Help needed to merge catalogs

I have LR4 on an old pc on which I have done lots of editing with photos that I keep on an external hard drive.  I recently went abroad and bought a new laptop and installed LR4 on it.  I have already edited some photos in it, and so now I have 2 lr4 catalogs.  I now want to copy the catalog I have on my old pc to my new one, but because they have the same name my pc asks if I want to replace the existing lrcat file, which obviously I don't!!!

Do you want to have two separate Catalogs, or do you want to merge both these into one Catalog?
To merge, you can (after ensuring that your external drive will appear under the same drive letter / name on both computers) copy your old catalog onto the external drive. For purposes of merging, you do not need to include the related previews, just the single .lrcat file. You can rename this copy if you want, just to keep everything clear. This catalog can be opened directly on the external drive as you wish, and will refer to the images that are also in the same place - as I say, provided the drive is not named/lettered any different than before.
Then after connecting the external drive to your new laptop you can open your current LR catalog there. Import from Catalog allows you to point to the old catalog on the external drive and add all its contents in (the picture thumbnails, complete with all their metadata, develop edits, collections etc). If you want the images to move to the laptop's internal drive or to some other place, you can do that afterwards inside that same (merged) full catalog of everything.
I believe the previews will need to be re-made for these added images, once they appear inside the combined catalog.
If instead you just want the two catalogs side by side, separate, you can simply rename or move/copy around as needed (when Lightroom does not have them open). If you also move/copy and rename the previews folder identically, that remains active IIRC and does not need to be itself re-generated when that same catalog is opened in its new home. However the previews are complex and slow to copy over, and it may not be worth the trouble.

Similar Messages

  • Help needed in MERGE statement

    Hi,
    I am new to PL/SQL, I want to update a table called "final_test" based on the below query result.
    1. I want to check whether that particular record is present or not in my "final_test" table.
    2. If its present in the "final_test" table and the process_status got changed then I want to update that alone in my "final_test" table.
    3. If its not present then I want to insert that record into my "final_test" table.
    Basically I am retrieving the report and its status for a particular date.
    select
    b.id,
    a.name,
    a.t_name,
    c.process_status,
    c.time_process
    from rep_tab_map a, j_tab_map b, proc_status c
    where a.t_name=b.t_name
    and b.id=c.id (+)
    and trunc(c.date_start)=trunc(sysdate -1)
    group by a.name,b.id,c.process_status,c.time_process,a.t_name
    order by 2
    I thought of using Merge statement but i am not sure what i have to use in ":USING" and "ON" clause.
    Please help me with MERGE or with someother way.
    Thanks

    Assuming final_test has same structure as select list in your query:
    merge
      into final_test a
      using (
             select  b.id,
                     a.name,
                     a.t_name,
                     c.process_status,
                     c.time_process
               from  rep_tab_map a,
                     j_tab_map b,
                     proc_status c
               where a.t_name=b.t_name
                 and b.id=c.id(+)
                 and trunc(c.date_start)=trunc(sysdate -1)
               group by a.name,b.id,c.process_status,c.time_process,a.t_name
            ) b
      on (b.id = a.id)
      when matched then update set a.name = case a.process_status
                                              when b.process_status then a.name
                                              else b.name
                                            end,
                                   a.t_name = case a.process_status
                                                when b.process_status then a.t_name
                                                else b.t_name
                                              end,
                                   a.process_status = b.process_status,
                                   a.time_process = case a.process_status
                                                      when b.process_status then a.time_process
                                                      else b.time_process
                                                    end
      when not matched then insert(
                                   a.id,
                                   a.name,
                                   a.t_name,
                                   a.process_status,
                                   a.time_process
                            values(
                                   b.id,
                                   b.name,
                                   b.t_name,
                                   b.process_status,
                                   b.time_process
    /SY.

  • Help needed on Merge statement

    Hi,
    I want to merge a record which has a LONG field to a table with LOB field.
    Am getting error "ORA-00932: inconsistent datatypes: expected - got LONG" at "to_lob(col2) " in the query. Please help in resolving this.
    Thanks
    RK
    MERGE INTO message_STG d
    USING (SELECT col1,to_lob(col2) col2
         FROM message jm
         WHERE modificationdate >= <some_date_value> ) f
    ON (d.MESSAGEID= f.MESSAGEID)
    WHEN matched THEN
    UPDATE SET
    col1=f.col1,
    col2=f.col2
    WHEN NOT matched THEN
    INSERT VALUES (f.col1,f.col2);

    Am getting error "ORA-00932: inconsistent datatypes: expected - got LONG" at "to_lob(col2) "If you read the documentation you will discover that to_lob() only works in an insert statement.
    What you will have is create a holding table with a CLOB column and insert all your MESSAGE records into it, doing the TO_LOB() there. Then you can drive your MERGE statement from that holding table.
    Is this a one-off data migration exercise or something you'll have to do regularly?
    Cheers, APC
    Blog : http://radiofreetooting.blogspot.com/

  • Help needed to merge values from two tables -

    We have these three test tables shown, which have a common ID; And amount fields; I want the -------
    test1.val = test2.val + test3.val
    when they have common ids in them;
    I have shown the test data below: And the expected output;
    NOTE: In database with real table values - each of them have millions of rows in them. So effeciency is very important here;
    SQL> desc test1;
    Name Null? Type
    ID NUMBER
    VAL NUMBER
    SQL> desc test2;
    Name Null? Type
    ID NUMBER
    VAL NUMBER
    SQL> desc test3;
    Name Null? Type
    ID NUMBER
    VAL NUMBER
    SQL> select * from test1;
    ID VAL
    1 50
    2 50
    3 55
    4 60
    5 20
    5 rows selected.
    SQL> select * from test2;
    ID VAL
    1 25
    1 25
    2 5
    2 5
    4 75
    5 rows selected.
    SQL> select * from test3;
    ID VAL
    1 25
    1 25
    2 5
    2 25
    2 25
    5 10
    6 rows selected.
    I EXPECT the output to be:
    SQL> select * from test1;
    ID VAL
    1 100
    2 65
    3 20
    4 75
    3 20
    5 10
    6 rows selected.

    Need help with the update queries - joining three tables -

  • Help needed to  merge calenders

    iphone ios5 calender question-I only have 1 phone and 1 laptop.I need just 1 calender on the phone but somehow I have two slightly different ones that need to be merged on the phone so that the repeated items are eliminated and the different items stay. How do I do that? I don't have (or care to have) a calender on my laptop.

    I should mention that my laptop is using Vista 7 (not MAC).Thanks.

  • Help needed with PSE9 Catalog issues

    I have been a PSE user for sometime, going back to PSE 3.0. In Jan, I purchased PSE 9, converted the catalog from PSE7 and have been working more heavily with the catalog lately. Two problems have arisen. The catalog is using the wrong thumbnail in some cases. Only when I double-click on an image does it "re-link" and bring up the proper thumbnail. Then I notice that some images have the incorrect tags, usually on the ones with the wrong thumbnails.
    I am almost ready to take the radical step of deleting my catalog entirely and starting over on the 5,000 plus images. Not looking forward to that task. Is there another fix possible? I have tried restoring and repairing the catalog, but neither one fixed the problem...

    You can use Edit...Update Thumbnail on selected images.  With 5K images, you'll probably want to do it in stages, perhaps one folder at a time.
    I don't think that Optimizing or Repairing the catalog will solve your problem, but I could be wrong about that....
    Ken

  • Help! Standard v7 I need to merge pdf's or ps files

    I need to merge two lists of pdf's or ps files and create one single list of pdfs (or ps files I prefer the output to be pdf). So I'll have two folders(1&2)
    Folder 1 Folder 2
    a.ps a.ps or a1.ps ( whatever I need to do)
    b.ps b.ps or b1.ps
    c.ps c.ps or c1.ps
    d.ps d.ps or d1.ps
    I'll need to merge those in a batch process like distiller or something (its just what I am familiar with) and come out with files:
    a.pdf
    b.pdf
    c.pdf
    d.pdf
    I was told its a standard function of pro v9

    dmtx wrote:
    Is this someting zipforms has to give me?
    Help!
    Sounds like all of your questions need to be directed to the folks at zipforms and not here.

  • Help needed Displaying ALV  Secondary list without using oops concept

    Hi Experts
    Help needed Displaying ALV  Secondary list without using oops concept.
    its urgent
    regds
    rajasekhar

    hi chk this code
    ******************TABLES DECLARATION*****************
    TABLES : VBAP,MARA.
    *****************TYPE POOLS**************************
    TYPE-POOLS : SLIS.
    ****************INTERNAL TABLES**********************
    DATA : BEGIN OF IT_VBAP OCCURS 0,
    VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
    POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
    MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
    END OF IT_VBAP.
    ****************TEMPORARY VARIABLES******************
    DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
    DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
    *****************FIELD CATALOG***********************
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    ****************LAYOUT*******************************
    DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
    ***************VARIANT*******************************
    DATA : G_VARIANT LIKE DISVARIANT.
    ****************SAVE*********************************
    DATA : G_SAVE(1) TYPE C.
    *****************EVENTS******************************
    DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
           G_EVENTS TYPE SLIS_T_EVENT.
    ******************PF STATUS**************************
    DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
    ******************USER COMMAND************************
    DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
           R_UCOMM LIKE SY-UCOMM.
    ****************SELECTION SCREEN************************
    SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
    ***************AT SELECTION SCREEN*********************
    AT SELECTION-SCREEN.
      PERFORM VALIDATE.
    **************START-OF-SELECTION**************************
    START-OF-SELECTION.
      PERFORM GET_DETAILS.
      PERFORM FIELDCAT.
      PERFORM LAYOUT.
      PERFORM VARIANT.
      PERFORM SAVE.
      PERFORM EVENTS.
      PERFORM ALV_DISPLAY.
    *********************FORMS*******************************************
    *&      Form  validate
          text
    -->  p1        text
    <--  p2        text
    FORM VALIDATE .
      SELECT SINGLE VBELN
                    FROM VBAP
                    INTO V_VBELN
                    WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'enter valid vbeln'.
      ENDIF.
    ENDFORM.                    " validate
    *&      Form  get_details
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DETAILS .
      SELECT VBELN
             POSNR
             MATNR
             FROM VBAP
             INTO TABLE IT_VBAP
             WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'no details found'.
      ENDIF.
    ENDFORM.                    " get_details
    *&      Form  fieldcat
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCAT .
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'VBELN'.
      WA_FIELDCAT-OUTPUTLEN = 10.
      WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'POSNR'.
      WA_FIELDCAT-OUTPUTLEN = 6.
      WA_FIELDCAT-SELTEXT_L = 'ITEM'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'MATNR'.
      WA_FIELDCAT-OUTPUTLEN = 18.
      WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    " fieldcat
    *&      Form  LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM LAYOUT .
      WA_LAYOUT-ZEBRA = 'X'.
    ENDFORM.                    " LAYOUT
    *&      Form  VARIANT
          text
    -->  p1        text
    <--  p2        text
    FORM VARIANT .
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = SY-REPID.
    ENDFORM.                    " VARIANT
    *&      Form  SAVE
          text
    -->  p1        text
    <--  p2        text
    FORM SAVE .
      CLEAR G_SAVE.
      G_SAVE = 'A'.
    ENDFORM.                    " SAVE
    *&      Form  EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM EVENTS .
      CLEAR XS_EVENTS.
      XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
      XS_EVENTS-FORM = 'TOP_OF_PAGE'.
      APPEND XS_EVENTS TO G_EVENTS.
    ENDFORM.                    " EVENTS
    *&      Form  TOP_OF_PAGE
          text
    FORM TOP_OF_PAGE.
      WRITE :/ ' INTELLI GROUP'.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  ALV_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    FORM ALV_DISPLAY .
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
         I_CALLBACK_PROGRAM             = SY-REPID
         I_CALLBACK_PF_STATUS_SET       = PF_STATUS
         I_CALLBACK_USER_COMMAND        = USER_COMMAND
      I_STRUCTURE_NAME               =
         IS_LAYOUT                      = WA_LAYOUT
         IT_FIELDCAT                    = IT_FIELDCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
         I_SAVE                         = G_SAVE
         IS_VARIANT                     = G_VARIANT
         IT_EVENTS                      = G_EVENTS
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
        TABLES
          T_OUTTAB                       = IT_VBAP
       EXCEPTIONS
         PROGRAM_ERROR                  = 1
         OTHERS                         = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " ALV_DISPLAY
    *&      Form  SET_PF_STATUS
          text
    FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
    ENDFORM.                    "SET_PF_STATUS
    *&      Form  SET_USER_COMMAND
          text
    FORM SET_USER_COMMAND USING R_UCOMM
                                RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN 'DC'.
          READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
          IF SY-SUBRC = 0.
            SELECT SINGLE MTART
                          FROM MARA
                          INTO V_MTART
                          WHERE MATNR = IT_VBAP-MATNR.
            IF SY-SUBRC <> 0.
       MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
            ELSE.
              WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
              WRITE :/ 'MATERIAL TYPE :' , V_MTART.
            ENDIF.
          ENDIF.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE TO SCREEN 0.
        WHEN 'CLOSE'.
          CALL TRANSACTION 'SE38'.
      ENDCASE.
    REPORT  Z_ALV_INTERACTIVE  MESSAGE-ID ZMSG_50651
                                    LINE-SIZE 100
                                    LINE-COUNT 60
                                    NO STANDARD PAGE HEADING.
    ******************TABLES DECLARATION*****************
    TABLES : VBAP,MARA.
    *****************TYPE POOLS**************************
    TYPE-POOLS : SLIS.
    ****************INTERNAL TABLES**********************
    DATA : BEGIN OF IT_VBAP OCCURS 0,
    VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
    POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
    MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
    END OF IT_VBAP.
    ****************TEMPORARY VARIABLES******************
    DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
    DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
    *****************FIELD CATALOG***********************
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    ****************LAYOUT*******************************
    DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
    ***************VARIANT*******************************
    DATA : G_VARIANT LIKE DISVARIANT.
    ****************SAVE*********************************
    DATA : G_SAVE(1) TYPE C.
    *****************EVENTS******************************
    DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
           G_EVENTS TYPE SLIS_T_EVENT.
    ******************PF STATUS**************************
    DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
    ******************USER COMMAND************************
    DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
           R_UCOMM LIKE SY-UCOMM.
    ****************SELECTION SCREEN************************
    SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
    ***************AT SELECTION SCREEN*********************
    AT SELECTION-SCREEN.
      PERFORM VALIDATE.
    **************START-OF-SELECTION**************************
    START-OF-SELECTION.
      PERFORM GET_DETAILS.
      PERFORM FIELDCAT.
      PERFORM LAYOUT.
      PERFORM VARIANT.
      PERFORM SAVE.
      PERFORM EVENTS.
      PERFORM ALV_DISPLAY.
    *********************FORMS*******************************************
    *&      Form  validate
          text
    -->  p1        text
    <--  p2        text
    FORM VALIDATE .
      SELECT SINGLE VBELN
                    FROM VBAP
                    INTO V_VBELN
                    WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'enter valid vbeln'.
      ENDIF.
    ENDFORM.                    " validate
    *&      Form  get_details
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DETAILS .
      SELECT VBELN
             POSNR
             MATNR
             FROM VBAP
             INTO TABLE IT_VBAP
             WHERE VBELN IN S_VBELN.
      IF SY-SUBRC <> 0.
        MESSAGE E000 WITH 'no details found'.
      ENDIF.
    ENDFORM.                    " get_details
    *&      Form  fieldcat
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCAT .
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'VBELN'.
      WA_FIELDCAT-OUTPUTLEN = 10.
      WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'POSNR'.
      WA_FIELDCAT-OUTPUTLEN = 6.
      WA_FIELDCAT-SELTEXT_L = 'ITEM'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_VBAP'.
      WA_FIELDCAT-FIELDNAME = 'MATNR'.
      WA_FIELDCAT-OUTPUTLEN = 18.
      WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
      APPEND WA_FIELDCAT TO IT_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    " fieldcat
    *&      Form  LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM LAYOUT .
      WA_LAYOUT-ZEBRA = 'X'.
    ENDFORM.                    " LAYOUT
    *&      Form  VARIANT
          text
    -->  p1        text
    <--  p2        text
    FORM VARIANT .
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = SY-REPID.
    ENDFORM.                    " VARIANT
    *&      Form  SAVE
          text
    -->  p1        text
    <--  p2        text
    FORM SAVE .
      CLEAR G_SAVE.
      G_SAVE = 'A'.
    ENDFORM.                    " SAVE
    *&      Form  EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM EVENTS .
      CLEAR XS_EVENTS.
      XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
      XS_EVENTS-FORM = 'TOP_OF_PAGE'.
      APPEND XS_EVENTS TO G_EVENTS.
    ENDFORM.                    " EVENTS
    *&      Form  TOP_OF_PAGE
          text
    FORM TOP_OF_PAGE.
      WRITE :/ ' INTELLI GROUP'.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  ALV_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    FORM ALV_DISPLAY .
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
         I_CALLBACK_PROGRAM             = SY-REPID
       I_CALLBACK_PF_STATUS_SET         = PF_STATUS
         I_CALLBACK_USER_COMMAND        = USER_COMMAND
      I_STRUCTURE_NAME               =
         IS_LAYOUT                      = WA_LAYOUT
         IT_FIELDCAT                    = IT_FIELDCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
         I_SAVE                         = G_SAVE
        IS_VARIANT                      = G_VARIANT
         IT_EVENTS                      = G_EVENTS
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
        TABLES
          T_OUTTAB                       = IT_VBAP
       EXCEPTIONS
         PROGRAM_ERROR                  = 1
         OTHERS                         = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " ALV_DISPLAY
    *&      Form  SET_PF_STATUS
          text
    FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
    ENDFORM.                    "SET_PF_STATUS
    *&      Form  SET_USER_COMMAND
          text
    FORM SET_USER_COMMAND USING R_UCOMM
                                RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN 'DC'.
          READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
          IF SY-SUBRC = 0.
            SELECT SINGLE MTART
                          FROM MARA
                          INTO V_MTART
                          WHERE MATNR = IT_VBAP-MATNR.
            IF SY-SUBRC <> 0.
       MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
            ELSE.
              WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
              WRITE :/ 'MATERIAL TYPE :' , V_MTART.
      SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                        WITH P_MTART EQ V_MTART.
            ENDIF.
          ENDIF.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE TO SCREEN 0.
        WHEN 'CLOSE'.
          CALL TRANSACTION 'SE38'.
      ENDCASE.
    plz reward if useful

  • HT1918 itunes hooked up to an e-mail no longer good tried to chg and add new email but it show system set me up with new account instead of updating new email need to merge and use the current email with old account

    I have had itunes for years, however, old account was setup under [email protected] and I no longer have that e-mail or ATT internet service so everytime I want to update my e-mail account with my new [email protected] it wll not let me because I tried to update from my itues account and just changed the e-mail id field and it allowed me to update however it actually just made me have another seperate account under my current e-mal.
    I need to merge the two how can  I do that now that this system has me as two different accounts. One is Tracy Rucker the other one has all of my names
    Tracy Randle Wlliams Rucker?
    Help please no verication e-mails can be verified with the old sbcglobal.net account

    In iTunes, do Store->View my AppleID
    Click "Deuthorize ALL"
    Then, on any computers you still have, do Store->Authorize this computer.  If there are less than 5, you will have no problem.
    You can only do "deauthorize all" once a year, so in the future, if you ever throw a computer away, remember do to "Store->Deauthorize this computer" first.

  • Help Needed in Building JTree

    HI,
    I've a doubt in Building a JTree.It wud be helpful if some one helps me with a better logic for building this Tree..
    I have a tree like this:
    root
    |
    A--B--C--D
    A--B--C--D
    A--B--C
    A--B--C--E--F
    I have the tree nodes like this . i need to merge the nodes like this
    root
    |
    A
    |
    -- B
    |
    --C
    |
    --D
    --E
    |
    --F
    I've tried it in few ways. It doesn't seems to be working.. Can some one help me in giving me a better logic in doing this

    Hello,
    When updating the tree, do not access the tree nodes directly. Update the tree via its (TreeModel).
    to get the model of your JTree use
    DefaultTreeModel treeModel = (DefaultTreeModel)myTree.getModel();to add nodes use the method
    treeModel.insertNodeInto(newChild,parent,offset);and remove nodes using
    treeModel.removeFromParent(nodeToRemove);--
    Regards,
    Ahmed Saad

  • I have two accounts and need to merge into one account. How? Where to even ask this question? Chat will not assist in this.

    Over the years I accidentally opened a second Adobe account, both with product registrations. I need to merge these accounts into one and see no way to do that. Updates to software will not install because serial for previous version not found on upgrade versions now installed. Could the 2 different accounts be a cause for this?  I got no help at all from chat.

    Adobe chat support is likely to be the only resource capable of dealing with your account.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Adobe ID and registration chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-c1.html ( http://adobe.ly/19r6ZDp )

  • Need to Merge an Adobe XML file with a normal PDF

    The problem...
    I have created an order form in Adobe LiveCycle Designer (pre-ES).  The customer's requirements force us to merge their purchase order (a flat standard PDF) with the order form I have created to get the complete PDF to bill with.  Previously we were using a form created in another software and printing to PDF to merge the 2 PDF files.  The thought process with creating a form in LiveCycle Designer was "Oh 2 PDF's we can just merge them" ... we were very WRONG.  And please don't suggest "Packaging" the files... it won't work for our processing system... we've already tried .
    What we know now (had we known it before we'd have never purchased the licensing for LiveCycle Designer to start with)...
    You can NOT merge a PDF that has XML in it with Adobe Proffesional.
    Temporary Solution...
    We know we can print to PDF and then merge the files... this gets us the result we need, but it takes longer to print to PDF from these XML files than it did from the previous versions of the order forms in created in other software.
    Is there another solution? 
    Plea for help!  The users that are forced to do the process of printing to file and merging are ready to riot and/or go back to the "other" software.

    Hello!
    There are a couple terms you can google:
    "PDF Concatenate Forms iText"
    "Merge XML data with PDF Forms"
    Concatenating PDFs means you join multiple forms together into one PDF.
    Did you need to merge, or concatenate the forms?
    Either way there are a couple of methods to do this programmably.
    iTextSharp (.NET)
    iText (Java)
    FDFToolkit.net (.NET)
    iText products are open source, and have a learning curve, and support is provided on a Open mailing list.
    iText products are free ($) but can cost you time and money to research the methods.
    Useful Links:
    http://www.fdftoolkit.net/
    Message was edited by: NKOWA

  • I have 2 member ID's I need to merge them

    Hello,
    please I really need to merge my 2 member ID's because I have 2 reward certificates and I can not use them...thx
    How can I merge them????

    Hello carloscastello,
    Welcome to the Best Buy forum.
    You have come to the right place!  I should have no problem merging your two accounts, as long as they share the same information.  Any points/certificates in the secondary account will transfer over to the primary account following the merge.  Please send me a private message with the information listed below, by clicking on the blue button in my signature, and I will see what I can do to help.
    Name
    Phone #
    Mailing address
    Email address
    Merging My Best Buy™ Accounts
    Thank you for posting and for being a My Best Buy™ member.
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I need to merge two clips

    AHH!! I really need to merge these two clips, the videos just split for no reason and it sounds sorta like heh..heh eeeee
    I REALLY need to fix it A.S.A.P.!!!!!
    Please help!
    Thanks!!!!
    Q.T

    Thanks, but i figured it out.
    I went to "clip" and highlighted the clip i wanted to join to the one ahead and clicked "join clip"
    and they merged
    Thanks anyways!

  • I want to move photos from my laptop to desktop and merge catalogs

    I have Photoshop Elements 5 on my desktop with about 15,000 photos.  Prior to a big trip I bought a laptop and loaded Elements 9 on it. I took about 5,000 pictures on the trip and organized them.  Now I'm back and I want everything from my laptop on my desktop, including my copy of Elements 9.
    I can probably figure out how to get Elements 9 from my laptop to desktop, however I searched the forums and it appears you can't merge catalogs.
    Can anyone recommend the best way to handle my situation?
    What I'm thinking...
    Upgrade my desktop from Elements 5 to Elements 9. 
    Make sure my old Elements 5 catalog on my desktop is converted and functioning in Elements 9.
    Copy all my files from the Laptop to the Desktop
    Import all my files
    Done.
    The only problem is I will lose all the organization I did on my laptop!  I don't want that.
    Thanks!

    I think its the best solution to write tags and all in photographs.... and get them back on import...
    Here is one article about the simple case of migrating from one machine to other..: http://photoshopelementsbyadobe.blogspot.com/2010/06/how-to-transfer-your.html
    There is no easy solution to catalog merging and one needs to look for solutions as suggested in last reply

Maybe you are looking for