HELP. How do i stop a video looping in a button?

Please can anyone help me, i'm losing my mind trying to solve this seemingly very simple problem. I have a very low quality video that i don't want to play in full screen mode. So i have created a track with a button where i have dropped the movie. Everything is fine as it plays in this little button i've created - BUT it will only play for about 15 seconds before it loops back to the start again. How do i stop this loop and play the whole film clip?

start loop end in the inspector

Similar Messages

How do I stop mail from looping the same emails into inbox?

How do I stop mail from looping the same emails into the inbox over and over again? It does the same thing with deleted messages that keep showing up again and again in multiples even after deleting them. I have made sure my server settings in all email accounts are set to delete immediately once I delete them on my MacBook Pro/IPhone. This issue has severely compromised the efficiency of Mail on my MacBook. Thanks for any help you're able to give me.

I have tried that but it does not fix the problem.
The "card" group is not a previous recipient.
Although not available for editing in Contacts, it is a valid group showing up in the "To" field of Messages, Mail, or any app using the AddressBook.
Its associated file is automatically created in:
~/Library/ApplicationSupport/AddressBook/Sources/<hexaFolder>/MetaData/<hexa>ABG roup.abcdg
This is why it also shows up in the Spotlight results...
If I manually remove this file, it gets recreated...
If I turn off the syncing through iCloud, the entry gets deleted. If I turn it up, it comes back!

How do I stop an infinite loop because of a poorly placed user prompt during development without closing LabView?

How do I stop an infinite loop because of a poorly placed user prompt during development without closing LabView?
Thank you!
Solved!
Go to Solution.

chuck72352 wrote:
Here is an example of a VI that I can't stop.
Epic Fail
but seriously, as was suggested, download Darren's Abort.vi. It comes in very handy for these.
Message Edited by Broken Arrow on 05-03-2010 01:06 PM
Richard

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom

How do you stop a video from playing after you use removechild?

I am new to flash and asc3. I am currently developing a website using cs3. I have the main swf that calls in other swfs using the add child. The swfs that I am calling in, have video using the standard flvplayer. The problem that I am encountering (and is driving me nuts) is when I use the remove child, you can still hear the audio from the video that was just removed. How to I stop it? Please help. If you need more details, let me know. I really need to fix this asap. Thanks.

Try adding this to your code:
SoundMixer.stopAll();

How do i stop a while loop

I'm new to labview and I'm having a problem stopping a while loop (running windows XP/2000 with the student edition of labview express 7).
I'm doing a data acquisition program where I'm constantly reading in voltage and comparing it to a set point value, when the input voltage goes above the set point, i want the while loop to stop. How do I do this? I already have an LED going on when the criteria is met, but I'm not sure how to actually stop the loop (i.e. change the iteration value from true to false-i guess). If anyone can please assist me with this I would very much appreciate it.
I've included my program too.
Attachments:
CO_Detection_Monitoring_System_Modified.vi ‏60 KB

Hello Everyone-
I've just posted a message about stopping a while loop and it was answered accurately and quickly- thanks to LV_Pro and PauloM- thanks much- its nice too see that there are many helpful people out there! Unfortunately, I have 2 more questions to ask of the forum.
My application is almost completed- I just need to add an elapsed time counter that will tell me how long it took for my LED to trigger (from my set point-i.e. when from 0:00:00 until when my loop stopped).
Now I've found a perfect elapsed time counter on the NI web site contributed from Mike Hall from Ohmeda Medical- the page is here.... http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=D37E2493DC333076E034080020E74861&p_node=DZ52032&p_source=external
So my first question is, it looks like I can just extend the while loop box in my 'CO detector... .vi' and paste just the code from the 'elapsed time.vi' while loop into my loop and I will be set- but do I need to change my wait until next multiple to be a 1000 too in my program? Probably, but I'm not sure hence the question- or other ideas would appreciated.
My second question is now that my application is complete (after I add the elapsed time above), I need to exactly duplicate this process for 7 other DAQ inputs (i.e. right now I'm using only 1 of 8 analog inputs on the FP-AI110). So should I make my 'CO detector.. .vi' a separate program (I remember reading something about this in one of the posts earlier).
Any help is very appreciated.
Thank you again,
Daniel
Attachments:
CO_Detection_Monitoring_System_Modified.vi ‏60 KB

How do I make a video loop in FCP?

Hello good folks,
I've been using FCP for a few years, but none of my clients requested a video loop ever before, therefore, I don't know how to do it. In the project I'm actually working on, my client wants me to activate that function in the final product; do you guys have any suggestion in this matter?
Thank you very much in advance

Actually, there is as issue that needs to be explored here. Does your sequence begin and end in black? If so, CaptM's method will work just fine. You may see a short hiccup at the loop point as most dvd players will hold a still frame that is probably just a field momentarily, but it probably won't be that noticeable. If you want to loop a video seamlessly, you should repeat the clip in the track as often as possible to fit on a dvd. And then setup the end jump for the track to go back to the beginning of the same clip. This loop point may be noticeable but all the others will be seamless.

How do I make a video loop in DVD Studio Pro?

Hello good folks,
I've been using DVD Studio Pro for a few years, but none of my clients requested a video loop ever before, therefore, I don't know how to do it. In the project I'm actually working on, my client wants me to activate that function in the final product; do you guys have any suggestion in this matter?
Thank you very much in advance

Have a look at this article (see steps 9-10)
http://docs.info.apple.com/article.html?artnum=93812
Good luck!

HT4589 How do I stop my video from randomly flashing green?

In the middle of editing my video the screen started to flash green in one spot and then started doing it in other places. It still does it after I export. How do I stop this?

You need to re-render the affected clips. Have a quick flick through this forum and you will find a couple of posts reffering to this.
Tony

Help how do i stop iTunes from automatically opening when I press the right directional arrow

I am have an early 2011 Macbook Pro i5 with OSX 10.9 running itunes 11.1.3
Everytime I press the directional right arrow it open itunes and plays a song. It seems like an odd problem. How do I stop this?
I tried searching for a solution and can't find anything.
Any help would be appreciated.

I am not entirely sure what you are describing.
Where are the 'Bookmark folders ' that give you a problem
* within some sort of document or file
*on firefox
** on the bookmarks toolbar
**on the sidebar
**in the firefox bookmarks library
* on a drop down menu from the location bar
* somewhere else
try to answer the above questions and give more detail, someone will probably try to help.

How do you STOP a video (and sound)?

My code for starting the video is simple enough:
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
ns.play("VideosDone/extras2.flv")
~~~~~~~~~~~~~~~
Nothing I do will STOP this video, though. If I delete the
player from the stage the sound just keeps going. Help,
please?

thanks kglad, but it doesn't seem to be working. ns.close
just kind of pauses my video until it would otherwise have ended
normally, and then it restarts from the beginning on its
own?

How do I stop a video playing in the background?

I'm using videos in a DPS publication for iPad, but when I turn away from the page while the video plays, it continues to play in the background. That's not a thing I want. How do I stop that from happening so that the video pauses or stops when I flip pages?

In other blogs some mentioned a little tool that stops the video when u go to other pages but it doesn't on Android as the mentioned here

Help How do I stop these emails??????

HELP!!!!!!! How do I stop these emails??????

Which emails ?
You mean notiification from Apple Support Community ?
see here https://discussions.apple.com/message/20638466#20638466

Help - how do I stop Itunes from auto update

I have just deleted everything from my Itunes. How do I stop Ipod from being updated by Itunes automatically (it's now blank except for 2 new songs I just bought. My Ipod has over 1000 songs on it and I don't want it all to be erased by updating it to a blank Itunes library!!
Thanks

How to keep iTunes from automatically updating your iPod
Another Easier Alternative:
While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
You can then right-click on the iPod icon in iTunes source column and select iPod Options, then check the box that says Manually manage songs and playlists. You can now manage your library without losing any songs on the iPod.
If connecting to a
i different computer
than the iPods Home Computer, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the Home computer iTunes will auto-sync without warning!. Best to know the difference.
Then: Transfer music manually

Stop dependant while loops with 1 button

Hi,
I am developing a utility that allows a user to configure up to 2 devices (both use same driver with a different board number), click initialize, which then brings up a file dialog and displays arrays for the data to be collected and some error messages for each measurement. The user then clicks the Start/Stop button to begin collecting and logging data. Currently i have a Wait(ms) block to allow the user to set often the measurement should be made. Currently the Start/Stop button allows collection to be started, paused, and started again. My problem is trying to have a master stop button that should stop all loops immediately when it is pressed.
I tried using a global variable for the stop button, but the measurement and logging while loop doesnt stop until after the wait(ms) block times out. Can anyone give suggestions. If i need to restructure the VI into different loops, I can do that. I just want to understand the right way to program something like this.
The VIs are attached. I removed the device specific measurement VI so that anyone can open the vis and run them to see how it works.
Attachments:
2Devices_withoutMeasurementVI.vi ‏112 KB
BuildOutput.vi ‏27 KB
stopGlobal.vi ‏5 KB

Ok. I had a chance to take a look at your code and I think you don't quite understand the concept of "dataflow". Let me see if I can help.
First of all...when I refer to your upper structure, I am referring to the first while loop, sequence structure, and subsequent while loops. When I refer to your lower structure, I am referring to the while loop containing the event structure. Just so we get our terminology straight.
I believe that you are under the illusion that your upper structure contains three parallel while loops. It does not. It contains three SERIAL while loops. There is dataflow dependency between the while loops. The sequence structure requires data that is not available until the first while loop has finished executing, so the sequence structure cannot start executing until the first while loop has terminated.
The second while loop requires inputs from the first frame of the sequence structure (which, by the way, you don't need and should get rid of...the sequence structure, I mean), so it cannot start executing until the first frame of the sequence structure has terminated. The third while loop requires inputs from the second while loop...so, again, the third while loop cannot run until the second while loop has finished executing.
Now, for your stop button. You have that global stopping all three loops. So here's what is happening in your program:
Your program starts. The first while loop executes in parallel with the loop which contains the event structure.
At some point you press the "stop" button. Both the first while loop and the loop containing the event structure finish executing.
The first frame of your sequence structure executes.
The second frame of your sequence structure executes. The second while loop reads the "stop" value from the global, so it executes once and then finishes.
The third while loop starts executing. Again, the loop reads the "stop" value from the global, so it executes once and then finishes.
Then your program terminates.
You need to restructure your program, because right now it doesn't make any sense at all. Your block diagram would benefit from some serious tidying up as well, your wiring is a mess. I suggest you look into a state machine architecture for this program.

HELP. How do i stop a video looping in a button?

Similar Messages

Maybe you are looking for