Help with updating plugin for raws on a mac please

Hi,
I've got a mac on os 10.4.11 with 2 GB of memory.
I had Elements 4.0 on it, but had to upgrade to the current release to get compatibility with my new camera and it's raw format.
I installed Elements 8.0, and it worked fine but needed a plugin upgrade to see my new cameras raws.
I then followed the installation instructions (except the part about the Camera Raw.8bi file which doesn't seem to exist on my system...??)
to go to the plugin v 6.1 (also tried v6.2) and when I do, and I relaunch Elements, it doesn't recognize the file, and if I click Photoshop Elements > About Plugin > Camera Raw ... I get the error "Could not complete the Camera Raw command because there is not enough memory (RAM)" -- this makes no sense to me given that I have 2 GB on the machine, and am not running any other software. Here are the steps I took to do the update of the plugin:
Download it
Stop elements
drill the folder where the orig plugin is (in the plugins\file formats directory)
Replace the original plugin with the new one
Start Elements
run the cameraprofiles.mpkg file
Stop Elements
Start Elements
click Photoshop Elements > About Plugin > Camera Raw ...
<Error as stated above>
so, what the heck am I missing?
Thanks
Dave

Okay, something is wrong with your procedure.
You need to go here:
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
and download the plug-in. (I'd stick to 6.1 for right now, since several people are reporting problems wit 6.2, if your camera works with 6.1).
Put the .plugin file in the specified location (per the readme file), but you must remove any older versions first, no matter what the instructions may say.
To update bridge, go to Help>Updates in bridge, but you can't update bridge past ACR 5.7.

Similar Messages

Help with Apache plugin for Tomcat

I downloaded jakarta-tomcat-connectors-jk2-src-current.tar.gz from apache.org. I am trying to install this without any progress. The web page http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jk2/index.html gives lots of info on how to install the plug in called JK. I believe the unix section applies to linux as well. Can anyone help me with this? Please copy your message if at all possible to [email protected] Thanks Murthy

I know what mod_jk is, I was just trying to understand your situation.
You have two choices, mod_jk and mod_jk2 with different configurations files.
In both cases, you need 3 parts:
1- apache
2- the mod_jk(2) module (.so) for your apache version (1.3.x or 2.x)
3- tomcat
You obviously have 1 and 3, and probably 2 also.
Config is twofold:
1) In httpd.conf (Apache 2.0) you need:LoadModule jk2_module modules/mod_jk2.so
<IfModule mod_jk2.c>
JkSet config:file "/path/to/workers2.properties"
</IfModule>
# And for each context:
   <Location "/contextname/*">
      JkUriSet worker ajp13:localhost:8001
   </Location>2) workers2.properties:[logger]
level=WARN
#INFO
#/web_ci/
[config:]
file=/path/to/workers2.properties
debug=0
debugEnv=0
[uriMap:]
info=Maps the requests. Options: debug
debug=0
# Alternate file logger
[logger.file:0]
level=WARN
file=/path/to/logs/jk2.log
# Cache for activity
# Must point to a writeable path
[shm:]
info=Scoreboard. Required for reconfiguration and status with multiprocess servers
file=/path/to/jk2.shm
size=1000000
debug=0
disabled=0
[workerEnv:]
info=Global server options
timing=1
debug=99
# Default Native Logger (apache2 or win32 )
# can be overriden to a file logger, useful
# when tracing win32 related issues
logger=logger.file:0
# Communication channel to use
[channel.socket:localhost:8001]
info=Ajp13 forwarding over socket
debug=0
tomcatId=localhost:8001
# Connector as in conf/server.xml
[ajp13:localhost:8001]
channel=channel.socket:localhost:8001
# Tomcat load balancing
[lb:lb]
info=Default load balancer.
debug=0
[status:status]
info=Status worker, displays runtime informations
# Monitor for requests and config http://server:port/jkstatus
[uri:/jkstatus/*]
info=Display status information and checks the config file for changes.
group=status:status3) Finally, you need to set the connector (port number) in server.xml    
    <Connector className="org.apache.coyote.tomcat5.CoyoteConnector"
               port="8001" minProcessors="5" maxProcessors="75"
               enableLookups="true" redirectPort="8443"
               acceptCount="10" debug="3" connectionTimeout="2000"
               useURIValidationHack="false"
               protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>This is the setup I use on Win2K, but should work pretty much the same on Linux. I also have a similar setup on Linux, but with mod_jk instead of mod_jk2.
Hope this helps!

Help with Apache plugin for WebLogic on HP-UX

Hi,
I am trying to get Weblogic 5.1(w/sp8) on HP-UX 11 talking to Apache 1.3.19.21(port
8080) also on HP-UX 11 ( both on same box ). I have WebLogic listening on port
9001, and I followed the instructions to configure apache and weblogic. However
when I do http://mymachine:8080/weblogic/portal/hello.jsp. I get unable to find
page.
weblogic is installed in /weblogic. The hello.jsp is located in /weblogic/myserver/public_html/portal/hello.jsp.
Apache is installed in /opt/apache.
The Apache httpd.conf file contains the following:
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
WebLogicHost localhost
WebLogicPort 9001
</Location>
What am I missing ? The error_log for Apache shows the following:
[Mon Nov 12 11:21:09 2001] [warn] Loaded DSO libexec/mod_wl.so uses plain Apache
1.3 API, this module might crash under EAPI! (please recompile it with -DEAPI)
[Mon Nov 12 11:21:10 2001] [notice] Apache/1.3.19 (Unix) PHP/4.0.4pl1 configured
-- resuming normal operations
[Mon Nov 12 11:21:32 2001] [notice] child pid 13248 exit signal Segmentation fau
lt (11)

Well... there is a warning in the log file saying that it might crash - and then
it crashes. Check that you are running a supported platform, if you are, contact
BEA Support.
I would discourage the use of forwarding to 'localhost'.
Mike
"Niranjan Perera" mckesson.com wrote:
>
Hi,
I am trying to get Weblogic 5.1(w/sp8) on HP-UX 11 talking to Apache
1.3.19.21(port
8080) also on HP-UX 11 ( both on same box ). I have WebLogic listening
on port
9001, and I followed the instructions to configure apache and weblogic.
However
when I do http://mymachine:8080/weblogic/portal/hello.jsp. I get unable
to find
page.
weblogic is installed in /weblogic. The hello.jsp is located in /weblogic/myserver/public_html/portal/hello.jsp.
Apache is installed in /opt/apache.
The Apache httpd.conf file contains the following:
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
WebLogicHost localhost
WebLogicPort 9001
</Location>
What am I missing ? The error_log for Apache shows the following:
[Mon Nov 12 11:21:09 2001] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache
1.3 API, this module might crash under EAPI! (please recompile it with
-DEAPI)
[Mon Nov 12 11:21:10 2001] [notice] Apache/1.3.19 (Unix) PHP/4.0.4pl1
configured
-- resuming normal operations
[Mon Nov 12 11:21:32 2001] [notice] child pid 13248 exit signal Segmentation
fau
lt (11)

Help with assigning package for new program!Urgent please!

We upgraded to ECC6.0 and I am trying to create a new function group. I go to se80 --> create new function group --> Enter some text for the function group and then it prompts me to assign a package. I select a package (used to be development class in 4.6C) and when I click on save I get the following error:
"PACKAGE IN NON-ORIGINAL SYSTEM ONLY MODIFIABLE WITH ORGANIZER TOOLS". Could anyone please tell me how to solve this problem? Thanks in advance.
Mithun.

Thanks for the reply Seshu. The package already exists in the new system and I am not sure why i am getting the error!!
Thanks.
Mithun.

Need Photoshop Elements RAW plugin for Canon 70D using MAC

Need Photoshop Elements RAW plugin for Canon 70D using MAC - please advise where I can find it to download. Thanks.

To work with the Canon 70D, you will need Camera Raw version 8.2 or later:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
In order to work with this version of Camera Raw, you will need Photoshop Elements 12:
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
If you do not have Photoshop Elements 12, you can use the DNG converter to convert the CR2 files to DNG, which will then work in whatever version of Photoshop Elements you have:
Windows: https://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

Hello-
Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs. One allows updates to check automatically. It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now." although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available. Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now." If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash? Does it come in an email?
Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash? (The way before this icon was added to System Preferences)?
I would appreciate help with updating Flash to the most recent version. I used to uninstall the older version, restart the browser and download the most recent version and install it. It always worked find but this was before there was an Adobe icon in my system Preferences.

Hello,
The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed. Uninstalling shouldn't be required, but it definitely doesn't hurt. If you feel comfortable doing it the old way, please feel free to continue using that process.
As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released. This usually occurs when the browser loads swf content. Clicking the button will, like you mention, immediately check. Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
Is there a way to be automatically notified when a new Flash Runtime release is made?
Thanks,
Chris

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Help with updates - The software change returned error code 0x87D00215(-2016411115).

I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)

Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.

Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Only one UPN suffix works with OAM plugin for RSA-integrated Authentication

Only one UPN suffix works with OAM plugin for RSA-integrated Authentication while others give "CredentialsRejected" error
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-
Has anyone seen this before and might know the answer? Any suggestions? Thanks!
I have setup an OAM authentication scheme that uses a custom plugin to use RSA ACE server - all pretty much exactly as it is outlined in the chapter called "Integrating the RSA SecurID Authentication Plug-in" in Oracle Access Manager Integration Guide. Here's the problem:
Everything works fine when I use a particular UPN suffix to login to the RSA Securid Login form that is presented, eg. [email protected], but if I create another user that uses a different UPN suffix as defined in Active Directory, (eg. [email protected]), the credentials are rejected. This happens before the secuirid.pl script even gets a chance to run. After hitting "POST" the user is present with the same login screen he was just at, as expected during an authentication failure.
More info:
- I have performed successful anonymous ldap queries for both users in Active Directory using LDP. Both users exist in the same domain and in the same OU. If I change the UPN (in AD and the RSA database) to something different from the "good" one, on either user, it fails. If I change the UPN to the "good one" on either user (in AD and the RSA database) it works.
- if I test users with either the "good" or the "bad" UPN via the RSA agent tester that sits on the OAM box, both of them show as authenticating successfully. However, it doesn't work for the "bad" UPN when I try to access via a web browser on a remote client (but does work with the "Good" UPN)
- I am not using SSL in any of this yet, it's all http://
- yes, I already got rid of the "-w" parameter in the first line of the perl script, as per the "login can fail if the Login Attribute Contains an "@" Character in Integration Guide Troubleshooting section
- here's an example of the settings in rsa securid authentication scheme:
action:/OracleAccessManager/securid-cgi/securid.pl
form:/OracleAccessManager/securid-forms-adforest/securid-std-login.html
creds:login password domain newpin newpin2
passthrough:yes
authn_securid fullformdir="C:\apache\Apache2\htdocs/OracleAccessManager/securid-forms-adforest/",machine="MyComputer.mydomain.com:80"
credential_mapping obMappingBase="%domain%",obMappingFilter="(&(objectclass=user)(userPrincipalName=%login%))"
Environment:
OAM 7.0.4.3
RSA Ace Server 5.2
Windows 2003 domain with multiple UPNs defined in Active Direcory Domains and Trusts
Error as seen in the oblog.log for the webgate on the server that holds the RSA login pages and perl script:
Message^A plugin for the authentication scheme SecurID Authentication has denied authentication for credentials ([email protected]
password=(omitted) domain=dc=ourdomain,dc=com newpin= newpin2= Resource=/OracleAccessManager/securid-cgi/securid.pl RequesterIP=10.250.1.2 Operation=POST).
ReqReq^POST /OracleAccessManager/securid-cgi/securid.pl HTTP/1.1 ReqProto^HTTP/1.1 ReqHost^www.MyComputer.mydomain.com. ReqStatLine^
ReqStatus^200 ReqRawUri^/OracleAccessManager/securid-cgi/securid.pl ReqUri^/OracleAccessManager/securid-cgi/securid.pl
ReqFilename^C:/apache/Apache2/htdocs/OracleAccessManager/securid-cgi/securid.pl ReqPath^ ReqArgs^
2009/07/13@15:19:49.665000 45688 46472 AUTHENTICATION ERROR 0x00001515
\Oblix\coreid\palantir\webgate\src\authentication_event_handler.cpp:1361 "Authentication failed" HTTPStatus^401
authenticationSchemeName^SecurID Authentication AuthenticationStatus^majorCode = 11[CredentialsRejected], minorCode = 47[AuthnPluginDenied],
StatusMsg = , GSN = 0, needInfo = NONE Creds^[email protected] password=(omitted) domain=dc=ourdomain,dc=com newpin= newpin2=
Resource=/OracleAccessManager/securid-cgi/securid.pl RequesterIP=10.250.1.2 Operation=POST
Only error seen in log produced by the RSA agent that sits on the Access server:
[20804] 12:27:08.915 File:ACNETSUB.C Line:326 # CheckServerAddress: server 0 detected from address 10.250.88.100
[20804] 12:27:08.915 File:udpmsg.c Line:968 # Entering decrypts_ok_legacy()
[20804] 12:27:08.915 File:udpmsg.c Line:999 # decrypts_ok_legacy: decrypt() wpcode1 failed; wpcode0 next ***********
[20804] 12:27:08.915 File:udpmsg.c Line:1089 # Leaving decrypts_ok_legacy(), result=1
[20804] 12:27:08.915 File:ACEXPORT.C Line:820 # Entering AceGetUserData()
[20804] 12:27:08.915 File:ACEXPORT.C Line:833 # Leaving AceGetUserData() return: ACE_SUCCESS
[20804] 12:27:08.915 File:ACEXPORT.C Line:579 # Entering AceGetAuthenticationStatus()
[20804] 12:27:08.915 File:ACEXPORT.C Line:592 # Leaving AceGetAuthenticationStatus() return: ACE_SUCCESS

What are the logs you see at the ACE server end? You can try passing an additional parameter debug="true" to the authn_securid plug-in - it should generate some more logs at the access server - I think in apps\common\bin.
Also does "ReqHost^www.MyComputer.mydomain.com" look right in the logs?
-Vinod

Help with Simple Applescript for Midipipe

Hey all, I'm in desperate need of help with some Applescript for use in a program called Midipipe:
http://web.mac.com/nicowald/SubtleSoft/MidiPipe.html
I simply require an Applescript for Midipipe that filters out all OFF notes except for the most recently pressed key, or most recently pressed ON note. So for example, when multiple keys have been pressed, only the most recently pressed key will send an OFF note. I hope that is clear enough, i've had some major issues trying to get this work and my last hope is to hit the forums and find some help .. I've posted on some of the audio forums and i'm hoping someone here knows how to code this.
Thanks so much!! .. Its for an upcomming show next week so i'm hoping someone can get me in the right direction to solving this.
-Jes

I try to help, but you'll need to apply your brain cells to get it working with what I've already explained (three times with what I offer below). Try something like the following (I am renaming your buttons to ch1,ch2,ch3,ch4,ch5,ch6 so that the same functions can be shared by all buttons...
// this assigns listeners to all 6 buttons
for(var i:uint=1; i<7; i++){
          this["ch"+String(i)].addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
// this processes any one of the 6 btns when they are clicked
function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
    var btn = event.currentTarget;
    var cuePointInstance:Object = vid.findCuePoint(btn.name);
    vid.seek(cuePointInstance.time);
   resetButtons();    // this makes all buttons go back to normal
    btn.upState = btn.overState; // this makes the clicked button change states
function resetButtons():void {
     for(var i:uint=1; i<7; i++){
          this["ch"+String(i)].upState = this["ch"+String(i)].hitTestState;
For this to work, your buttons need to have the same artwork in the hit frame as they do in the up frame.

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

PDF Viewer plugin for Firefox 4 on Mac

Firefox 4 on Mac would not come with a plugin for pdf viewing, you need to install the file below (just copy and paste in your browser and allow to install):
http://firefox-mac-pdf.s3.amazonaws.com/fx-quartz-pdf-1.2.0.xpi
(you need to run Firefox in 32 bit mode ! go to applications, select Firefox and open "get info", check box for 32 bit mode)

https://support.google.com/chrome/answer/142056?hl=en
https://support.google.com/chrome/answer/142064?hl=en
Those links have more info on Chrom plugins and how to enable or disable them.
From the first link:
By default, Chrome uses a built in viewer to open PDFs. If you've disabled the built-in PDF viewer, Chrome will use Adobe Acrobat or Adobe Reader to display PDFs. Follow the suggestions at the first link if you're having trouble viewing PDFs within Chrome, using Adobe Acrobat or Adobe Reader.
First check if the issue is specific to Chrome. Try opening PDFs in another browser on your computer, such as Firefox. If you experience similar problems viewing PDFs in another browser, the issue is likely not related to Chrome.

Help with updating plugin for raws on a mac please

Similar Messages

Maybe you are looking for