Help setting up my hosting.

How in the world do I set up web hosting? I have a friend that sells hosting packages but doesn't know if iWeb will work with it.

What kind of hosting is Cpanel? Where do you get it from?
To get hosting, as I have said before, you have to go and purchase a hosting package from somewhere like GoDaddy or HostExcellence or some other hosting company that sells hosting space - you should select a Unix package rather than a windows package.
I suggest that you have a look at http://www.godaddy.com and select and purchase a hosting package from here - they are a reliable source.

Similar Messages

Setting up Virtual Hosts on a Snow Leopard Development Server

Hi Everybody,
I'm losing hair over this - I thought it would be simple!
I have set up a Mac Mini Server running SLS and would like to host multiple websites for development on the internal network. I require the websites to be stored anywhere on the server, not just in Library/WebServer/Documents/. Ideally, I would like to access them by example.com/mynewsite so I don't have to mess around with DNS.
Currently I'm setting up websites in the Server Admin Web panel but it just doesn't work. I've noticed the error log keeps looking for files located in the Library/WebServer/Documents/ folder even though I have specified a different folder.
What Am I missing? Does anybody know of a tutorial / guide to point out potential issues when setting up virtual hosts? I have checked Apple's guide but it doesn't really help me. Any pointers would be much appreciated!
Cheers

Sites is likely failing here because Sites is based on the DNS and on the HEAD command within the http stream; if the DNS does not match, you won't get to the host, and if the HEAD command doesn't match the entry in the site, then you'll either get the * wildcard or (if no *) you won't be transferred to the target Site.
Check the web server logs, as a start.
If you want to see how this stuff works at the protocol level, you could telnet to port 80 and toss a http 1.1 GET / command and see what you get back for a page.
Per [rfc2616|http://tools.ietf.org/html/rfc2616], this sequence looks like this:
+telnet www.example.com 80+
then:
+GET / HTTP/1.1+
+host: www.example.com+
followed by two presses of the return key, and where www.example.com is your target Site (virtual host) name.
Alternatives to using DNS and virtual hosts are port-based hosting (which is easy), and you can also use IP addresses to establish virtual hosts. The former is set up via the Sites stuff, with various other ports being used for the web servers. Ugly, but easy. The IP-based approach can get ugly fast, too.
If you get DNS going and aliases added, and all this goes away in a puff of greasy orange smoke.

Help setting up BTinternet email with Apple Mail

Hello everyone,
I need help setting up a btinternet email account with Apple's Mail sofware. I am setting it up on behalf of my aunt and uncles new macbook pro so I hope i get some solutions quick because Im leaving their place by the end of the weekend and I would love to have their email setup and teach them how to use it.
They have 2 btinternet email accounts, the first one they use alot as its their main email account which is currently setup on MS Outlook on their old computer. The secound one they use rarely and its not setup on MS Outlook.
Heres the problem, when I setup their main email account with apple mail, I have no problem creating the account however once created the inbox is empty - it does not load previous emails. It can send emails fine, if i send an email to the account using my personal email it will receive it but when I switch off the computer and switch it back on the mail box is empty. So I checked the email account by going to yahoo.co.uk and signing in - again even on the web page the mail box is empty.
I then setup the second btinternet email account on Apple Mail shockingly this works perfectly all the old emails got loaded up in mail. So how do I do this for the main account, I know the difference is Outlook mail but I rather not delete that because if it doesnt work then they would lose all their old emails.
Please help
Thanks in advance
PS: ive setup my hotmail and yahoo accounts and they all work fine by the way

Please guys give me something or any random ideas u may have. im running out of time.

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Help setting up my new IPod Touch on iTunes on windows 7 64bit

Hello there,
I need help setting up my new IPod Touch to my Itunes 10 application on a PC running windows 7 64bit. I have watched the tutorial on how to do it but what the tutorial says it is supposed to do is not what is happenning for me:
1. In the tutorial it tells you to connect your ipod to your computer, then, (if it is for the first time) when the ipod appears and is selected, a window will come up allowing you to name your ipod, and begin selecting the options you wish to use.
I did as instructed but quickly came against some technical issues.
My issues:
1-1: When I selected the new iPod Touch for the dirst time I got an error message.
A) This was quickly fixed once I calld up apple support on the phone (turns out an IE browser setting was blocking it.)
1-2: With that fixed I selected my iPod Touch again but instead of the window indicated by the tutorial, I instead got an iPod registration form window.
1-3: I filled out the form and pressed the submit button (thinking everything was fine), then a new window came up that looks like this:
Free Find My iPhone
Free Find My iPad
Free Find My iPod touch
Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. _Learn More_
_Set up Find My iPhone_
_Not Now_ _Set up Find My iPad_
_Set up Find My iPod touch_
Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries. "
The first three lines and the first paragraph are indented as if there should be some type of graphic there, but it is missing. The underlined words indicate that they are supposed to be links, but they don't go anywhere, they are broken!
Now wheenever I connect my iPod Touch and select it the above window comes up and nomatter what I try it will not move or change.
Please help!
MSRankin

Try setting up the device in a new user account. or visit register.apple.com and verify your device is registered

Need Help Setting Up a new Network ..

Hello
Newbie question, I am attempting to setup a small home network, where I want three WLANS
Main
Guests
Kids
I want to set up different policies for these three networks.
I want the Kids to be able to access the Media server and other network devices, but limit the internet access. I want guest network to not be able to see the other two networks.
I have an ISA550 Firewall a 2504 Wireless Controller and a SG300-28P Switch.
I did manage to setup the Vlans on the ISA550 - Default as 192.168.75.x , Guest as 192.168.25.x and Kids as 192.168.35.x
From here on - I would need some help setting it up the right way, Please help.
Thanks

rmunoz274 wrote:
I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
thanks!!
i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
as far as the AEBS is concerned, you did not use it in bridge mode at all?
i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
thanks, and yaeh last time my network took me a bit of time as well!!
what kind of encryption are you running?
thanks

Need help setting up TV equiptment

I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

blondeinneed wrote:
I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
Teresa,
I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

Need help setting up and configuring rsync

Hello
I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
Here is what I would like to:
- I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
- The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
- this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
- hopefully this makes sense??
Any help is greatly appreciated!
Thanks

It's a lofty but unrealistic goal. Rsync does not run automatically. There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
If you must do this with rsync then I suggest a Google search for rsync tutorials.

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

My email is not working in lightroom. Need help setting that up.

Need help setting up my email in lightroom. For some reason it's not connecting.

Try posting in the Lightroom forum. People there are more tuned in to the detail working of the application:
http://forums.adobe.com/community/lightroom?view=discussions

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Modular JavaHelp? Can the Merge function cope with non-existent help sets?

We are writing a universal application which is intended eventually to manage perhaps 20 different pieces of our equipment. There will be a skeleton/umbrella application that is always present, and each customer will receive plug-in modules for the pieces of equipment they buy.
We want the help system to seamlessly display all and only the modules that are present, indexed and made searchable; without mentioning others that are not present.
My predecessors here were convinced that JavaHelp could cope with that. I don't see how.
Three of the twenty modules are ready to go now, and I don't know what to do about the 17 or so that are missing. Do I add them to the main help set via the merge function using ficititous names and locations which then have to be recorded for posterity so the other modules when they are issued will know what to call their help and where to put it? If I don't add their names now, how will the main help set know when and if they show up?
TIA for any advice and suggestions you have.
Alfred B. Stansbury

We are doing something similar. In our case, the skeleton app has a plugin extension point for help. Its a very simple extension point only specifying the path to a javahelp helpset. Any plugin modules that extend this extension point have those help sets loaded into the main skeleton help. Java helps merge capability makes this all possible.
Nick

Help Set IdeHelp not found - JavaHelp 2.0 (RC2)

Hi all,
I was trying to run IdeDemo with the following command (in the JH_HOME/demos/bin directory):
java -jar ideDemo.jarI got the "Help Set IdeHelp not found" message. I understand that the help set file is in the hsjar/idehelp.jar. Do I have do unjar it so that the ideDemo can pick it up? Thanks in advance.
Prudence

How to use IDEDemo.jar ?
1. unjar the .jar file hsjar/idehelp.jar.
2. run command "java -jar hsviewer.jar" in the JH_HOME/demos/bin directory.
3. select idehelp.hs file from the hsviewer dialog.
4. click "OK" button to preview IDEDemo.
If you are a JavaHelp newer, I suggest that you see the following demo first.
It is very good and simple.
http://www.pivotonic.com/jawahelpauthor/HelloJavaHelp.zip

Help setting up my hosting.

Similar Messages

Maybe you are looking for