HELP networking & file shareing with FCP!

Greetings! I am producing/editing a low budget (low level of experience) documentary and I'm trying to build a network where multiple users can edit off of a single hard drive array. Currently, we have a two Lacie firewire drives (1.5 TB in total) connected to a G5 via fw 800, connected to a 1GB switch via cat 6, then connected to multiple G4s.
We have tried using OSX's built in networking devices, and additionally have tried using NFS via a Linux server. Both attempts were unsuccessful for the multiple G4s. We can load the project (at a painfully slow rate), and play a clip, but after only a few seconds, we get dropped frames.
Can anybody help networking FCP to multiple workstations via a 1GB CAT 6 Network? Fibre is currently not in the budget.
Does anybody know the "fastest" way to make a G5 function as a server?
Thank you!

After hours upon hours of playing around with my 1GB ethernet, I WAS able to get it to work! It has to do with the way final cut manages it's project file.
The solution was to copy the project file off of the master computer onto the terminals, and reconnect the media from there. Previously I had been importing the clips, or using a project file already on a terminal... etc.
Last night I had 3 different computers running (one of them on 10/100) sequences off the same media with no problems.
Thanks for the reply!
J

Similar Messages

FCE file sharing with FCP...?

I am considering purchasing FCE (and a macbook pro), but need to know a few things from users who have experience with it. First, is FCE totally compatible in terms of file sharing with FCP? I'm a beginer and need to learn editing. I just completed production on a film. My editor, who is also my filmmaking partner has FCP with all the bells and whistles. I live in California, he lives in Georgia. I'm hoping to supplement the editing process as we begin putting the film together from opposite sides of the country. Will I be able to do so with FCE, or will there be a problem opening certain filters and plugins from FCP?
Also I was wondering, if I do purchase FCE will I get an upgrade price break when and if I move up to FCP?
Any help and advice would be mucho appreciated. Thanks

Hi
Exactly as Tom writes.
But there are some tools in FCP that are that great that they could justify for
taking the full step.
Colorcorrecting - three ways (not to mention the extra program Color™)
MultiCamera editing - This to be able to edit as real life all Cameras at once
and You even don't need to be anything like precise - only adjust a second or two
afterwards.
A two Camera one hour documentation used to take about 10 to edit in FCE FOR ME
and I've done same in FCP in about 1 hour 20 minutes.
It was mind blowing.
But there is a price-tag I know it hurts and an upgrade program would benefit
the Apple brand (as they usually does)
Yours Bengt W

Networking ~ File Sharing With Windows Vista

Alright, I've browsed enough of the web and I've tried a lot to try and resolve this issue, but none of it has worked at all for me. Here's my scenario about as specific as it gets:
I have a home private network consisting of two Windows Vista PCs, a HP Photosmart Printer, a MacBook Pro running OS X 10.9.1, and an iPhone 5 running iOS 7.0.4. The network is routed through a Medialink MWN-WAPR300N router connected to a Time Warner Cable modem which goes to the Internet. My primary PC, the MacBook Pro, and the iPhone 5 all connect wirelessly; the other PC and printer connects via Ethernet. All devices connect to the Internet flawlessly, and they are all assigned a static LAN IP address through the router because I portforward to one of my PCs, and the router requires it. The network was originally configured using one of the PCs as a Private network under the default workgroup, "WORKGROUP". Everything else router-specific is automatic.
Here's the problem: My MacBook and my primary PC do not communicate over the network at all. Both the MacBook and my primary PC can file share with the other PC connected via Ethernet, and they can both print just fine. After using LAN Scan v1.02 by Nutec Apps, LLC on my iPhone however, neither my primary PC nor the MacBook Pro shows up on the list of LAN devices. But that's not all, the MacBook Pro always recognizes the other PC via Ethernet in Finder, and the MacBook Pro can be found in both PC's Network list. However, when I try to connect to it via my primary PC, it says that "[My MacBook] is not a valid host name." What?
To futher satisfy my curious mind, I set up a small Peer-to-Peer network between my primary PC and the MacBook Pro via Ethernet. Both devices instantly recognized each other and connected without any issues. I was able to transfer files at approximately 100mb/s and I was stoked. I then disconnected and tried to transfer over the network again, and there was nothing there. I have even done ping tests over the network to the MacBook Pro's LAN IP address, and it came back with no response.
I've restarted both computers numerous times, played around with file sharing settings, set appropriate sharing permissions, disabled firewalls, enabled sharing for Windows on the MacBook Pro, enabled file sharing on the Windows PC, you name it. I'm sure there is a small fix that I may have overlooked, but I cannot figure out what the problem is for the life of me. Because the operation worked via Ethernet, and it's working wireless-to-Ethernet, but not wireless-to-wireless, I have a feeling that the problem is related to one or both of the wireless configurations.
Thanks in advance for any help provided, if there is anything I missed I will be happy to proivde more details per request. This issues has been bugging me for weeks now and it's time I seeked professional help

Alright, I am still having the problem and I have the results of the ifconfig command if it will be of any help to any Apple techies out there:
ifLast login: Sun Dec 22 11:56:27 on console
Cav-Mac:~ Drew$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
          options=3<RXCSUM,TXCSUM>
          inet6 ::1 prefixlen 128
          inet 127.0.0.1 netmask 0xff000000
          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
          nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
          options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING>
          ether c4:2c:03:29:e6:f5
          nd6 options=1<PERFORMNUD>
          media: autoselect (none)
          status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          ether 78:ca:39:af:ce:5b
          inet6 fe80::7aca:39ff:feaf:ce5b%en1 prefixlen 64 scopeid 0x5
          inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255
          nd6 options=1<PERFORMNUD>
          media: autoselect
          status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
          lladdr 60:33:4b:ff:fe:9b:82:10
          nd6 options=1<PERFORMNUD>
          media: autoselect <full-duplex>
          status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
          ether 0a:ca:39:af:ce:5b
          media: autoselect
          status: inactive
bridge100: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=3<RXCSUM,TXCSUM>
          ether c6:2c:03:92:9b:64
          inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
          Configuration:
                    id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
                    maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
                    root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
                    ipfilter disabled flags 0x2
          member: en0 flags=3<LEARNING,DISCOVER>
                  ifmaxaddr 0 port 4 priority 0 path cost 0
          media: <unknown type>
          status: inactive
Cav-Mac:~ Drew$
The section in question is where it says bridge100 because the IP address listed under that section reads 192.168.2.1, as previously suggested. However another IP address is listed above it as 192.168.1.104, which is exactly what it should be as I have it assigned via DHCP in the router. Any suggestions would be greatly appreciated, because this is driving me crazy.
PS: I apologize for the confusion. I made a typo in my previous post about my MacBook's LAN IP address. It should be 192.168.1.104, not 103. I can confirm that it is listed as *.104 in my router and it shows *.104 on the above ifconfig. Please ignore the *.103, thanks

Help using file sharing with different users accounts on same Macbook

Hi, I just wanted a little help using the file sharing option. My wife and I had different users accounts on the same MacBook, but when I am trying to share my baby's picture from my documents folder for my wife to have the same picture, I can't find the way to do that; I am not been able to find my pictures on my wife's account. Is there any way that I could share a folder from my account and my wife to have the same files at the same time on her account?
I mean, something like the smart play list on the itunes?
Thank you

You can't do that directly unless you change permissions on your whole Documents folder which is not a good idea. Your wife can see your Documents folder from her account by going to Users/yourusername/Documents. However, this folder has no read privileges for others except yourself by default so she won't be able to open it.
rather than changing permissions on your Documents folder, you can place the pictures you want to share in Public folder in your home directory or in Users/Shared folder.

Network file sharing in Lion

I have some folders shared in Mac OS that was easily available to my other computers in network and guest OSs installed on virtual machine on Mac OS host but since I've upgraded to Lion sharing stoped to work "normally". I still can see my mac machine in network group but it no longer allow to connect as a "Guest", so I can only explore my shared folders having entered my Mac OS user login and password but doing that I get an access not only to shared folders but to the entire mac drive and all subfolders... How can I fix that and is it possible to use network file sharing in Lion as it was in SL and previously?

Hi Prashanth,
There are multiple ways to move content from fileShares to SharePoint.
Step 1: Create the SharePoint Information Architecture - create a site collection preferably chose a document center template, create document libraries and folders as per the network folder structure in your organization.
Step 2: Map your File Share as Network drive in your client machine, and same way map your SharePoint website document library as network drive too. Drag and drop files.
Note there are 2 issues for this approach,
1) your document metadata will be lost, the last modified by will change to the account with which you have logged into SharePoint while copying, and the last modified time will be changed.
2) Its a tedious manual approach if you have lots of files.
Now for retaining the metadata you will need to depend upon a 3rd party tools ( or this codeplex solution: http://f2sp.codeplex.com/ (I havent verified that this works with Sp 2013 or not).
Using 3rd party tools has the advantage of retaining metadata and any issues with file naming conventions will also be taken care of most of the prominent tools which otherwise needs to be taken care by administrator manually. - Note SharePoint has file
naming conventions - https://support2.microsoft.com/kb/905231?wa=wsignin1.0.
Also In order to reduce the effort in second step you can also create content organizer rules and map your drop off library as the drag and drop location.
finally do read this awesome blog post by Sean Earp and Andre Kieft before starting of with the project. http://blogs.technet.com/b/ptsblog/archive/2013/11/04/migrating-file-shares-to-sharepoint-online.aspx
Hope that helps.

File sharing with multiple users on one Mac

I have two Macs, both of which ca seen each other across the network. My question regards file sharing with multiple users on the same computer. When file sharing, are the files from all users available across the network, or just those of the user presently logged in? The issue is that I am trying to access files from a user who isn't currently logged in, but another user on that computer is. I need to get into that person's documents, but I don't see a way to navigate to their documents folder.

Right, I got that. But the computer is in constant use by User A, while I need access to User B's files. I could need access at anytime, and it would be a pain to make User A log off and log in as User B everytime. I was just wondering if there is anyway to access User B's files in this situation, without logging User B in.

File sharing with accounts

I currently have my TC configured for file sharing with a disk password. Lately, however, I find that I have a need to be able to restrict read/write access to certain folders and files based on the user. But, when I select File Sharing "With Accounts" from the drop down I get a warning message stating "Setting up user accounts will make any files already on AirPort disks inaccessible." Seems like a pretty vague warning considering the possible outcome!
Does this mean I will lose access to all existing files already on the TC disk permanently, or just until I configure the accounts with access?
Thanks for any insight.
- Don

Is the file sharing the same between the TC and the AirPort Extreme 802.11n (Gigabit Ethernet) with a USB2 connected disk?
My experience is that the network share of the shared disk is different, but no files get lost. One can move between the security mechanisms without losing data. YMMV.
Here are my findings in detail: I was using the shared disk "With a Disk Password". When connecting from a Mac, a single share called like the partition of the disk would automatically mount. On that disk I put some folders "Music" and "Videos" directly in the root of the mounted share. The same volume also had a backup copy of my Mac mini, that I did when it was still locally connected (USB2 directly to the mini) rather than via Disk sharing. From that time there is still a "Users" folders there. One important folder is called "Shared". All folders and their files are accessible.
"Volumename" (share)
- Music
- Photos
- Videos
- Shared
- Users
When I changed from "With a disk password" to "With accounts", I also get the warning about "...will make any files already on AirPort disks inaccessible".
After the change, I have no access to "Music", "Photos" or "Videos" anymore.
However, there is still the share called "Volumename", but now it points to the sub folder "Shared" !!!!
When connecting from either Windows or Mac I see two shares. One called "Volumename" and the other matching the user name. I think the user share actually points to /users/username.
When switching back to "With a disk password", all is like it was before - no files are lost, the "Music", "Photos" and "Videos" folders stay there, and so does all their content.
I will now try to move them into the "Shared" folder, so that the share content after switching to Secure Shared Disk "With Accounts" will look the same as the content looked until now.
Comments?

Macs and file sharing with Panasonic Lumix TS5

I'm trying to set up this camera to send my photos wirelessly to my IMAC but have hit a brick wall. The instructions with the camera state wifi sharing is supported with OS X 10.4 to 10.8, and I am running 10.75. The instructions are simple: find the file and enable sharing. I've completed all the steps, and my camera finds my Imac fine, but then cannot find the shared folder.
I researched this and found that for a different Panasonic camera, despite what panasonic says, file sharing did not work for mac only environments. (http://www.dpreview.com/forums/thread/3360154). I have contacted panasonic, and am beginning to believe the this is true for my camera as well. I explained my problem and she first recommended to sign up for a lumix account. Then it went from here:
Kerry-Ann W.: In the setup it states where a lumix club account is required to send images to lumix club cloud
Dave: Ok, do I understand correctly that I needed a lumix club account to transfer images wirelessly to my IMAC?
Kerry-Ann W.: No I am not saying that. There is some sharing settings that needs to be set on your computer. We recommend that you contact apple so they can assist you in adjusting those settings.
Dave: Ok, I've signed up for a lumix club account. Will that help me transfer my images to the mac?
Kerry-Ann W.: We recommend that you contact apple so they can assist you in adjusting the sharing settings on your IMAC.
Dave: Kerry-Ann, please help me. I've done exactly what the Lumix manual tells me to do with my mac and it's not working. You are supposed to help when the manual doesn't suffice. Isn't there any tips you can give me to try and make this work?
Kerry-Ann W.: That is correct and based on checks done if it is not seeing your folders that means there needs to be some settings done on your computer for it to see the folders and if that is not done then you will not be able to see the folders.
Dave: Ok, so will you help me get those settings done on my computer?
Kerry-Ann W.: We recommend that you contact apple so they can assist you in adjusting those settings.
I have no idea what settings she is referring to, and she offered no guidance at all. Has anyone had any success file sharing with panasonic cameras? Or has anyone else concluded this is hopeless?
Thank you,
Dave

I have run through 2 of these cameras (1st one died-Epic Panasonic Fail) and I'm stoked I found the easy fix. No thanks to PaniCsonic.
Connect your camera via USB to your MacBook. Don't worry that it won't show.
Go to System Preferences under the 'Apple' icon (top left corner for any newbies)
Select the 'Sharing' tab/folder (should be yellow diamond with a person walking to YOUR left direction)
Select 'Internet Sharing'
A sub menu 'To computers using' will open up to the right with 3 boxes/options:
1) Firewire
2) Ethernet
3) Bluetooth PAN
Select Bluetooth PAN box so it check marks as selected.
Click the 'Internet Sharing' box.
Select 'Start' when the prompt asks if you are sure you want to turn on Internet sharing.
The 'Internet Sharing' box will then select.
Your camera will then prompt you to select a USB mode. Select 'PC'.
Wait through the access mode and VOILA, your photos will be uploaded straight to iPhoto as they should do in the first place.
I like the camera for it's simplistic functionality. I had a slick Olympus underwater that had the same features, but was more time in navigating through them all. I don't like PaniCsonic for their poor foresight in making this camera an austosetup feature for Mac users. My iPhone didn't like it much either.
Nonethless, there's the fix. For/from me.

Osx 10.5.8 can not file sharing with Canon IR 5020i copier/printer/scanner

this mac networked other window computers(vista), the canon ir 5020i is file sharing(scanning and save the documents) with vistas.
All computers are same "Work Group" and this mac can print out to the canon ir 5020i.
i can see(open and delete) the files of the mac from vista computers.
how can i get a file sharing with this mac?
Thanks in advance.

Try the Leopard forums. These are for Snow Leopard.

E4200 Slow Wireless download and Network File Sharing

When I first got the E4200 up and running I was able to transfer files from my wireless laptop to a wired laptop at speeds of over 2 MBps(distance was over 40 ft). Now I have both laptops running wireless and a desktop that is wired via ethernet to the 4200 router and network file sharing runs much slower. Right now network transfer speeds are around 500-550 kBps.
Wireless network speeds are being affected also. Wi-fi d/l speeds via Cisco speed test is usually 5-6x slower than my wired speed tests, with upload speeds being faster than the d/l speed(Laptop is only 2 feet away from router for testing). And sometimes the wireless d/l speeds will slow down all the way to .15 mbps.
Has anyone come across this problem and found a fix for it, or have some suggestions? The router settings are mostly default and I have reset it to factory defaults via web interface and tried power cycling. But nothing so far has worked. I would hate to have to return this router and go back to the wrt54g.

Ok, well I tried all these and changing the MTU down to 1365 made it run real slow, so I found out the optimal mtu and switched between auto and manual 1500, and auto gave me more consistent speeds. It does seem to be running a bit faster with the name change of the 5 ghz band, and changing the channel of the 2.4 ghz band(Name changing 2.4 band did not make any noticable differences).
Right now I am getting download speeds around 10 mbps on the vista laptop(wireless), while the windows 7 desktop(wired) and laptop(wireless) are usually around 5.3-6 mbps. File sharing between the windows 7 machines are 4.3 MBps and 2.9 MBps between vista laptop and W7 desktop. Upload speeds on all machines are around 7mbps.
I am happier with the more consistent speeds between all machines instead of really fast between just 2, but am confused to why the vista laptop is running faster and my upload speed is faster than the download speeds on 2 of my machines.

HT204387 can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce?

can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce? i would like to to stay with Apple iphone but if they dont improve the lack of features.. i will move on and I know im not the only person to think like this.
regards
gavin_p

There is not "fix" to be provided, Apple made a decision to not include the file sharing profile.
You are welcome to provide feedback, but after six years, I would not hold your breath.
Feedback can be left here: http://www.apple.com/feedback/iphone.html

File sharing with PC

Hi,
I'm new to the Mac experience and I'm trying to set-up file sharing with my MacBook and PC and I can't figure it out. I've tried entering the PC's IP address through the Finder - Connect to Server, but I can't get it working.
I would appreciate any suggestions you have to offer! Thanks.

Click here for information, using a Tiger article if needed.
(31792)

Back to My Mac/VNC/Screen and File Sharing with a PC

Ok back to my mac is great but it doesn't work with a pc. What is the best alternative to screen and file sharing with a PC???
Thanks,

Use VNC.
On the PC.
http://www.realvnc.com/products/free/4.1/index.html
On the PocketPC
http://www.windowsfordevices.com/news/NS5673359231.html
Apple's Remote Desktop allows for VNC control through a password.
iFelix

Vista file sharing with OS 10.3.4

Are there known issues with Windows Vista OS connecting and file sharing with Mac OS 10.3.4? We can connect Windows XP with Mac OS 10.3.4, but two Vista machines cannot. Any ideas?

Maybe a lack of support for something the Vista OS uses.
Mac OS 10.3.9 was always mountable and writable from XP. I would set up a folder on a large disk on my MDD (10.3.9) for my wife to connect to with her work laptop running XP, to use as a backup area. Printing was also extremely easy from XP to a USB printer attached to 10.3.9.

Need help setting up a file sharing with VISTA

Hi,
Can somebody help me with setting up a connection to a Windows Vista computer. I followed all the instructions from this forum but still it doesn't work.
Here is what I'm doing:
1) Sharing -> File Sharing -> enabled
2) Sharing -> Options -> activating SMB
3) Network -> Options -> WINS -> "WORKGROUP"
4) Network -> Options -> 802.1X -> activating 802.1X
Under Sharing I see a lable which tells me that Windows user can access my computer via the address smb://x.x.x.x
In Windows this address doesn't work and I cannot see my Mac computer nor can I see the windows computer on the mac.
It worked so well with TIGER.
Do you have set the DHCP to automatic address on both, Mac and windows or do you use a static ip address?

In windows when you do "map network drive" you need to enter "\\server\share" (without quotes).
In Vista, go to the Windows Button > Computer. The "map network drive" option is in the bar in the top of the window. You may need to enlarge the window or click on the little expand arrow to see it.
smb://server is used when you're connecting to a windows share from the MacOS.

HELP networking & file shareing with FCP!

Similar Messages

Maybe you are looking for