetica, sans-serif">
<strong>Enunciado:</strong> <%=enunciado%>. </font><br>
<%
     String sqlrespuesta = "select respuesta, correspondencia from eit_respuesta where id_pregunta="+idpreg+
" and id_cuestionario = "+idcuest+" and id_materia like '"+asign+"' and id_modulo="+modulo+" and codest= "+userid;
     ResultSet rsrespuesta = stmtresp.executeQuery(sqlrespuesta);
     String sqlopcs= "select opcion, escorrecta, correspondencia, orden from eit_opciones where id_pregunta ="+idpreg+"order by orden";
     ResultSet rsops = stmtt.executeQuery(sqlopcs);
%>
<%String letras = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
     Vector opciones = new Vector();
     Object obj[] = new Object[4];
     while(rsops.next()){
          obj[0] = rsops.getString("opcion");
          obj[1] = "";
          obj[2] = rsops.getString("correspondencia");
          obj[3] = rsops.getString("orden");
          opciones.addElement(obj.clone());
     rsops.close();
%>
<form action="resolverpreg.jsp" method="post" name="Correspondencias">
<%
     String respEmpar = "";
     String respuestap="";
     String respcorres[] = {"",""};
     if(rsrespuesta.next()){
          respuestap = rsrespuesta.getString("respuesta");
          respEmpar = rsrespuesta.getString("correspondencia");
          respcorres[0]= respuestap;
          respcorres[1]= respEmpar;
     rsrespuesta.close();
     if (tipo.equals("empar")){
%>
<%@ include file="resolvempar.jsp"%>
<%}//fin if tipoPreg = 'emapar'
     else{
     if(tipo.equals("selec")){
%> <%@ include file="reslovselec.jsp"%>
     <%}//fin if tipopreg = 'select'
     else{
          if(tipo.equals("complet")){%>
          <%@include file="resolvcomplet.jsp"%>
     <%}//fin if tipopreg='complet'
     else{
          if(tipo.equals("abierta")){%>
          <%@include file="resolvabierta.html"%>
          <%}//fin if tipopreg='abierta'
          else{%>
               <span class="titolForum">Error: no se ingresó ningún tipo de pregunta
               o se est� accediendo en forma errónea a este sitio.</span>
          <%}//fin else de tipopregunta = 'abierta'%>
     <%}//fin else tipopreg='complet'%>
     <%}// fin else de tipopreg = 'select'%>
<%}//fin else de tipoPreg = 'emapar'%>
<br>
<input name="idpregunta" type="hidden" value="<%=idpreg%>">
<input name="guardar" type="hidden" value="si">
<input name="secuens" type="hidden" value="<%=(1+(Integer.parseInt(secuenc)))%>">
<input type="submit" name="continuar" value="Continuar">
</form>
<%                    rsbpu.close();
                    }//fin 2.1
                    else{%>
Ha terminado de realizar la prueba<br>
<a href="elejCuestion.jsp">Continuar</a>
<%}
               }// fin if 2
               stmtt.close();
               stmtresp.close();
               conn.close();
          }// fin try 1
          catch(Exception expt){
               out.println("Error: "+expt);
     }//fin eles de if 1
%>
</body>
</html>

Please help suggestions for solving built-only compiler error: 'The VI is not executable. The full development version of LabView is required tofix this error.'

We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
As the editor and its compiler do not see the error and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
Our project comprises hundreds of Vis over several libraries.
Thanks,
Chris

Thanks Craig for all your suggestions.
We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
We will post about this in detail after we have positively proven that this actually was the case.
The .net version issue was already checked.
Performance was the same on all machines we tested on including the dev machine.
Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
In relation to your remark:
'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
Ragrds,
Chris

Help needed for compiling error URGENT

Hello,
I have been looking at this compilation error for a while and I cannot figure it out.
I am compiling with this command:
javac -classpath classes -sourcepath src -d classes src\pshah3\library\gui\GraphicalGui.java
The error is:
C:\java\hw5>javac -classpath classes -sourcepath src -d classes src\pshah3\library\gui\GraphicalGui.java
src\pshah3\library\gui\GraphicalGui.java:32: error while writing <anonymous pshah3.library.gui.GraphicalGui$1>:classes\pshah\library\gui\GraphicalGui$1.class
(The system cannot find the path specified)
public void actionPerformed(ActionEvent e) { System.exit
(0); }
Why is it telling me that it cannot find the path, when it has to create the .class file itself?
I would appreciate some insight into this problem?
Thanks,
Premal

Thank you for you help, but i'am still a bit confused. The "pshah" was a typo, it should have been pshah3, so that's not the problem. Here's a more detailed explanation of what i'am trying.
I am declaring the exitlister class in the following path:
c:\java\hw5\src\pshah3\library\gui
The file is fairly simple, it looks like this.
package pshah3.library.gui;
import java.awt.*;
import java.awt.event.*;
public class ExitListener extends WindowAdapter{
     public void windowClosing(WindowEvent event) {
          System.exit(0);
The other file that i'am including is in the same location...it starts out like this.
package pshah3.library.gui;
import pshah3.library.*;
import java.io.*;
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
class GraphicalGui {
          public static void main (String[] args){
          JFrame backGround = new JFrame("Tech Library");
          backGround.setSize(400,150);
          backGround.addWindowListener (new ExitListener());
          Container content = backGround.getContentPane();
I am compiling from the c:\java\hw5 directory with the command
javac -classpath classes -sourcepath src -d classes src\pshah3\library\gui\GraphicalGui.java
I am doing this so all the classes go in a "classes" directory with the same heirarchy as the source.
Do you think i'am doing something funky with the packages??
Again the error is:
src\pshah3\library\gui\GraphicalGui.java:39: error while writing <anonymous pshah3.library.gui.GraphicalGui$1>: classes\pshah3\library\gui\GraphicalGui$1.class
(The system cannot find the path specified)
public void actionPerformed(ActionEvent e) { System.exit
(0); }
THANKS A LOT!!!

Need help determining compiling error

Good morning,
I need help finding the cause of a compiling error I receive. I have reviewed my code numerous times without any luck. I hope you guys might see something I am not! The entire file exceeds the limit I can post, so I am attaching it in 2 posts. Sorry for the inconvenience. The error and my code are posted below. Thank you for your help!
C:\StockTrackerDB.java:382: cannot find symbol
symbol : method add(java.lang.Boolean)
location: class java.util.ArrayList<java.lang.String>
               aList.add(new Boolean(rs.getBoolean("admin")));
^
1 error
Tool completed with exit code 1
import java.io.*;
import java.sql.*;
import java.util.*;
public class StockTrackerDB
     private Connection con = null;
     //Constructor; makes database connection
     public StockTrackerDB() throws ClassNotFoundException,SQLException
          if(con == null)
               String url = "jdbc:odbc:StockTracker";
               try
                    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               catch(ClassNotFoundException ex)
                    throw new ClassNotFoundException(ex.getMessage() +
                                "\nCannot locate sun.jdbc.odbc.JdbcOdbcDriver");
               try
                    con = DriverManager.getConnection(url);
               catch(SQLException ex)
                    throw new SQLException(ex.getMessage()+
                                "\nCannot open database connection for "+url);
     // Close makes database connection; null reference to connection
     public void close() throws SQLException,IOException,ClassNotFoundException
          con.close();
          con = null;
     // Method to serialize object to byte array
     private byte[] serializeObj(Object obj) throws IOException
          ByteArrayOutputStream baOStream = new ByteArrayOutputStream();
          ObjectOutputStream objOStream = new ObjectOutputStream(baOStream);
          objOStream.writeObject(obj); // object must be Serializable
          objOStream.flush();
          objOStream.close();
          return baOStream.toByteArray(); // returns stream as byte array
     // Method to deserialize bytes from a byte array into an object
     private Object deserializeObj(byte[] buf) throws IOException, ClassNotFoundException
          Object obj = null;
          if(buf != null)
               ObjectInputStream objIStream = new ObjectInputStream(new ByteArrayInputStream(buf));
               obj = objIStream.readObject(); //IOException, ClassNotFoundException
          return obj;
     // Methods for adding a record to a table
     // add to the Stocks Table
     public void addStock(String stockSymbol, String stockDesc) throws SQLException, IOException, ClassNotFoundException
          Statement stmt = con.createStatement();
          stmt.executeUpdate("INSERT INTO Stocks VALUES ('"
                                +stockSymbol+"'"
                                +",'"+stockDesc+"')");
          stmt.close();
     // add to the Users table
     public boolean addUser(User user) throws SQLException,IOException,ClassNotFoundException
          boolean result = false;
          String dbUserID;
          String dbLastName;
          String dbFirstName;
          Password dbPswd;
          boolean isAdmin;
          dbUserID = user.getUserID();
          if(getUser(dbUserID) == null)
               dbLastName = user.getLastName();
               dbFirstName = user.getFirstName();
               Password pswd = user.getPassword();
               isAdmin = user.isAdmin();
               PreparedStatement pStmt = con.prepareStatement("INSERT INTO Users VALUES (?,?,?,?,?)");
               pStmt.setString(1, dbUserID);
               pStmt.setString(2, dbLastName);
               pStmt.setString(3, dbFirstName);
               pStmt.setBytes(4, serializeObj(pswd));
               pStmt.setBoolean(5, isAdmin);
               pStmt.executeUpdate();
               pStmt.close();
               result = true;
          else
               throw new IOException("User exists - cannot add.");
          return result;
     // add to the UserStocks table
     public void addUserStocks(String userID, String stockSymbol)
                    throws SQLException,IOException,ClassNotFoundException
          Statement stmt = con.createStatement();
          stmt.executeUpdate("INSERT INTO UserStocks VALUES ('"
                                +userID+"'"
                                +",'"+stockSymbol+"')");
          stmt.close();
     // Methods for updating a record in a table
     // updating the Users table
     public boolean updUser(User user) throws SQLException, IOException, ClassNotFoundException
          boolean result = false;
          String dbUserID;
          String dbLastName;
          String dbFirstName;
          Password dbPswd;
          boolean isAdmin;
          dbUserID = user.getUserID();
          if(getUser(dbUserID) != null)
               dbLastName = user.getLastName();
               dbFirstName = user.getFirstName();
               Password pswd = user.getPassword();
               isAdmin = user.isAdmin();
               PreparedStatement pStmt = con.prepareStatement("UPDATE Users SET lastName = ?," + " firstName = ?, pswd = ?, admin = ? WHERE userID = ?");
               pStmt.setString(1, dbLastName);
               pStmt.setString(2, dbFirstName);
               pStmt.setBytes(3, serializeObj(pswd));
               pStmt.setBoolean(4, isAdmin);
               pStmt.setString(5, dbUserID);
               pStmt.executeUpdate();
               pStmt.close();
               result = true;
          else
               throw new IOException("User does not exist - cannot update.");
          return result;
     }

     // Methods for deleting a record from a table
     // delete a record from the Stocks table
     private void delStock(String stockSymbol) throws SQLException,IOException,ClassNotFoundException
          Statement stmt = con.createStatement();
          stmt.executeUpdate("DELETE FROM Stocks WHERE "
                                +"symbol = '"+stockSymbol+"'");
          stmt.close();
     // delete a record from the Users table
     public void delUser(User user) throws SQLException,IOException,ClassNotFoundException
          String dbUserID;
          String stockSymbol;
          Statement stmt = con.createStatement();
          try
               con.setAutoCommit(false);
               dbUserID = user.getUserID();
               if(getUser(dbUserID) != null) // verify user exists in database
                    ResultSet rs1 = stmt.executeQuery("SELECT userID, symbol "
                                          +"FROM UserStocks WHERE userID = '"+dbUserID+"'");
                    while(rs1.next())
                         try
                              stockSymbol = rs1.getString("symbol");
                              delUserStocks(dbUserID, stockSymbol);
                         catch(SQLException ex)
                              throw new SQLException("Deletion of user stock holding failed: " +ex.getMessage());
                    } // end of loop thru UserStocks
                    try
                    { // holdings deleted, now delete user
                         stmt.executeUpdate("DELETE FROM Users WHERE "
                                          +"userID = '"+dbUserID+"'");
                    catch(SQLException ex)
                         throw new SQLException("User deletion failed: "+ex.getMessage());
               else
                    throw new IOException("User not found in database - cannot delete.");
               try
                    con.commit();
               catch(SQLException ex)
                    throw new SQLException("Transaction commit failed: "+ex.getMessage());
          catch (SQLException ex)
               try
                    con.rollback();
               catch (SQLException sqx)
                    throw new SQLException("Transaction failed then rollback failed: " +sqx.getMessage());
               // Transaction failed, was rolled back
               throw new SQLException("Transaction failed; was rolled back: " +ex.getMessage());
          stmt.close();
     // delete a record from the UserStocks table
     public void delUserStocks(String userID, String stockSymbol) throws SQLException,IOException,ClassNotFoundException
          Statement stmt = con.createStatement();
          ResultSet rs;
          stmt.executeUpdate("DELETE FROM UserStocks WHERE "
                                +"userID = '"+userID+"'"
                                +"AND symbol = '"+stockSymbol+"'");
          rs = stmt.executeQuery("SELECT symbol FROM UserStocks "
                                     +"WHERE symbol = '"+stockSymbol+"'");
          if(!rs.next()) // no users have this stock
               delStock(stockSymbol);
          stmt.close();
     // Methods for listing record data from a table
     // Ordered by:
     //          methods that obtain individual field(s),
     //          methods that obtain a complete record, and
     //          methods that obtain multiple records
     // Methods to access one or more individual fields
     // get a stock description from the Stocks table
     public String getStockDesc(String stockSymbol) throws SQLException, IOException, ClassNotFoundException
          Statement stmt = con.createStatement();
          String stockDesc = null;
          ResultSet rs = stmt.executeQuery("SELECT symbol, name FROM Stocks "
                                                  +"WHERE symbol = '"+stockSymbol+"'");
          if(rs.next())
               stockDesc = rs.getString("name");
          rs.close();
          stmt.close();
          return stockDesc;
     // Methods to access a complete record
     // get User data from the Users table
     public User getUser(String userID) throws SQLException,IOException,ClassNotFoundException
          Statement stmt = con.createStatement();
          String dbUserID;
          String dbLastName;
          String dbFirstName;
          Password dbPswd;
          boolean isAdmin;
          byte[] buf = null;
          User user = null;
          ResultSet rs = stmt.executeQuery("SELECT * FROM Users WHERE userID = '" +userID+"'");
          if(rs.next())
               dbUserID = rs.getString("userID");
               dbLastName = rs.getString("lastName");
               dbFirstName = rs.getString("firstName");
               // Do NOT use with JDK 1.2.2 using JDBC-ODBC bridge as
               // SQL NULL data value is not handled correctly.
               buf = rs.getBytes("pswd");
               dbPswd=(Password)deserializeObj(buf);
               isAdmin = rs.getBoolean("admin");
               user = new User(dbUserID,dbFirstName,dbLastName,dbPswd,isAdmin);
          rs.close();
          stmt.close();
          return user; // User object created for userID
     // Methods to access a list of records
     // get a list of selected fields for all records from the Users Table
     public ArrayList listUsers() throws SQLException,IOException,ClassNotFoundException
          ArrayList<String> aList = new ArrayList<String>();
          Statement stmt = con.createStatement();
          ResultSet rs = stmt.executeQuery("SELECT userID, firstName, lastName, admin "
                                             +"FROM Users ORDER BY userID");
          while(rs.next())
               aList.add(rs.getString("userID"));
               aList.add(rs.getString("firstName"));
               aList.add(rs.getString("lastName"));
               aList.add(new Boolean(rs.getBoolean("admin")));
          rs.close();
          stmt.close();
          return aList;
     // get all fields in all records for a given user from the UserStocks table
     public ArrayList listUserStocks(String userID) throws SQLException, IOException, ClassNotFoundException
          ArrayList<String> aList = new ArrayList<String>();
          Statement stmt = con.createStatement();
          ResultSet rs = stmt.executeQuery("SELECT * FROM UserStocks "
                                                  +"WHERE userID = '"+userID+"' ORDER BY symbol");
          while(rs.next())
               aList.add(rs.getString("symbol"));
          rs.close();
          stmt.close();
          return aList;
}

Urgent: Form Compilation Error using frmcmp.sh on OAS 10.1.2, pls help..

Hi All,
I am upgrading from OAS 9.0.4 to 10.1.2 where Forms 10g application is deployed.
When I try to recompile with frmcmp.sh :
frmcmp.sh userid=system/oracle123@odb module_type=FORM module=menu1.fmb
I get errors :
Compiling Procedure GET_PATH...
Compilation error on procedure GET_PATH:
PL/SQL ERROR 201 at line 4, column 32
Identifier 'APPS_MENU1_DET' must be declared
PL/SQL ERROR 0 at line 4, column 3
SQL Statement ignored
Compilation error have occured.
Form not created
What cause this error ?
FYI, on the above compilation I connect to different database/schema, not the one
which is used by the Form, is this the reason of th error ?
During compilation, Do I have to connect to the database/schema I used when develop the form ?
DO I have to create all tables in the schema first before compilation ?
Tnank you for your hwlp,
xtanto
PS. When I compile the same Form with F90genm.sh on OAS 9.0.4, NO ERROR.

From my experience it's a really bad idea to install OCS into a AS IM. When it comes to upgrades and patches you'll pull your hair out!
Why not install OCS first and then install the BI into the OCS AS server... I have not checked the certification matrix but that might be a better solution to look into.

Help please for compilation error

I have made an utility app.
I have used CFHTTPMessageRef class from CoreServices.h
This works fine with me for Simulator.
Now when i change Active SDK to Device it gives compilation error :
1) No such file or directory : <CoreServices/CoreServices.h>
2) Syntax error before CFHTTPMessageRef.
While reading i came to know that CoreServices is available only for Simulator and not for device(Correct me if wrong).
I also added CFNetwork framework for linking in build settings.
Can anybody suggest something on this...

Hi, i've used some types like CFHostRef in one of my apps, so it should work. I will look into the sourcecode to see what headerfiles i've included.
i'll be back later this day.

Help- Components Throwing Compile Errors

Thank you for reading my issue. I am using Flash CS3.
Recently, all my projects began throwing compile errors for
standard component AS3 code.
UI Component, FLVPlayback.
I have uninstalled and reinstalled Flash CS3, but to no
avail. Problem persists
I keep getting errors involving "QNAN", which I think
involves trapping for a non-numeric value, or something.
As a test, I created a new Flash doc, placed an instance of
FLVPlayback on the stage, pointed it to a .FLV file in the same
directory.
Errors on compile:
1093: Syntax error.
1084: Syntax error: expecting rightparen before QNAN.
1093: Syntax error.
1084: Syntax error: expecting rightparen before QNAN.
And so on, I get 5 sets of the same errors for different
functions.
The first offending function above reads:
function queueCmd(param1:VideoPlayerState, param2:Number,
param3:Number = 1.#QNAN) : void
if (param1.cmdQueue == null)
param1.cmdQueue = new Array();
}// end if
param1.cmdQueue.push(new QueuedCommand(param2, null, false,
param3));
return;
}// end function
I get similar errors from my UI component AS3 as well.
I have not touched the shipped AS3 for these components. What
gives?
Any ideas?
Thanks
Tim

Thanks, by the way to everyone who has offered thoughts so
far.
xchanin - I've encountered issues with the FLVPlayback
component as well as various of the UI components.
I tried some example applications (from the web) not too long
ago and this issue popped up shortly there after.
But, I'm having issues with even a simple Flash with a single
FLVPlayback instance and one .flv.
There is nothing in the class path for my test file and the
root .as files open from the Flash install when I click the compile
errors in the output window.
So, it really looks like I somehow corrupted those files. I
read a post somewhere that someone had "strange invisible
characters" show up in their .as that were throwing errors.
I thought a clean install would do the trick.
I may completely isolate the example files I was using and
try another reinstall... that's about all I can think of at the
moment.
This has been a couple week search for a solution. I have a
real project coming up an need to solve this.
Thanks for any input! (I assume I can't call Adobe for an
assist as I'm still on CS3 ;)
Tim

Help with compiling error

Okay, so I've been making a cash register app, and the thing isn't compiling for me. I keep looking over this and I'm not sure why it isn't working, so I was hoping someone could point out what I've done wrong here.
public class Receipt
        public static void main(String[] args) throws IOException
                int q;
                RetailItem retail = new RetailItem("Description", 1, 10.00, 10.00);
                Scanner keyboard = new Scanner(System.in);
                System.out.println("Enter quantity: ");
                q = keyboard.nextInt();
                CashRegister receipt = new CashRegister(retail, q);
                FileWriter fwriter = new FileWriter("SalesReceipt");
                PrintWriter outputFile = new PrintWriter(fwriter);
"Receipt.java" 31L, 835C                                     1,1           Top
import java.util.Scanner;
import java.io.*;
public class Receipt
        public static void main(String[] args) throws IOException
                int q;
                RetailItem retail = new RetailItem("Description", 1, 10.00, 10.00);
                Scanner keyboard = new Scanner(System.in);
                System.out.println("Enter quantity: ");
                q = keyboard.nextInt();
                CashRegister receipt = new CashRegister(retail, q);
                FileWriter fwriter = new FileWriter("SalesReceipt");
                PrintWriter outputFile = new PrintWriter(fwriter);
                outputFile.println("\tSALES RECEIPT");
                outputFile.println("Unit Price: $" + retail.getRetail());
                outputFile.println("Quantity: " + q);
                outputFile.println("Subtotal: $" + receipt.getSubtotal());
                outputFile.println("Sales Tax: $" + receipt.getTax());
                outputFile.println("\nTotal: $" + receipt.getTotal());
        outputFile.close();
~
~
~
~
~
~
~
~
~
~
~
~
~
~
                                                                                                                                              1,1           All

You know, the compiler errors also give you more detail than "isn't compiling for me". Do you expect people here to compile it for you to see the error you're already seeing and witholding?

Compilation error..Please Help

I had recently installed the jdk1.3 (Win ME version). I have no problem with my path variable although I doubt the classpath variable setting, which is given as follows.
D:\java\p_java>set classpath=%classpath%;D:\java\jdk1.3.1_02\jre\lib;D:\java\jdk1.3.1_02\lib\
where p_java is my java programs directory
jdk1.3.1_02 is the Java 2 SDK directory.
Problem
Whenever a java program is compiled, the very same error of "Access Denied" is displayed. This can be seen in the foll. examples.
Example 1:
D:\java\p_java>javac Statik.java
)Statik.java:3: error while writing Statik: Statik.class (Access is denied
class Statik{
^
1 error
Example 2:
D:\java\p_java>javac Stack.java
)Stack.java:1: error while writing Stack: Stack.class (Access is denied
public class Stack
^
1 error
Request
Could anyone tell me whether the classpath variable has to be set explicitly as in 1.2 version or leave it alone.( in case I don't have any user-classes.
I would be very obliged if u could suggest a possible remedy for this compilation error.
Awaiting a solution,
Thankz,
Preeti

This looks like a file creation problem. The only reason I can think why this might occur, given the information you have supplied, is that the files Statik.class and Stack.class already exist, and are read-only. Have you perhaps copied this example from a CD-ROM? If so, select all the files, right-click, choose properties and clear the read-only checkbox.
If this isn't the case, I'm afraid I can't think of anything else.
Robin

OCCI Compile Error.. Please Help me....

I'm Developing on the Compaq Tru64 Unix Version 5.1b
I'm attempting to compile/link Oracle OCCI demo using Tru64 cxx with no success
Compile error:
cxx: Warning: /pdms_appl/oracle/product/rdbms/demo/occiObjects.h, line 119:
function "oracle::occi::PObject::operator new(std::size_t, void *)"
has no corresponding operator delete (to be called if an exception
is thrown during initialization of an allocated object)
void operator new(size_t size, void adctx);
--------------^
cxx: Warning: /pdms_appl/oracle/product/rdbms/demo/occiObjects.h, line 116:
function "oracle::occi::PObject::operator new(std::size_t, const
oracle::occi::Connection *, const std::string &, const char *)" has
no corresponding operator delete (to be called if an exception is
thrown during initialization of an allocated object)
void operator new(size_t size, const Connection x,
--------------^
Runtime Error:
PDMS_pdms.bitekic.co.kr:/pdms_appl/oracle/product/rdbms/demo> occipool
resolve_symbols: loader error: dlopen: libocci.so.9.0: symbol "OCIPSetObjectPtrNull" unresolved

I think you can ignore the compilation warnings.
For the unresolved symbol error while running the OCCI app, can you try static linking of the application with libocci9.a & libclntst.a ? e.g :-
make -f demo_rdbms.mk buildocci_static EXE=occipool OBJS=occipool.o
Regards,
Shankar

Help! Compiling error

Similar Messages

Maybe you are looking for