Help on custom actionscript component

Hi All,
I need to create a dynamic form which has multiple pages each
page will be displayed in separate tabs and has individual
controls. On submit of a a button i need to trace the data entered
in the controls for each Tab. The numer of Tabs and controls will
vary depending on criteria (reading from an XML).
Sample xml data below -
<Tab tabid="App_Form_01_Tab_02" name="Tab 2"
label="Product Information" taborder="2">
<Section sectionid="App_Form_01_Tab_02_Sec_01"
name="Contract" orderontab="1">
<Attrtype name="SingleLineofText" defval="This is single
line text" maxchar="35" maxlines="1" inputtype="TextInput"
attrlabel="Attribute 1"></Attrtype>
<Attrtype name="MultipleLinesofText" defval="This is
multi line text" maxchar="" maxlines="4" inputtype="TextArea"
attrlabel="Attribute 2"></Attrtype>
</Section>
</Tab>
<Tab tabid="App_Form_01_Tab_03" name="Tab 2" label="New
Tab" taborder="3">
<Section sectionid="App_Form_01_Tab_02_Sec_01"
name="Contract" orderontab="1">
<Attrtype name="SingleLineofText" defval="This is single
line text" maxchar="35" maxlines="1" inputtype="TextInput"
attrlabel="Attribute 1"></Attrtype>
</Section>
</Tab>
I tried developing the above UI by creating custom
actionscript components by extending existing UI components such as
TabNavigator/VBox and added children at each stage until I reached
the actual form control info using which I am creating the
controls.
So the child creation is following -
MyTabnavigator->MySectionTabs(VBox)->MySections(VBox)->MySectionAttributes(HBox)->TextInp ut
I have instantiated the MyTabNavigator comp from the mxml
using <MyTabNavigator/> tag. This is displaing the dynamic
form the way I need but now I have to access the text value entered
into the TextInput. I tried to access the TextInput from a method
written within a script block in the main application mxml. I am
not able to do that.
Could anyone please advise me on this.
Test Link -
http://dev.eforceglobal.com/test/paromita/bin/TestActionscriptComps.html
(this also has the sample view source code)
Am I doing this the wrong way?
Please help.
Regards,
Paromita.

Since you're using a scrollpane you should simply limit the dimensions of the visible part (JViewPort).
yourScrollPane.getViewport().setPreferredSize(.......);

Similar Messages

Custom ActionScript Component icon in Design View

Hi,
I have created a custom ActionScript component in Flex. I have added the Icon metadata tag before the class definition:
[IconFile("expandable-panel.png")]
public class ExpandablePanel extends TitleWindow
However, though the path to the image is correct, the icon for the custom component does not show up in Design View.
Any idea ?
Thanks.
Best regards,
Karl Sigiscar.

Not very helpful. My question is more where should the icon be placed or what kind of extra configuration is required so that Flex Builder / Flash Builder can find it in Design view.
Yeah, yeah, I'm in the wrong forum. Doh.

Need help on customizing a component

HI,
I need to retrieve LDAP users,
Ther's no way to retrieve an LDAP user from the content Server unless he has already log on the server.
So I've created a java class using JNDI that can retrieve the users from the LDAP Server. I have already tested it separately, but I don't know how I can integrate this CLASS in a component I've already created.
I'm new to Oracle Content Server ( 3 months )
Someone can help?
Message was edited by:
user631618
Message was edited by:
user631618

this is a simple java class that displays users from an LDAP server.
import java.util.* ;
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.NameClassPair;
import javax.naming.NamingEnumeration;
import javax.naming.InitialContext;
import javax.naming.NamingException;
public class TestLDAP {
public static void main(String[] args) {
Hashtable <Object,Object> env = new Hashtable<Object,Object>();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://msgsrv:389/dc=steriamedshore,dc=com");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "cn=stagiaire3,cn=Users,dc=steriamedshore,dc=com");
env.put(Context.SECURITY_CREDENTIALS, "stagiaire@123");
Context context;
ArrayList v = new ArrayList () ;
try {
context = new InitialContext(env);
NamingEnumeration<NameClassPair> e = context.list("cn=Users");
while (e.hasMore()) {
v.add ( e.next().getName() ) ;
for (int i = 0 ; i<v.size() ; i++)
System.out.print (v.get(i) + "\n") ;
context.close();
} catch (NamingException e) {
System.err.println("Erreur lors de l'acces au serveur LDAP" + e);
e.printStackTrace();
System.out.println("fin des traitements");
thanks for help :)

Custom Actionscript component

I have created a custom component that extends the canvas
class. This component is created dynamically and then dragged in to
position by the user. Flexbuilder shows an error on the highlighted
lines that set the new x and y coordinates that says "1059:
Property is read-only". How do I give my component x,y capability?
Custom Component Code:
package components
import flash.display.DisplayObject;
import flash.events.Event;
import flash.events.MouseEvent;
import mx.containers.Canvas;
import mx.controls.TextArea;
import mx.events.FlexEvent;
public class TextPanel extends Canvas
public function TextPanel()
super();
addEventListener(FlexEvent.CREATION_COMPLETE,
creationCompleteHandler);
private function creationCompleteHandler(event:Event):void
// Add the resizing event handler.
addEventListener(MouseEvent.MOUSE_DOWN, resizeHandler);
private var xOff:Number;
private var yOff:Number;
override protected function createChildren():void
super.createChildren();
var myTA:TextArea = new TextArea;
myTA.x = 1;
myTA.y = 1;
myTA.width = width - 2;
myTA.height = height - 8;
addChild(DisplayObject(myTA));
override protected function
updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
super.updateDisplayList(unscaledWidth, unscaledHeight);
graphics.clear()
graphics.lineStyle(2);
graphics.moveTo(unscaledWidth - 6, unscaledHeight - 1)
graphics.curveTo(unscaledWidth - 3, unscaledHeight - 3,
unscaledWidth - 1, unscaledHeight - 6);
graphics.moveTo(unscaledWidth - 6, unscaledHeight - 4)
graphics.curveTo(unscaledWidth - 5, unscaledHeight - 5,
unscaledWidth - 4, unscaledHeight - 6);
// Resize panel event handler.
private var origWidth:int;
private var origHeight:int;
public function resizeHandler(event:MouseEvent):void
// Determine if the mouse pointer is in the lower right 7x7
pixel
// area of the panel. Initiate the resize if so.
// Lower left corner of panel
var lowerLeftX:Number = x + width;
var lowerLeftY:Number = y + height;
// Upper left corner of 7x7 hit area
var upperLeftX:Number = lowerLeftX-7;
var upperLeftY:Number = lowerLeftY-7;
// Mouse positionin Canvas
var panelRelX:Number = event.localX + x;
var panelRelY:Number = event.localY + y;
// See if the mousedown is in the lower right 7x7 pixel area
// of the panel.
if (upperLeftX <= panelRelX && panelRelX <=
lowerLeftX)
if (upperLeftY <= panelRelY && panelRelY <=
lowerLeftY)
event.stopPropagation();
origWidth = width;
origHeight = height;
xOff = parent.mouseX;
yOff = parent.mouseY;
parent.addEventListener(MouseEvent.MOUSE_MOVE, resizePanel);
parent.addEventListener(MouseEvent.MOUSE_UP,
stopResizePanel);
private function resizePanel(event:MouseEvent):void {
//Make sure panel is not sized below minimum width
if ((origWidth + (parent.mouseX - xOff)) > 30){
width = origWidth + (parent.mouseX - xOff);
//Make sure panel is not sized below minimum height
if ((origHeight + (parent.mouseY - yOff)) > 30){
height = origHeight + (parent.mouseY - yOff);
private function stopResizePanel(event:MouseEvent):void {
parent.removeEventListener(MouseEvent.MOUSE_MOVE,
resizePanel);
Instantiate Component:
import components.TextPanel;
private function createTextPanel():void {
var tp:TextPanel = new TextPanel;
tp.width = 200;
tp.height = 100;
var tpDO:DisplayObject = this.addChildAt(DisplayObject(tp),
this.numChildren - 1);
tpDO.x =
this.mouseX = (tpDO.width / 2);
tpDO.y =
this.mouseY = (tpDO.height / 2);
}

Your component extends Canvas sois a UICoonent.
Just do:
var tp:TextPanel = new TextPanel;
this.addChildAt(tp, this.numChildren - 1);

Custom itemRenderer component based on cell value: error 1009

I'm working on an item renderer for a dataGrid that has different states depending on the cell and row values.
The cell value is a toggle (true or null), and sets whether content should be shown in the cell or not
The row properties determine what is shown when the cell value is true.
The dataGrid dataProvider is populated based on user id input.
I created the itemRenderer as a custom actionscript component, closely following this example:
360Flex Sample: Implementing IDropInListItemRenderer to create a reusable itemRenderer
However, my component results in Error #1009 (Cannot access a property or method of a null object reference) when a user id is submitted.
package components
     import mx.containers.VBox;
     import mx.controls.*;     import mx.controls.dataGridClasses.DataGridListData;
     import mx.controls.listClasses.BaseListData;
     import mx.core.*;
     public class toggleCellRenderer extends VBox
          public function ToggleCellRenderer()
          {super();}
          private var _listData:BaseListData;
               private var cellState:String;
               private var cellIcon:Image;
               private var imagePath:String;
               private var imageHeight:int;
               private var qty:String = data.qtyPerTime;
               private var typ:String = data.type;
          public function get listData():BaseListData
               {return _listData;}
          public function set listData(value:BaseListData):void
               {_listData = value;}
          override public function set data(value:Object):void {
               super.data = value;
               if (value != null)
               //errors on next line: Error #1009: Cannot access a property or method of a null object reference.
               {cellState = value[DataGridListData(_listData).dataField]}
          override protected function createChildren():void {
               removeAllChildren();
               if(cellState=='true'){
                    cellIcon = new Image();
                    addChild(cellIcon);
               //there is another state here that adds another child...
          //next overrides commitProperties()...
There are no errors if I don't use an itemRenderer--the cells correctly toggle between "true" and empty when clicked.
I also tried a simple itemRenderer component that disregards the cell value and shows in image based off row data--this works fine without errors or crashing. But I need to tie it to the cell value!
I have very limited experience programming, in Flex or any other language. Any help would be appreciated.

Your assumption that the xml file either loads with "true" or nothing is right.
After modifying the code to the following, I don't get the error, but it's still not reading the cell value correctly.
package components
     import mx.containers.VBox;
     import mx.controls.*;
     import mx.controls.dataGridClasses.DataGridListData;
     import mx.controls.listClasses.BaseListData;
     import mx.core.*;
     public class toggleCellRenderer extends VBox
          public function ToggleCellRenderer()
           super();
          private var _listData:BaseListData;
          private var cellState:Boolean;
          private var cellIcon:Image;
          private var imagePath:String;
          private var imageHeight:int;
          private var qty:String;
          private var typ:String;
           public function get listData():BaseListData
             return _listData;
          override public function set data(value:Object):void {
               cellState = false;
               if (listData && listData is DataGridListData && DataGridListData(listData).dataField != null){
                   super.data = value;
                   if (value[DataGridListData(this.listData).dataField] == "true"){
                       cellState = true;
          override protected function createChildren():void {
               removeAllChildren();
               if(cellState==true){
                    cellIcon = new Image();
                    addChild(cellIcon);
               //there is another state here that adds another child...
          //next overrides commitProperties()...
- didn't set the value of qty or typ in the variable declarations (error 1009 by this too--I removed this before but wanted to point out in case its useful)
- added back in the get listData() function so I could use the listData
- changed the null check
All cells are still returning cellState = false when some are set to true, even if I comment out [if (value[DataGridListData(this.listData).dataField] == "true")] and just have it look for non-null data. That shouldn't make a difference anyway, but it confirms that all cells are returning null value.
Swapping out the first if statement in set data with different variables results in the following:
[if (listData != null)] all cells return null (cellState=false for all)
both [if (value != null)] and [if (DataGridListData != null)] results in error 1009 on a line following the if, so I assume they return non-null values.
All rows have data, just not all fields in all rows, so shouldn't listData be non-null? Could it be that the xml file hasn't fully loaded before the itemRenderer kicks in?
I also realized I had removed the item renderer from many of the columns for testing, and since some columns are hidden by default only one column in the view was using the itemRenderer--hence the single alert per row I was worried about earlier.
Thanks for your help so far.

How to assign search help for custom cost centre field in SRM 7.0

Hi Experts!!
We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
Thanks in advance.
Regards,
Kalyani

kalyani,
i can see your requirement in below way..
as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH INTERFACECONTROLLER
so you can replicate the same functionality for your z field.
but can you clarify one thing.. why are you going for this z field in place of standard field ?

Error while pointing to Custom MSS Component

Hello,
We are implementing MSS on Portal. I have Z copied the standard MSS Webdynpro Component HRMSS_C_CATS_APPR_DASHBRD. To point to the custom one in the Homepage, I have the Custom Component Configuration ZHRMSS_HOMEPAGE_OVP, in which when I refer to the Custom Webdynpro Component created, I get the Error : 'Component <z component name> of UIBB (Window Name) implements an Invalid Interface'.
What can be causing this?
Any help would be highly Appreciated.

Try closing and reopening the project. This is a common issue with Web Dynpro projects and closing and reopening tends to fix it.

How to add properties to a custom JSF component?

Hello, everybody!
I've just developed my first custom JSF component. It's a data pager and it is working pretty well. But now I want to be able to use some of it attributes in my backing beans at runtime. I mean, I want to bind it to component in the JSF page. It already has a binding attribute in the tld file, but I want to be able to accesss two values that the renderer of my custom component calculate inside it, which would relieve me from calculating these values manually in the backing beans. So, I would like to know how to make these values external to the component.
By now this is my custom pager class:
import javax.faces.component.UICommand;
public class UIPaginadorDados extends UICommand
}You can see that it has no logic because all the logic is in the renderer class:
import javax.faces.render.Renderer;
public class PaginadorDadosRenderer extends Renderer
// logic here
}As I said I want to be able to do the following in my backing beans:
private UIPaginadorDados pager = new UIPaginadorDados();
// and later...
pager.getCurrentPage();
pager.getPageCount();In the JSF page:
// I already can do this, because I have a binding attribute
<urca:paginadorDados binding="#{backingBean.pager}" />I suppose that I'll have to create the properties getCurrentPage() and getPageCount() in the component class, UIPaginadorDados, but I don't know how to get the values to the properties from the renderer class. I don't even know if this is how I should do it.
So I would appreciate a lot your help about this subject.
Thank you.
Marcos

Marcos_AntonioPS wrote:
RaymondDeCampo wrote:
I neglected to mention: do not forget to implement the methods in StateHolder to preserve the properties you added to your component.Hello, Raymond. Could you elaborate a little more on that? If you could give a short example, it would be helpful.
MarcosNo problem. I have already found out how.
Thank you very much, Raymond.
Marcos

Custom Pipeline Component stopped changing input filename

Hi
In my project, I have a custom pipeline component to change the input file name. I use it in the receive pipeline decode stage. It was working initially when I had only a receive pipeline and custom pipeline component in my solution. later I introduced
two schemas, an orchestration, map and a send pipeline. The rename is not working anymore. Please help.
receive adapter: FILE
send adapter: FTP
Custom pipeline component: (File Name Setter)
Receive pipeline:
decode: custom pipeline component to rename the filename
disassemble: flatfile disassembler conecting to a document schema
Map:
Schema 1 to Schema 2 (transforms from Windows to Unix format)
Orchestration:
receive message
transform using map above
send message
Exception Handler
Send pipeline:
FlatFile assembler
manibest

May be its not working now, because in the orchestration which you have added,
you’re constructing a new message from the received message and the context properties from the Received message is not copied across to the newly constructed message. So when you use “%SourceFileName%” macro in the send port,
the ReceivedFileName context property is missing in the newly constructed message which is sent out.
So in your Orchestration, while constructing (in MessageAssignment shape) the outbound message from the Received message, copy the context property of the Received message to the newly constructed message. Something like this
//This line copies all the context properties from received message to the outputted message
msgOutputted (*)= msgReceived(*)
//or
//This line just copies the receive file name context property from received message to the outputted message
msgOutputted (FILE.ReceivedFileName)= msgReceived (FILE.ReceivedFileName).
If you’re not using the Orchestration or constructing the new message (even in map), then just add the schemas/orchestration or any pipeline would not affect the ReceiveFileName code. May be in this case, debug the pipeline and also check whether the outputted
message has ReceivedFileName in its context property.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Custom pipeline component creates the folder name to archive messages

Hi
I have an requirement that a BizTalk application is receiving untyped messages and at the receive location the pipeline have to archive the incoming message with the specifications:
suppose I have an xml like
<PurchaseOrder>
<OrderId>1001</OrderId>
<OrderSource>XYZ</OrderSource>
<Code>O01</Code>
</PartyType>
In the pipeline component it has to read this xml and have to use OrderSource value 'XYZ' to create a archival folder and the message have to archive with file name '%MessageId%'
It has to be done by writing custom pipeline component where I am not familiar with c# coding, Can anyone please how to implement mechanism.
Thanks In Advance
Regards
Arun
ArunReddy

Hi Arun,
Use
BizTalk Server Pipeline Component Wizard to create a decode pipeline component for receive. Install this wizard. This shall help you to create the template project for your pipeline component stage.
Use the following code in the Execute method of the pipeline component code. This code archives the file based with name of the file name received.
public Microsoft.BizTalk.Message.Interop.IBaseMessage Execute(Microsoft.BizTalk.Component.Interop.IPipelineContext pc, Microsoft.BizTalk.Message.Interop.IBaseMessage inmsg)
MemoryStream tmpStream = new MemoryStream();
try
string strReceivedFilename = null;
DateTime d = DateTime.Now;
try
//Get the file name
strReceivedFilename = inmsg.Context.Read("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties").ToString();
if (strReceivedFilename.Contains("\\"))
strReceivedFilename = strReceivedFilename.Substring(strReceivedFilename.LastIndexOf("\\") + 1, strReceivedFilename.Length - strReceivedFilename.LastIndexOf("\\") - 1);
catch
strReceivedFilename = System.Guid.NewGuid().ToString();
originalStream = inmsg.BodyPart.GetOriginalDataStream();
int readCount;
byte[] buffer = new byte[1024];
// Copy the entire stream into a tmpStream, so that it can be seakable.
while ((readCount = originalStream.Read(buffer, 0, 1024)) > 0)
tmpStream.Write(buffer, 0, readCount);
tmpStream.Seek(0, SeekOrigin.Begin);
//ToDo for you..
//Access the receive message content using standard XPathReader to access values of OrderSource and construct file pathAccess the receive message content using standard XPathReader to acceess values of OrderSource and contruct the file path
string strFilePath = //Hold the value of the file path with the value of OrderSource
string strCurrentTime = d.ToString("HH_mm_ss.ffffff");
strFilePath += "\\" + strReceivedFilename + "_";
FileStream fileStream = null;
try
System.Threading.Thread.Sleep(1);
fileStream = new FileStream(strFilePath + strCurrentTime + ".dat", FileMode.CreateNew);
catch (System.IO.IOException e)
// Handle the exception, it must be 'File already exists error'
// Wait for 10ms, change the file name and try creating the file again
// If the second 'file create' also fails, it must be a genuine error, it'll be thrown to BTS engine
System.Threading.Thread.Sleep(10);
strCurrentTime = d.ToString("HH_mm_ss.ffffff"); // get current time again
string dtcurrentTime = DateTime.Now.ToString("yyyy-MM-ddHH_mm_ss.ffffff");
fileStream = new FileStream(strFilePath + strCurrentTime + ".dat", FileMode.CreateNew);
while ((readCount = tmpStream.Read(buffer, 0, 1024)) > 0)
fileStream.Write(buffer, 0, readCount);
if (fileStream != null)
fileStream.Close();
fileStream.Dispose();
if (originalStream.CanSeek)
originalStream.Seek(0, SeekOrigin.Begin);
else
ReadOnlySeekableStream seekableStream = new ReadOnlySeekableStream(originalStream);
seekableStream.Position = 0;
inmsg.BodyPart.Data = seekableStream;
tmpStream.Dispose();
catch (Exception ex)
System.Diagnostics.EventLog.WriteEntry("Archive Pipeline Error", string.Format("MessageArchiver failed: {0}", ex.Message));
finally
if (tmpStream != null)
tmpStream.Flush();
tmpStream.Close();
if (originalStream.CanSeek)
originalStream.Seek(0, SeekOrigin.Begin);
return inmsg;
In the above code, you have do a section of code which will access the receive message content using standard XPathReader to access values of OrderSource and construct the file path. I have
commented the place where you have to do the same. You can read the XPathReader about here..http://blogs.msdn.com/b/momalek/archive/2011/12/21/streamed-xpath-extraction-using-hidden-biztalk-class-xpathreader.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to migrate Stellent 7.5.1 custom layout component to OCS 10gR3

Hi,
I am in the process of upgrading stellent 7.5.1 to OCS 10gR3. There is a custom layout component in 7.5.1 wanted to find out how can I migrate the layout component. As probably there are changes in 10gR3 so want to find out how to migrate the custom layout component and any changes required before migrating to 10gR3.
Thanks.

Hi
am putting out the steps needed for upgrading an existing CS instance from version 7.5.1 to 10gR3. Its basically a 2 step process where we use Configuration Migration Utility to migrate the CS structure and Archiver to migrate the existing contents. The steps are as follows :
1. Install a new CS 10gR3 instance on the server and configure it as per the install guide.
2. Verify that the basic functionalities for the newly installed instance is working fine by doing some simple tests like checkin ,checkout , update etc. Then upgrade the CS to the latest patchset level which can be downloaded from http://updates.oracle.com/download/6907073.html.
3. Install the latest version of Configuration Migration Utility component (which is found in the same uprgade patch set ) on both the 10gR3 CS (target) instance and the 7.5.1 CS (source).Enable them on both the CS instances and restart the same.
4. Run the Configuration Migration Utility on the source CS and download the CMU Bundle created on it.
5. Upload the CMU Bundle created in previous step to the Target CS and import the configurations from that.Verify that the CMU process is completed successfully on the Target CS instance.
6. Create a new archiver instance on the Source CS and export all the contents in that.
7. Open the Archiver Applet for the target CS instance and then Point the collections to the collections.hda of the source CS instance so that we can import the contents. Start the Import process on target server.
8. Once the CMU and Archiver Process are completed then your 10gR3 CS would be an exact replica of the Source 7.5.1 Instance.
You may also go through System Migration Guide to get more understanding on the Migration / Upgrade processes.
Hope this helps
Thanks
Srinath

Steps to create a custom Window component?

What steps do I need to take to create a custom Window component? My approach now results in the component being uneditable in design view. What I do is simply select "New > MXML component", base it on spark.components.Window and supply a filename. I tried with a Panel component and that works fine.

Hi,
Step by Step creation of SAP Payroll Funcitons:
1) Follow the menu path
   Human Resources>>Time Management>>Administration>>Tools>>Funtions/Operations
   or transaction PE04. Enter a four digit name for e.g ZIABC, and press the create
   button, enter the description. On creation the system proposes the name of
   the routine use it, or enter a name of your choice by selecting the option 'Self-defined'.
2) During the execution of payroll some tables are filled with wage types and there amounts
   to make these tables available to your routine enter the name of the table for e.g (RT or
   CRT) in the input parameters, and to make the changes done to the data in the tables
   avaiable to the payroll enter the name of the table in the Output parameters as well.
   Input Parameters
   Ctry                                         Num     Object Name
   99                                           1       RT
   99                                           2       CRT
and same shall be done in the Output Paramters if required.
3) Create an include in the program PCBURZ990 (using Transaction:
SE38), in which create a subroutine with the name supplied by SAP or the
name selected by you during Funtion creation,
in our case, it is FUZIABC.
Note: The program PCBURZ990 is in SAP Namespace, so an Access Key
will be required before you can proceed. But it will not be overwritten during any upgrade.
*Example of the subroutine
   FORM FUZIABC.
*enter the code
   ENDFORM.
4) After this activate the program the Funtion and add it in the schema used for payroll processing.
Reward points if helpful.
Regards,
Manoj.

Custom Pipeline Component error

I have created a custom pipeline component which references a template file on the local drive e.g. c:\test\template.xlsx. however when I run the application the Send pipeline fails Reason: 'c:\test\template.xlsx' could not be found.
It does exist, everything is spelt correctly and the host account has access to the folder. Why can't the component see it?
----------------<0>----------------
http://redeyedmonster.co.uk
----------------<0>----------------

I tried a code as highlighted by Rachit, but I don’t see issue as the referred blog suggest.
Coming to questioners code, I created a quick pipeline component which uses a dll for
Microsoft.Office.Interop.Excel
accessing the excel files and does something with Excel file.
Few things I want to highlight here.
If the questioner (RedEyeMonster) is using the same dll (Microsoft.Office.Interop.Excel)
in the pipeline component as I used, then I am afraid Workbooks.Open’s component doesn’t just take one parameter as shown.
Open method doesn’t have any overloaded methods. It takes few parameter and its worth checking each one on them.Some of the parameter are very important and could cause issues (like
ReadOnly , IgnoreReadOnlyRecommended, Editable etc). As said, the
Workbooks .Open method doesn’t just have template file location parameter. It’s worth reviewing the code again.
Microsoft.Office.Interop.Excel.Application excelApplication = new Microsoft.Office.Interop.Excel.Application();
//When I tried without the following couple of lines, my program waited for long time and crashed
excelApplication.DisplayAlerts = false;
excelApplication.Visible = true;
Microsoft.Office.Interop.Excel.Workbook excelWorkboook = excelApplication.Workbooks.Open(@"C:\MRAshwinPrabhu\TestExcel.xsl", 2, false,
5, "", "", true, Microsoft.Office.Interop.Excel.XlPlatform.xlWindows, "",
false, false, 0, false, true, 0);
While trying the code, I create a excel file as extension *.xls (older version of Excel 97-2003 workbook) and in the code I tried to open the file as “C:\foldername\FileName.xlsx”.
*.xls and *.xlsx are different, though in the folder the excel icon may look similar they are different file extensions. I for the same error as the questioner.
Also issue I faced while trying this is “DisplayAlerts”
property. When I tried without setting this property to false, my program just waited for long time and crached evently. So when you use in a program like pipeline where you don’t have UI, ensure this property is set to false.
Hope the above suggest would help the questioner.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Create custom declarative component like container

Hi all,
I'm using Jdev 12c.
I wanna create a custom declarative component like this:
container.jsf :
<af:panelGroupLayout id="#{attrs.Name}_VIEWPORT" layout="scroll" binding="#{attrs.Binding}"
                         inlineStyle="position:absolute;width:#{attrs.ViewportWidth}px;height:#{attrs.ViewportHeight}px;top:#{attrs.ViewportY}px;left:#{attrs.ViewportX}px;border:1px solid;background:#c6c6ff;z-index:#{attrs.ZIndex};">
        <af:panelGroupLayout id="#{attrs.Name}" layout="scroll"
                             inlineStyle="position:absolute;width:#{attrs.Width}px;height:#{attrs.Height}px;">
        </af:panelGroupLayout>
    </af:panelGroupLayout>
<af:xmlContent>
        <afc:component>
            <afc:description/>
</af:xmlContent>
I use this custom component to group some child components like this:
<abc:container ...>
     <af:inputText ... />
     <af:inputText ... />
</abc:container>
But the things is in Java code, I cannot get RichInputText components :
this is my function:
    private void getFacetAndChild(UIComponent parent) {
        Iterator childrens = parent.getFacetsAndChildren();
        while (childrens.hasNext()) {
            UIComponent child = (UIComponent)childrens.next();
            System.out.println("Log child >> " + child);
            getFacetAndChild(child);
this function only print the second RichPanelGroupLayout.
Any ideas to help me to get all RichInputText ?
Thanks and Best Regards!

Hi All,
I found the solution. Just add one facet to Custom Container
<af:panelGroupLayout id="#{attrs.Name}_VIEWPORT" layout="scroll" binding="#{attrs.Binding}"
                         inlineStyle="position:absolute;width:#{attrs.ViewportWidth}px;height:#{attrs.ViewportHeight}px;top:#{attrs.ViewportY}px;left:#{attrs.ViewportX}px;border:1px solid;background:#c6c6ff;z-index:#{attrs.ZIndex};">
        <af:panelGroupLayout id="#{attrs.Name}" layout="scroll"
                             inlineStyle="position:absolute;width:#{attrs.Width}px;height:#{attrs.Height}px;">
                       <af:facetRef facetName="child"/>
        </af:panelGroupLayout>
    </af:panelGroupLayout>
<af:xmlContent>
        <afc:component>
            <afc:description/>
</af:xmlContent>
And the used page:
<abc:container ...>
     <f:facet name="child">
          <af:inputText ... />
          <af:inputText ... />
     </f:facet>
</abc:container>
Maybe this solution will help others to create a custom container
Thanks and Best Regards!

Creating a custom JSF Component

Hi,
I am trying to create a custom JSF Component. My ultimate goal is to pass a bean to my custom component and have the component render some HTML output based on the info contained in the bean. Before I attempt that I am trying to get a simple custom component to just work. This component is based on the tutorial found here: http://www.jsftutorials.net/components/index.html
This tutorial just creates a component that outputs a <div> tag around the body contents of the custom component.
To keep this short I have done the following items from the tutorial link above:
1) I have created the tld file defining the tag class, name, uri and shortname
2) I have also created the tag class called TickerTag.java along with the component class UITicker.java. These classes are straight copy-and-paste jobs from the tutorial link and compile fine.
3)My faces-config.xml file has the proper component definition of
<component>
<component-type>ticker</component-type>
<component-class>ticker.UITicker</component-class>
</component>
This was the easy part. The example then goes on to use the custom component in a JSP page. I managed to get the custom component to work in a JSP page BUT my problem is getting the custom component to work in an XHTML file.
I thought all I had to do was define an xml namespace using the uri from my tld file like so:
Note: My uri is www.fubar.com/tags and is defined in the tld file.
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:t="http://myfaces.apache.org/tomahawk"
xmlns:u="http://www.fubar.com/tags">
I then try to use the tag like so <u:ticker> <f:verbatim>Hello JSF Component</f:verbatim></u:ticker>
I am expecting the following output: <div>Hello JSF Component
</div>
but instead I get
<u:ticker>Hello JSF Component</u:ticker>
It seems the tag is not even processed. This is my first jump into custom components. I have done custom JSP tags in the past but I never tried to display them on an XHTML page.
If you are wondering why I am using XHTML pages, this was setup a while back by a previous developer. Changing everything to a JSP would take a long time and probably break some stuff I am not aware of yet. As such the web.xml file of this JSF web app has the following:
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>
So all *.jsf files are processed and sent to the corresponding .xhtml file.
I have looked up creating custom components on google and every last example uses their newly created components in a jsp file. No XHTML uses so far.
Below are my tld files and xhtml file if that helps:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>
<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name>u</short-name>
<uri>http://www.fubar.com/tags</uri>
<tag>
<name>ticker</name>
<tag-class>ticker.TickerTag</tag-class>
<body-content>JSP</body-content>
</tag>
</taglib>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:t="http://myfaces.apache.org/tomahawk"
xmlns:u="http://www.fubar.com/tags">
<html>
<head>
<title>Show Custom Component</title>
</head>
<body>
<f:view>
<u:ticker> <f:verbatim>Hello JSF Component</f:verbatim></u:ticker>
</f:view>
</body>
</html>
Any suggestions/help are much appreciated,
Nick
</div>

Thanks Ray. I'll take a look at that site.
I managed to figure out my problem. I never created a .taglib.xml file that reference the component I defined in the faces-config.xml file. Once I did that everything work perfectly.
I managed to use this forum post as a guide.
http://osdir.com/ml/java.facelets.user/2006-12/msg00042.html
I hope this helps anyone else.
Nick

Help on custom actionscript component

Similar Messages

Maybe you are looking for