Help Needed to stop Jobs

Hi,
I want to stop some jobs which are running in Oracle. I used dbms_job.remove and jobs are removed from dba_jobs table. But how to stop these jobs from running queue.
So can any one please let me know the way to stop th jobs.
Thank you

Hi,
In DBMS_JOBS_RUNNING you can find the sid of the session.
Use this sid to identify the session in v$session and kill the session with:
'alter system kill session 'sid,serial#';'
Don't forget to mark the job as broken or remove it from the job queue.
OR
Before 10g, if you want to stop all jobs, you can simply set JOB_QUEUE_PROCESSES to zero.
In 10g, Oracle intrduced scheduler_job with many advanced features.
In this post I do not want to deal with different features of scheduler_jobs.
In 10g, it is possible to schedule job either in dba_jobs or dba_scheduler_jobs.
Setting JOB_QUEUE_PROCESSES to zero stops only jobs in dba_jobs which means that jobs in scheduler are still running .
In order to disable jobs in dba_scheduler_job, the following script should be run for each job in scheduler.
BEGIN
sys.dbms_scheduler.disable( '"schema?"."job name?"' );
END;
Regards,
Tom
http://asktom.cz

Similar Messages

Help needed to STOP xml loading

Hi there,
I'm pretty new to the action script side of things, have had some help on here already and have also been pulled up for asking for too much help.
Well I'm kind of getting the hang of it now, but am having one major problem with the site I'm making, basically I've been following a tutorial for an xml based website, just about got my head round it but I need one line of code to stop the xml movie clip playing when I load a new one (eg when you navigate to a new page.
this is the current code, if anyone can help I'd be massively thankful, this project has been doing my head in for weeks now - fingers crossed folks D
// onLoad XML function
function loadXML(success) {
if (success) {
// If the XML loads successfully, count how many projects there are in the file.
_root.projectCount = this.firstChild.childNodes.length; // PROJECT node in XML file
// Then run a function that builds arrays out of the XML data.
SS_Arrays();
} else {
// If the xml data did not load, show message on stage by populating the description field.
_root.description = "Error: Could not load XML";
function SS_Arrays() {
for (var count = 0; count < _root.projectCount; count++) {
var nodeObj = objXML.firstChild.childNodes[count];
namesArray[count] = nodeObj.attributes.name;
descriptionsArray[count] = nodeObj.attributes.description;
linksArray[count] = nodeObj.attributes.link;
filesArray[count] = nodeObj.attributes.file;
// run the function to create the thumbnail and list view buttons
SS_createButtons();
function SS_createButtons() {
// First of all we want to hide the master button on the stage (btn_projects_main)
// because we'll be making duplicates of it in the next part of the function
_root.btn_projects_main._visible = 0;
// Work out the X and Y positions of the main button so our new buttons start in the same place
// (Which means where ever you position the main button is where the navigation will start).
btn_xPos = _root.btn_projects_main._x;
btn_yPos = _root.btn_projects_main._y;
// Set the distances between your buttons and the number of rows
btn_xDistance = 140;
btn_yDistance = 19;
btn_numOfRows = 5;
// This figure is used to work out when to start a new column of buttons
btn_yMax = btn_yPos + ((btn_numOfRows - 1) * btn_yDistance);
// Loop through the projects array and create a button for each one by duplicating the original.
for (count = 0; count < _root.projectCount; count++) {
duplicateMovieClip(_root.btn_projects_main, "btn_projects" + count, count);
// As the button is created, set it's X, Y & text properties
_root["btn_projects" + count]._x = btn_xPos;
_root["btn_projects" + count]._y = btn_yPos;
_root["btn_projects" + count].text = namesArray[count];
// set the X position for the next button
if(btn_yPos == btn_yMax){
// if the last buttons was the last row in the column (based on it's Y position) then start a new column
// by resetting the Y position and adding 140px (btn_xDistance) to the the X position.
btn_xPos = btn_xPos + btn_xDistance;
btn_yPos = _root.btn_projects_main._y;
} else {
// if it's not the last one in a row, simply move it along the Y axis.
btn_yPos = btn_yPos + btn_yDistance;
// Load the first project (number 0) to avoid an empty screen
SS_load_project(0);
// Make the first project button highlighted
tellTarget(_root.btn_projects0){
gotoAndPlay(3);
// Set the current button variable so we know which button to switch off when another one is pressed
_root.curButton = "0";
function SS_load_project(arrayNumber){

Hi,
In DBMS_JOBS_RUNNING you can find the sid of the session.
Use this sid to identify the session in v$session and kill the session with:
'alter system kill session 'sid,serial#';'
Don't forget to mark the job as broken or remove it from the job queue.
OR
Before 10g, if you want to stop all jobs, you can simply set JOB_QUEUE_PROCESSES to zero.
In 10g, Oracle intrduced scheduler_job with many advanced features.
In this post I do not want to deal with different features of scheduler_jobs.
In 10g, it is possible to schedule job either in dba_jobs or dba_scheduler_jobs.
Setting JOB_QUEUE_PROCESSES to zero stops only jobs in dba_jobs which means that jobs in scheduler are still running .
In order to disable jobs in dba_scheduler_job, the following script should be run for each job in scheduler.
BEGIN
sys.dbms_scheduler.disable( '"schema?"."job name?"' );
END;
Regards,
Tom
http://asktom.cz

Help needed in backgroung job problem ?

Hi All,
I scheduled VF31 txn in a background to email the invoices. Now the problem is, when suppose,
if i have 10 invoices and the third invoice doesnt have an mail address....job gets failed..
what i need is even if the third invoice fails i want the job to continued with the fourth invoice.
can anyone help me in this regard.
Thanks.

> I scheduled VF31 txn in a background to email the invoices. Now the problem is, when suppose,
> if i have 10 invoices and the third invoice doesnt have an mail address....job gets failed..
> what i need is even if the third invoice fails i want the job to continued with the fourth invoice.
> can anyone help me in this regard.
This means you are may be standard SAP is issuing the error messag when there is no email id on the invoice. Please have a look at the print program for the output type and make sure dont issue any error message if there is no email id.

Help needed to stop Flash stuffing up with firefox

I am getting the "Shockwave flash may be busy or it may have stopped responding. You can stop the plugin now or you can continue to see if the plugin will complete. "
It is a most frustrating error as neither the Continue or Stop options help at all.
I have searched on the error and all I find is that lots of others have the same problem and it is driving them crazy too. Any suggested fixes seem to be either a technical work-around that may be more of a problem in the long-term or don't seem to work. I'm not a tech person but I've been able to sort out most similar problems in the past.
I'm using Firefox 21.0 with Shockwave Flash 11.7.700.202 on Windows 7.
I don't know where to turn to for help.

Please take a look at this post for details on what we'll need to investigate:
How do I report a Flash Player crash to Adobe?
You can either create a bug or post back with the information in a forum reply. In addition, please make sure you include your 5 most recent report ID links found when you visit the "about:crashes" page in Firefox's address bar.

I need help, I sent a job to my eprint address and it did not print

I need help, I send two jobs to my eprint address and it didn't print, nor does not even show that it even got the job. I sent it from both of the e-mails that I have set up for it to except. Can someone please let me know what I am doing wrong. By the way my printer is a HP photosmart premium fax series C410A AIO. Thanks for your help in helping me resolve this matter, Mitzi,{Personal Information Removed}

Hey mitzidg!
Has ePrint been working for you in the past? If so, try power cycling your printer (unplugging it for about 30 seconds and then plugging it back in.) If you are still having a problem, try waiting a few hours and then trying again. Occasionally we are doing updates on the ePrint servers that can cause delays.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

So i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button. it turned white and i tried charging it when it died but it went back to usual please help!

so i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button at the same time for it to restart. It started turning on with the apple symbol and then the screen went white. I kept trying to do the same thing but it wouldnt work. Eace time i did that the screen was a different color. I was yellow/white at one point, blue at another time and sometimes the color behind the apple symbol. It got really HOT and i just let it die. When it was dead i put it on a charger. once it got charged up it started turning on with the apple symbol. then it turned white again and then restarted without me touching anything. When it restarted it turned the blue again. i took it off the charger immediantly because i didnt want it getting as hot as it was before. ive tried every way i know how to fix it but not putting it in the computer because i dont want it to ruin the computer. Please help because i really dont want to get a new ipod. Ive read a lot about how to fix it here on apple but there all the same answer and it still doesnt work. Please respond ASAP! thank you! i could really use your help right now!

First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

SMW2 - Inbound , need to set STOP jobs to automatically delete

Hi
We set the system to receive data from ECC 6.0 system to SRM to inbound queue (SMQ2). There was specific data that we needed for processing and the other set to STOP in SMQ2. The ones that are in the QUEUE are holding back the the active one. We have to delete the STOP jobs to for the active one to process. Is there a way of setting a schedule for STOP job to automatically delete
Regards
Naziem Mahomed

usually a queue is stopped , if there is any problem.
You need to resolve the problem in the queue , and then once that is resolved... ,following queues will go through.
how ever it is not possible to automatially remove the stop queues , unless you have custom program to remove the stopped entries...

HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry

Guys i need to get m itunes account unlocked its stopping mefor making in app purchases please help need to make a purchase within 30 minutes

guys i need to get my itunes account unlocked its stopping mefor making in app purchases please help need to make a purchase within 30 minutes

If you've tried to buy something and your've been charged for it (and it's not a temporary store holding charge) but haven't received it then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

AWT start/stop bundle buttons Help needed.

Hello,
I need help getting start/stop buttons on my AWT Class to take the action of methods from an other class. I will give anybody who can figure this out ALL OF MY Duke Dollars. (I shortend it up to the important stuff so that there isn't too much to read):
MY PROBLEM: I need to have my Gui user interface to start up first. Then when somebody clicks the Gui class "start" button, it will call the start method of my Activator class and similiarly for the "stop" button. When I run the program, it starts up already in "start" mode. It should start up without getting the service (stop mode) and then get it once "start" is pressed" Hopefully somebody can help me figure this out.
First, I have the following AWT class
public class Gui extends Frame{
      Frame f;
      MyImage imagePanel;
      Button button_start;
      Button button_stop;
      Label statusBar;
      Panel btns;
    public Gui() {
        addWindowListener(new WinClosing());
        setLayout(new BorderLayout());
        imagePanel = new MyImage();
        btns = new Panel();
        button_start = new Button("START");
        button_stop = new Button("STOP");
        btns.add(button_start);
        btns.add(button_stop);
        add("North", btns);
        add("Center",imagePanel);
        button_start.addActionListener(new ActionListener(){
            public void actionPerformed( ActionEvent e ){
                imagePanel.getImage();
        button_stop.addActionListener(new ActionListener(){
            public void actionPerformed( ActionEvent e ){
            imagePanel.closeImage();}
        });          }Then I have the Activator class:
public class Activator implements BundleActivator {
     public ServiceReference reference;
     public void start(BundleContext bc) {
         reference = bc.getServiceReference(GpsService.SERVICE_NAME);
         if (reference == null) {
         System.out.println("User could not get a service.");
          } else {
         AnyService anything = (AnyService) bc.getService(reference);
                UserClass user = new UserClass();
                user.startup(anything);
public void stop(BundleContext bc) {
    if (reference != null) {
    bc.ungetService(reference);
    reference = null;
    System.out.println("User has released its Service.");
    } }}Then this previous class calls the startup method for this class:
public class Driver {
        public void startup(AnyService any){
        double any = any.getValue();
        System.out.println(any);
        Gui g = new Gui(any);
        g.setSize(714, 480);
        g.setVisible(true);
      }}Thanks in advance!

Hmm, it's quite hard to imagine what's going on without the code for MyImage. However, I guess you need to add an ActionListener to your two buttons. Are you sure you need two buttons, though? Presumably you can't stop until you've started and vice versa?
private Activator activator;
private Button startButton;
private Button stopButton
public Gui()
startButton = new Button("Start");
stopButton = new Button("Stop");
stopButton.setEnabled(false);
startButton.addActionListener(new ActionListener()
    public void actionPerformed(ActionEvent e)
      start();
stopButton.addActionListener(new ActionListener()
    public void actionPerformed(ActionEvent e)
      stop();
private synchronized void start()
// Construct the Activator when we need it
if(activator == null)
    activator = new Activator();
activator.start(...); // Don't know where you get your BundleContext from!
startButton.setEnabled(false);
stopButton.setEnabled(true);
private synchronized void stop()
activator.stop(...); // Don't know where you get your BundleContext from!
startButton.setEnabled(true);
stopButton.setEnabled(false);
}I'm assuming here that once the Activator is "started" is stays started until it is told to stop, ie, it doesn't stop itself after a finite amount of time.
Hope this helps.

HT204088 I need to stop a double download/purchase of Sons of Anarchy Series 2... HELP! no one to call, email support non existent... stuck at airport with 2 downlaods happening

I need to stop a double download/purchase of Sons of Anarchy Series 2... HELP! no one to call, email support non existent... stuck at airport with 2 downlaods happening

Contact iTunes support:
http://www.apple.com/support/itunes/contact/
They usually respond within 24 hours.

Query help needed for querybuilder to use with lcm cli

Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
Missy

Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy

Help needed in constructing a tree

Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
Please suggest me how to add the arrays to second column for parent and child nodes.
Solved!
Go to Solution.
Attachments:
Tree_fix.vi ‏15 KB

The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Help Needed to stop Jobs

Similar Messages

Maybe you are looking for