Help with javascript function

I am getting a list of document urls from First Class by a
loop, and I need to know how to save the identity of the one in the
list that the user clicks on. I have tried many methods, but have
nearly succeeded, if only I can solve the following problem. I have
a javascript function called by the onclick method of <a
href>, and I have used ToScript to pass the identity on to the
next page. But I can't put the javascript variable into th
ecoldfusion array. Here's the script:
function getUrlNameFromLink(linkNumber){
<cfoutput>
var #toScript(XMLContent.rss.channel.item[3].link.xmlText,
"jsURL")#;
</cfoutput>
alert(jsURL)
This gives the correct link to the alert, if I hard-code the
3 into the bracket. How do I use the linkNumber variable
instead?

well, using AJAX, and if your cf array is stored in a
persistent scope
(i.e. session), you could actually do it...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Similar Messages

Help with stored function

Hi...I was wondering if I could get help with this function. How do i write a function to return hours between a begin date and an end date for an employee. Thanks so much

EdStevens wrote:
AlexeyDev wrote:
sb92075 wrote:
select (date2-date1)*24 from dual;not as above but as below
select (date2-date1)/24 from dual;date2-date1 is amount of days. Divide it by 24 and what? if you multiply it on 24 you will have a chance to know how many hours between these two dates. :-)Don't forget that a DATE type also includes a time component.I suppose it doesn't matter if you did a difference between two dates. The result is always number of days.

Problem saving Reader extended PDF created in Livecycle with Javascript functions built in

Afternoon
I have created an interactive PDF in Livecycle with built in Javascript functionality. I need users to be able to complete and save the PDF so have saved it as a Reader extended PDF. The problem I'm having is that when a user completes the form,saves it, and then opens it again the Javascript functionality is not showing despite showing the original selection that the user has made. The Javascript is simply a dropdown menu that will show a different table based on the selection so isn't anything major.
I've trawled forums and this is driving me mad so I'd appreciate some help.
I am using Adobe Pro XI.
Thanks in advance
Ben

At the moment I can't sorry. I've run the Javascript debugger in Adobe Pro and it seems there are some errors
Acrobat EScript Built-in Functions Version 11.0
Acrobat SOAP 11.0
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#subform[3]:#area[1]:Button1[0]:initialize
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#area[2]:Button1[1]:initialize
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#area[3]:Button1[2]:initialize
ReferenceError: Table is not defined
1:XFA:form1[0]:TextFieldContainer[0]:#area[4]:Button1[3]:initialize
Basically the form has been built in Livecycle Designer and have drop down menus that show or hide tables depending on the selection but when I Reader Enable the form and users make a selection and then save the form it is not showing the table when it is opened again.
I appreciate your help

Problem saving Reader extended PDF with Javascript functions built in

Afternoon
I have created an interactive PDF in Livecycle with built in Javascript functionality. I need users to be able to complete and save the PDF so have saved it as a Reader extended PDF. The problem I'm having is that when a user completes the form,saves it, and then opens it again the Javascript functionality is not showing despite showing the original selection that the user has made. The Javascript is simply a dropdown menu that will show a different table based on the selection so isn't anything major.
I've trawled forums and this is driving me mad so I'd appreciate some help.
I am using Adobe Pro XI.
Thanks in advance
Ben

http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com

Need help with effect / function stop!

Hi all!
I tried to build some kind of custom pop-up-menu with fade
in/out effect, however the menu sometimes (< very often, but not
always) disappears while the mouse is still over it.
So i defined a function to stop/abort the effects, but this
doesn't work right.
Could anybody please tell me, how to stop all functions,
while the mouse is over a link?
/// This is the container to appear / disappear:
<div id="navislide" style="height:292px;
overflow:hidden;">
<a href="mylink.html" onMouseOver="killall();"
onMouseOut="hideit();">mylink</a>
</div>
/// This is the link to show the container:
<a href="#"
onMouseOver="slidefadein.start();">mylink</a>
<script type="text/javascript">
function displayblock() {
var thediv = document.getElementById('navislide');
thediv.style.display= "block";
slidetimer = setTimeout('slidefadeout.start();', 2000);
hideit = function() {
slidetimer = setTimeout('slidefadeout.start();', 2000);
function displaynone() {
var thediv = document.getElementById('navislide');
thediv.style.display= "none";
killall = function() {
clearTimeout(slidetimer);
slidefadeout.stop();
slidefadein.stop();
displayblock();
slidefadeup.start();
var slidefadein = new Spry.Effect.Fade("navislide", {from:0,
to:100, toggle:false, setup:displayblock, finish:hideit});
var slidefadeout = new Spry.Effect.Fade("navislide",
{from:100, to:0, toggle:false, finish:displaynone});
var slidefadeup = new Spry.Effect.Fade("navislide",
{from:100, to:100, toggle:false});
</script>
Probably, its all about the "killall"-function, because when
the mouse moves over the link, the function to abort all other
effects, does not take effect.
Thank you so much vor any kind of help or hint!!
Cheers,
idefix

I would be most interested in a reply to this for I asked
weeks ago how to use an onClick stop() function for the links in my
page. I was given the stop function by VFusion (it is to stop
panels from rotating), but I could never figure out how to actually
get the function to stop the panels and could not get it no matter
what I tried, eventually had to take the panel rotation out.

Please help with Javascript obejcts hierarchy

Hi!
Is following Javascript obejcts hierarchy is right?
1. App > 2. Doc > 3. Page >
(from Page) > 3.1 Annotation3D
(from Page) > 3.2 Field (link)
thank u )

You have to have Acrobat/Reader open to open a PDF and use some or all of the Acrobat JS features.
When Acrobat/Reader is started various folders are accessed and files within those folders read and processed to create the application. This includes dictionaries, certain global variables, various functions provided by Adobe, and user defined functions or variables. The Adobe provided functions or user provided functions or variables are accessed by their assigned name. So if you created an application folder level function in a file called 'hello.js' containing the following code:
function HelloWorld()
app.alert('Hello World!');
return;
HelloWorld();
Each time you open Acrobat an alert box with "Hello World!" will appear. So even without any PDF open one can perform or have a task done. With application level scripts, you can add menu item, tool bar buttons, or modify menu items, etc. So when you open Acrobat you could have a menu item to create a new blank PDF or add the JS API Reference to the "Help" menu item. And if you selected "Help => JavaScript API', the JS API Reference file would open, whether there is an open PDF or not.
PDF files are opened at the application level, as the application needs to interpret the code of the PDF file and provide the necessary resources for displaying, calculating, linking, etc for the open PDFs. If you open a PDF pragmatically, you need to provide an object name to that PDF. Especially if you are going to reference that file with JavaScript.
Within an open PDF there are various actions. The first is the document level scripts that are used to establish the environment in which that PDF will function. This could include special functions to sum values, compute date differences, perform special key stroke and formatting. There can even be test to see if there are any necessary application level functions available for use the the document.
Within PDF document you can can fields, links, comments, etc. And these items only exist in the PDF document and rely on the PDF document for performing the various task or communicating those task the the application.
By the way with the "HelloWorld" function defined in the application JavaScirpt folder, and PDF opened on that computer can have a button with the 'mouse up' action JavaScript of "HelloWorld();" for the code and any time that button is pressed the alert box that appeared when Acrobat was started will appear. But if you take that PDF to another computer that does not have that file nothing will happen or an error box will appear.
See Getting Started - Developing for PDF by Dave Wright and look around the Planet PDF site.
You also need to realize that Acrobat JavaScript does not run synchronously, so you do not always have the individual scripts running in the same order or speed so it is possible a script will not always start and end before the next script in line is started or ends. And if you have dependencies between these scripts you need to test to see if they are all met.

Help with Javascript/Calculations

Hello,
Have a building use policy for school.
Need help with checkboxes and default values. I can get javascript/math to work when I click check box.
Someone wants to rent a room they check the rentRoom checkbox. Then the enter how many rooms 1,2,3 etc.. The value for the rentRoom checkbox is $25.
I can get it when the checkbox for rentRoom is selected the rentRoom.Total computes correctly. However, what I want is when the form opens up a default value of $0.00 to be in there. I also want if someone goes back and unchecks the rentRoom checkbox the value goes back to $0.00 not just blank. Right now I am getting the error the value entered does not match the value of the field. That is if I put the default value in options. Basically, I can't seem to figure out the javascript code to get this to work.
Am I asking for too much, can someone guide me to javascript to help me out.
I have tried if/then statements and switch statements. I just can't figure out how to get it to for lack of better a word - toggle back and forth.
If this is not possible please tell me. If it is too complicated tell me. I am not using livecycle for this as we had a word document and I just used the find form fields. I am also using Adobe Acrobat 8 Professional.
Thanks

Hello,
Thanks that looks good. I am still missing something but the calc doesn't work when I put in my variables. I will work with it more but nothing happens.
The one thing is I have the default value of the checkbox as 15 so don't know if that messes it up.
Right now I get the default value of $0.00 all the time. When I click on the check box on/off it doesn't do the calcs.
sorry, any more input, what am i missing??
I also changed the syntax error that was posted on your origianl post. You had == 'Off" I changed that to 'Off'

Need Help with Javascript for Acrobat Pro 9

Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!

Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

Help with ASO function

Hi all,
I need some help with ASO mdx function.
Avg({Leaves([Employees].Currentmember)}, [Calculated_Field]). This will give me the average for Calculated_Field for all levels of Employees. But i want to add more dimensions like Region and year.
Please advice how can I achieve this.
Thanks
Andy

you have to use cross join in order to add more dimension members to the formula.This will give you some idea
Re: Writing formula in Outline??????
Regards,
RSG

Help with showDocument() function

Hello,
I am trying to write a segment of code that will allow me to change the URL of a HTML frame, however, it is a different frame than that which contains the applet.... I have tried looking at the documentation for the showDocument function, but I cannot find anything that will allow me to specify the frame in which the document should be shown. Basically, I would like to know how, if you have 2 frames on a page, how to modify the top one from the bottom one when the bottom one is running an applet. Help is greatly appreciated, thanks beforehand.
Cheers

As an experiment, try to use a javascript function attached to a button that is in the same frame as the applet.
If that function does the trick (change the page displayed in the other frame), there are ways to call it from your applet (Search for "JSObject"). I propose the experiment first, because I don't know if javascript can do it, but I suppose it should.

Select tag with JavaScript function

I am using a selectOneMenu tag for navigation. After the selection I use a button to go to the selected page. I would prefer to go to the selected page without using an additional button. I think I have to use a JavaScript function with the attribute "onchange". How does this JavaScript function look like?

I use something like this, it works fine
<h:selectOneMenu id="selectedEndorsement" valueChangeListener="#{engageListServiceBean.changeEndorsement}" value="#{engageListServiceBean.selectedEndorsementNum}" onchange="submit()">

Please Please help with JavaScript and Actions

Hello!
Is there a way to perform a saved Action from the Action Pallette using a JavaScript script? I know there is a way to do it with Visual Basic.
Is there a way to run a Visual Basic script from a JavaScript script?(which could be a potential workaround if JavaScript CANNOT call on an Action)
Is there a way to call on a JavaScript from an Action?
Here's specific information on my problem:
I am using Illustrator CS2 on a PC
I have written all of the JavaScript scripts that I need to perform various layer selection procedures and they all work perfectly. I have placed them in the Presets > Scripts folder so that they appear in my file menu.
I wrote a very long action that called on these scripts (using Insert Menu Item > then selecting the script by going File > Scripts) sequentially and did some selecting and copy-pasting and applying graphic styles in between scripts. The Action worked PERFECTLY and ran all the scripts I needed to an automated a process that usually takes me an hour in less than five minutes!
I saved the actions and saved the file.
After closing Illustrator all of the lines of the action that called on scripts disappeared! It seems this is a known bug...I currently know of no workaround.
Can anyone help with any of the following things:
1. Getting actions to SAVE the commands to run javascripts
2. Writing a JavaScript that runs an Illustrator Action
3. Writing a JavaScript that runs a Visual Basic script that runs an Illustrator Action.
I spent three days learning the basics of JavaScript (mostly by trial and error) and successfully wrote all the scripts I needed...I was overjoyed! But now that I've closed illustrator my actions to run said scripts do not work. PLEASE ADVISE!!!
Thanks in advance,
Matthew

try next
1)if possible split JS-code into 2 parts (before/after action)
2)make vbs script with contents
Set appRef = CreateObject("Illustrator.Application.3")
appRef.DoJavaScriptFile("C:\my1.js")
appRef.DoScript(Action As String, From As String)
'add wait while ActionIsRunning
appRef.DoJavaScriptFile("C:\my2.js")
3) run vbs (File > Scripts or double-click).

I need help with Analytic Function

Hi,
I have this little problem that I need help with.
My datafile has thousands of records that look like...
Client_Id Region Countries
[1] [1] [USA, Canada]
[1] [2] [Australia, France, Germany]
[1] [3] [China, India, Korea]
[1] [4] [Brazil, Mexico]
[8] [1] [USA, Canada]
[9] [1] [USA, Canada]
[9] [4] [Argentina, Brazil]
[13] [1] [USA, Canada]
[15] [1] [USA]
[15] [4] [Argentina, Brazil]
etc
My task is is to create a report with 2 columns - Client_Id and Countries, to look something like...
Client_Id Countries
[1] [USA, Canada, Australia, France, Germany, China, India, Korea, Brazil, Mexico]
[8] [USA, Canada]
[9] [USA, Canada, Argentina, Brazil]
[13] [USA, Canada]
[15] [USA, Argentina, Brazil]
etc.
How can I achieve this using Analytic Function(s)?
Thanks.
BDF

Hi,
That's called String Aggregation , and the following site shows many ways to do it:
http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php
Which one should you use? That depends on which version of Oracle you're using, and your exact requirements.
For example, is order importatn? You said the results shoudl include:
CLIENT_ID COUNTRIES
1        USA, Canada, Australia, France, Germany, China, India, Korea, Brazil, Mexicobut would you be equally happy with
CLIENT_ID COUNTRIES
1        Australia, France, Germany, China, India, Korea, Brazil, Mexico, USA, Canadaor
CLIENT_ID COUNTRIES
1        Australia, France, Germany, USA, Canada, Brazil, Mexico, China, India, Korea?
Mwalimu wrote:
... How can I achieve this using Analytic Function(s)?The best solution may not involve analytic functions at all. Is that okay?
If you'd like help, post your best attempt, a little sample data (CREATE TABLE and INSERT statements), the results you want from that data, and an explanation of how you get those results from that data.
Always say which version of Oracle you're using.
Edited by: Frank Kulash on Aug 29, 2011 3:05 PM

Help with form function

Hi All,
I'm having problems gathering information from one form ('product') and placing it into another ('accepted') so that i can submit the information into an email using php. I need to retrieve the options chosen from the 'product' form and insert them into hidden fields within the 'accepted' form using java script. BUT im having problems getting it to work properly, can anyone please help me?
www.milesmemorials.com/product-GH54.html
<script type="text/javascript">
var colour2 = Number(document.forms.product.colour.value);
$("#colour2").val(colour2.toFixed(2));
var engraving2 = Number(document.forms.product.engraving.value);
$("#engraving2").val(engraving2.toFixed(2));
var font2 = document.forms.product.font.value;
$("#font2").val(font2);
var textarea2 = document.forms.product.textarea.value;
$("#textarea2").val(textarea2);
var engraved_designs2 = document.forms.product.engraved_designs.value;
$("#engraved_designs2").val(engraved_designs2);
var sandblasted_designs2 = document.forms.product.sandblasted_designs.value;
$("#sandblasted_designs2").val(sandblasted_designs2);
var grand_total2 = Number(document.forms.product.grand_total.value);
$("#grand_total2").val(grand_total2.toFixed(2));
var cemetery_name2 = document.forms.product.cemetery_name.value;
$("#cemetery_name2").val(cemetery_name2);
var cemetery_address2 = document.forms.product.cemetery_address.value;
$("#cemetery_address2").val(cemetery_address2);
var grave_number2 = document.forms.product.grave_number.value;
$("#grave_number2").val(grave_number2);
</script>

Ness_quick wrote:
Ok so the cart people (123 connect) who are writing the script for me have nothing to do with the proof part of the page. I just need to send all the selected details in an email to milesmemorials back office, without any involvement of cart or sagepay. As you stated earlier -
The problem with that in this particular senario is some of the information in form 2 is not contained in form 1 i.e., the name, email etc. I assume that this is because the checkout gateway collects this information. If the checkout is not used then this info cannot be collected
That is why i did it this way round, instead of having the one form. This is what the cart suppliers have emailed me with regards to how the website, cart and sagepage all integrate.
1: overview
to create an on-site order system to link into the shopping cart, the order system will store all the details of the order from each selected page
2: product page
we will provide you with the code to add to the page with full details of where on the page to put it, there will be a config part for you to amend so you can get the script to work with the specific page elements. For example if there are letters on the page then you make the letter script active, if there is a choice of stone type you simply make the stone type active.
3: cart page
this will keep a record of what the customer adds to the cart, when they are ready to checkout it will create a file to send to the shopping cart for payment
4: secure shopping cart
this is on a secure server and is PCI compliant, it adds on to the system above. This will take the order and link into your choice of payment provider, when complete it will email you and the customer with the order details. It will also keep a record of the order for eight weeks
That's why In this particular case, in my opinion, it's best to keep the proofing element and the cart element seperate as you don't have much control over what the cart script does being as though it's an off-the-shelf' solution as many of these payment gateway solutions are and require specific form attributes. It was pretty obvious to some from the outset that it did not require the name, email information etc as that would be added at the gateway stage. like 99% of payment gateways.
Given that you're now so close to a solution which works independently it's worth investigating if it is possible with javascript of jQuery to update the two forms in tandem as the fields change.

Set multiple items with javascript function in chart link

Hi Folks
I am able to use the javascript $s function to set the value of one item from a chart link. I need to pass values to multiple items.
Is there a way to use javascript function to pass values for multiple items on a page from a chart link
Appreciate your responses
Thanks
Gopal

Hi Arnau,
You need to surround your JavaScript code like this (without the spaces before and after script):
< script language="Javascript">
window.open("<%=ABAP_VARIABLE%>").focus();
</script >
Regards,
Patrick.

Help with javascript function

Similar Messages

Maybe you are looking for