Help for a change in ownership

I gave my husband my old iPad when I got a new one. He wants to delete all of my "stuff" on there, but when he does, all of the "stuff" on my new iPad and iPhone gets deleted also. He has his own Apple ID now. How can he delete "stuff" without me losing mine.

He should restore the device as New.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
After Restore has completed you will be prompted to restore as New or from a backup. Choose "New."

Similar Messages

Help for find/change glyphs script

Hi everyone!
I need help for creating a script (or modifying existing script) that should replace every Cyrillic character from an old ASCII font with the same Cyrillic character but from new Unicode font.
For example: Capital letter 'A' GID=107 from old font (Lazurski) should be replaced with 'A' GID=630 from new one (Myriad Pro).
I can do this by using Indesign Find/Change - Glyphs, but this will take me too much time.
So, I need a scrip for this job.
My first attempt was to use the FindChangeByList script by modifying the FindChangelist.txt document, but without success.
Here is what I've used until now:
1) glyph {glyphID:107, appliedFont:"Lazurski"} {glyphID:630, appliedFont:"Myriad Pro"} {caseSensitive:false, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false}
2) glyph {findWhat:"u00C0", appliedFont:"Lazurski", fontStyle:"Bold"} {changeTo:"0410", appliedFont:"Myriad Pro", fontStyle:"Bold"} {caseSensitive:false, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find ASCII A replace with Unicode A.
Both lines didn't change anything. What is wrong?
Any help is welcome!
Regards,
Veselin
P.S. Indesign CS5

Thank you Jongware!
The codes (both ID and Unicode) are correct for sure, but even with correct notation (obviously my was wrong) the script don't change anything.
Here is the line in the FindChangeList:
text {findWhat:"\u00C0", appliedFont:"Lazurski", fontStyle:"Bold"} {changeTo:"\u0410", appliedFont:"Myriad Pro", fontStyle:"Bold"} {caseSensitive:false, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find ASCII A replace with Unicode A.
Update:
Finally, I found what is wrong with the script - the properties "caseSensitive:false".
By removing that properties the script works fine.
So, I successfully converted a book with old ASCII Cyrillic font to Unicode Opentype font.

Need help for profile change in pdf

Hello every one,
I have so many files need to change color profile, maintain 240% ink coverage for this client can supplied me only pdf files. How can I change color profile in acrobat professional? I know only method of Photoshop Profile change UCR, GCR..240%, please help me some one.
More information:
I have windows 7 operation system, acrobat 7 with pitsop7.
Thanks in advance,
Regards,
Siva

i have a separate DTD for my own XML i want to extract my PDF files to that
XML is it possible may i know how the acrobat export as xml feature works

Help with iPad change of ownership

Hi. My son got a iPad the original from his workplace when a coworker was fired. he wants to be able to use it for apps,books etc.....but when the password comes up it has the old workers email and what ever his password was......can he try and change all this past ownership to make it his own at home or does he have to stop in a apple store? Thanks ......cherrie

Settings>General>Reset>Erase all content and settings

Help for runtime change in list item

hi
i have created a tabuler form and have list_items on it
i want when i
select category monitor then in next list i get monitor's serial numbers
in next record when i select printer then in next list i get printer's serial numbers
i had tried it on first list WHEN_LIST_CHAGE it work for the first time but when i select another category then it generate an error can not create record group a (a is the name of the record group which i had created for the first time )
similarlay with other categories
plz help me

In your code, you should check if the record group already exists. If it does, delete it first before creating it again.
RG := FIND_GROUP('a');
IF NOT ID_NULL(RG) THEN
DELETE_GROUP(RG);
END IF;
RG := CREATE_GROUP('a'); -- or use CREATE_GROUP_FROM_QUERY
(RG is a variable declared to be of type RECORDGROUP, and "a" is the name of your record group.)

How to change search help for standard field in me51n.

hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswas

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Change Search Help for Payment Terms Field

Hi,
I would like to change the Search Help for Payment Terms Field, in Customer Master (KNVV-ZTERM). and in Sales Document. I believe it is the same.
Default is From Table T052 / T052U
ZTERM and TEXT1 Fields
I would like to have
From Table TVZBT
ZTERM and VTEXT
PayT Own Explanation Field.
Can we change the Search Help.

Hi,
The search help for the payment terms is not coming from the DDIC search help..
It is coded in the process on value-request event...
The function module FI_F4_ZTERM is called for this..you have to change this function module in case if you want the values from a different table..
OR do implicit enhancement in the subroutine FORM HELP_ZTERM in the include MF02DFH0 to call your search help instead of the function module FI_F4_ZTERM ..And do the same for the sales order also..
Thanks
Naren

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Change search help for each line of a web dynpro table

Hi all i have got the following code to dynamically change the search help of a single field on a web dynpro app and was just wondering if anyone could show me the code for implementing it onto a table so that the same field on each row has a different search help assigned to it!
CALL METHOD node_info->set_attribute_value_help
EXPORTING
name = 'DEPT'
value_help_mode = '121'
value_help = 'PREMN'.
Regards
Mart

Hi,
it is possible to have different search help for same table column for different context elements i.e. table lines. the way to acheive this is by using cell variants in table column.
Steps to follow:
1. In your table column insert cell variant. Depending upon number of variations for search help, insert that number of cell variants in table column
2. Enter the value of variant key property of each cell variant for ex. 01 for first cell variant and 02 for second cell variant
3. Insert cell editor for each of cell variant. for ex. if you have 2 different search helps for single column then insert two cell variant in table column and for each cell variant insert cell editor, let say input field in this case
4. Bind the value property of each input field to different context attribute of the node. for ex: you have table with two columns i.e. Dynamic and fldate
. First column is Dynamic. It will have two cell variants and each cell variant have cell editor of type input field i.e. depending upon the value of second column i.e. fldate, the search help of first column will be decided.
5. Create context node from structure "SFLIGHT" and select 3 components from structure i.e. Carrid, connid, fldate. Add another context attribute to same context node i.e. selected_cell_variant of type string
6. Bind each of context attribute carrid and coonid to value property of cell editor i.e. input field of cell vairaints from column Dynamic
7. Bind value property of cell editor i.e. input field of fldate column to context attribute fldate
8.. Bind selectedCellVariant property of table column Dynamic to context attribute selected_cell_variant
9. Now, Write method at the wddoinit of view to fill up the context node from table sflight table
10. Write event handler for event OnEnter of cell editor from table column FLDATE. in this event handler depnding upon the date set the value of context attribute "selected_cell_variant" to 01 or 02
DATA lv_date TYPE S_DATE.
ASSERT CONDITION context_element IS NOT INITIAL. " context_element is default paramter for event handler
context_element->get_attribute(
    EXPORTING
      name = 'FLDATE'    " NAME
    IMPORTING
      value = lv_date    " DATA
IF lv_date > '20101016'.
    context_element->set_attribute(
      EXPORTING
        value = '01'   " Attribute Value
        name = 'SELECTED_CELL_VARIANT'     " Web Dynpro: Name of Context Element
ELSE.
    context_element->set_attribute(
      EXPORTING
        value = '02'   " Attribute Value
        name = 'SELECTED_CELL_VARIANT'     " Web Dynpro: Name of Context Element
ENDIF.
11. Depending upon the value of selectedCellVariant the corresponding search help will show up in table column. So change the value of column fldate for each table row and see how search help gets changed.
Thanks,
Rahul
Edited by: Rahul Yadav on Oct 17, 2010 12:09 AM

Changing the search help for vbap-aufnr in va01

Hi Folks,
Can we change the search help provided for the field Order(vbap-aufnr) in the table Control ALL ITEMS in VA01.
1.go to va01.
2.give the order type.
3.press enter.
4.it will take us to the overview screen.
5.there we will find a table control named ALL ITEMS.
6.in that we can find a field called ORDER(vbap-aufnr) with a Search Help provided.
7.I want to change this search help to the search help provided for the same field in other screen.
(the same field is in some other screen which is having a different kind of search help,I want to provide that search help for the above said screen too)
Let me know how to go with this in detail.
Thanks,
K.Kiran.

Hi Folks,
The same requirement I am trying to explain in a detailed manner.
1.go to va01.
2.give the order type.
3.press enter.
4.it will take us to the overview screen.
5.there we will find a table control named ALL ITEMS.
6.in that we can find a field called ORDER(vbap-aufnr) with a Search Help provided showing only the Orders.
7.Now double click in the same field which is taking us to Item Data Screen.
8.here we will be able to see a few tab strips.
9.click on the accounts assignment tab.
10.we will be able to find the filed ORDER having a Search Help.
Now I want this search help at the screen I had discussed above.At both the areas search help is provided using 'DD_SHLP_CALL_FROM_DYNP'.
How to solve this?
K.Kiran.

Change search help for field 'customer' in Trade Promotion

Hello everyone,
I would like to change the search help for the customer field (CRM_MKTPL_TRADE-CUSTOMER_ID search help: CRM_MKTPL_CAMPAIGN_CUST_ID) to one of my own.
How can I do this?
I would also like to change the search help for each partner function in the partner-tab. Is this the same procedure as above?
Regards,
Friederike

Hi Friederike,
If I have understood your question correctly then here is the answer.
You can change the search help for the required filed. All you have to do is: Go to the table CRM_MKTPL_TRADE. Then look for the field CUSTOMER_ID. Change only the description of the field. then you can search by the description whenever you require.
But the procedure will not be same if you want to change the search help for partner functions. In this case you have to change the descriptionof these partner functions in the transaction BP.
But why do you require it, because the partner functions will be determined automatically.
Hope it helps.
Regards,
Ankur

Change Search help for Location in Schedule creation screen(NWBC)

Hi all,
My requirement is to change the standard search help for Location field in Standard stop sequence of Schedule creation in NWBC.
Presently, the search help for the location field is a webdynpro component WDR_F4_ELEMENTARY .Is there any possibility to replace with the custom search help.
Can anybody please let me know how to replace the search help.
Thanks&Regards,
Sharmista.

Hi
I suppose you may create a component customizing for /SCMTMS/WDCC_SCH_C_LOC_ATS, and maintain your DDIC search help for location ID, this will replace the one assigned in structure:
You may only maintain DDIC search help here, but if you have a custom developed search help, then you may need to go with another approach, in viewexit class (/SCMTMS/CL_UI_VIEWEXIT_SCH) adapt_fields (ADAPT_FIELDS), modify the attribute 'WD_VALUE_HELP' = custom search help.
Hope it helps

Please, can I with help of Javascript change spot color values? for example by my color VARNISH with c:0,m:10,y:15,k:0 to make change to c:0,m:0,y:0,k:0? thank you

Please, can I with help of Javascript change specific spot color values? for example, I have color named VARNISH with values c:0,m:10,y:15,k:0 and it would help me to make change to c:0,m:0,y:0,k:0 as a part of an action. Is it possible? Thank you

Hi Kon Verter,
you can change the values of your spot swatch, but you have to check many things before.
e.g. you can do something like this:
var Vcolor = app.activeDocument.swatches.getByName("Varnish");
if (Vcolor.color.spot.colorType == ColorModel.SPOT && Vcolor.color.spot.spotKind == SpotColorKind.SPOTCMYK) {
    alert("Black value before: "+Vcolor.color.spot.color.black);
    Vcolor.color.spot.color.black= 0; // and so on
    alert("Black value after: "+Vcolor.color.spot.color.black);
This will change the black value of the cmyk spot color with name Varnish to 0
Have fun

Can anyone help me with changing email address for resetting password notification

Can anyone help me with changing email address for resetting password notification?

If you know the answers to your security questions, you can change your rescue email address as shown in step 6 in this article: http://support.apple.com/kb/HT5312.
If you don't kow the answers to your security questions or need other assistance doing this, either contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or contact the Apple account security team: http://support.apple.com/kb/HT5699.

Need help : for changing the flv movie size

i am loading my flv thogh xml link if load my flv the same
size what i kept in my folder using script shall i change the movie
size because lot of movies is loads dynmicaly i cannot go and
change each and evry movie
so some body can help me to change the movie - flv while it
loads.

You should be able to change the product name in Google Cloud. The ChromeBook uses Google Cloud to print (Google Cloud uses HP ePrint). Log into your google account and change the printer name there.
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

Help for a change in ownership

Similar Messages

Maybe you are looking for