Help needed in Joining tables for Help view

Hi All ,
My requirement is create a search help , using a view which will join four table ,
I was able to do using a databaser view and joining below tables
KNA1     MANDT     =     KNVV     MANDT
KNA1     KUNNR     =     KNVV     KUNNR
TVV5     MANDT     =     KNVV     MANDT
TVV5     KVGR5     =     KNVV     KVGR5
TVV5     MANDT     =     TVV5T     MANDT
TVV5     KVGR5     =     TVV5T     KVGR5
But thes is doing a inner join and help is not providing valuse where tghere are no entries for KNVV-KVGR5
for outer join i came to know we use hep view s instead of database viow ,
But i have problem joining these table s while creating Help View .
Any Help will be appricaited
Thanks
Vinay Kolla

Hi Vinay,
Use the tabls in below given order to get the right view.
KNVV
KNA1
TVV5
TVV5T
KNA1-MANDT = KNVV-MANDT
KNA1-KUNNR = KNVV-KUNNR
TVV5-MANDT = KNVV-MANDT
TVV5-KVGR5 = KNVV-KNVV
TVV5-MANDT = TVV5T-MANDT
TVV5-KVGR5 = TVV5T-KVGR5
Regard
Anees

Similar Messages

Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

Help need my mac pro for school..it has Grey screen..spinning wheel...
I think I have mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long. I haven't done a back up due to no external for time machine.
I hope someone can please help me I've been going crazy for a week now trying to figure this out. I use my computer for school and I'm currently very behind from in my school work thank you
Also I've checked my available space 424.91 free of 750 gigs....disk is verified

Welcome to the Apple Support Communities
Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

I need an phone number for help from Chile. I need cancel subscription

I need an phone number for help from Chile. I have two subscriptions, one personal and one for team. I need cancel one.

Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

This is my first Mac, I need on best site for Help me.

This is my first Mac, I need on best site for Help me. Video is Better.

http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ (for PC-Windows switcher)
http://www.apple.com/findouthow/mac/ (videos)
Stefan

HELP needed !!! pleace help !!

I have a problem. this is the site (
http://home.planet.nl/~onbe1102/prikbord.html
its a flash site and when i click to the name buttons i would
like to open a *.XLS file or a site.
the action fore the buttons ar now:
btnWilliam_mc.onRollOver = function() {
btnWilliam_mc.gotoAndPlay("_over");
btnWilliam_mc.onRollOut = function() {
btnWilliam_mc.gotoAndPlay("_out");
btnArnold_mc.onRollOver = function() {
btnArnold_mc.gotoAndPlay("_over");
btnArnold_mc.onRollOut = function() {
btnArnold_mc.gotoAndPlay("_out");
btnAbal_mc.onRollOver = function() {
btnAbal_mc.gotoAndPlay("_over");
btnAbal_mc.onRollOut = function() {
btnAbal_mc.gotoAndPlay("_out");
pleace help !!! what am i doing wrong????
HELP needed !!! pleace help !!

You need a command that tells the button to open something
btnAbal_mc.onRollOut = function() {
getURL("name.xls or what ever", "_blank");
The rollover and rollout are animations and you needed to
tell the buttons to do something. Hope this helped

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

Help needed with locking tables+Mysql

Hello!
I have a table "A" which is of kind "auto_increament" (field "A1")
When I do an insert in A I need to know the next "auto_increament" index because I have to encrypt that index into another field in A lets say this field is called A2.
I understand that I have to do like like I do below (the semantic syntax) but I dont know the java syntax for locking tables and getting the next "auto_increament" index. The "lock type" of the ttable should be so now one else can write to the table.
--------semantic syntax---------------
1) LOCK A
2) Get "next" index from A
3) Make an insert
4) UNLOCK A
Very greatful for help!
Regards/D_S

http://www.mysql.com/search/?q=jdbc+autoincrement&base=http%3A%2F%2Fdev.mysql.com&lang=en&doc=0&m=a

Help Needed in Join

Hi,
Am using oracle 10g.
I have two tables namely Table A, Table B. having common column b/w these two tables.
Table A
Id
Name
Age
Table B
ID
Salary
designation
My output needed as follows,
ID, Name,Age, Salary,Designation
I want to join Table A and Table B based on Id and display all the fields. I am able to do this. But some occasions the Id will not be in available Table A or Table b.
for ex : ID = 5 will be available in Table A and which doesn't available in Table B then my output should have salary and designation will be NULL.
On the other hand ID=5 will not be in Table A and Available in table b then in my output will be name, age will be null and salary and designation will have data.
we cannot use right/left outer join on this logic. Please suggest me join do i need to do for this logic with some sample queries.

born2win wrote:
we cannot use right/left outer join on this logic. Please suggest me join do i need to do for this logic with some sample queries.You need a FULL OUTER JOIN in this case :
SELECT *
FROM tableA a
FULL OUTER JOIN tableB b on a.id = b.id ;

Help Needed: Enable local currency for Customer Invoicing

We are needing to enable local currency for customer invoicing on a project coming very soon. Does anyone have any information on the best way to get this done and/or documentation to look over? Any help would be greatly appreciated!!
Thank You in Advance!
Jay Esparza
SAP Functional Consultant

Hi
Local currency automatically gets activated as you set your company code currency.
No need to enable separately for customer invoicing
Plz assign points if it is helpful.
Regards
Tapan

Help needed in 'Using iTunes for Mac' Forum

Help please!
I seem to be going round in circles trying to help someone and don't have access to the Lounge to issue a request for help with this thread:
http://discussions.apple.com/thread.jspa?messageID=3624439#3624439
Any knowledgeable iTunes users are welcome to post a second opinion.
Thank you,
Colin R.

I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.

Help needed on SAP tables

I have a Report in BEx ...It has information related to Vendor & total openitems for him.
i need to verfiy this data in ECC.
In which table i can find this information??
Thanks
Nilesh

Hi
It has related to MM.
So please find the below link it will provide the Source tables for all MM DS.
http://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.

Help Needed-Connection Url String for Oracle8i

DriverManager.getConnection(Url , username ,password);
In the above , I need the connection url for Oracle8i Database.
Thanks..

This works for me:
jdbc:oracle:thin:@HOST:1521:INSTANCE
Where HOST and INSTANCE represent the machine running oracle and DB instance. 1521 is the default port but may be changed.
Mike

Joining tables for Mobile apps

can i access multiple table(like normal join) from one CallResponder's token for my mobile apps(flex 4.6)..if we can ,then how can we do this..i think, there is some solution,but i'm not aware of it.. please give me a short demo or link..how can you join table,by data binding.. thanks..

+1 for this. it's taking a while to lad on my 2 year old ipad mini, so this would probably help. though in my case, it's going to be an iOS install that needs to ho on a diet.i haven't worked out if it's the player part of the spp that's swelling or additional social aspects of the app that sre growing in size unecessarily.all things said, a music player shouldn't really need to be 75mb+.the android install on my htc m8s is about 13mb, by comparision, less than 2 thirds of the install size.

What is the better way to join table for ASE 12.5?

To join table with T-SQL, there are 2 options:
select * from tab1 a join tab2 b on a.id = b.id where x=y
select * from tab1a, tab2 b where a.id = b.id and x=y
this is only a syntax difference or there is a performance difference? which one is better for performance?

The first query (using the join clause) is the ANSI standard way of writing joins and is usually supported by all mainstream RDBMSs.
The second query is the T-SQL method of writing joins and may have limited re-usability with other RDBMSs.
In most cases which one you use is usually one of preference, ie, which ever one you're comfortable with.
From a technical perspective there are some join constructs that you cannot build with T-SQL joins, but can build with ANSI joins (eg, you may have problems in T-SQL with a table that you want to be both a) an inner table of an outer join and b) part of a equi/inner join).
Soooo, ANSI joins provide you a lot more flexibility in coding as well as portability (between other RDBMSs). But if you're going to work with ASE you'll still need to understand how T-SQL joins work as you'll see quite a lot of T-SQL join-based queries.

Additional field in join table for CMP EJB

Hello,
I'm trying to perform this task using CMP entity beans:
The entity A has a CMR relation of cardinality m-n with entity B (bidirectional) (This is working fine).
I want to add a parameter to the relation.
Ex : When I find that A1 is linked to B1, I need to perform "x" times an action. x would be my parameter, and I would have kept this parameter as an additional column in the join table A_TO_B.
Could anyone provide an example of how to perform this with CMP EJB?
NOTE: I'm using OC4J 10g 9.0.4 standalone (and cannot change my version).
Thanks
Tanguy

Manohar,
You need to create an append structure for table VBAP (for example ZAVBAP) using SE11. In this structure you create your ZZ fields. If you need a non-SAP domain/data element for your field then you need to create it first using the same transaction and activate it. Attach ZAVBAP to VBAP so the SE11 shows:
.APPEND in the Fields column and
ZAVBAP in the Field type column.
Your ZZ fields will be shown automatically.
When you have finished then activate your ZAVBAP structure. You will notice when you go VA01 (for example) that a lot of programs are being recompiled. Don't worry. It will be ok.
The user-exit screen number for items is 8459 (in program SAPMV45A).
Thanks,
Wojtek

Help needed in Joining tables for Help view

Similar Messages

Maybe you are looking for