Help on Picking list (T Code - CO27)... VERY URGENT

Hi all, anyone in here who has sound knowledge on picking list, if so kindly help me with this, its very urgent.
Scenario:
For an item in the Production order, the picking list is showing open qty = 0 & shortage = 0, while the item has already been picked. I am not able to understand why this line is still existing even after the pick.

Vivek,
I assume that you are looking at the materail document which was created for GI and communicating that indicator is set, you looked at the right place.
But the resolution now is set this indicator directly in the order "Component overview" screen. You can see this indicator on the right side of the component record.
Hope this helps....
Regards,
Prasobh

Similar Messages

Error in Picking List (T-Code - CO27) - Urgent help pls

Hi all,
Situation-
   A work order has been released & the item for it has been made available using the picking list (CO27). However when i check the picking list again, the same item is still showing, but the Open Qty & Shortage fields show 0. I am not able to figure out how the item is still seen despite me picking it.
   When i select the line & click status, in the Business Processes tab, Release Component has a red indicator & says Error - BS 013 (System status REL is active), is this causing the problem & if yes how can i rectify it.
   Solutions please......

Hi Aaron,
Apologies for the delayed reply. I would like to inform you i am not a ABAPer so i dont know if what i did would be of benefit to you. But what actually had happened was the FI indicator was not ticked in the order & this was causing that error. This indicator i got to know is ticked automatically when the issual is done, but due to certain circumstances it might not be ticked, this happens due to some manual intervention is what i was made understood. I hope this was of some help to you. But i would say, it is better that u open a new thread & ask the experts for their view-point.
Regards,
Vivek

BAPI/Userexit for pick list - t code - CO27

Hi All,
Please some one help me in finding the BAPI / USEREXIT used in T code - CO27 (picking list) .
I am trying to find out but could not succeed.
Thanks,
Vengal Rao.

Hi.,
Check this article ., [How to find BADI/User Exit for SAP transaction|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0041d4e6-1e43-2e10-0db4-9386abe98fe6?quicklink=index&overridelayout=true]
also this wiki., http://wiki.sdn.sap.com/wiki/display/ABAP/TofindoutUserExit%27sandBADI%27sforAnyTransactioncode
hope this helps u.,
Thanks & Regards
Kiran

I defaulted input help field (pick list) but SAP CRM still asking for one

We are running SAP CRM 7.0.
Some fields as you know are dialog / pick list fields.
What I mean by this is they are input help fields where you
can click a little square (in sap crm 7.0) to the right of the text box
and it brings up a dialog screen of values that you can select from.
Here is an example screen shot of what I am talking about:
http://img834.imageshack.us/img834/5676/imageschak.png
So what I have done is implemented the GETTER function for this input help field so that by default it has a value.
The code is like so:
method GET_CURRENCY.
CALL METHOD SUPER->GET_CURRENCY
EXPORTING
    ATTRIBUTE_PATH = attribute_path
   ITERATOR       = iterator
RECEIVING
    VALUE          = value.
      if value eq ''.
        IF sy-langu EQ 'E'.
          VALUE = 'USD'.
        elseif sy-langu EQ 'D'.
          VALUE = 'EUR'.
        ENDIF.
      endif.
endmethod.
Here even is a link to this method that I created: Field Currency of Context Node BTADMINH - How to set default
The method works great it sets the default of the currency to say USD. When I click the create button to create an opportunity the field currency is set to USD, this is great because it makes my job easier that I dont have to click the input help button and select a currency, it is already there.
But once I click the "Save" button for an opportunity I get a small error in the error notification box that tells me I need to select a currency! But why is this happening a currency already exists? So If I click the input help (the little button) and reselect the currency value USD then save my opportunity this error goes away.
The question is why does this happen? I need it so that the default currency value is recognized by the SAP CRM system. Why do I have to go back in and re-select the currency if it is already set? Is there some sort of consistency check or something I need to do to eliminate this problem?
Here is a screen shot after creating an opportunity with the default Currency set to USD (this means I did not select USD in the dialog input help it was defaulted by the getter method:
http://img832.imageshack.us/img832/3011/enteracurrency.png
Only if I go back into edit mode and actually click the little square to bring up the dialog of values and select USD does this error go away. Why does this happen ?

I called SET_CURRENCY right after setting my value and the error is now gone.
SET_CURRENCY( EXPORTING ATTRIBUTE_PATH = ATTRIBUTE_PATH
                iterator = iterator
                value = value ).
Got the tip from Pieter who has a good blog on SAP CRM: http://sapcrmweblog.blogspot.com/

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Need help on BAPI_SALESORDER_SIMULATE.....very urgent

Hi all,
Is there a way to pass material pricing group for each item to BAPI_SALESORDER_SIMULATE?I could not find any field in items structure that could accept material pricing group?I need the pricing conditions and credit card out details based on material pricing group while simulating a sales order?If there is any other way to achieve the purpose please let me know....
Thanks in advance...
Santhoshi

Hi Yoeri,
Thanks for your reply.But the field PRC_GROUP1 is price group(KONDA) but not material pricing group(KONDM).You can observe the difference in VA03 transaction in Item Overview->Sales B tab.They are two different fields Material Pricing Group and Price Group.
<b>Actual requirement is</b>:
I need to simulate a sales order using BAPI_SALESORDER_SIMULATE, and retrieve the pricing details and credit card details. Now the problem is i am unable to find a field which holds material pricing group, due to which the pricing details and credit card ammount details that are returned are having incorrect values.
I would appreciate if you could please help me out in solving this requirement.
Thanks in advance
Santhoshi

Procurement List according to Vendor(Very Urgent)

Dear Experts,
I need a report,which should give all purchasing details with respect to vendor in a period(Month Wise)...
How to get this???
Please reply me...Its Urgent....
Regards
MK

Hi
Generaly ME2L will give all reports vendor wise in a perticular period
also u can use ME80FN with dynamic selection to search with additional options
Vishal...

Hello! I need help for Adobe Muse vertical menu! very urgent!!!

Hello!
How can i make a menu like this in adobe Muse: http://www.bryanschutmaat.com/
- vertical menu with vertical submenu
Thanks!!

To achieve this, you can use an accordion widget with custum styling.
IF you search for Terry White, Muse, accordion, you will find some video tutorials on YouTube.

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

CO27 Picking List - Printer Setup

Hello All SAP Gurus,
I have a requirement to print the picking list using Transaction CO27 to a different SAP printer.
Could one of you guru please tell me how to configure the different printer for CO27.
Thanks for your help,
Best Regards,
Gary

Hi,
As per your query you have to consult with SD consultant, because they have to configure accofdingly.
Anil

Pls Help...VERY URGENT

Hi all,
I am unable to get a certain output from the code I have written: Below is the code.
public class project extends JApplet
     private JLabel promptLabel;
     private JTextField inputField,displayField;
     private JTextArea outputArea;
     public void init()
          Container container = getContentPane();
          String s1 = JOptionPane.showInputDialog("Enter a few alphabets");
          String.valueOf(s1);
          outputArea = new JTextArea();
          container.add(outputArea);
          outputArea.setText("The alphabets that you have entered are: "+s1);
I am suppose to get the output below:
The user will be prompted to enter a few alphabets.After the user clicks on 'OK' a java applet is suppose to popout with the alphabets the user has typed like in below. the user has to enter a message using the alphabets he gave(e.g abcd)
please enter a message using the alphabets entered:___________
a
b
c
d
I am unable to get the output.. I dunno how to go about getting the output above.. Another query, below is a Histogram class.
class Histogram
     int frequency[];
     String alphabet;
     Histogram(String alphabet)
          this.alphabet=alphabet;
          frequency=new int[alphabet.length()];
     void scan(String message)
          for(int i=0;i<message.length;i++)
               frequncy[alphabet.IndexOf(message.charAt(i))]++;
     void setfrequency(int frequency[])
          for(int i=0;i<alphabet.length;i++)
          this.frequency=frequency[i];
     double entropy()
          int total=0;
          double probablity;
          log2=Math.log(2.0);
          for(int i=0;i<alphabet.length;i++)
               total+=freguency[i];
If I want to get the frequency of each alphabet displayed in the applet, how do i go about implementing the setfrequency method in the java applet.. I hope some one can help me.. Pls it is very urgent.. Thanx

Hi Thanx, your code helped. I have got another question. How do i implement a method from another method class into the applet. say, i want to implemen set frequency from the below code into my applet you wrote above?
class Histogram
     int frequency[];
     String alphabet;
     Histogram(String alphabet)
          this.alphabet=alphabet;
          frequency=new int[alphabet.length()];
     void scan(String message)
          for(int i=0;i<message.length;i++)
               frequncy[alphabet.IndexOf(message.charAt(i))]++;
     void setfrequency(int frequency[])
          for(int i=0;i<alphabet.length;i++)
          this.frequency=frequency[i];
     double entropy()
          int total=0;
          double probablity;
          log2=Math.log(2.0);
          for(int i=0;i<alphabet.length;i++)
               total+=freguency[i];

Plz help me TEXTPOOL PROBLEM(VERY URGENT)

hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
FORM GET_SELSCREEN_TITLE TABLES P_SCREENS STRUCTURE DYNNR.
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
READ TEXTPOOL RSVAR-REPORT LANGUAGE SY-LANGU INTO RPOOL.
plz help me.

Hi !
Try this :
DATA RPOOL LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
Reward if usefull,
Regards,
Stéphane.

My iPhone hasn't turned on in 2 days and none of the solutions i have looked up worked, please help,this is a very urgent matter!

my iPhone hasn't turned on in two days and none of the solutions i have looked up worked. i need all the help i can get. this matter is very urgent!

Before we can help you we will need more information. Did you try to reset the phone while it was charging by holding the power button and home button until you saw the apple then let go? Please give a summary of what you have attempted, any error messages, what do you see on the screen, if anything.

F4 help for the field enhanced in IT 21 - Urgent!!!!!!!!!!!!!!!

Hi All,
I have enhanced IT 21 with a new field called "Country of citizenship" in custom include CI_0021.
For this i have assigned LAND1 as the domain and the data element. The value table for this is
T005. but the problem is i am not able to get any value in the F4 help for this field in PA30 screen
for IT 21. Please help me in solving this issue. its very urgent.
Rupesh

Hi,
    Use the follwoing function module, you get search help. But you have to pass your table name, field names below.
data: it_itab type help_info,
        rsmdy_ret type rsmdy.
data: it_itab1 type table of dselc initial size 0,
        it_itab2 type table of dval initial size 0.
it_itab-tabname = 'GMGR'.                " Table Name
it_itab-fieldname = 'GRANT_NBR'.         " Field Name
it_itab-MCOBJ = 'GMGRANT'.               " Name of the Search Help
it_itab-TCODE = 'CJ20N'.                 " Transaction Code
& Function Module for calling Search Helps from DYNPRO               &
CALL FUNCTION 'DD_SHLP_CALL_FROM_DYNP'
EXPORTING
    HELP_INFOS         = it_itab
IMPORTING
   SELECT_VALUE       = SELECT_VALUE
   RSMDY_RET          = RSMDY_RET
TABLES
    DYNPSELECT         = it_itab1
    DYNPVALUETAB       = it_itab2
exceptions
    others = 1   .
Pass the search help value to a temporary variable
l_temp = select_value.
Hope it helps you.
Regards,
CS.
Note: Reward points if helpful.
Edited by: CSY on Mar 19, 2008 4:51 PM

Very urgent regarding ALV

Hi all,
I have displayed data in alv.and the error condition is that if for a material if it has more than one S as ok_status records then it should throw an error. This logic is working fine.
Now suppose at first time user had entered S through keyboard which fails the condition so it throws an error first time.
Now user can change the ok status back to I or O from S (through keyboard although f4 help is available) which satisfies the conditon so that record should be saved. but when user presses save button then in the ALV display the changed status I or O for that record again converted back to status S automatically. and again gives an error.
if we try third time then it allows to save with record other than s ok status i.e. I or O.
this problem is comming only when we change the value through keyboard. If we select value using f4 help then whole logic is working fine, no problem at all.
Can you please help me out in this regard
Its very urgent.
Thanks & Regards
Ashutosh.

Hi,
to exclude toolbar buttons..
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
CALL METHOD G_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
<b>      IT_TOOLBAR_EXCLUDING = LT_EXCLUDE</b>
      IS_LAYOUT            = GS_LAYOUT
    CHANGING
      IT_FIELDCATALOG      = IT_FIELDCAT
      IT_OUTTAB            = IT_FINAL[].
and you told you are using REUSE_ALV_GRID_DISPLAY_LVC
then in the user_command do this....
then your problem will be solved.
in the top you declare this..
DATA: REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                         RS_SELFIELD TYPE SLIS_SELFIELD.
*then insert the following code in your USER_COMMAND routine...
IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
ENDFORM.
Regards
vijay

Help on Picking list (T Code - CO27)... VERY URGENT

Similar Messages

Maybe you are looking for