Help with some fatal Terminal errors

Hello all,
I need some help, as I foolishly did some mistakes while working in Terminal.
I created a directory /~src and I coppied there all /Users.
When I realised that, I coppied the other way round.
What happens now is that:
-I cannot open any file in my computer
-all my Safary browsing passwords have been erased
-when I "Get Info" for any file in my Mac, I have /Users/mynme/myname twice
Please, could you give me a hand to repair this?
Thanks a lot.
Regards,
Mihaela

Hello dear mihaelapuica!
I did not understand exactly what you did. Could you explain again?
First your folder
/~src
which you created was probably:
~/src
means in your home folder a new folder with the name "src". Right?
And in this folder you copied all /Users - folders. Right? (That's a strange idea; why would you do that? But you did probably due to an error??? You cannot put all users into your home root folder without messing up all permissions and ownerships, because each user has his own settings.) So in your home folder forexample the ownership would be mihaela and the group would be staff. And the permissions would be drwxr-xr-x for your folders you own, and the files in it, would have the permissions of -rw-r--r-- or -rw------ or -rwx------
Ok. Then you copied it back. How you did it? Which command? Or in the Finder with drag and drop? In any case you put everything back, and the structure is as before???
Now I have the suspicion that you rebooted and the permissions and owner of the old user "myname" were wrong and you created a new user with "myname".
Do you have (hopefully) a back-up? I think it would be easier to make a clean install and start over again. Then you may import the Documents from your backup.
If this is not an option, you should read the manuals, how to repair the permissions. In the Terminal you would use commands like
chown (for changing owners and group)
and
chmod (for changing the permissions).
But please don't be angry, this is much too diffucult and dangerous for you. Only with a Unix expert being at your side.
Perhaps you are lucky in using a tool like OnyX to repair the owner and permissions. But I doubt.
Best greetings from Munich
marek

Similar Messages

  • Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

    Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

    Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
    Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
    Thanks,
    Hussein

  • Help with some beginner code

    Hello, I am new to java and I need a bit of help with some code that I'm writing. here is the code:
    import javax.swing.*;
    public class Test{
         public static void main(String[] args){
         JOptionPane.showMessageDialog(null,"We will now build a block with *'s","Block",1);
         String input=JOptionPane.showInputDialog(null,"Type a number: ","Number",3);
         int number=Integer.parseInt(input);
         int count=0; int count2=0;
         for(count2=0; count2<number; count2++){
              for(count=0; count<number; count++){
              System.out.print("* ");
    System.exit(0);
    }Now, all I need is to build a block of *'s with the number that the user inputs. With the code that I wrote I get the correct number of *'s but not in the form of a block. They just print out in a straight line. I know this is a very simple task but could someone please help me out? What do I need to modify in my code so that the *'s print out arranged as a block like so:
    **********

    Your code only uses the print method which prints without a carriage return/line feed. So you need to add a line of code to print a carriage return/line feed. Where? well that is your task to work out.

  • Need a little help with some errors.

    Receiving some errors..
    btn2.addActionListener(new ActionListener() {
    and also
    frame.setLocation(400,400);
    frame.setVisible(true);
    }<<~~has 2 errors here...
    Both above have class or interface expected errors..clueless on what i'm missing at the moment.
    Anyone mind pointing out what {'s and }'s i'm missing?
         btn1.addActionListener(new ActionListener() {
                             public void actionPerformed(ActionEvent evt) {
                                  btn1actions();
              private void btn1actions() {
                   if (radio1.isSelected()) System.out.println("Radio Button 1 is selected.");
                   if (radio2.isSelected()) System.out.println("Radio Button 2 is selected.");
         btn2.addActionListener(new ActionListener() {
                                       public void actionPerformed(ActionEvent evt) {
                                            btn2actions();
                        private void btn2actions() {
                             if (radio1.isSelected()) System.out.println("Radio Button 1 is selected.");
                             if (radio2.isSelected()) System.out.println("Radio Button 2 is selected.");
                   btn3.addActionListener(new ActionListener() {
                                       public void actionPerformed(ActionEvent evt) {
                                            btn1actions();
                        private void btn3actions() {
                             txt1.setText("");
                             txt1.requestFocus();
    public static void main(String[] args) {
        Test2 frame = new Test2();
        frame.setTitle("Test Frame");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(400, 300);
        frame.setLocation(400,400);
        frame.setVisible(true);
    }

    All my code..finally posted...just need help with more errors.
    F:\DocumentsTest2.java:169: ';' expected
              btn1.addActionListener(new ActionListener()) {
    ^
    F:\Documents\Test2.java:176: illegal start of expression
              private void btn1actions() {
    ^
    F:\Documents\Test2.java:191: illegal start of expression
              private void btn2actions() {
    ^
    F:\Documents\.java:202: illegal start of expression
              private void btn3actions() {
    ^
    4 errors
    Tool completed with exit code 1
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Test2 extends JFrame{
         static JButton btn1,btn2,btn3;
         static JTextField txt1;
         static JRadioButton radio1,radio2;
           public Test2() {
             Container container = getContentPane();
             container.setLayout(new BorderLayout());
              //Create Panels
                JPanel Panel1 = new JPanel();
                JPanel Panel2 = new JPanel();
                JPanel Panel3 = new JPanel();
                JPanel Panel4 = new JPanel();
                JPanel Panel5 = new JPanel();
                JPanel Panel6 = new JPanel();
                JPanel Panel7 = new JPanel();
                JPanel Panel8 = new JPanel();
                JPanel Panel9 = new JPanel();
                JPanel Panel10 = new JPanel();
              //Set Layout for Panels
              Panel3.setLayout(new BorderLayout());
              Panel4.setLayout(new BorderLayout());
              Panel5.setLayout(new BorderLayout());
              Panel6.setLayout(new BorderLayout());
              Panel10.setLayout(new BorderLayout());
              //Create the Various Fonts and Colors for this GUI
              Font font1 = new Font("SansSerif", Font.BOLD, 20);
              Font font2 = new Font("Serif", Font.PLAIN, 15);
              Color color1 = new Color(3,15,125);//A Dark Blue Color
              Color color2 = new Color(201,29,10);//A Red Color
              Color color3 = new Color(127,127,127);//A Grey Color
              //Create Buttons and Labels
             btn1 = new JButton("Submit");
             btn2 = new JButton("Display Schedule");
             btn3 = new JButton("Enter New Name");
             JLabel label1 = new JLabel("Student Name");
             JLabel label2 = new JLabel("Course Number");
              JLabel label3 = new JLabel("Welcome to the Java Community College");
              JLabel label4 = new JLabel("Registration System!");
              //Declare Text Field For Entering Student Names
              txt1 = new JTextField(15);
              //"Put Course Number from another Method Here"
              String[] courseStrings = { "CISM2230 A", "CISM2230 B", "CISM1110 A", "CISM1110 B", "CISM1120 A", "CISM1120 B" };
              JComboBox Combo1 = new JComboBox(courseStrings);
              //Declare Radio Buttons for Add and Drop Course
              radio1 = new JRadioButton("Add a Course", false);
              radio2 = new JRadioButton("Drop a Course", false);
              ButtonGroup radioButtons = new ButtonGroup();
              radioButtons.add(radio1);
              radioButtons.add(radio2);
              //Panel 10 is the Main Displaying Panel
              Panel10.add(Panel3, BorderLayout.NORTH);
              Panel10.add(Panel4, BorderLayout.CENTER);
              Panel10.add(Panel8, BorderLayout.SOUTH);
              //Panel 3 Used to Display Label 3 and 4 using Panels 1 and 2
              Panel3.add(Panel1, BorderLayout.NORTH);
              Panel3.add(Panel2, BorderLayout.CENTER);
              Panel1.add(label3);
             Panel2.add(label4);
              //Panel 4 Used to Display Student Name, Txt1, Course Number, Combo Box and Radio Buttons
             Panel5.add(label1, BorderLayout.NORTH);
             Panel5.add(txt1, BorderLayout.CENTER);
             Panel6.add(label2, BorderLayout.NORTH);
              Panel6.add(Combo1, BorderLayout.CENTER);
              Panel7.add(radio1, BorderLayout.NORTH);
              Panel7.add(radio2, BorderLayout.CENTER);
              Panel4.add(Panel5, BorderLayout.NORTH);
              Panel4.add(Panel6, BorderLayout.CENTER);
              Panel4.add(Panel7, BorderLayout.SOUTH);
              //Panel 8 Used to Display the Buttons
              Panel9.add(btn1, BorderLayout.CENTER);
              Panel9.add(btn2, BorderLayout.CENTER);
              Panel9.add(btn3, BorderLayout.SOUTH);
              Panel8.add(Panel9, BorderLayout.CENTER);
              //Setting Background, ForeGround and Font of all Text.
             Panel1.setBackground(color3);
             Panel2.setBackground(color3);
             Panel3.setBackground(color3);
             Panel4.setBackground(color3);
             Panel5.setBackground(color3);
             Panel6.setBackground(color3);
             Panel7.setBackground(color3);
             Panel8.setBackground(color3);
             Panel9.setBackground(color3);
             Panel10.setBackground(color3);
             btn1.setBackground(color3);
             btn2.setBackground(color3);
             btn3.setBackground(color3);
             radio1.setBackground(color3);
             radio2.setBackground(color3);
             btn1.setFont(font2);
             btn2.setFont(font2);
             btn3.setFont(font2);
             Combo1.setFont(font2);
             Combo1.setBackground(color3);
             Combo1.setForeground(color1);
             label1.setFont(font2);
             label2.setFont(font2);
             label3.setFont(font1);
             label4.setFont(font1);
             label1.setForeground(color2);
             label2.setForeground(color2);
             label3.setForeground(color1);
             label4.setForeground(color1);
             container.add(Panel10);
              //Setting Keyboard Shortcuts to Radio Buttons and Regular Buttons
              btn1.setMnemonic('S');
              btn2.setMnemonic('D');
              btn3.setMnemonic('E');
              radio1.setMnemonic('A');
              radio2.setMnemonic('C');
              //ActionListener
              btn1.addActionListener(new ActionListener()) {
                   public void actionPerformed(ActionEvent evt) {
                        btn1actions();
              private void btn1actions() {
                   if (radio1.isSelected()){ System.out.println("Radio Button 1 is selected. Button 1")};
                   if (radio2.isSelected()){ System.out.println("Radio Button 2 is selected. Button 1")};
              btn2.addActionListener(new ActionListener()) {
                   public void actionPerformed(ActionEvent evt) {
                                            btn2actions();
              private void btn2actions() {
                   if (radio1.isSelected()) System.out.println("Radio Button 1 is selected(Button 2).");
                   if (radio2.isSelected()) System.out.println("Radio Button 2 is selected.Button 2");
              btn3.addActionListener(new ActionListener()) {
                   public void actionPerformed(ActionEvent evt) {
                        btn1actions();
              private void btn3actions() {
                   txt1.setText("");
                   txt1.requestFocus();
         public static void main(String[] args) {
             JavaCollegeTest2 frame = new JavaCollegeTest2();
             frame.setTitle("Project 4");
             frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
             frame.setSize(400, 300);
             frame.setLocation(400,400);
             frame.setVisible(true);
    }

  • Help with some java work ... :(

    Hi, I was wondering can anyone here give me some help or show me the way with this programming assignment. This is my first week of programming in Java and is really struggling ...
    I already have some very useful help from some people on here but still have no luck.
    Below is what my assignment is about and what I've done so far, sorry if it's very basic but I'm trying my hardest.
    You are required to write a program in Java that can store the details of three books. Their details are
    Author
    Shelf location
    Availability
    The program should give each book a unique shelf location starting from 0001. The details should be entered from the keyboard. The program should, on request, be able to print the details of each book to the screen. The program should terminate on request. The program should first ask for a preset password to be given before continuing executing any operation described above
    public class Library {
    public static void main(String[] args) {
    String[][] books =
         { "Shelf Location", "Author   ", "Book Name     ", "Availability" },
    { "0001          ", "A. Smith ", "Hello World   ", "1           " },
    { "0002          ", "C. Jones ", "Goodbye World ", "0           " },
    { "0003          ", "D. Wan   ", "Whatever      ", "5           " }
    for (int i = 0; i < books.length; i++) {
         System.out.print(books[0] + " ");
    for (int j = 1; j < books[i].length; j++) {
         System.out.print(books[i][j] + " ");
         System.out.println();
    import java.io.*;
    public class Login2
    private static BufferedReader in;
    private static BufferedReader keyboard;
    public static void main(String[] args) throws IOException
    keyboard = new BufferedReader(
    new InputStreamReader(System.in));
    String input;
    boolean done = false;
    while (!done)
    System.out.print("Enter Password in UPPERCASE (QUIT to exit)");
    input = keyboard.readLine();
    if ((input.equals("LOGIN")) || (input.equalsIgnoreCase("QUIT")))
    done =
    true;
    return.Library();
    I was told to use cases, instances, etc ... nothing complicated is needed but it is still to much for me. I saw some examples of people's work and they only have approx 1.5 pages of code.
    Thanx very much for people who reads this thread and offers me help.

    Here's something to play around with (minimal error handling)
    import java.io.*;
    class Library
      private final String password = "java";
      BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
      private String books[][] = new String[3000][];
      int bookTotal = 0;
      public Library() throws IOException
        options();
      private void options() throws IOException
        System.out.print("\nLibrary Options - \n0 - quit\n1 - Enter book details"+
              "\n2 - List book details\n\nPlease enter selection number: ");
        int selection = Integer.parseInt(br.readLine());
        if(selection == 0) goodBye();
        else
          checkPassword();
          if(selection == 1) newBook();
          else listBook();
      private void newBook() throws IOException
        String another="";
        do
          if(bookTotal == books.length)
            System.out.println("Unable to add more books");
            return;
          books[bookTotal] = new String[4];
          System.out.print("\nEnter title details: ");
          books[bookTotal][0] = br.readLine();
          System.out.print("Enter author details: ");
          books[bookTotal][1] = br.readLine();
          System.out.print("Enter shelf location details: ");
          books[bookTotal][2] = br.readLine();
          System.out.print("\n0 - out of stock\n1 - available\n2 - on loan"+
                                           "\nEnter availability details: ");
          books[bookTotal][3] = br.readLine();
          bookTotal++;
          System.out.print("\nEnter another book? (y/n): ");
          another = br.readLine();
        }while(another.toLowerCase().equals("y"));
        options();
      private void listBook() throws IOException
        String another="";
        String titles = "\n";
        String availability[] = {"out of stock","available","on loan"};
        for(int i=0;i<bookTotal;i++) titles += (i+1)+" - "+books[0]+"\n";
    int selection = 0;
    if(bookTotal > 0)
    do
    System.out.print(titles+ "Please enter selection number: ");
    selection = Integer.parseInt(br.readLine()) - 1;
    System.out.println("\nBook title = "+books[selection][0]);
    System.out.println("Book author = "+books[selection][1]);
    System.out.println("Book shelf location = "+books[selection][2]);
    System.out.println("Availability = "+availability[Integer.parseInt(books[selection][3])]);
    System.out.print("\nList another book? (y/n): ");
    another = br.readLine();
    }while(another.toLowerCase().equals("y"));
    else System.out.println("\nno books to list\n");
    options();
    private void goodBye()
    System.out.println("\nThank you for using the Library program.\nGoodbye.\n");
    System.exit(0);
    private void checkPassword() throws IOException
    System.out.print("\nEnter password to continue: ");
    String pwd = br.readLine();
    if(!pwd.equals(password)) goodBye();
    public static void main(String args[]) throws IOException
    new Library();

  • Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)

    When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
    The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
    Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
    I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
    I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
    Attached is LV version 10 and 11
    Thanks for the help
    Attachments:
    LCT_DAQmx v11.0.vi ‏173 KB
    LCT_DAQmx.vi ‏135 KB

    There are some things you can probabaly do fairly easily.  Four of the inner while loops appear to be very similar.  You could probably make a subVI from one of them and reuse the code.  Some of the shift registers are initialized and some are not.  I suspect that this is an error, although I did not look closely enough to determine which way is intended.  Read up on reentrancy.  You may need that for the subVI.
    The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button.  Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
    Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
    The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter).  The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
    You Dequeue in two places in each loop.  There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first.  Also, none of the Dequeues has a timeout set. They will wait forever if no data is available.  Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
    Lynn

  • Need help with Muse PHP (JavaScript error...email)

    Hey all....
    I searched and did not see an answer for this:
    I am exporting my Muse file to HTML and keep getting this error for my Contact Us page (email issue):
    "JavaScript Error:Form PHP Script is missing from web server, or PHP is not configured correctly or your web host provider.  Check if the form PHP script as been uploaded correctly, then contact your hosting provider about PHP configuration."
    What PHP version does MUSE support....5.1?  I contacted HostGator and they just updated my PHP to 5.5 and asked me what PHP MUSE needs. HostGator says 5.1 is old and they do not support 5.1. Can anyone help me?
    Also, when I try to check PHP with: http://my-site.com/scripts/form_check.php I just get an "oops" screen, but does not verify my PHP.????
    Thanks

    Difficult to debug without the URL for the form page on your site...
    Are you using the built-in File > Upload to FTP Host in Muse? Or did you use File > Export as HTML and uploaded with some other tool?
    Does http://<insert your domain name here>/scripts/museutils.js load anything? Or does it also give an "oops" screen? If it gives an "oops" screen, that would imply not all the exported files were uploaded to your server, they weren't uploaded to the correct location, or the permissions aren't set correctly.
    For forms Muse only requires PHP 4.1 or later. PHP version is not the issue.

  • I need help with Mavericks Server: an error occurred while configuring your server.  I

    I need help with Mavricks Server, I get the following: an error occurred while configuring your server.  I have deleted the Server.app several times along with the associated com.apple and Server folder.  Any more help would be appreciated.

    There are usually some log files around, related to the installation.  See if Console.app (Applications > Utilities) shows anything relevant to the error, when you've done a fresh install of Server.app and tried the configuration.

  • [8i] Need help with some workday calculations

    At the beginning of the month, I got help with a workday calculation in: [8i] Help with function with parameters (for workday calculation)
    Now, as it turns out, I was able to locate a function in the database that does what I want, however, it is much slower to use the function than to join two copies of the CALN table (Please see referenced thread for details. I can copy them to this thread if necessary.) I need to verify that the pre-existing function has 'DETERMINISTIC' in it, as I would guess that if it doesn't, it would be much slower than it could be.
    But now, I've come across a situation where I have to do multiple workday calculations in the same query--enough that I have to join 6 copies of my CALN table. I can't imagine that is at all efficient. I believe it was Frank K. who said (in the original thread) that if the function was slow, I should consider alternatives. Can anyone help me identify some of those alternatives? I'm definitely at that point now. (This query is one I'm using as the base for a report in Oracle BI, and let's just say it doesn't like my query, even though my syntax appears to be correct, and I would guess that joining 6 copies of one table is at least partly to blame for this).
    Note: I'm working with Oracle 8i

    OK, I finally have some sample data... I tried to make it thorough. I've included data in the CALN table YTD + tomorrow, so that any workday calculations using SYSDATE will work.
    CREATE TABLE caln
    (     clndr_dt     DATE          NOT NULL
    ,     clndr_yr     NUMBER
    ,     shop_day     NUMBER
    ,     shop_dt          DATE
    ,     shop_wk          NUMBER
    ,     shop_yr          NUMBER
    ,     shop_days     NUMBER
    ,     clndr_days     NUMBER
         CONSTRAINT caln_pk PRIMARY KEY (clndr_dt)
    INSERT INTO     caln
    VALUES (To_Date('12/23/2009','mm/dd/yyyy'),2009,247,To_Date('12/23/2009','mm/dd/yyyy'),51,2009,7631,10950);
    INSERT INTO     caln
    VALUES (To_Date('01/01/2010','mm/dd/yyyy'),2010,0,To_Date('12/23/2009','mm/dd/yyyy'),52,2009,7631,10959);
    INSERT INTO     caln
    VALUES (To_Date('01/02/2010','mm/dd/yyyy'),2010,0,To_Date('12/23/2009','mm/dd/yyyy'),52,2009,7631,10960);
    INSERT INTO     caln
    VALUES (To_Date('01/03/2010','mm/dd/yyyy'),2010,0,To_Date('12/23/2009','mm/dd/yyyy'),1,2010,7631,10961);
    INSERT INTO     caln
    VALUES (To_Date('01/04/2010','mm/dd/yyyy'),2010,1,To_Date('01/04/2010','mm/dd/yyyy'),1,2010,7632,10962);
    INSERT INTO     caln
    VALUES (To_Date('01/05/2010','mm/dd/yyyy'),2010,2,To_Date('01/05/2010','mm/dd/yyyy'),1,2010,7633,10963);
    INSERT INTO     caln
    VALUES (To_Date('01/06/2010','mm/dd/yyyy'),2010,3,To_Date('01/06/2010','mm/dd/yyyy'),1,2010,7634,10964);
    INSERT INTO     caln
    VALUES (To_Date('01/07/2010','mm/dd/yyyy'),2010,4,To_Date('01/07/2010','mm/dd/yyyy'),1,2010,7635,10965);
    INSERT INTO     caln
    VALUES (To_Date('01/08/2010','mm/dd/yyyy'),2010,5,To_Date('01/08/2010','mm/dd/yyyy'),1,2010,7636,10966);
    INSERT INTO     caln
    VALUES (To_Date('01/09/2010','mm/dd/yyyy'),2010,0,To_Date('01/08/2010','mm/dd/yyyy'),1,2010,7636,10967);
    INSERT INTO     caln
    VALUES (To_Date('01/10/2010','mm/dd/yyyy'),2010,0,To_Date('01/08/2010','mm/dd/yyyy'),2,2010,7636,10968);
    INSERT INTO     caln
    VALUES (To_Date('01/11/2010','mm/dd/yyyy'),2010,6,To_Date('01/11/2010','mm/dd/yyyy'),2,2010,7637,10969);
    INSERT INTO     caln
    VALUES (To_Date('01/12/2010','mm/dd/yyyy'),2010,7,To_Date('01/12/2010','mm/dd/yyyy'),2,2010,7638,10970);
    INSERT INTO     caln
    VALUES (To_Date('01/13/2010','mm/dd/yyyy'),2010,8,To_Date('01/13/2010','mm/dd/yyyy'),2,2010,7639,10971);
    INSERT INTO     caln
    VALUES (To_Date('01/14/2010','mm/dd/yyyy'),2010,9,To_Date('01/14/2010','mm/dd/yyyy'),2,2010,7640,10972);
    INSERT INTO     caln
    VALUES (To_Date('01/15/2010','mm/dd/yyyy'),2010,10,To_Date('01/15/2010','mm/dd/yyyy'),2,2010,7641,10973);
    INSERT INTO     caln
    VALUES (To_Date('01/16/2010','mm/dd/yyyy'),2010,0,To_Date('01/15/2010','mm/dd/yyyy'),2,2010,7641,10974);
    INSERT INTO     caln
    VALUES (To_Date('01/17/2010','mm/dd/yyyy'),2010,0,To_Date('01/15/2010','mm/dd/yyyy'),3,2010,7641,10975);
    INSERT INTO     caln
    VALUES (To_Date('01/18/2010','mm/dd/yyyy'),2010,11,To_Date('01/18/2010','mm/dd/yyyy'),3,2010,7642,10976);
    INSERT INTO     caln
    VALUES (To_Date('01/19/2010','mm/dd/yyyy'),2010,12,To_Date('01/19/2010','mm/dd/yyyy'),3,2010,7643,10977);
    INSERT INTO     caln
    VALUES (To_Date('01/20/2010','mm/dd/yyyy'),2010,13,To_Date('01/20/2010','mm/dd/yyyy'),3,2010,7644,10978);
    INSERT INTO     caln
    VALUES (To_Date('01/21/2010','mm/dd/yyyy'),2010,14,To_Date('01/21/2010','mm/dd/yyyy'),3,2010,7645,10979);
    INSERT INTO     caln
    VALUES (To_Date('01/22/2010','mm/dd/yyyy'),2010,15,To_Date('01/22/2010','mm/dd/yyyy'),3,2010,7646,10980);
    INSERT INTO     caln
    VALUES (To_Date('01/23/2010','mm/dd/yyyy'),2010,0,To_Date('01/22/2010','mm/dd/yyyy'),3,2010,7646,10981);
    INSERT INTO     caln
    VALUES (To_Date('01/24/2010','mm/dd/yyyy'),2010,0,To_Date('01/22/2010','mm/dd/yyyy'),4,2010,7646,10982);
    INSERT INTO     caln
    VALUES (To_Date('01/25/2010','mm/dd/yyyy'),2010,16,To_Date('01/25/2010','mm/dd/yyyy'),4,2010,7647,10983);
    INSERT INTO     caln
    VALUES (To_Date('01/26/2010','mm/dd/yyyy'),2010,17,To_Date('01/26/2010','mm/dd/yyyy'),4,2010,7648,10984);
    INSERT INTO     caln
    VALUES (To_Date('01/27/2010','mm/dd/yyyy'),2010,18,To_Date('01/27/2010','mm/dd/yyyy'),4,2010,7649,10985);
    INSERT INTO     caln
    VALUES (To_Date('01/28/2010','mm/dd/yyyy'),2010,19,To_Date('01/28/2010','mm/dd/yyyy'),4,2010,7650,10986);
    INSERT INTO     caln
    VALUES (To_Date('01/29/2010','mm/dd/yyyy'),2010,20,To_Date('01/29/2010','mm/dd/yyyy'),4,2010,7651,10987);
    INSERT INTO     caln
    VALUES (To_Date('01/30/2010','mm/dd/yyyy'),2010,0,To_Date('01/29/2010','mm/dd/yyyy'),4,2010,7651,10988);
    INSERT INTO     caln
    VALUES (To_Date('01/31/2010','mm/dd/yyyy'),2010,0,To_Date('01/29/2010','mm/dd/yyyy'),5,2010,7651,10989);
    INSERT INTO     caln
    VALUES (To_Date('02/01/2010','mm/dd/yyyy'),2010,21,To_Date('02/01/2010','mm/dd/yyyy'),5,2010,7652,10990);
    INSERT INTO     caln
    VALUES (To_Date('02/02/2010','mm/dd/yyyy'),2010,22,To_Date('02/02/2010','mm/dd/yyyy'),5,2010,7653,10991);
    INSERT INTO     caln
    VALUES (To_Date('02/03/2010','mm/dd/yyyy'),2010,23,To_Date('02/03/2010','mm/dd/yyyy'),5,2010,7654,10992);
    INSERT INTO     caln
    VALUES (To_Date('02/04/2010','mm/dd/yyyy'),2010,24,To_Date('02/04/2010','mm/dd/yyyy'),5,2010,7655,10993);
    INSERT INTO     caln
    VALUES (To_Date('02/05/2010','mm/dd/yyyy'),2010,25,To_Date('02/05/2010','mm/dd/yyyy'),5,2010,7656,10994);
    INSERT INTO     caln
    VALUES (To_Date('02/06/2010','mm/dd/yyyy'),2010,0,To_Date('02/05/2010','mm/dd/yyyy'),5,2010,7656,10995);
    INSERT INTO     caln
    VALUES (To_Date('02/07/2010','mm/dd/yyyy'),2010,0,To_Date('02/05/2010','mm/dd/yyyy'),6,2010,7656,10996);
    INSERT INTO     caln
    VALUES (To_Date('02/08/2010','mm/dd/yyyy'),2010,26,To_Date('02/08/2010','mm/dd/yyyy'),6,2010,7657,10997);
    INSERT INTO     caln
    VALUES (To_Date('02/09/2010','mm/dd/yyyy'),2010,27,To_Date('02/09/2010','mm/dd/yyyy'),6,2010,7658,10998);
    INSERT INTO     caln
    VALUES (To_Date('02/10/2010','mm/dd/yyyy'),2010,28,To_Date('02/10/2010','mm/dd/yyyy'),6,2010,7659,10999);
    INSERT INTO     caln
    VALUES (To_Date('02/11/2010','mm/dd/yyyy'),2010,29,To_Date('02/11/2010','mm/dd/yyyy'),6,2010,7660,11000);
    INSERT INTO     caln
    VALUES (To_Date('02/12/2010','mm/dd/yyyy'),2010,30,To_Date('02/12/2010','mm/dd/yyyy'),6,2010,7661,11001);
    INSERT INTO     caln
    VALUES (To_Date('02/13/2010','mm/dd/yyyy'),2010,0,To_Date('02/12/2010','mm/dd/yyyy'),6,2010,7661,11002);
    INSERT INTO     caln
    VALUES (To_Date('02/14/2010','mm/dd/yyyy'),2010,0,To_Date('02/12/2010','mm/dd/yyyy'),7,2010,7661,11003);
    INSERT INTO     caln
    VALUES (To_Date('02/15/2010','mm/dd/yyyy'),2010,31,To_Date('02/15/2010','mm/dd/yyyy'),7,2010,7662,11004);
    INSERT INTO     caln
    VALUES (To_Date('02/16/2010','mm/dd/yyyy'),2010,32,To_Date('02/16/2010','mm/dd/yyyy'),7,2010,7663,11005);
    INSERT INTO     caln
    VALUES (To_Date('02/17/2010','mm/dd/yyyy'),2010,33,To_Date('02/17/2010','mm/dd/yyyy'),7,2010,7664,11006);
    INSERT INTO     caln
    VALUES (To_Date('02/18/2010','mm/dd/yyyy'),2010,34,To_Date('02/18/2010','mm/dd/yyyy'),7,2010,7665,11007);
    INSERT INTO     caln
    VALUES (To_Date('02/19/2010','mm/dd/yyyy'),2010,35,To_Date('02/19/2010','mm/dd/yyyy'),7,2010,7666,11008);
    INSERT INTO     caln
    VALUES (To_Date('02/20/2010','mm/dd/yyyy'),2010,0,To_Date('02/19/2010','mm/dd/yyyy'),7,2010,7666,11009);
    CREATE TABLE ords
    (     ord_nbr          NUMBER          NOT NULL
    ,     sub_nbr          NUMBER          NOT NULL
    ,     ord_stat     VARCHAR2(2)
    ,     ord_qty          NUMBER
    ,     part_nbr     VARCHAR2(5)
         CONSTRAINT ords_pk PRIMARY KEY (ord_nbr, sub_nbr)
    INSERT INTO     ords
    VALUES (1,1,'CL',10,'PART1');
    INSERT INTO     ords
    VALUES (1,2,'CL',5,'PART1');
    INSERT INTO     ords
    VALUES (25,1,'CL',15,'PART2');
    INSERT INTO     ords
    VALUES (14,1,'OP',12,'PART3');
    INSERT INTO     ords
    VALUES (33,1,'CL',25,'PART1');
    INSERT INTO     ords
    VALUES (33,2,'CL',15,'PART1');
    INSERT INTO     ords
    VALUES (33,3,'OP',10,'PART1');
    INSERT INTO     ords
    VALUES (7,1,'PL',18,'PART2');
    INSERT INTO     ords
    VALUES (96,1,'PL',10,'PART3');
    INSERT INTO     ords
    VALUES (31,1,'CL',20,'PART2');
    CREATE TABLE oops
    (     ord_nbr          NUMBER          NOT NULL
    ,     sub_nbr          NUMBER          NOT NULL
    ,     op_nbr          VARCHAR2(4)     NOT NULL
    ,     mach_id          VARCHAR2(4)
    ,     oper_stat     VARCHAR2(2)
    ,     plan_start_dt     DATE
    ,     plsu          NUMBER
    ,     plrn          NUMBER
         CONSTRAINT ords_pk PRIMARY KEY (ord_nbr, sub_nbr, op_nbr)
    -- NOTE:
    -- for the orders with a status of 'CL' or 'PL' in the 'ords' table, I'm not bothering to put
    -- in more than two operations (though in reality more would be there) since they should be
    -- ignored in the final result anyway
    INSERT INTO     oops
    VALUES (1,1,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.2);
    INSERT INTO     oops
    VALUES (1,1,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.15);
    INSERT INTO     oops
    VALUES (1,2,'0010','123A','CP',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.2);
    INSERT INTO     oops
    VALUES (1,2,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.15);
    INSERT INTO     oops
    VALUES (25,1,'0005','123A','CP',TO_DATE('01/18/2010','mm/dd/yyyy'),2,0.25);
    INSERT INTO     oops
    VALUES (25,1,'0030','110C','CL',TO_DATE('01/19/2010','mm/dd/yyyy'),4,0.1);
    INSERT INTO     oops
    VALUES (14,1,'0010','127A','CP',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.25);
    INSERT INTO     oops
    VALUES (14,1,'0025','110C','CL',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
    INSERT INTO     oops
    VALUES (14,1,'0040','050C','CP',TO_DATE('01/13/2010','mm/dd/yyyy'),1.3,0.15);
    INSERT INTO     oops
    VALUES (14,1,'0050','220B','WK',TO_DATE('01/14/2010','mm/dd/yyyy'),4,0.25);
    INSERT INTO     oops
    VALUES (14,1,'0065','242B','AV',TO_DATE('01/18/2010','mm/dd/yyyy'),1.5,0.1);
    INSERT INTO     oops
    VALUES (14,1,'0067','150G','NA',TO_DATE('01/19/2010','mm/dd/yyyy'),2,0.1);
    INSERT INTO     oops
    VALUES (14,1,'0100','250G','NA',TO_DATE('01/20/2010','mm/dd/yyyy'),2.1,0.2);
    INSERT INTO     oops
    VALUES (33,1,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
    INSERT INTO     oops
    VALUES (33,1,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
    INSERT INTO     oops
    VALUES (33,2,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
    INSERT INTO     oops
    VALUES (33,2,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
    INSERT INTO     oops
    VALUES (33,3,'0010','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
    INSERT INTO     oops
    VALUES (33,3,'0015','259B','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
    INSERT INTO     oops
    VALUES (33,3,'0020','220B','NA',TO_DATE('01/12/2010','mm/dd/yyyy'),1.7,0.15);
    INSERT INTO     oops
    VALUES (33,3,'0030','150G','NA',TO_DATE('01/13/2010','mm/dd/yyyy'),1.3,0.05);
    INSERT INTO     oops
    VALUES (33,3,'0055','150G','NA',TO_DATE('01/15/2010','mm/dd/yyyy'),2.1.,0.1);
    INSERT INTO     oops
    VALUES (7,1,'0005','123A','NA',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.2);
    INSERT INTO     oops
    VALUES (7,1,'0030','110C','NA',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.15);
    INSERT INTO     oops
    VALUES (96,1,'0010','127A','NA',TO_DATE('01/11/2010','mm/dd/yyyy'),2,0.25);
    INSERT INTO     oops
    VALUES (96,1,'0025','110C','NA',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
    INSERT INTO     oops
    VALUES (31,1,'0005','123A','CL',TO_DATE('01/11/2010','mm/dd/yyyy'),1.9,0.2);
    INSERT INTO     oops
    VALUES (31,1,'0030','110C','CP',TO_DATE('01/12/2010','mm/dd/yyyy'),1,0.1);
    CREATE TABLE mach
    (     mach_id          VARCHAR2(4)     NOT NULL
    ,     desc_short     VARCHAR2(9)     
    ,     group          VARCHAR2(7)
         CONSTRAINT ords_pk PRIMARY KEY (mach_id)
    INSERT INTO     mach
    VALUES     ('123A','desc here','GROUPH1');
    INSERT INTO     mach
    VALUES     ('259B','desc here','GROUPH2');
    INSERT INTO     mach
    VALUES     ('110C','desc here','GROUPJ1');
    INSERT INTO     mach
    VALUES     ('050C','desc here','GROUPK2');
    INSERT INTO     mach
    VALUES     ('220B','desc here','GROUPH2');
    INSERT INTO     mach
    VALUES     ('242B','desc here','GROUPH2');
    INSERT INTO     mach
    VALUES     ('150G','desc here','GROUPL1');
    INSERT INTO     mach
    VALUES     ('250G','desc here','GROUPL2');
    INSERT INTO     mach
    VALUES     ('242B','desc here','GROUPH2');

  • Help with some transitions

    Hello, i'm trying to do add some transitions to my video. I want to do a intro like this: http://www.youtube.com/watch?v=aBPV0f6c56s
    I have already written the swords, the texts and the central anime minecraft guy with Anime Studio, but i need to do this 3 things:
    1. Am expanding cirle opening
    2. A light/flash as transition between the first animation and the next logo
    (I have another question, but more difficult: I want to do a sun rays effect from an angle)
    All of these effects-transitions are in the youtube video that i linked.
    Can someone help me with one of these questions?
    I have Adobe After Effects and Premiere Pro.
    Thank you for the attention.

    The circle wipe is just that, a transition. Look in Effects>Transition. I'll give you a clue, a circle has a radius... It's there along with some more interesting effects.
    You can also do a circle transition with a simple animated mask, use a scaled round layer as a track matte or about a hundred other combinations.
    The light burst effect can be done with a simple masked white solid blend mode set to add and opacity keyframes or by searching your effects and pre-sets for light b. You'll find it. Just add it to a solid between your layers, set the blend mode to add and use an animated mask and opacity to bring in the effect. (the yellow thing in the middle is the animated mask that makes CC light burst interesting.
    Same thing can be used for your sun rays. It's just a matter of layering and the shape of your mask.
    Here again, there are dozens of ways to achieve this effect.
    If you're completely lost then start here. This is basic enough AE that you shouldn't really need a step by step tutorial to pull it off.
    Or as dave suggested, get Anime Studio.

  • Help with some PL/SQL Triggers

    hello there, I'm totally new using PL/SQL so I need your help with two triggers.
    For instance
    1. Compare two dates, and verify that there are different, you must send a message Error
    2. When I insert a new record, a trigger must obtain data from other tables and add it (on a new record)
    Maybe not the answers, maybe the way to go!
    Thks!

    Hi,
    Welcome to the forum
    1. Compare two dates, and verify that there are different, you must send a message Errorwhy trigger ?
    Trigger is Only for when DML Performed :)
    try 1st one in procedure..
    create or replace procedure testing(p_date in date)
    is
    v_date date;
    begin
    select to_date(hiredate,'mm-dd-rr') into v_date
    from emp
    where to_date(hiredate,'mm-dd-rr')=to_date(p_date,'mm-dd-rr');
    dbms_output.put_line(v_date);
    exception
    when others then
    dbms_output.put_line('No Data Found');
    end;
    2. When I insert a new record, a trigger must obtain data from other tables and add it (on a new record)i didn't understand can you please explain me in detail ?
    Thanks
    Venkadesh

  • Help with some java login code

    hey,
    I am a new member but used to visit the site regularly. I am undergoing a java project and I cannot seem to get my head around how to code when users log in, there name must appear at the top of each page they visit.
    User enters name into a text box. Do I use getter and setter methods? any bit of help would be of some advantage to me.
    Thanks for your time and I'll help with anyone else who is stuck.

    if JSP or servlet use Session...
    if you are using frame you have to consider... which frame is a top parent. that top frame will have the set and get method.. for you to set and retrieve the user name.. bear in mind that different object will have different user...
    so you have to play fair game ...hehehehe :-)

  • Help with some iPhone issues please

    Ok, I am starting to have some problems with my iPhone 3G, and would really appreciate any help with these issues.. here is what is happening
    1) iPhone Vibrate is pretty much broken, turns off and on vibrate by itself.. and now is vibrating very softly.
    2) iPhone wont sync my Music anymore, I have 3 playlists that I use on my iPhone, and none of them will update. When I sync my iPhone, everything syncs but the music.
    3) iPhone sometimes completely freezes and i cant get it to go to the locksreen or power off, so I have to do a hard restart.

    Hi Matt,
    Try restoring the iPhone, this article: http://support.apple.com/kb/HT1414 will walk you through the process.
    If the vibrate and unlock issues persists, the iPhone may need hardware repair. Just make a reservation to have a Genius, at a local Apple retail store, take a look at it or call AppleCare.
    http://www.apple.com/retail/geniusbar/
    U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    Message was edited by: Jason L

  • Help with some fundamentals...

    OK, still trying to play catchup after some years away from Java. I'm slowly getting back up to speed with the help of some of the gurus present on this site.
    Here's the background: Working on examples from a Wrox book on JSP and moving to database connections. Programs compile fine but run into this NoClassDefFoundError. Here is a simple example:
    public class HelloWorld
    public static void main(String args[])
    System.out.println("Hello World!");
    Simple, heh? Compiles fine and when it is ran from the command line, this comes back:
    Exception in thread "main" java.lang.NoClassDefFoundError: com\wrox\db\HelloWorl
    d (wrong name: HelloWorld)
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$000(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    On reading some help from others in previous questions, I set up a little batch file named setClassPath.bat. This file is to insure that the classpath for the programs in each of the chapters is part of the classpath. Here it is below:
    rem Contents of setClassPath.bat file:
    set CLASSPATH=%CLASSPATH%;<path to the java files under Tomcat server>
    What am I forgetting or missing?

    Note the train of events:
    C:\Documents and Settings\Dave Fliger\My Documents\apache-tomcat-6.0.14\webapps\begjsp-ch15\WEB-INF\classes>cd C:\Wrox
    C:\Wrox>dir
    Volume in drive C has no label.
    Volume Serial Number is C825-3EAA
    Directory of C:\Wrox
    10/03/2007 02:59 PM <DIR> .
    10/03/2007 02:59 PM <DIR> ..
    10/03/2007 02:59 PM 2,139 HelloWorld.java
    1 File(s) 2,139 bytes
    2 Dir(s) 47,145,979,904 bytes free
    C:\Wrox>javac HelloWorld.java
    C:\Wrox>java HelloWorld
    Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
    C:\Wrox>
    Class compiled:
    public class HelloWorld
    public static void main(String args[])
    System.out.println("Hello World!");
    }

  • Help with some Java Programs

    Hi all ..
    i am a new in Java and i need some help with my School Project ,,,
    Will you help me ??
    regards,
    Toota

    People here will answer questions and comment on your code, but don't ecpect them to debug your source nor do your homework for you.

Maybe you are looking for

  • How can I manually change the height of the "Type ...

    Hi all Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions.  First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, l

  • PSE 12 email not working

    Used PSE 12 for several months with no problems; recently, cannot email. Everything appears to work as before, but nothing is sent. I have uninstalled and re-installed program twice. I do not use Outlook, I use Adobe mail. My mail provider is yahoo.

  • Duplicate Overheads in Sales Order costing

    Hi Experts, We are facing an issue in VA02 and VA22. Here we are getting duplicate overheads in costing as below image: Kindly help. I am an ABAPer and debugged for it but could not find any bug. So this functional approach could help, I thought. Tha

  • ORA-07202 sltln: invalid parameter to sltln.using dbca to create 11g

    OS:Red Hat Linux 5 DB :11.2.0.2 i am getting this error while creating 11g DB using DBCA ORA-07202 sltln: invalid parameter to sltln.using dbca to create

  • Sap Service Manager is not showing SAP Services

    We performed a migration from Oracle 8.0.4 to Oracle 8.1.7.1 on a WIN NT 4.0 server with a SAP 30F system release and kernel 31I to 31I_COM. The migration of the db to 8.1.7.4 worked well, but after that, the message server and the dispatcher service