HELP! - How do I append swf files together?

I currently have a swf slideshow (EHS.swf) and would like to
append another as a continuation (EHS1.swf). My problem is -
EHS1.swf appends but plays very fast. My current fps for both files
are 20fps. I would like to append more, but I can't seem to find
the right way of appending the first.
I tried creating the slideshow as one file, but when i
reached 16000th frame, the tween would not work anymore. So I had
to find a way to put them together. I am not sure if loadMovie is
the best way of doing it.
Any suggestions or help is greatly appreciated. I am so new
to this that I don't know what I'm doing.

Jeckyl and K, I apologize for the multiple posts with the
same problems, im desperate (no excuse, just new on this stuff).
I tried your solutions, but failed. the second movie clip
plays very fast around 3 seconds when it should be more than 40
seconds. i have to be doing something wrong.
here's what im trying to accomplish:
first layer - background music
second layer - loaded first clip (1-15000 frame)
> loadMovie("movie1.swf",1)
second layer - loaded second clip on the 15001th frame
> loadMovieNum("movie2.swf",1)
what am i doing wrong? could you figure this out for
me?

Similar Messages

How to embed multiple SWF files into TinyMCE editor

Hello,
I am looking for help with Captivate 3. I have a demonstration recording that gives me two swf files, one for the actuall recording, another for the skin. The company I work for uses Helpstream for knowledge base content. The articles I enter need to sometimes have videos embeded. They use a tiny mce editor, and I'm not sure how to embed the two files together. After publishing the recording, I tried to take the object code from the html file, and use that, but that did not work.
Any suggestions on how I can do this? Is there some setting that I need to have before publshing that will combine the skin and recording into one flash file? Currently I use Camtasia, but I would like to create more advanced video content and start using CAptivate full time.
Thanks!
Marianne F

Hi there
Clicking Project > Skin > Borders tab and DE-selecting the Show Borders option will eliminate the skin.SWF from being created.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to create the SWF file which was included surrogate pairs.

I would like to make sure how to create the SWF file which are included surrogate pairs.
The error of outside the scope of unicode occurred when I compiled(mxmlc) the as file which was set surrogate pairs to 'Unicoderange'.
Ex, I set the ' '(UTF-16 is '20B9F') to 'Unicoderange'.
However, I cannot add the surrogate pairs.
The error of outside the scope of Unicode occurred when I compiled the AS file.
The reason of error was that the Unicode(UTF-16) of surrogate pairs is invalid.
Then, I read the following pages.
These pages are written that unicode-range supported surrogate pairs.
http://livedocs.adobe.com/flex/3/html/help.html?content=fonts_07.html
http://www.w3.org/TR/1998/REC-CSS2-19980512/fonts.html#descdef-unicode -range
So please let me know how to create the SWF file which are included surrogate pairs.
Environment
- Flex3.5a
- TTC: meiryo(ver6.02), msgothic(ver2.50), mspgothic(ver2.50)
Thanks,
Takeshi Ishihara.

I've been able to create project jar files in Eclipse by selecting Export from the File menu, then choose Java - Jar file - and provide the required information, name, destination folder etc. But when I do this, I do not export other jars on the build path this way nor do I expect to do this. I am only concerned with creating a jar file of my own work. A jar file does not "contain" other jar files. If the jar file contains the main method, and requires other jars for it's execution, then you may wish to include a reference to required jars on the class path entry of the Manifest file of the jar file you create. I'm not sure how to create a Manifest file in eclipse though..

How do I fuse audio files together?

Hey, I'm finishing up the editing for my full-length horror feature, and currently I'm putting in the sound effects and I was trying to figure out how can I fuse audio files together?
Here's the thing, my video files are files I converted into AVIs from VOBs, only problem is that the audio disappeared from them, but my friend tried to load all my VOBs into AVIs for me since I did something wrong but when he converted them the video was gone but the audio was there...so I figured I'd just take the audio and put it in place.
Right now I have to put in a sound effect of the guy screaming while gory sounds are playing in the background, then after that I have a chainsaw scene where a woman screams, a chainsaw blases, a mechanical laughter is heard, and gory sounds are playing all together.
If you could help me figure out how to get the files to fuse together to play the sounds all together, knowing I have to change the volume for each one, that would be very much appreciated. Thanks!
-Toby

Ah, those scroll bars. They don't stand out, as much, as I would like. I always overlook the ones in the Share Panel, though I have used them many times.
Unfortunately, PrE has chosen an arrangement, where Audio & Video Tracks are grouped. I like the PrPro layout, where all Video Tracks are above a "centerline" and all Audio Tracks are below that.
About the closest that one can come in PrE is to use Delete Unused Tracks, to remove empty Video Tracks, or to View Video Tracks (alone), or View Audio Tracks (alone). With a combo of those, one can customize the Timeline a bit.
When cleaned up, one can then Add Tracks, for any additional Audio Tracks necessary.
If one did ONLY the View Audio, they loose the ability to refer to the Video Track, and with SFX, that is necessary, at least for me.
I like to keep each type of Audio on its own Track. That makes actions, like applying Track Keyframes, or adjustments to JUST that Clip, or Clip type. If I have SFX, music, camera Audio, and other Audio sources, I will put many SFX on their own Audio Track, the camera Audio on another, and then the music one one, or more additional Audio Tracks. Not too long ago, I had one Project with about 10 separate SFX Audio Tracks, one for a "loon," one for "crickets," three for "frogs," one for "pond ambiance," and then two for music (as I was doing faux DD 5.1 SS in PrPro), with one from Music F (front) and Music R (rear).
Good luck, and happy editing,
Hunt

How to Preloading a swf file in one application

hello friends,
How to preload a swf file in one application??
i have two panel in one panel i given login screen and In second panel there is one module i have to show this panel which is visible="false" when user logged in but i have to preload this module in second panel when the user is doing logi. and when user logged in that time i have to show the second panel hiding the first panel.
so how to do this i m not getting can anyone help me??
Thanking you,
Gajanan

i have created a jar file.Now i want to reuse this
jar file in another java program.Could anyone please
guide me with the steps of how to reuse a jar fileput your jar file in class path and import the class which u want to reuse in your code so that u can access all the methods in that class in ur code.

How can I convert .swf file to exe file?

thanks

Hi
Thank for your choise.
If showing only white screen, please download the lastest version, v2.03.
http://www.bullrushsoft.com/download.html
This problem occurs in Win7 sp1, especially IE has been upgraded to v10.
Our SWF to EXE Converter must need the FlashPlayer plugin for IE, it 's not a atandalone program.
So it only 880KB.
Our online converter is the adobe flash player exe, it can be embed the swf into, and standalone, so its size > 4MB.
More details, please visit http://www.bullrushsoft.com/online.html
Best Regards.
2013-08-11
Bullrushsoft Support Team
From: mmshahid73
Date: 2013-08-11 02:52:01
To: Sandro_brs
Cc:
Subject: _How_can_I_convert_.swf fileto_exe_file?
Re: How can I convert .swf file to exe file?
created by mmshahid73 in Flash Ad Development - View the full discussion
Hi, I used bullrushsoft SWF to EXE converter, but the created EXE file showing only white screen, i think i need to add flash player also but i don't know how to add flash player duriing swf to exe conversion.
Because when i converted swf into exe from my pc, it showing size 880 KB where swf file size is 413 KB, onthe other hand, I convert the same online which is playing correctly but the converted file size is 4.57 MB.
Am i right?
Kindly help
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5583680#5583680
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5583680#5583680
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5583680#5583680. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Ad Development by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Will someone help me open a cisco swf file

I am trying to open a cisco swf file on my xp computer.I initially downloaded "IrFanView" which was a program internet explorer told me to download so I could open it. I downloaded the aforementioned program and when I try to open the file I get on the bottom of screen "unidentified error" then a popup box that sais "Internet Explorer can't open this file". Then I try to open it with Google Chrome and I don't get the popup but still the "unidentified error" at the bottom of the screen. I have heard that adobe flash will open it but here is the tricky part. In my add/remove programs it shows I have adobe flash 11 active x. However, when I right click on the file and click on "open with" the only adobe product that shows is Adobe Reader.I'm thinking if I could get the path to adobe flash then I might have the answer. Is my thinking along the right path or not. Lastly, can someone help me find the path to adobe flash 11 or help me to open this swf file.

Ned,
I tried opening it via Internet Explorer and got this error message:
Invalid character
index.js       Line: 1
Invalid Character
swfobject.js Line:1
Object expected
index.html    Line:18
'SWFObject' is undefined
index.html
code:0
URI: file:///C:CISCO_CCNA/Exploration1_English/theme/index.html      Line: 51
                                                                                                      Char:1
What does all of that above mean?

How can I associat ".swf" files with flashlite 2.1

How can I associate ".swf" files with flashlite 2.1? When I
install flash lite 2.0,it can do ---- click .swf files system can
autoly use flashlite to play.But now I install flashlite 2.1,it
lost this ability return as "unknow files formate".
Now,how can I reassociate ".swf" with flashlite 2.1?
first: I must use flashlite 2.1.
second:I must click .swf file directly.
I know another way to open :open the player and then find the
.swf,and open it. But ,unfortunately,I can not use this way to
open.Now I will be looking for another way.

unfortunately, the 2.1 developer edition you have installed
has not overwritten the original version integrated into the
symbian OS by the manufacturer. This means that the only way to
open the 2.1 files is to open the 2.1 player from your apps menuu,
and click on the swf file. You will only get direct access if the
updated player is in a firmware update for you handset.
Matt
http://www.outside-media.co.uk/blog

When do you think a preloader is necessary? How large should a swf file be to justify it?

I'm looking for opinions on preloaders. When do you use a preloader? How large must a swf file be before you to put a preloader in it? I am working on a small program that is 80kb in size right now and I'm not sure if I should add a preloader.

About 500kb, you should use a preloader.
Below? It depends on your file. If everything is on frame 1 , maybe it's better to use one.
You can test it with "Simulate Download" (Control - Test Scene -> View - Simulate Download)

Need help with combining swf files together

Hi Everyone
I have problem with my project.
I created several SWF files, now i want them to interact with each other
So there is main SWF file lets call it:
main.swf
then within that file(main.swf) i would like to create buttons which will be calling other swf files for instance by pressing one button one.swf will be open by pressing other button two.swf will be open and so on.
Then I would like to create buttons within one.swf and two.swf which will allowed to go back to main.swf
If someone could help me how to do it I will be grateful.
AS2.0 i am working with
many thanks

thanks for quick respond
So the first of all my main.swf would load, within it i would have a button. If i click on button will take me to frame 40 ( just example ) where i will have this.loadMovie("first.swf"), when this file will be loaded i want to have other button with in the first.swf which will take me back to main.swf and now you are suggesting to use this.removeMovie("first.swf")?
I am not sure if i got you answer right
Thanks again for help i am quite new to ActionScript as you can tell.

How to call a .swf file in another .swf file?

Hi all,
I am new to flash and ActionScript3.0. Presently, I am using
flash CS3 and the code I need is in ActionScript 3.0.
Suppose, I have a .swf file(viz., file1.swf). Now, i am
developing one more .swf file(viz., file2.swf), in which I need
to execute file1.swf when a CLICK event is listened on button
present in second file(i.e., file2.swf).
In how many ways, we can get this.
And, please I need code very urgently.
Help me.

You use the Loader class to load external content like swf's
or images. If
you click the main entry for Loader Class in the AS3 help,
there's an
example of loading an external swf.
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

HELP DREAMWEAVER CS4 NOT SHOWING SWF FILES

I have a presentation in 2 days in Tokyo. And I'm panicking.
I'm on am Intel Mac OS X 10.4.11.
I have the latest version of Flash Player 10 installed. (Not the brand new beta version).
I created a great website in Dreamweaver MX a few years ago.
I never had ANY issues with .swf files displaying until using Dreamweaver CS4.
I updated my photography portfolios in Adobe Bridge, and used Dreamweaver CS4 to link the updates.
NOTHING MORE THAN THAT!
Then, NONE of the .swf files that were always viewable are showing.
There is absolutely NO Flash content showing on any page of the site now.
Not even in browser view in Safari, or Firefox.
I uploaded the files along with the newly created SCRIPTS folder to my server, and still no .swf files are viewable.
These are NOT FLV files they are .swf files that were imbedded properly, and were always viewable. Until now.
I have to go to Tokyo in two days and give a presentation of this site.
What is the problem?
The attached files show the view in Dreamweaver CS4. The view in Safari, and the view in Firefox.
I'm screwed for a desperately needed job in Tokyo if I can't get this fixed ASAP.
Please help.

i think you are on to something here. but i am not sure how to go about fixing this.
are you saying the "../s
should be replaced with "S
where is this code located? in the source code of each page that has the swf files? i should replace it with the correct version you copy and pasted? and that should resolve the problem?
big thanks if this is the issue.
<script src="../scripts/AC_RunActiveContent.js" type="text/javascript"></script>
The correct link to that file would be this -
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
Note the "S" in place of the "s". *nix servers are case sensitive.

Append swf file - Spry.Utils.updateContent - not work

I don't understand this
When I try to add swf file to Spry Tabbed Panels content -
everything is OK. Now - in tabbed panels content I want to insert
data from external html files. In this external file I have swf
file and text, and images. When I preview this html external file
in browser - all data are displayed correctly. When I try append
this file into tabbed panels content :
<a href="#" onclick="Spry.Utils.updateContent('apDiv1',
'products/products1.htm'); return false;">Append file</a>
only swf file in a new window are display.
If I delete swf content from external html file - everything
is ok. But if in external append file is a swf content - IE display
only swf file.
Is there posible to append html file with swf file in this
method in any way?

Hi Elaine,
The implementation of AC_FL_RunContent() suggests that it was
only meant to be run *BEFORE* the page finishes loading. Because
Spry data sets and regions load and redraw asynchronously, usually
*after* the page finishes loading, they are not compatible. As
we've mentioned above, if Spry triggers the call to
AC_FL_RunContent(), it will most likely be *after* the onload event
has fired, and since AC_FL_RunContent() uses document.write() it
will result in the entire page being overwritten by the
<object>/<embed> tag that it writes out.
That all said, libraries like SWFObject were designed to be
called even after the onload event fires, at least from what I can
tell from their samples. If you need to extract data from a data
set to create your SWFObject, you can simply attach an observer to
your data set that will tell the swfobject to do what it is you
want it to do. For example:
<script type="text/javascript">
var dsProducts = new Spry.Data.XMLDataSet("products.xml",
"/products/product");
// Register an observer on dsProducts so that any time it
changes data or the current
// row changes, it tells the swfobject what to do:
dsProducts.addObserver(function(notificationType, notifier,
data)
if (notificationType != "onDataChanged" || notificationType
!= "onCurrentRowChanged")
return;
// Do something with the swfobject here:
var curRow = dsProducts.getCurrentRow();
// The following embedSWF call is only an example of how to
get the "productURL" column
// value for the current row and pass it to the swfobject.
The rest of the args, are left as names to
// show you what you should be passing.
swfobject.embedSWF(curRow.productURL, replaceElemIdStr,
widthStr, heightStr, swfVersionStr, xiSwfUrlStr, flashvarsObj,
parObj, attObj);
</script>
--== Kin ==--

How can we compress SWF files and optimize tool?

I need to reduce SWF file size up to 70%, quality will not be sink.
Is this possible in adobe software? please help...

Iam working on banner production, is their any better software/tools for SWF optimization/compression?
I got one SWF and FLA from other creative team, SWF size is below 50 KB look's better quality, I have changed some small amends, when i was exporting it from FLA... the SWF file weight goes to 90KB, i compressed image quality then, expoted again... the file size goes to 70KB. how can i do 50KB in better quality.
Thank you for your help!

How to load large SWF files?

I have created a flash game which is about 11 MB in size and i have created the progBar in the first frame of the swf...
But it only shows the loading process after few MBs of data beign loaded...which might take some time and cause the user to close the tab..
I dont want this to happen...How i could tell the user at least that the swf is loading without any percentage and all the animations..
Like putting a <div> tag at the back of swf file..so until the swf load the div tag with "loading" message can be shown...I tried this method but it wasnt working for me and i dont know why.
I hope flash masters at this forum could help me.
Tq

gameLoader.source="MapleCity0.1.13.12_800.swf";
gameLoader.load();
gameLoader.addEventListener(ProgressEvent.PROGRESS, progressHandler);
gameLoader.addEventListener(Event.COMPLETE, completeHandler);
gameLoader.addEventListener(IOErrorEvent.IO_ERROR, catchScoreIOError);
function progressHandler(event:ProgressEvent):void {
    var uiLdr:UILoader=event.currentTarget as UILoader;
    var kbLoaded:String=Number(uiLdr.bytesLoaded/1048576).toFixed(1);
    var kbTotal:String=Number(uiLdr.bytesTotal/1048576).toFixed(1);
    ui.myLabel.text=kbLoaded+" of "+kbTotal+" MB"+" ("+Math.round(uiLdr.percentLoaded)+"%)";
    ui.myProgressBar.setProgress(event.bytesLoaded, event.bytesTotal);
function completeHandler(event:Event):void {
    ui.visible=false;
    gameLoader.removeEventListener(ProgressEvent.PROGRESS, progressHandler);
    gameLoader.removeEventListener(Event.COMPLETE, completeHandler);
function catchScoreIOError(event:IOErrorEvent) {
    if (event.type=="ioError") {
        ui.myLabel.text="Cannot establish a connection to the server. Please try again later.";
    } else {
        ui.myLabel.text="ERROR : "+event.type;

HELP! - How do I append swf files together?

Similar Messages

Maybe you are looking for