Help required - How to flush memory for XML files ?

Hi,
I am receiving files with filenames like FILE_001.xml, FILE_002.xml, etc. all with the same XML format.
I need to process each file by order of their filename and load them into the same table.
I created a loop that renames each file to a standard filename, FILE.xml , and load into the table.
However, when I process the 2nd file ie. FILE_002.XML to FILE.xml, the data in FILE_001.xml is loaded again. The data in FILE_001.XML still exists in memory.
Need your advice how to get pass this problem.
Thanks.
Philip

Hi Philip,
You can use a TRUNCATE SCHEMA command on the XML Logical schema to remove the content previously loaded and then a SYNCHRONIZE FROM FILE to load the content of the new file in the backend. Refer to the XML Driver documentation in the ODI Documentation Library (Detailed Drivers Command).
These commands should be included in an ODI procedure that you can use in your loop.
Thanks,
Julien

Similar Messages

  • How to write POJO for XML file.. i do not want to use JAXB or any other tec

    How to generate POJOs for the specific xml files.
    Each XML file will have elements name with Type. Which in turn related to some other xml file
    For example
    student.xml
    <student name"mystudent">
    <studentname type="firstname"/>
    <studentname type="firstname"/>
    <studentname type="firstname"/>
    </student>
    firstname.xml
    <studentname name="firstname">
    <stufirstname type="myfirstname"/>
    </studentname>
    myfirstname.xml
    <myfirstname name="myfirstname">
    <myname1>xxx</myname1>
    </myfirstname>
    like this there will be so many xml files interlinked.
    I would like to write POJOs for these xml files
    please let me know what is the best way to write (design the hirarchy of these xml files
    Thanks in advance
    srinivas

    Not at this time. You may submit your polite feedback to Apple using this webpage: http://www.apple.com/feedback/itunesapp.html

  • Help required to understand the concepts for data files in tablespace

    Hi Guys!
    Conceptual understanding for data files.
    A tablespace is having 2 datafiles.
    What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
    Do we require to make the oldest file offline and move outside the environment?
    Thanks

    782790 wrote:
    Hi Guys!
    Conceptual understanding for data files.
    A tablespace is having 2 datafiles.
    What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
    Do we require to make the oldest file offline and move outside the environment?
    ThanksIf the datafiles are full, there is not much that you would get from the "defragmentation" of the datafiles. It would be sort of like this in the start,
    FFFFFFFFFFFFFFFFFFFFFFFFFF
    Then it will be ,
    FFFFFFFUUUUUFFFFFUUUUUU
    So what you are going to get is something like this, (if would be done),
    FFFFFFFFFFFFFUUUUUUUUUU
    So that's how the datafile would like. But that won't give you much of the space anyways still. The option to add a storage must be there with you. The file being offline wont take away the space that it has already allocated. And moreover, doing so, would also impact the access to the data that it would be storing within it.
    HTH
    Aman....

  • Tags Help!  How do I edit my xml file?  Where do I find my xml file?

    I understand I have to edit tags to provide more information to iTunes, but how? Where to begin?

    http://www.podcast411.com/howto_1.html
    Here is a tutorial that breaks down what is needed in your RSS feed and why both for the RSS specs and the iTunes specs.
    Per finding your RSS feed - what service are you using? Also what is your iTunes page?
    Rob @ podCast411

  • How to add payment advice for XML file filed in vendor account group

    Hi All,
    I have a requirment to add Payment advice for XML file field in vendor account group under payment transcation tap,
    kindly advice where i can add above mention field in vendor account group.
    thanks
    khaja

    done

  • How to increase memory for building project using ant in ECLIPSE

    Hi All,
    for all java projects and java applications in eclipse i am giving -Xms and -Xmx to increase heap memory.
    But the same failed when i run ant. it says Out of Memory Error.eventhough i had 1GB ram in system.
    How to increase memory for Building through ANT.
    Thanks,
    J.Kathir

    even if this is not a eclipse forum
    In the package explorer view or navigator view right click on the build file select "Run as / Ant Build ...". On the JRE Tab you can enter the VM Aguments like -Xmx512m
    Consult the java dokumentation how to set the memory of the jvm.

  • HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

    Hi, I need help on how to update software for my ipad1, can someone help me?

    The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • How do I create individual xml files from the parsed data output of a xml file?

    I have written a program (DOM Parser) that parses data from a XMl File. I would like to create an individual file with the corresponding name for each set of data parsed from the xml document. If the parsed output is Single, Double, Triple, I would like to create an individual xml file (Single.xml, Double.xml, Triple.xml)with those corresponding names. How do I create the xml files and give each file the name of my parsed data output? Thanks in advance for your help.
    import java.io.IOException;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.xml.sax.SAXException;
    public class MyDomParser {
      public static void main(String[] args) {
      DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
      try {
      DocumentBuilder builder = factory.newDocumentBuilder();
      Document doc = builder.parse("ENtemplate.xml");
      doc.normalize();
      NodeList rootNodes = doc.getElementsByTagName("templates");
      Node rootNode = rootNodes.item(0);
      Element rootElement = (Element) rootNode;
      NodeList templateList = rootElement.getElementsByTagName("template");
      for(int i=0; i < templateList.getLength(); i++) {
      Node theTemplate = templateList.item(i);
      Element templateElement = (Element) theTemplate;
      System.out.println("Template" + ": " +templateElement.getAttribute("name")+ ".xml");
      } catch (ParserConfigurationException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (SAXException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (IOException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();

    Ive posted the new code but now I'm getting a FileAlreadyExistException error. How do I handle this exception error correctly in my code?
    import java.io.IOException;
    import java.nio.file.FileAlreadyExistsException;
    import java.nio.file.Files;
    import java.nio.file.Paths;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.xml.sax.SAXException;
    public class MyDomParser {
      public static void main(String[] args) {
      DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
      try {
      DocumentBuilder builder = factory.newDocumentBuilder();
      Document doc = builder.parse("ENtemplate.xml");
      doc.normalize();
      NodeList rootNodes = doc.getElementsByTagName("templates");
      Node rootNode = rootNodes.item(0);
      Element rootElement = (Element) rootNode;
      NodeList templateList = rootElement.getElementsByTagName("template");
      for(int i=0; i < templateList.getLength(); i++) {
      Node theTemplate = templateList.item(i);
      Element templateElement = (Element) theTemplate;
      System.out.println(templateElement.getAttribute("name")+ ".xml");
      for(int i=0; i < templateList.getLength(); i++) {
      Node theTemplate = templateList.item(i);
      Element templateElement = (Element) theTemplate;
      String fileName = templateElement.getAttribute("name") + ".xml";
      Files.createFile(Paths.get(fileName));
      System.out.println("File" + ":" + fileName + ".xml created");
      } catch (ParserConfigurationException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (SAXException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      } catch (IOException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();

  • How to extract data from XML file with JavaScript

    HI All
    I am new to this group.
    Can anybody help me regarding XML.
    I want to know How to extract data from XML file with JavaScript.
    And also how to use API for XML
    regards
    Nagaraju

    This is a Java forum.
    JavaScript is something entirely different than Java, even though the names are similar.
    Try another website with forums about JavaScript.
    For example here: http://www.webdeveloper.com/forum/forumdisplay.php?s=&forumid=3

  • How can I pass a xml file to the webservice?

    Hello friends,
    How can I pass the XML file to any webservice API ?
    I have all the inputs of API in to the XML file.
    Please note:- I don't intend to do any .NET or Java coding to populate the data in the objects .Instead I plan to input the data to the webservice direcly from the XML file required schema.
    If necessary I can use Oracle Bpel process manager for it.
    Thanks and regards
    Ram Krishna Tripathi
    [email protected]

    Well, I've used it (or rather: tried it); did not/could not find the many options to export at a nearly lossless conversion for HD footage (hence my disclaimer "don't know"). Here is a screenshot of the Handbrake options:
    And here are the choices and settings from MPEG Streamclip:
    Maybe not empirical, but enough for me to have an opinion.

  • How to add support for new file type.

    Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
    I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
    I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
    Thank you

    Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
    Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
    CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
    LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
    I have done this but still not able to recognize the new file type.
    At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
    extension.xml
    <?xml version="1.0" encoding="windows-1252" ?>
    <extension xmlns="http://jcp.org/jsr/198/extension-manifest"
               id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
               rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
        <name rskey="EXTENSION_NAME">My Code Editor</name>
        <owner rskey="EXTENSION_OWNER">Me</owner>
        <dependencies>
            <import version="10.1.3">oracle.jdeveloper</import>
        </dependencies>
        <hooks>
            <jdeveloper-hook>
                <addins>
                    <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
                </addins>
            </jdeveloper-hook>
            <feature-hook>
                <description>My Code Editor</description>
                <optional>true</optional>
            </feature-hook>
            <document-hook>
                <documents>
                    <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                        <suffix>my</suffix>
                        <suffix>MY</suffix>
                    </by-suffix>
                </documents>
            </document-hook>
            <editor-hook>
                <editors>
                    <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                        <name rskey="EXTENSION_NAME">My Editor</name>
                    </editor>
                    <mappings>
                        <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">         
                            <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                       preferred="true"/>
                            <open-with editor-class="javax.ide.editor.CodeEditor"/>
                        </mapping>
                    </mappings>
                </editors>
            </editor-hook>
        </hooks>
    </extension>
    public class MyAddin implements Addin {
        public static final String MY_EXTENSION = "my";
        public void initialize() {
            System.out.println("MyEditor Constructor");
            new MyLanguageModule();
            Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
            CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
            LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
    }I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
    Todd

  • How can i transfer the xml files between different systems?

    hello
    the appearance of xml enable the inter-communication between differences systems.but
    i don't know how,such as following scinario:
    in the client side,we use the console that is written by using c#,if i finish
    filling the text boxes that are within the console,click the submit button,the
    console will generate a xml format document.i want the other application that
    is written by using jsp and servlet and deployed in weblogic server to receive
    the xml document,then process the document.
    but i don't know how i can transfer the xml files between the two applications
    that is written in different languages? can i use http protocol?
    thanks for any helps!

    Yes, you can use the HTTP protocol as a transport for the XML message, this
    is basically what the HTTP binding for SOAP does. The key is using a
    packaging mechanism that different applications will understand, otherwise
    only your own applications will know how to extract and process the XML
    messages you send between them.
    "zbcong" <[email protected]> wrote in message
    news:3e68318e$[email protected]..
    >
    hello
    the appearance of xml enable the inter-communication between differencessystems.but
    i don't know how,such as following scinario:
    in the client side,we use the console that is written by using c#,if ifinish
    filling the text boxes that are within the console,click the submitbutton,the
    console will generate a xml format document.i want the other applicationthat
    is written by using jsp and servlet and deployed in weblogic server toreceive
    the xml document,then process the document.
    but i don't know how i can transfer the xml files between the twoapplications
    that is written in different languages? can i use http protocol?
    thanks for any helps!

  • How to retrieve data from xml file into obiee reports

    Hi all,
    I've got a situation here. A xml file is stored as blob in oracle database table. Now i need to retrieve data/info from that xml file into obiee reports. How am i supposed to proceed with this ?

    I will go for a table function:
    http://gerardnico.com/wiki/database/oracle/table_function
    In two words, you can create a function that behave as a table. Then you create a function to pick up your xml, you parse it and you send back the rows.
    I know that Oracle has also a library for XML files but I never use it until now.
    Success
    Nico

  • How to retrieve value from xml file

    hi all,
    can somebody pls tell me how to retrieve value from xml file using SAXParser.
    I want to retrieve value of only one tag and have to perform some validation with that value.
    it's urgent .
    pls help me out
    thnx in adv.
    ritu

    hi shanu,
    the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
    pls have a look at the following code snippet.
    public class XMLValidator {
    static ArrayList strXXX = new ArrayList();
    public void validate(){
    factory.setValidating(true);
    parser = factory.newSAXParser();
    //all factory code is here only
    parser.parse(xmlURI, new XMLErrorHandler());     
    public void setXXX(String pstrXXX){          
    strUpn.add(pstrXXX);
    public ArrayList getXXX(){
    return strXXX;
    class XMLErrorHandler extends DefaultHandler {
    String tagName = "";
    String tagValue = "";
    String applicationRefNo = "";
    String XXXValue ="";
    String XXXNo = "";          
    XMLValidator objXmlValidator = new XMLValidator();
    public void startElement(String uri, String name, String qName, Attributes atts) {
    tagName = qName;
    public void characters(char ch[], int start, int length) {
    if ("Reference".equals(tagName)) {
    tagValue = new String(ch, start, length).trim();
    if (tagValue.length() > 0) {
    RefNo = new String(ch, start, length);
    if ("XXX".equals(tagName)) {
    XXXValue = new String(ch, start, length).trim();
    if (XXXValue.length() > 0) {
    XXXNo = new String(ch, start, length);
    public void endElement(String uri, String localName, String qName) throws SAXException {                    
    if(qName.equalsIgnoreCase("XXX")) {     
    objXmlValidator.setXXX(XXXNo);
    thnx & Regards,
    ritu

  • How I can create a XML file from java Aplication

    How I can create a XML file from java Aplication
    whith have a the following structure
    <users>
    <user>
    <login>anyName</login>     
    <password>xxxx</password>
    </user>
    </users>
    the password label must be encripted
    accept any suggestion

    Let us assume you have all the data from the jsp form in an java bean object..
    Now you want a xml file. This can be acheived in 2 ways
    1. Write it into a file using java.io classes. Say you have a class with name
    write("<name>"+obj.getName+</name>);
    bingo you have a flat file with the xml
    2. Use data binding to do the trick
    will recommend JiBx and Castor for the 2nd option
    Regards,
    Rajagopal

Maybe you are looking for