Help pls this is urgent

Is it possible to somehow restore the iphone of my mom's contacts? she had all of her contacts on her iPhone and none in my computer . My goal was to copy all of my , music that I have in my iPhone into the iphone of my mom on my computer but when I did the sync it replaced all of my moms' contacts in her iPhone with those that I had in Microsoft Outlook (which was the contacts in my iphone). Basically it erased all of her contacts in her iPhone and i'm scared to death because those contacts she had was for her work, and she is going to kill me if i dont get it back, so please... anyone?

Hi Pratik,
It is not easy to post the exact steps as it is quite complex, however let me try. Essentially there are three things you need to do
1 - Setup/configure the output control so the IDOC gets created when the relevant txn is posted.
2 - Configure ALE so an IDOC is sent to a configured partner (maybe a directory on the application server)
3 - Choose the IDOC format as XML
1 - Go to txn NACE. Choose V2 and select 'output type'. This will allow you to configure an output that shall be linked with the txns. By default output type TPS0 exists for your requirement. Next, choose 'condition records' choose output type TPS0 and specify the condition for which the output shall be generated (eg any delivery type values).
2 - Create ALE settings. You will need to seek help from someone there as there are quite a few things required for this. Essentially if you are using standard SAP IDOC and message, this should involve a few settings only(partner profile -->WE20, and port -->WE21).
3 - Choose XML as the port type and specify directory (or other info) for the port.
With all the above, you should now be ready to create a delivery and see that the output idoc has been created.
Ofcourse it is much more in detail, and you will encounter some problems but essentially speaking this is what you need to do.
hope this helps,
cheers,
Ajay

Similar Messages

  • Need help to this request urgent plzz

    Hi i am new to coldfusion i had a form and in form we have two date fields like date1------------ to date2----------------  and i   need to make the second date field default to 7 calendar days from the first date field that was entered.The new date field needs to be non changale
    any help regarding this
    thanks.

    Thanks BKBK for ur help but i had problem with this
    because i had a componet that is used to select date ie datepicker so when i try to do this i am getting
    error , below is my code , would u please help me
    <cfform name="dateForm" id="dateForm">
    <table>
        <td width="440">
        <cfinput type="text"
                       name="avDateFrom"
                       message="Job Available Date missing - please reenter in the mm/dd/yyyy format."
                       validate="date"
                       required="Yes"
                       size="10" > <cf_calendar datefield="avDateFrom">
        <span id="label"> through </span>
        <cfinput type="Text"
                       name="avDateTo"
                       message="Position Available date is missing, please reenter in the mm/dd/yyyy format.  "
                       validate="date"                 
                       size="10" bind="javascript:addDays({dateForm:avDateFrom})" ><img align="absbottom" src="/media/701/calendar.gif" alt="date"/>
        </td>
    </table>
    </cfform>

  • Big Doubt.. Help pls.. Urgent.. File to IDoc (Bypass)

    File to IDoc scenario( Bypass)-- Error ( Segment is missing) -- urgent pls.
    Hi Bhavesh and all,
    I done file to idoc scenario (Bypass)
    From the above thread i have hardcoded my XML file  by inserting BEGIN 
    and Segment = "1" in each of the new segment.
    Since it is a bypass scenario.. when it reach to production , the idoc -xml will come from one of the tool without having these BEGIN and SEGMENT = "1".
    Still XI will receive it??
    Because my doubt is i harcoded the XML file and finished my developement.
    Now iam getting the doubt that once they do testing in QA server..the XI will process it and not ?
    Can we able to achieve this even without BEGIN and SEGMENT = "1" ?
    or
    those fileds are mandatory?
    Pls suggest me .. its urgent.
    Regards
    Seema..

    Hi Seema,
    >> <i>Can we able to achieve this even without BEGIN and SEGMENT = "1" ?
    or
    those fileds are mandatory?</i>
       To post an idoc to R/3 system this fields are mandatory.
    >><i>From the above thread i have hardcoded my XML file by inserting BEGIN
    and Segment = "1" in each of the new segment.
    Since it is a bypass scenario.. when it reach to production , the idoc -xml will come from one of the tool without having these BEGIN and SEGMENT = "1".
    Still XI will receive it??</i>
       As you are just routing it...just XI will poll the file and sends data to the idoc ( as the source and target structure are same).
    Regards,
    Prasanthi.

  • PLEASE HELP! THIS IS URGENT! CAN'T INSTALL PRO AS IT SAYS DO NOT MEET MINIMUM SYSTEM REQUIREMENTS!

    I have a Macbook 10.6.8 and have AE CS5.5 installed already but when installing Premiere Pro it says cannot meet system requirements. At first I started to download and everything seemed ok until I put 2 nd disk in and then it just crashed. I cannot play Uk Region DVD's on my laptop is that to do with it, I hope not. Why is this happening? This is extremely urgent as this is for a job and I'll lose it if I can't sort it.
    PLEASE HELP

    do you meet or exceed these specs:
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8, v10.7, or v10.8**
    4GB of RAM (8GB recommended)
    4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    Additional disk space required for preview files and other working files (10GB recommended)
    1280x900 display
    7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
    OpenGL 2.0–capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    QuickTime 7.6.6 software required for QuickTime features
    Optional: Adobe-certified GPU card for GPU-accelerated performance
    This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.* Phone activation is not available.

  • I need help with this?  - Urgent!!!

    Hello,
    I am a beginner with Java, and C++. how can I parse the veritical bar? Could someone help me with this program please? It's due really soon
    TABLE:STUDENT
    | name | sid | class | degree |
    | ABC | 001 | SR | BS |
    | AAA | 002 | FR | BS |
    | BBBB | 050 | JR | BS |
    | CC | 033 | CL | MS |
    | ZZZZ | 201 | SO | BS |
    TABLE:COURSE
    | cname | cnum | prof | hrs |
    | DBMS | 157A | YAKLUR | 3.0 |
    | DS | 146 | PPP | 4.0 |
    Assignment 01 Due September 10th. (20 points)
    Write a program which will parse the above text file with
    tables and allow the user to select a table among the two
    and one or multiple columns of that table with a condition
    where the condition will be on a column with = or < or >.
    Example:
    SELECT (* or column name): name
    FROM (type a table name): STUDENT
    WHERE (give a condition ): degree = BS
    output:
    name
    ABC
    AAA
    BBBB
    ZZZZ

    Posts like this really get to me....
    I wasnt as fortunate as some and never had the opurtunity to go to school.. Instead I stayed up long hours reading away and learning to things on my own..
    being new to java is not an excuse to be lazy, and reliance on others to solve your problems will get you nowhere fast.....

  • PLEASE HELP ! THIS IS URGENT FOR ME ABOUT IPOD TOUCH APPS

    *I had an ipod touch 2.2 software, with about 30 apps ! some paid for, some not. and i had about 25 of them synced to my laptop. a virus hit my laptop, and i formated it. later, my ipod had a software crash thing, and i formated that too into 2.1. ALL MY PAID APPS ARE GONE ! i read that if i download them again, they would be free, but i don't remember them all ! there has to be a way where i can get them all back somehow ... please help*

    load up itunes
    go into the itunes store
    on the right hand side, under quick links, click account
    it might ask you to log in, do so.
    click on 'purchase history'
    it will give you a list of your purchases, sorted by date.

  • HT1766 help pls...urgent

    my ipad never plug into the pc, bt it consist a lot of critical data, itunes shown that it has to be set up as new ipad, does the data inside my ipad will lost??

    If I'm understanding you, you've never set up your ipad with a PC, but now need to and the computer and iTunes is telling you that you have to set it up as new. And in doing that all data will be lost?
    You're right. It will be. what you need to do is get the data you need to save off the iPad some how. UPload it to a service like Dropbox or sugar sync. Save it somehow, then you can sync and set it up.

  • I need help!  This is urgent!

    I was just browsing Safari like normal, and I opened up my bookmarks folder, and all of my bookmarks—thousands of them—had disappeared without a trace, as well as everything in the Favorites folder and the Reading List, both of which were also extensive.  It couldn't have been an iCloud syncing problem because I don't sync bookmarks on my phone with iCloud.  I tried rebooting Safari, hard-resetting my phone, and turning it off and on again.  I can't restore my phone because I have iCloud backups turned off.  What happened and how can I fix it?
    Additionally, I've never backed up my phone or synced it with anything in any way, shape or form.

    If you did a hard reset they're definitely gone by now.
    -Ethan

  • Sample code for sap hr program--pls treat this as urgent

    Hi ,
    This is the program on attendence incentive program, i have written
    REPORT  zhrpa0019    LINE-SIZE 270
                         LINE-COUNT  55(3)
                         NO STANDARD PAGE HEADING
                         MESSAGE-ID zm.
         T A B L E S                                                     *
    TABLES: pernr, pa2001, pa9002.
    *Type-pools
    TYPE-POOLS slis.
         I N F O T Y P E S                                               *
    INFOTYPES: 0008, 0001, 0002,2001,9002,0041.
         T Y P E S
    DATA:BEGIN OF t_data1 OCCURS 0,
           pernr LIKE pa0001-pernr,
           ename LIKE pa0001-ename,
           bukrs LIKE pa0001-bukrs,
           werks LIKE pa0001-werks,
           btrtl LIKE pa0001-btrtl,
           persg LIKE pa0001-persg,
           persk LIKE pa0001-persk,
           begda LIKE pa0001-begda,
           endda LIKE pa0001-endda,
           amount LIKE pa0008-bet01,
           cdate  LIKE pa0041-dat01,
        END OF t_data1.
         D A T A * Internal table and working area
    DATA: i_data1 LIKE   t_data1 OCCURS 0 WITH HEADER LINE.
        wa_data1 like line of t_data1 .
    DATA : BEGIN OF i_date OCCURS 0,
             pernr    LIKE   pa0041-pernr,
             cdate    LIKE   pa0041-dat01,
         END OF i_date.
    *Data : i_pa0041  like pa0041 occurs 0 with header line,
           wa_pa0041 like pa0041.
    *Data : i_p0001  like p0001 occurs 0 with header line.
    Constants
    CONSTANTS:  c_102007(6) VALUE '102007',
                c_25 TYPE p DECIMALS 1 VALUE '25.0',
                c_x VALUE 'X',
                c_a  value 'A',
                c_mcnp(4) value 'MCNP'.
    Variables
    DATA :   v_mvc  like pa0008-bet01,
           lv_bmonth    TYPE   char2,
           lv_byear     TYPE   char4,
           lv_date      TYPE   sy-datum.
    Parameters Selection
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(31) text-001.
    *PARAMETERS:: p_bmonth LIKE pv000-pabrp OBLIGATORY,
                p_byear LIKE pv000-pabrj  OBLIGATORY.
    SELECTION-SCREEN COMMENT 45(10) text-002.
    SELECTION-SCREEN END OF LINE.
    PARAMETERS: p_mvc(2) TYPE p DECIMALS 1 DEFAULT c_25,
                p_mctype  TYPE pa2001-awart DEFAULT c_mcnp,
                p_ditype  TYPE c  DEFAULT c_a,
                rb_test RADIOBUTTON GROUP grp1 DEFAULT 'X',
                rb_prod RADIOBUTTON GROUP grp1.
    SELECTION-SCREEN END OF BLOCK b1.
    Initialization                                     *
    INITIALIZATION.
      pnpstat2-low = '3'.
      pnpstat2-sign = 'I'.
      pnpstat2-option = 'EQ'.
      APPEND pnpstat2.
      CLEAR pnpstat2.
      pnpbukrs-low = 'SATS'.
      pnpbukrs-sign = 'I'.
      pnpbukrs-option = 'EQ'.
      APPEND pnpbukrs.
      CLEAR pnpbukrs.
      pnppersg-low = 'N'.
      pnppersg-sign = 'I'.
      pnppersg-option = 'EQ'.
      APPEND pnppersg.
      CLEAR pnppersg.
      pnpbtrtl-low = '2010'.
      pnpbtrtl-high = '2050'.
      pnpbtrtl-sign = 'I'.
      pnpbtrtl-option = 'EQ'.
      APPEND pnpbtrtl.
      CLEAR pnpbtrtl.
    **Clearing the variables
    CLEAR : lv_byear, lv_bmonth,
             lv_date.
    Get previous month from current date
    CALL FUNCTION 'CCM_GO_BACK_MONTHS'
       EXPORTING
         currdate   = sy-datum
         backmonths = 1
       IMPORTING
         newdate    = lv_date.
    lv_byear = lv_date(4).
    lv_bmonth = lv_date+4(2).
    MOVE lv_bmonth TO p_bmonth.
    MOVE lv_byear TO p_byear.
    AT Selection-screen                          *
    AT SELECTION-SCREEN.
      IF rb_prod = 'X' .
        IF sy-uname NP 'HRBTCH*'.
          MESSAGE e223(zhpa).
       else.
         UPDATE  pa0015
                  SET  begda = sy-datum
                      lgart = '216D'
                       bertg = P_MVC
                WHERE pernr = p0001-pernr.
         IF SY-SUBRC EQ 0.
           message i224(zhpa).
         endif.
         COMMIT WORK.
        ENDIF.
      ENDIF.
    T O P  O F  P A G E                                          *
    TOP-OF-PAGE.
      PERFORM f_top_of_page.
    E N D  O F   P A G E                                          *
    END-OF-PAGE.
    B E G I N   S E L E C T I O N                                *
    START-OF-SELECTION.
    GET  pernr.
      pnp-sw-ignorelockedrecords = 'N'.
      PERFORM f_get_hr_data.
    E N D   S E L E C T I O N                                    *
    END-OF-SELECTION.
    sort i_data1 by werks ascending
                      btrtl ascending
                      persg ascending
                      persk ascending
                      pernr ascending.
    check for test mode.
      if rb_test = 'X'.
        clear: i_data1.
        loop at i_data1 .
         perform f_fill_bdc.
         perform f_bdc_transaction using c_pa30.
        endloop.
      endif.
      perform f_display_report.
    *&      Form  f_top_of_page
          text
    -->  p1        text
    <--  p2        text
    FORM f_top_of_page.
      WRITE: text-t11, sy-repid ,
             65 text-t12,
             150 text-t13,
             158 sy-datum.
      IF rb_test = c_x.
        WRITE:/ text-t21, sy-mandt,
               75 text-t22,
               150 text-t23,
               158 sy-uzeit.
      ELSE.
        WRITE:/ text-t21, sy-mandt,
               117 text-t24,
               150 text-t23,
               158 sy-uzeit.
      ENDIF.
      WRITE:/ text-t31, sy-uname,
             150 text-t32,
             158 sy-pagno.
      ULINE.
    ENDFORM.                    " f_top_of_page
    *&      Form  f_get_hr_data
          text
    -->  p1        text
    <--  p2        text
    FORM f_get_hr_data.
      rp-provide-from-last p0001 space pn-begda pn-endda.
      IF pnp-sw-found = 1.
        PERFORM f_get_data_pa0008.
      ENDIF.
    ENDFORM.                    " f_get_hr_data
    *&      Form  f_get_data_pa0008
          text
    -->  p1        text
    <--  p2        text
    FORM f_get_data_pa0008.
      PERFORM f_get_confirm_date.
      rp-provide-from-last p0008 space pn-begda pn-endda..
      v_mvc = p_mvc.
      IF pnp-sw-found = 1.
       i_data1-cdate = i_date-cdate.
        MOVE p0001-pernr TO i_data1-pernr.
        MOVE p0001-ename TO i_data1-ename.
        MOVE p0001-werks TO i_data1-werks.
        MOVE p0001-btrtl TO i_data1-btrtl.
        MOVE p0001-persg TO i_data1-persg.
        MOVE p0001-bukrs TO i_data1-bukrs.
        MOVE p0001-persk TO i_data1-persk.
        MOVE i_date-cdate TO i_data1-cdate.
        MOVE v_mvc   TO i_data1-amount.
        APPEND i_data1.
        CLEAR i_data1.
      ENDIF.
    ENDFORM.                    " f_get_data_pa0008
    *&      Form  f_display_report
          text
    -->  p1        text
    <--  p2        text
    FORM f_display_report.
    perform alv_display.
    *Output to a list
    data : lv_stotal(5)  type n,
             lv_utotal(5)  type n,
             lv_format.
      constants : c_l value '|'.
      clear: i_data1.
      format color col_total intensified on.
      write: /, / 'Successfully Updated to Database:'.
      write: /.
      format reset.
      uline (200).
      format color col_heading intensified off.
      write : /1 c_l no-gap, (8) 'Pnumber' no-gap,
              c_l no-gap, (35) 'Name' no-gap,
              c_l no-gap, (5) 'PA' no-gap,
              c_l no-gap, (5) 'PSA' no-gap,
              c_l no-gap, (6) 'EE Grp' no-gap,
              c_l no-gap, (9) 'EE Subgrp' no-gap,
               c_l no-gap, (12) 'Amount' no-gap,
              200 c_l.
      uline (200).
    format reset.
      loop at i_data1 .
       perform f_format_amount.
        if lv_format = 'X'.
          clear lv_format.
          format color col_normal intensified off.
        else.
          lv_format = 'X'.
          format color col_normal intensified on.
        endif.
        write :/1 c_l no-gap, (8) i_data1-pernr no-gap,
               c_l no-gap, (35) i_data1-ename no-gap,
               c_l no-gap, (5) i_data1-werks no-gap,
               c_l no-gap, (5) i_data1-btrtl no-gap,
               c_l no-gap, (6) i_data1-persg no-gap,
               c_l no-gap, (9) i_data1-persk no-gap,
               c_l no-gap , (12) i_data1-amount no-gap.
    endloop.
    ENDFORM .                    "f_display_report
    *&      Form  get_confirm_date
          text
    -->  p1        text
    <--  p2        text
    FORM f_get_confirm_date .
      rp-provide-from-last p0041  space pn-begda pn-endda.
      IF pnp-sw-found = 1.
        CLEAR i_date.
        i_date-pernr = p0041-pernr.
        APPEND i_date.
        PERFORM f_populate_date USING : p0041-pernr
                                          p0041-dar01 p0041-dat01,
                                          p0041-pernr
                                          p0041-dar02 p0041-dat02,
                                          p0041-pernr
                                          p0041-dar03 p0041-dat03,
                                          p0041-pernr
                                          p0041-dar04 p0041-dat04,
                                          p0041-pernr
                                          p0041-dar05 p0041-dat05,
                                          p0041-pernr
                                          p0041-dar06 p0041-dat06,
                                          p0041-pernr
                                          p0041-dar07 p0041-dat07,
                                          p0041-pernr
                                          p0041-dar08 p0041-dat08,
                                          p0041-pernr
                                          p0041-dar09 p0041-dat09,
                                          p0041-pernr
                                          p0041-dar10 p0041-dat10,
                                          p0041-pernr
                                          p0041-dar11 p0041-dat11,
                                          p0041-pernr
                                          p0041-dar12 p0041-dat12.
      ENDIF.
    ENDFORM.                    " get_confirm_date
    *&      Form  f_populate_date
          text
         -->P_PERNR    text
         -->P_DAR      text
         -->P_DAT      text
    FORM f_populate_date USING   p_pernr p_dar p_dat.
      CLEAR i_date.
      READ TABLE i_date WITH KEY pernr = p_pernr.
      IF sy-subrc = 0.
        IF p_dar = 'A3'.
          i_date-cdate = p_dat.
          MODIFY i_date INDEX sy-tabix.
        ENDIF.
      ENDIF.
      endform.
    i need to add the logic , could you pls help as this is very urgent.........
    IF test run = ‘X’     
         Display the report
    IF production run = ‘X’
         1. Batch user ID ‘HRBTCH*’ performed the execution.
         Create new record based on the following parameters:               
    -     PA0015-BEGDA = System Date  (date of origin)
    -     PA0015-LGART = 216D (wage type)
    -     PA0015-BETRG = IAP amount (25)
              Display the report.
         2. Program was not executed by Batch user ID ‘HRBTCH*’
              Display information message ‘Only batch user ID can run actual mode.
              Display the report
    No update will be done.
    ENDIF.
    how to addd in the above code.....

    REPORT  ZHR_ATTENDANCE_RPT MESSAGE-ID ZHR.
                     T Y P E    P O O L S                                *
    TYPE-POOLS : SLIS.
                          T A B L E                                     *
    TABLES : TEVEN,
             PA0000,
             PA0001,
             T503K,
             T500P.
              I N T E R N A L   T A B L E   D E C L A R A T I O N        *
    DATA : BEGIN OF IT_PA0001 OCCURS 0,
           PERNR TYPE PA0001-PERNR,
           ENDDA TYPE PA0001-ENDDA,
           WERKS TYPE PA0001-WERKS,
           BTRTL TYPE PA0001-BTRTL,
           ORGEH TYPE PA0001-ORGEH,
           PERSK TYPE T503T-PERSK,
           ENAME TYPE PA0001-ENAME,
           END OF IT_PA0001.
    DATA : BEGIN OF IT_PA0000 OCCURS 0,
           PERNR TYPE PA0000-PERNR,
           END OF IT_PA0000.
    DATA : BEGIN OF IT_TEVEN OCCURS 0,
           PERNR TYPE TEVEN-PERNR,
           LDATE TYPE TEVEN-LDATE,
           LTIME TYPE TEVEN-LTIME,
           SATZA TYPE TEVEN-SATZA,
           END OF IT_TEVEN.
    DATA : IT_TEVEN1 LIKE IT_TEVEN OCCURS 0 WITH HEADER LINE.
    DATA : BEGIN OF IT_T527X OCCURS 0,
           ORGEH LIKE T527X-ORGEH,
           ORGTX LIKE T527X-ORGTX,
           END OF IT_T527X.
    DATA : BEGIN OF IT_T503T OCCURS 0,
           PERSK TYPE T503T-PERSK,
           PTEXT TYPE T503T-PTEXT,
           END OF IT_T503T.
    DATA : BEGIN OF IT_FINAL OCCURS 0,
           PERNR LIKE PA0001-PERNR,
           ENAME LIKE PA0001-ENAME,
           LDATE LIKE TEVEN-LDATE,
           TPROG LIKE PTPSP-TPROG,
           LTIMEI LIKE TEVEN-LTIME,
           LTIMEO LIKE TEVEN-LTIME,
           ORGTX LIKE T527X-ORGTX,
           PTEXT TYPE T503T-PTEXT,
           ATEXT TYPE ABWTXT,
           END OF IT_FINAL.
    DATA : IT_PTPSP LIKE PTPSP OCCURS 0 WITH HEADER LINE.
    *Table to get Holiday
    DATA : IT_ISCAL_DAY LIKE ISCAL_DAY OCCURS 0 WITH HEADER LINE.
    DATA : IT_T554T TYPE T554T OCCURS 0 WITH HEADER LINE.
    *ALV data declarations
    DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV,
          X_FIELDCATALOG TYPE SLIS_FIELDCAT_ALV,
          GD_LAYOUT    TYPE SLIS_LAYOUT_ALV,
          GD_REPID     LIKE SY-REPID.
    *For ALV Events
    DATA : IT_EVENT1 TYPE SLIS_T_EVENT.
    *For ALV Events
    DATA : IT_EVENT TYPE SLIS_ALV_EVENT.
    *For ALV top of page
    DATA : IT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
    *For top of page heading
    DATA : IT_LINE TYPE SLIS_LISTHEADER.
    Variables declaration                                         *
    DATA : V_SHIFT LIKE PTPSP-TPROG,
           V_TEMP TYPE I,
           V_DATE TYPE DATUM,
           V_LDATE TYPE SY-DATUM,
           V_MODIF TYPE HIDENT,
           V_SUBTY TYPE PA2002-SUBTY,
           V_ENDDA TYPE CHAR10.
    SELECTION SCREEN                                              *
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS : S_PERNR FOR TEVEN-PERNR,
                     S_DATE  FOR TEVEN-LDATE no-extension,
                     S_ORGEH FOR PA0001-ORGEH,
                     S_WERKS FOR PA0001-WERKS,
                     S_BTRTL FOR PA0001-BTRTL,
                     S_PERSK FOR PA0001-PERSK,
                     S_STAT2 FOR PA0000-STAT2.
    SELECTION-SCREEN END OF BLOCK B1.
               A T   S E L E C T I O N   S C R E E N                     *
    *validatating Selection Screen
    AT SELECTION-SCREEN ON S_PERNR.
    *Validate the User entered year
      PERFORM VALIDATE_PERNR.
    AT SELECTION-SCREEN ON S_DATE.
    *Validate the User entered date
      PERFORM VALIDATE_DATE_LOW.
    AT SELECTION-SCREEN ON S_ORGEH.
    *Validate the User entered year
      PERFORM VALIDATE_ORGEH.
    AT SELECTION-SCREEN ON S_PERSK.
    *Validate the User entered year
      PERFORM VALIDATE_PERSK.
    AT SELECTION-SCREEN ON S_WERKS.
    *Validate the User entered Personnel area
      PERFORM VALIDATE_WERKS.
    START OF SELECTION                                             *
    START-OF-SELECTION.
    *Get data
      PERFORM GET_DATA.
    *Process data
      PERFORM PROCESS_DATA.
                  E N D    O F     S E L E C T I O N                    *
    END-OF-SELECTION.
      PERFORM BUILD_FIELDCATALOG.
      PERFORM BUILD_LAYOUT.
    *For ALV Events
      PERFORM ALV_EVENTS.
      PERFORM DISPLAY_ALV_REPORT.
    *&      Form  VALIDATE_YEAR
          Validating the year
    FORM VALIDATE_PERNR .
      IF NOT S_PERNR IS INITIAL.
        SELECT SINGLE * FROM PA0001 WHERE PERNR IN S_PERNR.     "#EC *
        IF SY-SUBRC <> 0.
          MESSAGE E000 WITH 'Enter valid Employee Number'(002).
        ENDIF.
      ENDIF.
    ENDFORM.                    " VALIDATE_pernr
    *&      Form  VALIDATE_YEAR
          Validating the year
    FORM VALIDATE_ORGEH .
      DATA: V_ORGEH LIKE T527X-ORGEH.
      IF NOT S_ORGEH IS INITIAL.
        SELECT SINGLE ORGEH FROM T527X INTO V_ORGEH WHERE ORGEH IN S_ORGEH.
        IF SY-SUBRC <> 0.
          MESSAGE E000 WITH 'Enter Valid Organization Unit'(003).
        ENDIF.
      ENDIF.
    ENDFORM.                    " VALIDATE_orgeh
    *&      Form  GET_DATA
          Get data
    FORM GET_DATA.
      SELECT PERNR
             FROM PA0000
             INTO TABLE IT_PA0000
             WHERE PERNR IN S_PERNR
             AND   ENDDA GE S_DATE-LOW
             AND   BEGDA LE S_DATE-HIGH
             AND   STAT2 IN S_STAT2.
      IF SY-SUBRC = 0.
        DELETE ADJACENT DUPLICATES FROM IT_PA0000 COMPARING PERNR.
        SORT IT_PA0000.
      ENDIF.
      IF NOT IT_PA0000[] IS INITIAL.
        SELECT PERNR
               ENDDA
               WERKS
               BTRTL
               ORGEH
               PERSK
               ENAME
               FROM PA0001
               INTO TABLE IT_PA0001
               FOR ALL ENTRIES IN IT_PA0000
               WHERE PERNR = IT_PA0000-PERNR
               AND   ENDDA GE S_DATE-LOW
               AND   BEGDA LE S_DATE-HIGH
               AND   ORGEH IN S_ORGEH
               AND   WERKS IN S_WERKS
               AND   PERSK IN S_PERSK
               AND   BTRTL IN S_BTRTL.
        IF SY-SUBRC = 0.
          SORT IT_PA0001 BY PERNR ENDDA DESCENDING.
          DELETE ADJACENT DUPLICATES FROM IT_PA0001 COMPARING PERNR.
          SORT IT_PA0001 BY PERNR.
        ENDIF.
      ENDIF.
      IF NOT IT_PA0001[] IS INITIAL.
        SELECT PERNR
               LDATE
               LTIME
               SATZA
               FROM TEVEN
               INTO TABLE IT_TEVEN
               FOR ALL ENTRIES IN IT_PA0001
               WHERE PERNR = IT_PA0001-PERNR
               AND   SATZA = 'P10'
               AND   LDATE IN S_DATE
               AND   STOKZ NE 'X'.
        IF SY-SUBRC = 0.
          SORT IT_TEVEN BY PERNR LDATE.
        ENDIF.
      ENDIF.
      IF NOT IT_PA0001[] IS INITIAL.
    v_date = s_date-high + 1.
        SELECT PERNR
               LDATE
               LTIME
               SATZA
               FROM TEVEN
               INTO TABLE IT_TEVEN1
               FOR ALL ENTRIES IN IT_PA0001
               WHERE PERNR = IT_PA0001-PERNR
               AND   SATZA = 'P20'
               AND  ( LDATE IN S_DATE or ldate = v_date )
               AND   STOKZ NE 'X'.
        IF SY-SUBRC = 0.
          SORT IT_TEVEN1 BY PERNR LDATE.
        ENDIF.
      ENDIF.
      IF NOT IT_PA0001[] IS INITIAL.
        SELECT ORGEH
               ORGTX
               FROM T527X
               INTO TABLE IT_T527X
               FOR ALL ENTRIES IN IT_PA0001
               WHERE ORGEH = IT_PA0001-ORGEH.
        IF SY-SUBRC = 0.
          SORT IT_T527X BY ORGEH.
        ENDIF.
      ENDIF.
      IF NOT IT_PA0001[] IS INITIAL.
        SELECT PERSK
               PTEXT
               FROM T503T
               INTO TABLE IT_T503T
               FOR ALL ENTRIES IN IT_PA0001
               WHERE PERSK = IT_PA0001-PERSK
               AND   SPRSL = 'E'.
        IF SY-SUBRC = 0.
          SORT IT_T503T BY PERSK.
        ENDIF.
      ENDIF.
      SELECT *
             FROM T554T
             INTO TABLE IT_T554T
             WHERE SPRSL = 'EN'
             AND   MOABW = '40'.
    ENDFORM.                    " GET_DATA
    *&      Form  PROCESS_DATA
          Process data
    FORM PROCESS_DATA .
      V_TEMP = S_DATE-HIGH - S_DATE-LOW.
      V_TEMP = V_TEMP + 1.
      LOOP AT IT_PA0001.
        V_DATE = S_DATE-LOW.
        DO V_TEMP TIMES.
    *Get employee work schedule
          IF IT_PTPSP[] IS INITIAL.
            PERFORM GET_SCHEDULE.
          ENDIF.
    *Get holiday calendar
          IF IT_ISCAL_DAY[] IS INITIAL.
            PERFORM GET_HOLIDAY.
          ENDIF.
          CLEAR : V_SUBTY.
          SELECT SINGLE SUBTY
                        FROM PA2001
                        INTO V_SUBTY
                        WHERE PERNR = IT_PA0001-PERNR
                        AND   ENDDA GE V_DATE
                        AND   BEGDA LE V_DATE.
          IF SY-SUBRC = 0.
            READ TABLE IT_T554T WITH KEY AWART = V_SUBTY.
            IT_FINAL-ATEXT = IT_T554T-ATEXT.
          ENDIF.
          IF V_SUBTY IS INITIAL.
            SELECT SINGLE SUBTY
                          FROM PA2002
                          INTO V_SUBTY
                          WHERE PERNR = IT_PA0001-PERNR
                          AND   ENDDA GE V_DATE
                          AND   BEGDA LE V_DATE.
            IF SY-SUBRC = 0.
              IF V_SUBTY = '1000' OR V_SUBTY = '2000'.
                IT_FINAL-ATEXT = 'Training'.
              ELSEIF V_SUBTY = '3000'.
                IT_FINAL-ATEXT = 'Tour'.
              ENDIF.
            ENDIF.
          ENDIF.
    *Get the employee shift schedule for that date
          CLEAR : V_SHIFT.
          READ TABLE IT_PTPSP WITH KEY DATUM = V_DATE.
          IF SY-SUBRC = 0.
            V_SHIFT = IT_PTPSP-TPROG.
            IF IT_PTPSP-TAGTY = '1'.
              V_SHIFT = 'NOFF'.
            ENDIF.
          ENDIF.
          IF V_SHIFT = ''.
            CLEAR IT_FINAL.
            CONTINUE.
          ENDIF.
    *Check for holiday
          IT_FINAL-TPROG = V_SHIFT.
          READ TABLE IT_ISCAL_DAY WITH KEY DATE = V_DATE.
          IF SY-SUBRC = 0.
            IT_FINAL-TPROG = 'H'.
          ENDIF.
          IT_FINAL-PERNR = IT_PA0001-PERNR.
          IT_FINAL-ENAME = IT_PA0001-ENAME.
          IT_FINAL-LDATE = V_DATE.
    *To get the organization unit
          READ TABLE IT_T527X WITH KEY ORGEH = IT_PA0001-ORGEH
                                       BINARY SEARCH.
          IF SY-SUBRC = 0.
            IT_FINAL-ORGTX = IT_T527X-ORGTX.
          ENDIF.
          CLEAR IT_T503T.
          READ TABLE IT_T503T WITH KEY PERSK = IT_PA0001-PERSK
                                       BINARY SEARCH.
          IF SY-SUBRC = 0.
            IT_FINAL-PTEXT = IT_T503T-PTEXT.
          ENDIF.
    V_LDATE = v_DATE + 1.
    *To get Punch-in.
          READ TABLE IT_TEVEN WITH KEY PERNR = IT_PA0001-PERNR
                                       LDATE = V_DATE
                                       BINARY SEARCH.
          IF SY-SUBRC = 0.
            IT_FINAL-LTIMEI = IT_TEVEN-LTIME.endif.
    *To get Punch-out
            READ TABLE IT_TEVEN1 WITH KEY PERNR = IT_PA0001-PERNR
                                          LDATE = v_DATE
                                          BINARY SEARCH.
            IF SY-SUBRC = 0.
              IF IT_TEVEN1-LTIME > IT_FINAL-LTIMEI.
                IT_FINAL-LTIMEO = IT_TEVEN1-LTIME.
              ELSE.
                SELECT SINGLE LTIME
                              FROM TEVEN
                              INTO IT_FINAL-LTIMEO
                              WHERE PERNR = IT_PA0001-PERNR
                              AND   LDATE = v_DATE
                              AND   LTIME > IT_TEVEN1-LTIME
                              AND   SATZA = 'P20'
                              AND   STOKZ NE 'X'.
              ENDIF.
            ENDIF.
            IF IT_FINAL-LTIMEO IS INITIAL.
              IF V_SHIFT = 'NNIG' OR V_SHIFT = 'NAFT'..
                READ TABLE IT_TEVEN1 WITH KEY PERNR = IT_PA0001-PERNR
                                              LDATE =  V_LDATE
                                              BINARY SEARCH.
                IF SY-SUBRC = 0.
                  IT_FINAL-LTIMEO = IT_TEVEN1-LTIME.
                ENDIF.
              ENDIF.
            ENDIF.
            if ( V_SHIFT = 'NOFF' OR IT_FINAL-TPROG = 'H' )
            and it_final-ltimei is initial and it_final-ltimeo is not initial.
            clear: it_final-ltimeo.endif.
           APPEND IT_FINAL.
         ELSE.
    *If holiday or OFF or Tour or Absent
            IF V_SHIFT = 'NOFF' OR IT_FINAL-TPROG = 'H'
            or it_final-atext is not initial or
            ( it_final-ltimei is not initial and it_final-ltimeo is not initial ).
             APPEND IT_FINAL.
           ELSEIF IT_FINAL-ATEXT IS NOT INITIAL.
             APPEND IT_FINAL.
            ELSE.
              IT_FINAL-ATEXT = 'Absent'.
             APPEND IT_FINAL.
            ENDIF.
        ENDIF.
              APPEND IT_FINAL.
          CLEAR : IT_FINAL.
          V_DATE = V_DATE + 1.
        ENDDO.
        CLEAR : IT_PTPSP[],
                IT_ISCAL_DAY[].
      ENDLOOP.
      SORT IT_FINAL BY PERNR LDATE.
      LOOP AT IT_FINAL.
        TRANSLATE IT_FINAL-ATEXT TO UPPER CASE.
        MODIFY IT_FINAL INDEX SY-TABIX.
      ENDLOOP.
    ENDFORM.                    " PROCESS_DATA
    *&      Form  GET_SCHEDULE
          Get employee work schedule
    FORM GET_SCHEDULE.
      CALL FUNCTION 'HR_PERSONAL_WORK_SCHEDULE'
        EXPORTING
          PERNR         = IT_PA0001-PERNR
          BEGDA         = S_DATE-LOW
          ENDDA         = S_DATE-HIGH
        TABLES
          PERWS         = IT_PTPSP
        EXCEPTIONS
          ERROR_OCCURED = 1
          ABORT_OCCURED = 2
          OTHERS        = 3.
      IF SY-SUBRC <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " GET_SCHEDULE
    *&      Form  build_fieldcatalog
    FORM BUILD_FIELDCATALOG .
      X_FIELDCATALOG-COL_POS     = 1.
      X_FIELDCATALOG-FIELDNAME   = 'PERNR'.
      X_FIELDCATALOG-SELTEXT_L   = 'Personnel No'(006).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 2.
      X_FIELDCATALOG-FIELDNAME   = 'ENAME'.
      X_FIELDCATALOG-SELTEXT_L   = 'Employee Name'(007).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 5.
      X_FIELDCATALOG-FIELDNAME   = 'LDATE'.
      X_FIELDCATALOG-SELTEXT_L   = 'Date'(008).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 6.
      X_FIELDCATALOG-FIELDNAME   = 'TPROG'.
      X_FIELDCATALOG-SELTEXT_L   = 'Planned Shift'(009).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 7.
      X_FIELDCATALOG-FIELDNAME   = 'LTIMEI'.
      X_FIELDCATALOG-SELTEXT_L   = 'Attended Time-In'(010).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 8.
      X_FIELDCATALOG-FIELDNAME   = 'LTIMEO'.
      X_FIELDCATALOG-SELTEXT_L   = 'Attended Time-Out'(011).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 3.
      X_FIELDCATALOG-FIELDNAME   = 'ORGTX'.
      X_FIELDCATALOG-SELTEXT_L   = 'Organization Unit'(005).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 4.
      X_FIELDCATALOG-FIELDNAME   = 'PTEXT'.
      X_FIELDCATALOG-SELTEXT_L   = 'Emp Subgroup'(016).
      X_FIELDCATALOG-DDICTXT = 'L'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
      X_FIELDCATALOG-COL_POS     = 9.
      X_FIELDCATALOG-FIELDNAME   = 'ATEXT'.
      X_FIELDCATALOG-SELTEXT_L   = 'Leaves/Tours'(015).
      X_FIELDCATALOG-DDICTXT = 'L'.
      X_FIELDCATALOG-OUTPUTLEN = '25'.
      APPEND X_FIELDCATALOG TO FIELDCATALOG.
      CLEAR  X_FIELDCATALOG.
    ENDFORM.                    " build_fieldcatalog
    *&      Form  build_layout
    FORM BUILD_LAYOUT.
      GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
      GD_LAYOUT-ZEBRA = 'X'.
    ENDFORM.                    " build_layout
    *&      Form  ALV_EVENTS
          For ALV Events
    FORM ALV_EVENTS .
      IT_EVENT-NAME = 'TOP_OF_PAGE'.
      IT_EVENT-FORM = 'TOP_OF_PAGE'.
      APPEND IT_EVENT TO IT_EVENT1.
    ENDFORM.                    " ALV_EVENTS
    *&      Form TOP_OF_PAGE
          ALV TOP-OF-PAGE
    FORM TOP_OF_PAGE.                                           "#EC CALLED
      REFRESH : IT_LIST_TOP_OF_PAGE.
      CLEAR : IT_LINE.
      IT_LINE-TYP  = 'H'.
      IT_LINE-INFO = 'Attendance Report for the Period'(013).
      APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
      CONCATENATE S_DATE-LOW6(2) '.' S_DATE-LOW4(2) '.' S_DATE-LOW+0(4)
           INTO IT_LINE-INFO.
      CONCATENATE S_DATE-HIGH6(2) '.'  S_DATE-HIGH4(2) '.' S_DATE-HIGH+0(4) INTO V_ENDDA.
      CONCATENATE IT_LINE-INFO '-' V_ENDDA INTO IT_LINE-INFO SEPARATED BY SPACE.
      APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY = IT_LIST_TOP_OF_PAGE.
    ENDFORM.                               "TOP_OF_PAGE
    *&      Form  display_alv_report
    FORM DISPLAY_ALV_REPORT.
      GD_REPID = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM = GD_REPID
          IT_EVENTS          = IT_EVENT1
          IS_LAYOUT          = GD_LAYOUT
          IT_FIELDCAT        = FIELDCATALOG
        TABLES
          T_OUTTAB           = IT_FINAL
        EXCEPTIONS
          PROGRAM_ERROR      = 1
          OTHERS             = 2.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "display_alv_report
    *&      Form  VALIDATE_PERSK
          text
    -->  p1        text
    <--  p2        text
    FORM VALIDATE_PERSK .
      IF NOT S_PERSK IS INITIAL.
        SELECT SINGLE * FROM T503K WHERE PERSK IN S_PERSK.      "#EC *
        IF SY-SUBRC <> 0.
          MESSAGE E000 WITH 'Enter valid Employee subgroup'(012).
        ENDIF.
      ENDIF.
    ENDFORM.                    " VALIDATE_PERSK
    *&      Form  VALIDATE_WERKS
          Validate user Entered Personnel area
    FORM VALIDATE_WERKS .
      IF S_WERKS[] IS NOT INITIAL.
        SELECT SINGLE * FROM T500P WHERE PERSA IN S_WERKS.
        IF SY-SUBRC <> 0.
          MESSAGE E000 WITH 'Enter valid Personnel Area'(014).
        ENDIF.
      ENDIF.
    ENDFORM.                    " VALIDATE_WERKS
    *&      Form  VALIDATE_DATE_LOW
          Validate user Entered Date
    FORM VALIDATE_DATE_LOW .
      IF S_DATE-LOW IS INITIAL.
        MESSAGE E000 WITH 'Enter Date'(004).
      ENDIF.
      IF S_DATE-HIGH IS INITIAL.
        MESSAGE E000 WITH 'Enter Date'(004).
      ENDIF.
    ENDFORM.                    " VALIDATE_DATE_LOW
    *&      Form  GET_HOLIDAY
            Get Holiday
    FORM GET_HOLIDAY .
      CLEAR V_MODIF.
      SELECT SINGLE MOFID
                    FROM T001P
                    INTO V_MODIF
                    WHERE WERKS = IT_PA0001-WERKS
                    AND   BTRTL = IT_PA0001-BTRTL.
      CALL FUNCTION 'HOLIDAY_GET'
        EXPORTING
          HOLIDAY_CALENDAR           = V_MODIF
          DATE_FROM                  = S_DATE-LOW
          DATE_TO                    = S_DATE-HIGH
        TABLES
          HOLIDAYS                   = IT_ISCAL_DAY
        EXCEPTIONS
          FACTORY_CALENDAR_NOT_FOUND = 1
          HOLIDAY_CALENDAR_NOT_FOUND = 2
          DATE_HAS_INVALID_FORMAT    = 3
          DATE_INCONSISTENCY         = 4
          OTHERS                     = 5.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " GET_HOLIDAY
    <b>Reward Points if useful.</b>

  • Pls Help with this

    Hi,
    I need a help to resolve my problem.Actually i have a JSP page with a list box. When i select some value in the list box, appropriate values must list out according to the selected value.And i have a submit button to process that jsp page.
    I wrote a validation as all the fields must be entered to submit a page.
    But when i tried with the following code,it's just moving to processing page when i select a values from the list box.This is happening when i cheked the validation.
    Pls help with this code.This is very urgent.
    Code is as follows
    "Example1.jsp"
    <%
    String str1 = request.getParameter("Modem");
    %>
    <html>
    <head>
    <script language = "JavaScript">
    function Validate()
    if(document.UpdateFiosAccounts.Modem.value == "Select One")
    alert("Please select the value")
    document.UpdateFiosAccounts.Modem.focus()
    return false
    if(document.UpdateFiosAccounts.text1.value == "")
    alert("Please type some text")
    document.UpdateFiosAccounts.text1.focus()
    return false
    return true
    </script>
    </head>
    <body>
    <form name = "UpdateFiosAccounts" action="./Example1.jsp" method ="post" onSubmit= "return Validate()">
    Pls select One:<select name="Modem" size="1" onChange="document.UpdateFiosAccounts.submit()">
    <%
    if(str1 == null)
    %>
         <option value="Select One">Select One</option>
         <option value="One">One</option>
         <option value="Two">Two</option>
         <option value="Three">Three</option>
         <option value="Four">Four</option>
    <%
    else
    %>
         <option value="<%=str1%>"><%=str1%></option>
    <%
    %>
    </select><br>
    Pls type something: <input type ="text" name="text1">
    <input type ="submit" value="submit" onClick="document.UpdateFiosAccounts.action='./Accounts.jsp'">
    </form>
    </body>
    </html>

    Hi! The reason is that in the onChange property you are doing the submit, so, when you select something, it goes automatically and never pases through your validation function. So, remove that onChange. Next, the button is a submit buton, so, no matter what your validation does, the page will go. You need to change the submit type of the button to just button (<input type="button" onclick="function to validate">) and then you will get what you want. By the way, this is NOT a Java question, is more JavaScript question.
    Hope this helps.

  • While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

    Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

    I have the exact same issue right now!

  • Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

    Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

    Just a word of advice. Never ever use the word "urgent" on this forum

  • Urgently need help with this

    Hi!!
    I urgently need help with this:
    When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
    but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
    This is the mxml code to terminate apllication tag which I did as you can see:
    MXML code:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
    <mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
    <mx:Script source="dajzaj.as"/>
    <mx:states>
    <mx:State name="Galerije">
        <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
        <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
        <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>   
        <mx:AddChild relativeTo="{panel1}" position="lastChild">
        <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
                </mx:AddChild>
                <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
                <mx:AddChild relativeTo="{panel1}" position="lastChild">
                    <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
                </mx:AddChild>
                <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
                <mx:SetProperty target="{label1}" name="x" value="845"/>
                <mx:SetProperty target="{label1}" name="width" value="169"/>
                <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
            </mx:State>
            <mx:State name="Projekti"/>
        </mx:states>
    <mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
             itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
           <mx:XMLList id="MMEmenuModel">
                 <menuitem label="O nas">
                     <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                     <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
                  <menuitem label="Kontakt" name="podatMME" groupName="one" />
                  <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
                 </menuitem>           
                 <menuitem type="separator"/>
                 <menuitem label="Galerija">
                     <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                     <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
                 </menuitem>
                 <menuitem type="separator"/>
                 <menuitem label="projekti">
                     <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                     <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                     <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
                 </menuitem>
             </mx:XMLList>                       
             </mx:MenuBar>
        <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
        <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
        <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
            <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
        </mx:Panel>
        <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
        <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
        <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
            <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
            <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
                <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
                <mx:Label x="125" y="78" text="Label"/>
                <mx:Label x="125" y="103" text="Label"/>
                <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
                <mx:Label x="45" y="78" text="Label"/>
                <mx:Label x="45" y="103" text="Label"/>
            </mx:Panel>
        </mx:Panel>
        <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
         </mx:states></mx:Application>

    I know it's been a while but… did you fix this?
    It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
    Carlos

  • Need to do a remote wipe of my iphone - stolen 24 hrs ago and . Need urgent help on this. Thanks - Pinaki

    Need to do a remote wipe of my iphone - stolen 24 hrs ago  Need urgent help on this. Thanks - Pinaki
    < Personal Information Edited By Host >

    Follow the steps in this article:
    iCloud: Erase your device
    Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
    Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
    In the device’s Info window, click Erase [device].
    To erase:
    An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased.

Maybe you are looking for