Help required in Exec_Sql Package
Hi,
Plz help me in this program unit
<PRE>
BEGIN -- obtain the default connection and check that it is valid
connection_id := EXEC_SQL.DEFAULT_CONNECTION;
bIsConnected := EXEC_SQL.IS_CONNECTED;
IF bIsConnected = FALSE THEN
P_Alert('No primary connection. Please connect before retrying.');
END IF; --
cursorID := EXEC_SQL.OPEN_CURSOR;
sqlstr := 'select emp_no from Hr_Employee';
EXEC_SQL.PARSE(cursorID, sqlstr, exec_sql.V7);
-- EXEC_SQL.DEFINE_COLUMN(cursorID,1,V_Emp_Id);
nIgn := EXEC_SQL.EXECUTE(cursorID);
LOOP
IF (EXEC_SQL.FETCH_ROWS(cursorID) > 0) and i <= 5 THEN
EXEC_SQL.COLUMN_VALUE(cursorID, 1, V_EMP_ID);
P_ALERT(V_EMP_ID);
ELSE
RAISE FORM_TRIGGER_FAILURE;
END IF;
END LOOP;
EXEC_SQL.CLOSE_CURSOR(cursorID);
EXEC_SQL.CLOSE_CONNECTION;
End </PRE>
The Problem is it is raising the exception. It is not displaying the emp_id.
the other one is with "EXEC_SQL.DEFINE_COLUMN(cursorID,1,V_Emp_Id);
" I'm facing the error too many declaration with this statement.
Thanks in advance.
Regards,
Alok
Hello,
<p>Have you read this article?. It contains code that queries the EMP table with the EXEC_SQL package.</p>
Francois
Similar Messages
-
Hi all,
With an intention to sun some sample programmes for JAXM, I have downloaded "JavaTM Web Services Developer Pack 2.0" from Sun's website, but unfortunately I couldn't find the package javax.xml.messaging. Can someone help findout where's this package available ?
Thanking you in advance and looking forward to immediate response.
Regards/Sim.Hi,
The jar file jaxm-api.jar contains the package javax.xml.messaging.
Make sure you have correctly set it to your classapth.
-Amol -
EXEC_SQL Package With Ora-306500 error
I write this pl/sql and the Ora-306500 and i dont know where is the error
declare
con1 exec_sql.conntype;
cur1 exec_sql.curstype;
nign2 PLS_INTEGER;
begin
con1:= exec_sql.open_connection('user1/pass@server');
cur1:= exec_sql.open_cursor(haj3_con con1);
exec_sql.parse(con1,cur1,'begin create table user1.x as select * from user2.y; end;' , exec_sql.v7);
-- and i try this also
--exec_sql.parse(con1,cur1,'create table user1.x as
--select * from user2.y' , exec_sql.v7);
nign2 := exec_sql.EXECUTE(con1,cur1);
exec_sql.close_cursor(con1,cur1);
exec_sql.close_connection(con1);
end;
so plz anybody can help me??Hi,
write and exception-handler where you capture the EXEC_SQL.Package_Error exception and then show the last error raised by the exec_sql package.
eg.
BEGIN
EXCEPTION
WHEN EXEC_SQL.Package_Error THEN
MESSAGE('Code: ' || EXEC_SQL.Last_Error_Code || ' Msg: ' || EXEC_SQL.Last_Error_Mesg || ' Position: ' || EXEC_SQL.Last_Error_Position );
END;
Patrick -
XSLT mapping Help Required.
XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHARHi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
xmlns:ns1="http://XYZ.com/Test">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
/ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat -
Urgent help required: Query regarding LC Variables
Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AMLC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type. -
Help required - Sales order item is partially delivered but the item grayed
I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radhahi Radha, how are you ?
---the partial deliveries in master data must have not been mentioned.
---the deliveries should be upto target quantity.
---check order type, item category and schedule line category.
---check unrestricted stock availability.
thank you
regards
Khera. -
I need help to run this package and i got some error
create or replace
PACKAGE BODY SUBS_INS_API_sun
AS
PROCEDURE SUBSCRIBER_INS_sun
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidactdvcdetailsobj_sun,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
pragma exception_init(Input_Parameter_Is_Null,-2000);
prepaidAccountDetails prepaidActDevDetails_tab:= prepaidActDevDetails_tab(NULL,NULL,NULL,NULL,NULL);
STATUS VARCHAR2(1):='1';
cust_no VARCHAR(10);
m_mac_id VARCHAR2(20);
subscriber_master_Rec subscriber_master%ROWTYPE :=NULL;
flg NUMBER(1);
BEGIN
IF(Source_Sys_Id IS NULL OR Tracking_Id IS NULL OR ACCOUNT_NO IS NULL OR prepaidAccountDetails.LAST=0) THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
select cm_cust_no into cust_no from customer_master where cm_cust_id=ACCOUNT_NO and cm_status in('A','P','0');
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:='0';
END;
BEGIN
FOR i IN prepaidAccountDetails.FIRST .. (prepaidAccountDetails.LAST) LOOP
prepaidAccountDetails1:=prepaidActDevDetails_tab(i);
prepaidAccountDetails1.Status_of_device:='1';
IF (prepaidAccountDetails.Account_id is NULL OR prepaidAccountDetails.Mac_Id is NULL or prepaidAccountDetails.LOB_value is NULL) THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF(prepaidAccountDetails.LOB_value = 'VDO') THEN
IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
END IF;
begin
select 1 into flg from subscriber_master where pm_phone_no=prepaidAccountDetails.Mac_Id and pm_status in('P','0','A','B');
EXCEPTION
WHEN NO_DATA_FOUND THEN
flg:=0;
END;
if(flg=1) then
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
begin
select md_mac_id into m_mac_id from mac_details where md_mac_id=prepaidAccountDetails.Mac_Id and md_start_date<=sysdate
and md_status='A';
EXCEPTION when OTHERS then
Error_code :='SI004';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
end;
if(STATUS= 1 and prepaidAccountDetails.Status_of_device='1') then
SELECT PM_SUBS_ACT_NO_SEQ.nextval
INTO subscriber_master_rec.PM_SUBS_ACT_NO
FROM dual;
subscriber_master_Rec.pm_phone_no :=prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date :=sysdate;
subscriber_master_rec.pm_status :='P';
subscriber_master_rec.PM_CUST_LVL_YN:='S';
subscriber_master_rec.PM_EQUP_CODE:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_HOME_AREA:='HOM';
subscriber_master_rec.PM_USG_CODE:='USG';
subscriber_master_rec.PM_NO_TYPE:='S';
subscriber_master_rec.PM_TCG_CODE:='DEF';
subscriber_master_rec.PM_APLN_DATE:=sysdate;
subscriber_master_rec.PM_USER2:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_USER3:=prepaidAccountDetails.Channel_Line_Up;
subscriber_master_rec.pm_cust_no:=cust_no;
INSERT INTO subscriber_master VALUES subscriber_master_rec;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_sun;
END SUBS_INS_API_sun;
and
i got this error
Package Body PREPAID_TESTNEW.SUBS_INS_API@PREPAID_TESTNEW
Error(73,4): PL/SQL: Statement ignored
Error(73,99): PLS-00302: component 'LAST' must be declared
Error(87,6): PL/SQL: Statement ignored
Error(87,37): PLS-00302: component 'FIRST' must be declared
please help to run this package if anyone knowsnow i corrected my package. It working fine. But, how to run this package via procedure. my procedure check below. I give all the details about my package check below.
---pkg specification
create or replace
PACKAGE SUBS_INS_API_SS
IS
PROCEDURE SUBSCRIBER_INS_SS
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2);
END SUBS_INS_API_SS;
-----pkg body
create or replace
PACKAGE BODY SUBS_INS_API_SS
AS
PROCEDURE log_error (ip_code IN VARCHAR2,
ip_message IN VARCHAR2,
ip_description IN VARCHAR2)
IS
BEGIN
INSERT INTO ERR_LOG (IEL_REF_ID,
IEL_DATE,
IEL_CODE,
IEL_MSG,
IEL_DESC)
VALUES (IVRS_ERR_LOG_SEQ.NEXTVAL,
SYSDATE,
ip_code,
ip_message,
ip_description);
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END log_error;
PROCEDURE INSERT_WS_LOG (SOURCE_SYS_ID IN VARCHAR2,
STATUS IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_ID IN VARCHAR2,
MAC_ID IN VARCHAR2)
IS
ws_log_rec WS_LOG%ROWTYPE := NULL;
BEGIN
SELECT WS_LOG#REC#ID.NEXTVAL INTO ws_log_rec.rec#id FROM DUAL;
ws_log_rec.VER#ID := 1;
ws_log_rec.CRE#TS := SYSDATE;
ws_log_rec.wl_source := SOURCE_SYS_ID;
ws_log_rec.wl_status := Status;
ws_log_rec.wl_tracking_id := tracking_id;
ws_log_rec.wl_account_id := account_id;
ws_log_rec.wl_mac_id := mac_id;
INSERT INTO ws_log
VALUES ws_log_rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END INSERT_WS_LOG;
PROCEDURE REPLICO_DEV_INFO( Acc_id IN VARCHAR2, Mc_Id IN VARCHAR2,channel IN VARCHAR2,
LOB_VAL IN VARCHAR2, outlet1 IN VARCHAR2, kit_cod IN VARCHAR2,
serial_No IN VARCHAR2, shipperr IN VARCHAR2, estm_recived_date IN date)
IS
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
REC_ID NUMBER;
BEGIN
SELECT REPLICO_DEVICE_INFO_DET#RECID.nextval INTO REC_ID FROM dual;
Replico_device_info_det_Rec.REC#ID := REC_ID;
Replico_device_info_det_Rec.ACCOUNT_ID := Acc_id;
Replico_device_info_det_Rec.MAC_ID := Mc_Id;
Replico_device_info_det_Rec.CHANNEL_LINE_UP := channel;
Replico_device_info_det_Rec.LOB_VALUE := LOB_VAL;
Replico_device_info_det_Rec.OUTLET := outlet1;
Replico_device_info_det_Rec.KIT_CODE := kit_cod;
Replico_device_info_det_Rec.SERIAL_NUMBER := serial_No;
Replico_device_info_det_Rec.SHIPPER := shipperr;
Replico_device_info_det_Rec.ESTIMATED_RECIVED_DATE := estm_recived_date;
INSERT INTO replico_device_info_det
VALUES Replico_device_info_det_Rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END REPLICO_DEV_INFO;
PROCEDURE SUBSCRIBER_INS_SS (
SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
PRAGMA EXCEPTION_INIT (Input_Parameter_Is_Null, -2000);
prepaidAccountDetails prepaid_act_dvc_details_obj
:= prepaid_act_dvc_details_obj (NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL);
STATUS VARCHAR2 (1) := '1';
cust_no VARCHAR (10);
m_mac_id VARCHAR2 (20);
channel_lineup VARCHAR2 (25);
LOB_VALUE VARCHAR2 (25);
subscriber_master_Rec subscriber_master%ROWTYPE := NULL;
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
flg NUMBER (1);
plan_code VARCHAR2(10);
subs_aact_no NUMBER(20);
m_plan_code1 payment_transaction_history.TH_PLAN_CODE%type;
m_payment_mode1 payment_transaction_history.TH_PAYMENT_MODE%type;
pm_phone_no_cur subscriber_master.pm_phone_no%type;
pm_status_cur subscriber_master.pm_status%type;
pm_user2_cur subscriber_master.pm_user2%type;
pm_user9_cur subscriber_master.pm_user9%type;
pm_cust_no_cur subscriber_master.pm_cust_no%type;
pm_cust_1 subscriber_master.pm_cust_no%type;
cm_i customer_master.cm_status%type;
CURSOR subs_rec is select pm_cust_no, pm_phone_no, pm_status, pm_user2, pm_user9 from subscriber_master
where pm_cust_no = cust_no and pm_status= 'S';
BEGIN
IF ( Source_Sys_Id IS NULL
OR Tracking_Id IS NULL
OR ACCOUNT_NO IS NULL
OR prepaidActDevDetails_tab.LAST = 0)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
SELECT cm_cust_no
INTO cust_no
FROM customer_master
WHERE cm_cust_id = ACCOUNT_NO AND cm_status IN ('A', 'P', '0');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
ERROR_CODE := 'SI001';
log_error ('SI001',
SQLERRM,
'No Customer exist with Active or Pre Actiavted');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := '0';
END;
BEGIN
FOR i IN prepaidActDevDetails_tab.FIRST ..
(prepaidActDevDetails_tab.LAST)
LOOP
prepaidAccountDetails := prepaidActDevDetails_tab (i);
prepaidAccountDetails.Status_of_device := '1';
IF ( prepaidAccountDetails.Account_id IS NULL
OR prepaidAccountDetails.Mac_Id IS NULL
OR prepaidAccountDetails.LOB_value IS NULL)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF (prepaidAccountDetails.LOB_value = 'VIDEO')
THEN
/* Commented as channel lineup is not coming from the input request */
/*IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
log_error ('SI002', SQLERRM, 'Channel line up is mandatory for Video');
INSERT_WS_LOG(Source_Sys_Id,'F',Tracking_Id,Account_No,prepaidAccountDetails.Mac_Id);
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;*/
SELECT EC_CHANNEL_LINEUP
INTO channel_lineup
FROM ELIGIBLE_CUSTOMER
WHERE EC_CUSTOMER_NO = cust_no;
END IF;
BEGIN
SELECT 1
INTO flg
FROM subscriber_master
WHERE pm_phone_no = prepaidAccountDetails.Mac_Id
AND pm_status IN ('P', '0', 'A', 'B');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
flg := 0;
END;
IF (flg = 1)
THEN
ERROR_CODE := 'SI003';
log_error ('SI003',
SQLERRM,
'Customer Already Exist with given Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END IF;
BEGIN
SELECT md_mac_id
INTO m_mac_id
FROM mac_details
WHERE md_mac_id = prepaidAccountDetails.Mac_Id
AND md_start_date <= SYSDATE
AND md_status = 'A';
EXCEPTION
WHEN OTHERS
THEN
ERROR_CODE := 'SI004';
log_error ('SI004', SQLERRM, 'Invalid Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END;
select pm_cust_no into pm_cust_1 from subscriber_master where pm_cust_no = cust_no;
IF (STATUS = 1 AND prepaidAccountDetails.Status_of_device = '1')
THEN
SELECT DECODE (prepaidAccountDetails.LOB_value,
'HSD', 'HSD',
'VIDEO', 'VDO')
INTO LOB_VALUE
FROM DUAL;
OPEN subs_rec;
LOOP
FETCH subs_rec into pm_cust_no_cur, pm_phone_no_cur, pm_status_cur, pm_user2_cur, pm_user9_cur;
IF subs_rec%FOUND THEN
IF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = prepaidAccountDetails.outlet and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id
where pm_cust_no = pm_cust_no_cur and pm_user9 = prepaidAccountDetails.outlet;
select cm_status into cm_i from customer_master where cm_cust_no = pm_cust_no_cur;
IF( cm_i = '0')
THEN
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
END IF;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
ELSIF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = null and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id, pm_user9 = prepaidAccountDetails.outlet
where pm_cust_no = pm_cust_no_cur and pm_user9 = NULL;
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
ELSIF subs_rec%NOTFOUND THEN
SELECT PM_SUBS_ACT_NO_SEQ.NEXTVAL
INTO subs_aact_no
FROM DUAL;
subscriber_master_rec.PM_SUBS_ACT_NO := subs_aact_no;
subscriber_master_Rec.pm_phone_no :=
prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date := SYSDATE;
subscriber_master_rec.pm_status := 'P';
subscriber_master_rec.PM_CUST_LVL_YN := 'S';
subscriber_master_rec.PM_EQUP_CODE := LOB_VALUE;
subscriber_master_rec.PM_HOME_AREA := 'HOM';
subscriber_master_rec.PM_USG_CODE := 'USG';
subscriber_master_rec.PM_NO_TYPE := 'S';
subscriber_master_rec.PM_TCG_CODE := 'DEF';
subscriber_master_rec.PM_APLN_DATE := SYSDATE;
subscriber_master_Rec.PM_NAME := prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.PM_STAFF_id := '16';
subscriber_master_rec.PM_USER2 := LOB_VALUE;
subscriber_master_rec.PM_USER3 := channel_lineup;
subscriber_master_rec.pm_cust_no := cust_no;
subscriber_master_rec.PM_USER8 := 'Y';
INSERT INTO subscriber_master
VALUES subscriber_master_rec;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
END LOOP;
CLOSE subs_rec;
SELECT TH_PLAN_CODE,TH_PAYMENT_MODE
INTO m_plan_code1,m_payment_mode1
FROM PAYMENT_TRANSACTION_HISTORY
WHERE TH_CUSTOMER_NO = cust_no
AND TH_LOB = LOB_VALUE
AND TH_SUBSCRIBER_NO IS NULL;
IF(LOB_VALUE = 'HSD') THEN
IF(m_plan_code1 = 'SIKI') THEN
plan_code := 'SIKI';
ELSE
plan_code := 'KIT';
END IF;
ELSE
IF(m_plan_code1 = 'SIKT') THEN
plan_code := 'SIKT';
ELSE
plan_code := 'TV';
END IF;
END IF;
UPDATE PAYMENT_TRANSACTION_HISTORY SET TH_SUBSCRIBER_NO = subs_aact_no, th_writeback_status = 'Y' WHERE TH_CUSTOMER_NO = cust_no AND TH_PLAN_CODE = plan_code;
COMMIT;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_SS;
END SUBS_INS_API_SS;
--- type object
create or replace
TYPE prepaid_act_dvc_details_obj--prepaidAccountDeviceDetailsObj
AS OBJECT ( Account_id VARCHAR2 ( 25 )
, Mac_Id VARCHAR2 ( 25 )
, Channel_Line_Up VARCHAR2 ( 25 )
, LOB_value VARCHAR2 ( 25 )
, Status_of_device VARCHAR2 ( 25 )
, outlet VARCHAR2(25)
, kit_code VARCHAR2(25)
, serial_Number VARCHAR2(25)
, shipper VARCHAR2(25)
, estimated_recived_date date )
type---
create or replace
TYPE prepaidActDeviceDetails_tabobj as table of prepaid_act_dvc_details_obj
---- i need to run this package via separate procedure. but i don't know how to pass the variable. because the passing argument contain object tab variable. please help me.. give me suggestion or procedure to run this pkg. -
Search Help with in a serach help required in SRM 4.0
Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash KamathHi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic -
Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart
What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.
-
Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
KelvinOSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result. -
Help required in Weblogic 6 - Creation & Configuration of Web Application
Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
MoinForum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin -
Help required network configuration - Gateway route settings get erased on reboot.
Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 34.36.143.254 0.0.0.0 UG 0 0 0 eno16780032
34.36.140.0 0.0.0.0 255.255.252.0 U 0 0 0 eno16780032
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder. -
hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir -
Help required from JDeveloper Development Team.
HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again. -
Help required with (soundcard) connection / settings, thanks in advan
Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.
Maybe you are looking for
-
Can you set a time range in the wiki calendar?
I think the wiki calendar is a great feature in 10.5 Server, however I am annoyed by one problem. I can't figure out a way to limit the time on a wiki to say 8am to 5pm. I would like to use this as a class calendar page on the wiki, but it is really
-
Problems with Live! Platinum 5.1 and Megaworks 5.1 550
I follow the connectivity diagram present on 550 multimedia speaker system but the center speaker doesn't works. In the surround mixer is present only the four speaker option and the advanced settings as central speaker volume or subwoofer volume are
-
How do I get Adobe to scan from the feeder on a Dell 3115cn printer?
How do I get Adobe to scan from the feeder on a Dell 3115cn printer?
-
How do i get rid of a firewall Alert jamming Safari?
how do i get rid of a firewall Alert jamming Safari?
-
Asking for username & password when trying to download podcast
i am trying to download a new podcast to which I have been subscribing for the last year or so and it is asking me for a username and password. I have just recently updated my username for my ADSL login and am not sure whether this would be the reaso