Help, my tab order will not work? Tried to troubleshoot, no luck!
I created a form used the manual tab order and it would not work. I adjusted the hierarchy and erased all the traversal's in the XML. The tabbing order is now automatic but still out of order pretty badly. Can someone please guide me in the right direction. I really want this form to be over with.
Hope you considered following point.....When you set the Tab order you set the order starting 1 to n with in each subform. Setting taborder across the subforms is not an option at least in LC 7 and 8. However there is workaround for this, using setFocus() method.... look more in the help.
Example: xfa.host.setFocus("xfa.form.form1.TextField1");
If you still have difficulty attach a copy of your template and explain in detail what you try to do.
Similar Messages
-
My ipad will not workit trying to back up from icloud and wil not let into settings
help my ipad will not work keeps trying to up date icloud and will not let me log in
I think I understand what you mean so try this and see if it lets you get back into your settings.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Folder Actions will not work - tried everything
Recently Folder Actions simply stopped working on 10.6.4. They worked fine before then recently just stopped working.
I've tried everything I can think of, including:
1. completely removing enabling & disabling & enabling folder actions through the setup app.
2. trashing folder actions plist files in user domain and relaunching
3. disabling related launchd processes with lingon
4. trashing launch agents in user domain and also trying to unload them in terminal
5. trying to kill the folder actions dispatcher process in activity monitor (just relaunches, as it should)
6. emptying system caches including dyld shared cache using cocktail
7. doing most of the above and restarting
It's driving me nuts. Any other ideas?
here's some entries from syslog:
8/2/10 9:31:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 6 seconds
8/2/10 9:37:29 AM Folder Actions Setup[4403] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 9:43:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.enabled[309]) Exited: Killed
8/2/10 9:46:23 AM [0x0-0x3a03a].com.apple.systemevents[360] com.apple.FolderActions.enabled: Already loaded
8/2/10 9:52:07 AM Folder Actions Setup[1083] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 9:52:16 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 7 seconds
8/2/10 9:53:02 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 seconds
8/2/10 9:56:18 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
8/2/10 10:00:58 AM Folder Actions Setup[2190] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 10:01:01 AM com.apple.FolderActions.enabled[2236] launchctl: Error unloading: com.apple.FolderActions.folders
8/2/10 10:01:30 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
8/2/10 10:01:42 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 9 seconds
8/2/10 10:05:03 AM sudo[2622] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
8/2/10 10:10:25 AM Folder Actions Setup[676] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] launchctl: Couldn't stat("/Users/lryter/Library/LaunchAgents/com.apple.FolderActions.folders.plist"): No such file or directory
8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] nothing found to unload
8/2/10 10:10:38 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 8 seconds
8/2/10 10:13:17 AM sudo[943] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
8/2/10 10:14:01 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 4 seconds
8/2/10 10:14:14 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 secondsI finally go Folders Action to work, after being unable to use it even for a simple beep for years now.
Here is what I did:
1. Changed permissions to 755 for the following folder and two contained files (note that 775 didn't work for me)
~/Library/LaunchAgents/
~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
~/Library/LaunchAgents/com.apple.FolderActions.folders.plist
2. Changed the following lines within ~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist (using TextWrangler)
from:
<key>OnDemand</key>
<false/>
to:
<key>OnDemand</key>
<true/>
Prior to the permissions changes within #1 above, the value of <true/> kept getting changed back to <false/> by something in the system... and though
there was improvement by the permissions changes, the following console message appeared until false was changed to true.
com.apple.FolderActions.enabled[4127] launchctl: Error unloading: com.apple.FolderActions.folders
At this point true is staying true, and not being changed by unknown forces to false, and the above message is not appearing.
3. The only other thing I did prior to #1 and #2 above, was to run the script (unsaved),
tell application "/System/Library/CoreServices/Folder Actions Dispatcher.app" to tick
This little tell line caused something to occur where my Folder Action surprised me and worked for the first time though it took about 30 seconds and was erratic,
sometimes performing, sometimes not, though if I would do move something into the folder to trigger the action that should occur, and did not occur, then at the point
running the above tell line or script would cause the action to occur.
4. At this point I don't fool with the tell line or script from #3, and it seems that systemevents has gotten involved, as well as launchd, and with my simple Folder Action script
I'm getting the folder action within 10 seconds compared to 30 to 45 if ever seconds.
5. This is still too early to tell if this is the wonder pill I've needed since Leopard, and now Snow Leopard (and maybe Tiger as well: I forget when I even tried Folder Actions).
There was a time when I moved things around, so that the items normally found in the former AppleScript folder, were placed elsewhere in subfolders, so I don't know if that lead to this...
because I could get Folder Actions to work on Macs in the Applestore, but not my own Mac. Watching the console messages was helpful. I don't think it's a big concern that
deprecated messages are found sometimes. That's a just a normal part of the constantly rebuilding of things that goes on. It's more like a reminder that we've got an upgraded
OEM part were going to start using, and the older part won't be available after such and such date, so program accordingly, and in the meantime drive. -
Hello All,
I need some serious help, Adobe support is closed today and I need CS4 to install. Here is my situation, I recently bought my imac along with cs4 and everything was working perfectly. On Saturday like an idiot, I tried to add PS to my dock and I accidentally moved my whole PS folder off of my HD. I put the folder back into my HD applications folder, but then when I tried opening an existing PS file, I received a message to reinstall PS. I put in my CS4 disk, click setup, put in my password, see the bouncing icon on my doc and then it just disappears, nothing happens. I uninstalled CS4 totally, even did the clean uninstall thing from Adobe, restored my OS and still nothing! I have been reading the forums and tried everything I read, I deleted the Library/Application Support/Adobe folder, I even deleted the Adobe folder within my Logs folder.
Here is the error I am receiving: "'std::runtime_error' Invalid path passed to FileSystemPath constructor".
Why can't I insert the disk and it work like it did when I first bought the disk! I am so frustrated!
I appreciate any help any could give me!
Thanks!Could you describe what you have tried?
To make sure you are copying the old sessionstore.js file to your currently active Firefox profile folder, you can open that folder from inside Firefox as follows (either):
* "3-bar" menu button > "?" button > Troubleshooting Information
* Help menu > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Please note that before touching the existing sessionstore.js file, you should exit Firefox and allow time for it to close files. Either:
* "3-bar" menu button > "power" button
* File menu > Exit
Then rename it to sessionstore.old before copying in the file you want to use.
Note: if Windows does not show .js extensions on file, please see the steps in this article to show them so you can work with files as accurately as possible: http://support.microsoft.com/kb/865219 -
Help - Crystal reports 2008 - will not work
I am a Systems Administrator for a small company of 450 users.
I am unfamiliar with Crystal reports
We have a recent problem with Crystal Reports 2008, only 1 user in the company uses it.
Since I recreated a windows profile on this users PC who has Crystal installed.
She is using .CSV files as her data sources. These CSV files are on her local machine.
She is trying to load an RTM template file, then do a refresh, and it asks for a datasource?
We try to select Excel, but it asks for a username and password to connect to the excel Datasource, and anything we type in fails.
Previously a refresh just worked.
I uninstalled reinstalled, still asking to select datasource.
I installed this originally 4 months ago and we did not have this problem.
Can you please assist?Hello,
Sounds like possibly a Microsoft update which altered the security settings either on the CSV or the folder where it's located.
Can she create a new report off the CSV if she copies it locally? I assume the csv is on a network share?
Don -
My earphones will not work.I have tried every sound setting in preferences and still no sound.
ear phones will not work. tried all sound settings in system preferences and still no sound
1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
-
Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.
Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem? -
I tried importing email addresses from gmail and now my address book is locked up and will not work. Do I need to delete my address book software and reinstall? If so, what is the proper way to do this? New to Macbook software. I have tried several things and nothing has helped. I have backed up photos, movies, etc. My addresses are on my iphone so I can sync them later right if I loose my data?
Thanks for your time and expertise,
T.You can probably resolve this by removing some Address Book preference files rather than deleting your Address Book application.
First turn off Synchronize in Address Book Preferences if you can.
Next restart Address Book and try to export everything to your Desktop.
I have had a play and found my Address Book preference files. In the following ~/Library is the Library within your Home folder. Any numerals may differ on your Mac. Quit Address Book before doing anything with these.
1 - Display details and things set in Address Book Preferences
~/Library/Preferences/com.apple.AddressBook.plist
2 - Has no data - not sure what this does
~/Library/Preferences/com.apple.AddressBook.abd.plist
3 - Has last sync date - may have more if I used sync
~/Library/Preferences/ByHost/com.apple.AddressBook.sync.000393735c06.plist
4 - My contact details
/Library/Preferences/AddressBookMe.plist
5 - Individual addresses and groups stored as separate files within:
~/Library/Application Support/AddressBook/Metadata
6 - All of these addresses are are also in this single database:
~/Library/Application Support/AddressBook/AddressBook-v22.abcddb
If you wish to remove all addresses drag both 5 & 6 to your Desktop.
If you wish to reset preferences drag 1 your Desktop.
Removing 3 may resolve sync issues but I am unable to test this.
If you wish to reset everything drag all except 4 to your desktop.
Apple has an interesting page at: http://support.apple.com/kb/TS2481
I hope this helps. -
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I need help installing Lightroom 5. I tried the trial and it does not have an uninstall feature. Thus, I'm trying to activate with my new $9.99 per month subscription and it simply will not work. Very frustrating you already took my money and no results, and very difficult to get help.
Lightroom Trial uninstall wrote:
Very frustrating you already took my money and no results, and very difficult to get help.
Just for clarity, "we" haven't taken your money - this is a user-to-user forum, and you're not talking to Adobe.
Like Rob I'm a Windows user, and - like him - I thought "uninstalling" on Macs was simply a case of trashing the application. Google would seem to concur.
Not really a Lightroom/Adobe issue, then? -
Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?
When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.
-
I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working? Help, I cannot find the button to free up my camera!!
If you installed some kind of software to take part in the conference, remove it.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!
There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
See this: <br />
[http://vistasupport.mvps.org/run_as_administrator.htm]
Maybe you are looking for
-
How do I get Logic to reference files instead of importing them?
Hey guys, I've been trying to figure this out for a while now with no luck. How do I get Logic X to reference audio files on my hard drive without importing them in to the project itself? I've got a lot of remix type tracks that use long audio files,
-
BAPI for invoking 'Stop Transaction'
Hi, Is there any BAPI to stop the running of any function module or report after some time by specifying the time. If any FM or report goes running for long time need to invoke BAPI to stop the same. Regards, Ram
-
IPhone resets photo numbers every sync
This seems to be a new problem since I purchased iPhone 4. Every time I sync my photos it resets the file names back to img_0000.jpg. This is super annoying when it comes to organizing photos in folders as many times you end up with the same file nam
-
Confirm box or alert box need twice click
I recently install safari on my Window XP System. I use it to visit a web site,if there is a button can popup a confirm box,I need to click[OK] twice to close it. Then I write a HTML page with javascript to test it. when I write the javascript func
-
Change Parameters on Scheduled request
Hi, Is there a way, maybe profile setting, to go back into one of your scheduled reports from the concurrent manager and modify the parameters? Thanks, Ken