Help Needed regarding the Header Information

Hi,
I am doing a File to IDOC Scenario for CREMDM. The problem I am Facing is that the Basic type is as CREMDM but it should be CREMAS. I am invoking the Function Module IDOC_INPUT_CREDITOR_MDM and I have made a 'Z' out of that. I have also Used a Custom Process Code to link with this Z Function Module, but it is giving me the Error that " Wrong Function Module Called up". In this Z Function Module I have also checked the Exception of "WRONG FUNCTION CALLED".
Can someone tell me the details of how I can know from where the Header Information is being populated and how i.e. the EDI_DC part.
I did the same thing (i.e. made a Z Function Module and a Z Process Code for DEBMDM) and it is working. In case of the CREMDM scenario, there is a check in the Function Module which checks the IDOCtype and it is giving an error there, whereas in the Header it is coming as CREMAS04 but the Function Module is Giving me an Error.
 Can someone Suggest me how I can go about a file to IDOC Scenario for CREMDM and which Function Module i need to Invoke.
Thanking in anticipation.
Warm Regards
Somnath

Hi,
Since this is file to idoc scenrio,the header inforamtion will be populated with the information provided in the mapping part i.e,it will be dependent on the fields mapped during the message mapping in XI .
so the edc_dc control record parameters should be populated with the parameters mapped during the messsage mapping,depending on the file parameters or the constant defined during mapping.
and in your case if the message type is CREMDM then the basic type has to be CREMDM04,which u hav to chk with the xi ppl who performed the mapping.since it is mapped to CREMAS04 u r getting a error in function module.so try changing basic type to CREMDM04.
regards
jithesh

Similar Messages

Help needed regarding the updation of "Relationships" in BP

Hello Guys,
This is to request you to kindly help me regarding the following.
We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
Regards,
Kishore.

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding the deployment architecture for PROD env

Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and Regards

Hi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein

Help needed regards the usage of STL.....with CC

Hi All,
I am relatively new to SOLARIS. I am trying to figure out the options for using the STL components in the project.
The project needs to be compiled with both CC ang g++, should support both SOLARIS and LINUX systems. That's why i am going for STL components rather than using the RW-Components of Tools.h++.
I have the following doubts regards the usage of STL.
CC provides the -library option to link the libraries we require.
The following is what i understood from the documentation:
No ( -library ) option provides - default libraries included -lCstd -lCrun -lm -lw -lcx -lc+
-library=iostream+ - libraries included -liostream -lCstd -lCrun -lm -lw -lcx -lc+
-library=iostream,no%Crun+ - libraries included -liostream -lCstd -lm -lw -lcx -lc+
-library=stlport4+ - libraries included -lstlport4 -lCrun -lm -lw -lcx -lc+
-library=iostream,no%Cstd+ - Invalid combination, some header files missing [[ *iostream, sstream* ]]
When we try to make a new project, which of the following is recommended?
#! - Use libCstd suppplied along with solaris package.
When solaris makes a new release, is it always guaranteed that project is compatible with new libCstd ? (Is there a backward compatibility?)
The STL components which can be used in the project are limited. i.e we can use only those that come along with libCstd.....right?
Might not be compatible with other c++ compilers. ( Not compatible with g++ ) Right?
#2 - Use libCStd along with libiostream
Can we use STL (supported by libCstd ) + Classic-iostreams and still have the backward-compatibility?
Compatible with other C++ compilers....provided care has been taken of the CC STL Specializations. ( Compatible with g++ ) Right?
#3 - Use stlport4. Is it stable and backward-compatible ?
We can exploit usage of STL to the maximum.
Is it guranteed that the project (using -library=stlport4 ) will be backward compatible ?
Can the SunStudio (ORACLE) organization gurantee that stlport will take care of the changes in the CPP standards ?
i.e Is it guranteed that STLPORT and SUN-STUDIO packages will always be in sync?
Among the above three which is preferred method to go ensuring stability and backward-compatibility.
Thanks in advance.
Cheers,
Sreekar
Edited by: 855323 on 20-Oct-2011 04:04
Edited by: 855323 on 20-Oct-2011 04:04
Edited by: 855323 on 20-Oct-2011 04:06

In general, you don't need any options to use the C++ Standard Library (which includes what is sometimes loosely called the "STL"). Consider this toy program:
// file vec.cc
#include <vector>
#include <iostream>
int main()
 std::vector<int> vi(10);
 vi[1] = 1;
 std::cout << "vi[1]=" << vi[1] << '\n';
}You can compile and run the program as either
CC vec.cc && a.out
g++ vec.cc && a.outWith CC, by default you get the original libCstd. You use the -library option to select STLport or (on or selected versions of Solaris) Apache stdcxx instead. With g++, you just get the g++ library libstdc++, which should be suitable for all purposes.
For a discussion of which library to select with CC, see this thread:
Differnce between LibCstd and LibStlport
The optional libiostream is provided to provide support for programs written for the very old version of iostreams that was provided with the original AT&T Cfront compiler in the 1980's and early 1990's. There is usually no reason to use this obsolete library with code written after 1998.
The Solaris libCstd.so.1 (and libCrun.so.1) is always compatible with various releases of Studio, with one caveat: Each Studio release specifies the minimum patch level of Solaris libraries that is required to run programs created by the compiler. Any newer version of the library is guaranteed to be compatible. Thus, it is always safe to update the library, and an update might be required when using binaries created by a newer compiler.
A version of the STLport library ships with the compiler. C++ binaries created by an older compiler that link to libstlport.so.1 should still work when linked into a program created by a newer compiler. Use of the static libstlport.a is generally not safe when mixing binary code from different compiler releases.
Binaries created by Studio CC in default mode are not compatible with binaries created by g++. Even if you can get a program to link, which is doubtful, the program is not likely to run correctly.
Studio CC does provide a g++ compatibility mode as follows:
On supported versions of Linux with Studio 12.2 (C++ 5.11).
On Solaris/x86 and supported versions of Linux with Studio 12.3 (C++ 5.12).
In this mode, CC uses the g++ headers and the g++ runtime libraries.
Refer to the -compat=g option in the C++ Users Guide for details.
We plan to support the new C++ Standard, C++11, in a future compiler release. Because the ABI (binary interface) used by the current compilers is not adequate to support all the new features in C++11, we expect binaries built in C++11 mode to be incompatible with binaries created by earlier compilers. None of the existing C++ support libraries will be used in C++11 mode. A new library that provides full C++11 support will be used instead. We expect the new compiler to continue to provide the current C++03 mode as an option, being source and binary compatible with our earlier compilers.
Edited by: Steve_Clamage on Oct 20, 2011 10:00 AM
Edited by: Steve_Clamage on Oct 20, 2011 1:29 PM

Help needed regarding the client server communication

this is regarding my networking project which at present i am doing it in java...
the project is abt establishing a server in my lab that controls all the other systems in that lab... now the problem is i have to shut down all the systems in the lab from the server on a click of a button.... this i need to do using socket programming to which i am new....
So can anyone pls send me a sample code as to how to pass a command from server to shut shut down all the systems(clients) ..i need a java program that uses sockets concept to perform the above mentioned operation...pls note i am trying to establish a linux server
regards
lalita

Dear hiwa
i can use it but the constraint in my project is to use only the Socket programming due to time lacks.... i have to find a faster way to communicate between the server and the client...
can u pls help me find a solution for this via sockets...
hoping a favorable response
regards
Lalita

How can I include the Header Information....for a File to IDOC Scenario

Hi,
I made a File to IDOC Scenario with DEBMDM06 for MDM>XI>SAP R/3. The Header Information in the XML File which is at the XI end is Missing. For that reason In Tcode SXMB_MONI we are getting an Error that "HEADER Information Missing: Message should Start with EDI_DC40" i.e the Header Information.
My Question is that whether we can do some changes in the Message mapping Step in the Integration Repository. I HardCoded the Few mandatory Fields that were there but it Again gave me the Same Error as above.
Can you please Suggest some Solution for this. Since the data is Coming in from MDM part the Header information is not there but It actually Important as it has got all the Port Information.
Kindly Inform me some Solutions.
Thanks & Regards
Somnath

Hi Suraj,
Thanks for ur Reply, but Since we are Doing a File to IDOC Scenario the IDOC DEBMDM is on the Right Side in Message Mapping and as U know it is Mandatory to Map an IDOC on the Right Part. EDI_DC40 is coming as it is there in the IDOC but our XML File Does not have that. If we Don't Map then it Becomes RED, which is an Error.
Furthermore in the Receiver Agreement we have put the Necessary Details such as Sender Service and Receiver Service along with the IDOC Communication Channels.
Can U give as a Better Insight on this Note how to check the Header Part as it is mandatory to MAP.We also tried to HARDCODE it by putting those Values and Mapping them to a Constant but it is Giving the Same Error.
Thanks and Regards
Somnath

Help needed regarding custom reports

hello,
I am using EM 10.2.0.2 on windows 32-bit.
All EM components are installed on a single machine.
Have installed AGENT 10.1.0.5 for managing targets which are on LINUX 2.1
Please help me in getting the solution for the following queries:
(a)I need to create a custom report regarding the CAPACITY MANAGEMENT .
(b)I have some UDM defined but I am not able to use these UDM while creating custom report.
(c)Also is there any possibility that we can use views other than REPOSITORY VIEWS. What I meant was : instead of using REPOSITORY VIEWS can we use the tables of the target instances.
Thanks in advance.

You might want to try posting your question to the Grid Control Forum.
Enterprise Manager

How to print the header information journal from FB03

Hi
I would like the FB03 to show the header e.g. Entered by/ Parked by on the screen, without clicking the header button. So I can print the journal via printer with those information.
Thank you
Sirirak

Hey,
This also depends from the SAP release that you are using.
Release undependent I suppose you have the following possibilities:
- Use the line item extract report S_ALR_87012347. Here at least you can see the entry date (this transaction does of course not work for parked documents.
- Create a query on an infoset mit logical database BRM
Best regards,
Koen

Help needed with the script

Hi all, I am a novice in scripting...
Could someone help me writing script for the following....
Assume that there are 5 folders
1 /etl/dev/work/wellness/enrl_rej/records
2 /etl/dev/work/wellness/enrl_rej/metadata
3 /etl/dev/work/wellness/enrl_rej/header
4 /etl/dev/work/wellness/enrl_rej/hdrrej
5 /etl/dev/work/wellness/enrl_rej/fields
need to check if there is a file created in any of the above five locations,
If the file Exists in Location 1 then
send message with Subject 'process complete and attached are the rejected records' with the file in that folder as attachemt
if file exists in Location 2 then
send message with Subject 'Metadata Mismatch no of fields in detail didn't match' With the file in that folder as attachment
If file exists in 3 then
send message with Subject 'Problem with header file - File Rejected' With the file in that folder as attachment
If file exists in 4 then
Send message with subject 'the Percentage of rejects more than 3 percent File rejected' With the file in that folder as attachment
If file exists in 5 then
Send message with subject 'The header and detail count didn't match File rejected' With the file in that folder as attachment
Thanks in advance !!!

Hi,
Assumptions :-
uuencode command exits
mailx command exits
File name is "vas.txt".
Mail id is "[email protected]"
# START OF SCRIPT
#!/bin/ksh
vasFileName="$1"
vasRecordsDirFile=/etl/dev/work/wellness/enrl_rej/records/${vasFileName}
vasMetatdataDirFile=/etl/dev/work/wellness/enrl_rej/metadata/${vasFileName}
vasHeaderDirFile=/etl/dev/work/wellness/enrl_rej/header/${vasFileName}
vasHeaderRejDirFile=/etl/dev/work/wellness/enrl_rej/hdrrej/${vasFileName}
vasFieldsDirFile=/etl/dev/work/wellness/enrl_rej/fields/${vasFileName}
if [[ -e ${vasRecordsDirFile} ]]
then
uuencode ${vasRecordsDirFile} ${vasRecordsDirFile} | mailx -s "process complete and attached are the rejected records" [email protected]
elif [[ -e ${vasMetatdataDirFile} ]]
then
uuencode ${vasMetatdataDirFile} ${vasMetatdataDirFile} | mailx -s "Metadata Mismatch no of fields in detail didn't match" [email protected]
elif [[ -e ${vasHeaderDirFile} ]]
then
uuencode ${vasHeaderDirFile} ${vasHeaderDirFile} | mailx -s "Problem with header file - File Rejected" [email protected]
elif [[ -e ${vasHeaderRejDirFile} ]]
then
uuencode ${vasHeaderRejDirFile} ${vasHeaderRejDirFile} | mailx -s "the Percentage of rejects more than 3 percent File rejected" [email protected]
elif [[ -e ${vasFieldsDirFile} ]]
then
uuencode ${vasFieldsDirFile} ${vasFieldsDirFile} | mailx -s "The header and detail count didn't match File rejected" [email protected]
else
echo "File doesn't exist in any of the directories mentioned."
fi
# END
Vijay Bheemineni.

Help needed regarding replication in ds5.2sp4

Hi ,
I am new to ldap . I am able to establish replication between master and consumer and trying to update it is getting update but i am geting the following error
in error log
INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replication bind to consumer alpha.ad.com:19941 failed:
[16/May/2007:13:48:26 -0700] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer alpha.ad.com:19941
[16/May/2007:13:48:26 -0700] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
Please help me regarding this .
Message was edited by:
ap7926

If data is getting replicated from master to consumer then the bind for that specific replication agreement is working.
Check your timestamps and current log entries. Are the "Failed to connect to replication" messages currently being generated? As long as your replication agreement is enabled the supplier will try to keep things up and running, retrying a failed consumer regularly (and generating about 1 set of log messaages per minute on my systems). So you'll get those messages on the supplier when a good consumer is down (the nsslapd directory server process that is).
If you don't have these messages being generated currently then this probably means that your consumer was down around "16/May/2007:13:48:26 -0700" but is ok now. In that case those messages aren't of big concern. They're just telling you that you had a problem, which you hopefully already knew about.
If replication is working (test by making a change on the supplier and checking it on the consumer) AND you're still concurrently getting these messages regularly then you have something interesting going on, probably due to a configuration issue. Without seeing the details it's difficult say what it would be.

Regarding the harware information.

hello there..!!
i purchased a laptop recenty with highest specification for my needs...but some days before the wifi stopped working i mean the wifi card...i tried all sort of software solutions possible at last handed over to a authorised service centre nearby..they replaced my old intel centrino 7260 dual band 802.11ac card with a Ralink 802.11 b/g/n...
what should i do now....
and if by providing the required information of my laptop can i come to know the details of the network card which was present when i purchased my laptop...
thank you...

We need this to verify the wifi device it accepts..
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Help needed regarding Segment Qualifiers

Hi,
In my process of implementing Apps R12 afresh, we just created the segments and assigned them their flexfield qualifiers today. In that, the one assigned towards alancing segment shows the value qualifiers like that of natural accounting segment, unlike the bal. segment value qualifier.
I mean, when we try to insert a a value in the bal.segment it asks for qualifiers such as nature:expense/revenue/liability/asset, instead of going for the allow posting and allow budgeting alone. This is crazy, and I need your support.
Thanks,
Mukunthan L

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed Regarding Project Server - 2013 Workflow

Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shanky

Hi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky

Help needed regarding BADI.

hi all,
can anyone plz tell me how to define BADI and how create an interface.
plz tell from everything regarding that, i have work with basic ABAP only.
anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
regards.
raman.

Hi Raman,
Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
The specified item was not found.
BADI
Best Regards.

Help needed regarding font sizes

Iam generating pdf documents using oracle developer's report builder.
When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
Is there any parameters that has to be set for it.Pls help

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help Needed regarding the Header Information

Similar Messages

Maybe you are looking for