Here's a bizarre one: Please help!
So I have a really strange problem with my AT&T iPhone and how it displays text messages:
I first notcied the problem on my iPhone 3Gs a few months ago and when I upgraded my plan and switched over to the new iPhone 4s, the problem was still there- so I'm just assuming, right off the bat- it's a software issue and NOT a hardware issue.
Here's the deal:
I get text messages all the time like everyone else. I hate when the convos start to pile up so I delete them after a while. Well, I deleted a converstaion I had between my cousin and I (as well as all the others) so that nothing was present in my text messaging screen. A few minutes later, my husband texted me and when I went back to the main section that shows all of your convos with everyone- as I was planning on deleting that convo with him- I noticed my texts between my cousin and I were back on the screen- even though I know I deleted them.
Funny thing is- the texts did not reappear as "new" text messages or alert me. There was no blue bubble next to them. It was as if I had already read them and never deleted them. But I did delete them. How did they magically reappear?
Well- this continued every other day where I would delete them again and then someone else would text me and when I looked back on the main text messaging screen- her texts were back again. This happens not every day- sometimes 3 days apart. And sometimes it can happen 3 times in one hour! AND! It doesn't necessarily take someone else to send me a text to have her convo appear again, Sometimes- without even getting any new messages- I look and where there was once a blank text messaging screen- now all of a sudden her texts appear.
Sometimes it's just the last text she sent to me or I sent to her and sometimes it's our entire convo at that moment. And when she does send me a new text and we write back and forth, I delete them of course, and then when they start to appear- it will be the most recent convo we had- so it's always the most recent messages.
I have called AT&T asking them to resend a signal to my phone to try and clear whatever "cashe" they tell me their system doesn't work that way and they can't figure out why I'm having this problem. I stumped them so much with this issue that they had all their higher ups in the tech deptartment trying to figure it out and they couldn't. The only option they said was to go to an Apple store and get a new phone. Problem is- this issue was happening on my 3Gs as well as my new 4s so I don't think it's the phone itself.
Here's what I've tried to fix the situation:
1. I deleted my cousin as a contact in my phone. Then I reprogrammed her in as a new contact. That didn't do anything.
2. I called her and asked her to delete me as a contact in her phone as well as delete any messages she has from me. By the way- she is using a Sprint Blackberry. That didn't work.
3. AT&T suggested I restore my phone but that hasn't worked.
Any of you smart Apple geniuses know why this keeps happening? It's more annoying than anything- only because I like to delete texts when I'm done with them- that's just the kind of person I am. Now I constantly get her old messages popping up and no matter how many times I delete- they always come back.
If anyone else has had this issue- please let me know. Thanks so much!!!
I agree with you- I do think it's an iCloud issue only because I updated my 3Gs with the new iCloud service and new software update and that's when I started having this issue. I never had an issue before that. And it sounds like an iCloud issue because it reappears even after it was deleted.
AT&T told me they do NOT see these reappear messages on my phone bill- so I know they are not coming through as new texts and I am not being charged for them. In fact, it only seems to be something that happens on my phone- since the service provider cannot even see the action happening on their end.
Of course- I have the same issue when I switched to my 4s, hence why I don't think it has to do with the hardware of the phone or AT&T's service.
BUT! My cousin has a Sprint Blackberry- so these are not iPhone to iPhone blue iMessages. They are the basic, plan old text messages- green. So weird right??? I have a MacBook Pro at home- but I didn't know that iCloud was even able to sync text messages? If so- how do I turn that feature off? Should I just disable my iCloud service? How do I do that?
Similar Messages
-
I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!
I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!
-
i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing. -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.
Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.
-
I wish to uninstal a program ? could some one please help me thank you marie
I wish to uninstal a program / could some one please help me thank you marie
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
Client server code with errors could some one please help me!!!
I am using a random access file to design the two interfaces for my client and my server is this the right thing to do? Oh could some one give me some example code of client server interfaces.
I got an error in the code for the interfaces and I don't know what it is could some one please help me!!
Heres the error in the code: This is for RegisterCustomer
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
class RegisterCustomer extends JPanel implements ActionListener
// Button for registering a customer
private JButton jbtRegister;
// Customer information panel
private CustomerPanel customerPanel; (The error is on this line and it says Field type customer panel is missing)
// Random access file
private RandomAccessFile raf;
Second error: Its in the ViewCustomer:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
// View customer panel
class ViewCustomer extends JPanel implements ActionListener
// Buttons for viewing customer information
private JButton jbtFirst, jbtNext, jbtPrevious, jbtLast;
// Random access file
private RandomAccessFile raf = null;
// Current customer record
private Customer customer = new Customer();
// Create a customer panel
private CustomerPanel customerPanel = new customerPanel(); (its on this line and it says field type CustomerPanel is missing)
// File pointer in the random access file
private long lastPos;
private long currentPos;
Heres the code for the customerPanel:
// Customer Panel.java: Panel for displaying Customer information
import javax.swing.*;
import javax.swing.border.*;
import java.awt.*;
public class customerPanel extends JPanel
JTextField jtfRegistrationnumber = new JTextField(30);
JTextField jtfSeatingcapacity = new JTextField(20);
JTextField jtfStartdateofhire = new JTextField(20);
JTextField jtfDurationofhire = new JTextField(10);
JTextField jtfManufacture = new JTextField(20);
JTextField jtfModel = new JTextField(15);
JTextField jtfEnginesize = new JTextField(15);
JTextField jtfCharge = new JTextField(20);
JTextField jtfMileage = new JTextField(10);
// Constuct a customer panel
public customerPanel()
// Set the panel with line border
setBorder(new BevelBorder(BevelBorder.RAISED));
// Panel p1 for holding all the labels
JPanel p1 = new JPanel();
p1.setLayout(new GridLayout(3, 1));
p1.add(new JLabel("Registration number"));
p1.add(new JLabel("Seating capacity"));
p1.add(new JLabel("Start date of hire"));
p1.add(new JLabel("Duration of hire"));
p1.add(new JLabel("Manufacture"));
p1.add(new JLabel("Model"));
p1.add(new JLabel("Engine size"));
p1.add(new JLabel("Charge"));
p1.add(new JLabel("Mileage"));
// Panel jpRegistration number for registration number
JPanel jpRegistrationnumber = new JPanel();
jpRegistrationnumber.setLayout(new BorderLayout());
jpRegistrationnumber.add(new JLabel("Registration number"), BorderLayout.WEST);
jpRegistrationnumber.add(jtfRegistrationnumber, BorderLayout.CENTER);
// Panel jpSeating capacity for holding Seating capacity
JPanel jpSeatingcapacity = new JPanel();
jpSeatingcapacity.setLayout(new BorderLayout());
jpSeatingcapacity.add(new JLabel("Seating capacity"), BorderLayout.WEST);
jpSeatingcapacity.add(jtfSeatingcapacity, BorderLayout.CENTER);
// Panel jpStart date of hire for holding start date of hire
JPanel jpStartdateofhire = new JPanel();
jpStartdateofhire.setLayout(new BorderLayout());
jpStartdateofhire.add(new JLabel("Start date of hire"), BorderLayout.WEST);
jpStartdateofhire.add(jtfStartdateofhire, BorderLayout.CENTER);
// Panel jpDuration of hire for holding Duration of hire
JPanel jpDurationofhire = new JPanel();
jpDurationofhire.setLayout(new BorderLayout());
jpDurationofhire.add(new JLabel("Duration of hire"), BorderLayout.WEST);
jpDurationofhire.add(jtfDurationofhire, BorderLayout.CENTER);
// Panel p2 for holding jpRegistration number and jpSeating capacity and start date of hire and duration of hire
JPanel p2 = new JPanel();
p2.setLayout(new BorderLayout());
p2.add(jpRegistrationnumber, BorderLayout.WEST);
p2.add(jpSeatingcapacity, BorderLayout.CENTER);
p2.add(jpStartdateofhire, BorderLayout.CENTER);
p2.add(jpDurationofhire, BorderLayout.CENTER);
// Panel p3 for holding jtfManufacture and p2
JPanel p3 = new JPanel();
p3.setLayout(new BorderLayout());
p3.add(jtfManufacture, BorderLayout.CENTER);
p3.add(p2, BorderLayout.EAST);
// Panel p4 for holding jtfModel, jtfEngine size, charge and mileage and p3
JPanel p4 = new JPanel();
p4.setLayout(new GridLayout(3, 1));
p4.add(jtfModel);
p4.add(jtfEnginesize);
p4.add(jtfCharge);
p4.add(jtfMileage);
p4.add(p3);
// Place p1 and p4 into customerPanel
setLayout(new BorderLayout());
add(p1, BorderLayout.WEST);
add(p4, BorderLayout.CENTER);
// Get customer information from the text fields
public Customer getCustomer()
return new Customer(jtfRegistrationnumber.getText().trim(),
jtfSeatingcapacity.getText().trim(),
jtfStartdateofhire.getText().trim(),
jtfDurationofhire.getText().trim(),
jtfManufacture.getText().trim(),
jtfModel.getText().trim(),
jtfEnginesize.getText().trim(),
jtfCharge.getText().trim(),
jtfMileage.getText().trim());
// Set customer information on the text fields
public void setCustomer(Customer s)
jtfRegistrationnumber.setText(s.getRegistrationnumber());
jtfSeatingcapacity.setText(s.getSeatingcapacity());
jtfStartdateofhire.setText(s.getStartdateofhire());
jtfDurationofhire.setText(s.getDurationofhire());
jtfManufacture.setText(s.getManufacture());
jtfModel.setText(s.getModel());
jtfEnginesize.setText(s.getEnginesize());
jtfCharge.setText(s.getCharge());
jtfMileage.setText(s.getMileage());
Could someone please help me and tell me what these two errors mean and how I could get rid of themCan some one take a look at this code and tell me how to get all my jlabels to line up alone side their jtf.
Because it looks like this the picture in the attached file and this is the code for it:
public customerPanel()
// Set the panel with line border
setBorder(new BevelBorder(BevelBorder.RAISED));
// Panel p1 for holding labels Name, Street, and City
JPanel p1 = new JPanel();
p1.setLayout(new GridLayout(5, 1));
p1.add(new JLabel("Registration Number:"));
p1.add(new JLabel("Seating Capacity:"));
p1.add(new JLabel("Engine Size:"));
p1.add(new JLabel("Start date of hire"));
p1.add(new JLabel("Duration of hire"));
JPanel p2 = new JPanel();
p2.setLayout(new GridLayout(5, 1));
p2.add(jtfRegistrationnumber);
p2.add(jtfSeatingcapacity);
p2.add(jtfEnginesize);
p2.add(jtfStartdateofhire);
p2.add(jtfDurationofhire);
//JPanel p3 = new JPanel();
//p3.add(p1, BorderLayout.WEST);
//p3.add(p2, BorderLayout.NORTH);
JPanel p4 = new JPanel();
p4.setLayout(new GridLayout(4, 1));
p4.add(new JLabel("Manufacture:"));
p4.add(new JLabel("Model:"));
p4.add(new JLabel("Mileage:"));
p4.add(new JLabel("Charge:"));
JPanel p5 = new JPanel();
p5.setLayout(new GridLayout(4, 1));
p5.add(jtfManufacture);
p5.add(jtfModel);
p5.add(jtfMileage);
p5.add(jtfCharge);
// JPanel p6 = new JPanel();
// p6.setLayout(new BorderLayout());
// p6.add(p4, BorderLayout.SOUTH);
// p6.add(p5, BorderLayout.EAST);
// Place p1 and p4 into CustomerPanel
setLayout(new BorderLayout());
add(p1, BorderLayout.WEST);
add(p2, BorderLayout.NORTH);
add(p4, BorderLayout.SOUTH);
add(p5, BorderLayout.EAST);
So could someone please help me and correct my code so that each text lable is lined up next to its jtf java text field. -
I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???
Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.
-
I have buy 4s it's unlocked and its working ok with different carriers in Bahrain, but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this?
Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards. -
I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj SI already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software. -
hi.. i forgot my apple id and password.. i cant activate my ipod touch..
but here's the serial number, *************** please help me.. thanks
<Edited by Host>We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your iPod's serial number address from your post.
Only you can activate your iPod by typing in your id and password, or you can remove a device from your account via http://icloud.com . If you can't remember your account id then do you have any of its downloads on your computer's iTunes : Recovering a forgotten iTunes Store account name ? If not then you could try http://iforgot.apple.com . You can also reset your password via the 'iforgot' site, or you can contact Support in your country and they should be able to reset your password (as long as you can prove your id and that it's your account) : Apple ID: Contacting Apple for help with Apple ID account security
iOS 7 and activation lock : iCloud: Find My iPhone Activation Lock in iOS 7
What if I forget my Apple ID password?
If you forget your password, you can reset it at My Apple ID (appleid.apple.com) or by contacting Apple Support and verifying your identity. Once your password has been reset, it will work normally with Find My iPhone and Activation Lock.
If you forget your password and cannot reset it, you will lose access to your Apple ID and may be unable to use or reactivate your device. To help prevent this, visit My Apple ID periodically to review and update your account information. -
Can some one please help me with this?
You would probably get some response if you posted your question in the Photoshop forum ...
I'll move it there for you.
- Dov -
HT6154 can some one please help me ASAP
can some one please help me ASAP
I went to my settings then general and restored my Iphone to factory default and its been stuck on the loading screen for more than an hour and I don't know what to doConnect iPhone in newest iTunes and Hit Restore
-
is there any way to delete my apple id because i currently have 3 and i only need one. please help. thanks
No. Apple IDs can't be merged or deleted.
(87219) -
My sql query running for more than 4 hours could some one please help me
Hi ,
I have one sql executable and the query is running for more than 4 hours . Could some one please help me in tuning the sql.
The stats and all the general stuff is intact at db level :
SELECT pasl.item_id item_id
, pv.vendor_name vendor_name
, msif.segment1 item
, NVL(cic.item_cost,0) item_cost
, NVL(pasl.attribute1,0) asl_cost
FROM apps.mtl_system_items_b msif
, apps.po_approved_supplier_list pasl
, apps.cst_item_cost_type_v cic
, apps.po_vendors pv
, apps.po_asl_statuses past
, apps.mtl_item_categories mic
, apps.mtl_categories_b mc
, apps.mtl_category_sets_b mcb
, apps.mtl_category_sets_b mcbm
, apps.mtl_categories_b mcm
, apps.mtl_item_categories micm
WHERE pasl.item_id = msif.inventory_item_id
AND msif.inventory_item_id = cic.inventory_item_id
AND msif.inventory_item_status_code in ('Active','ENG HOLD')
AND cic.cost_type = 'Frozen'
AND msif.organization_id = cic.organization_id
AND EXISTS (SELECT 1
FROM apps.mtl_system_items_b msin,
apps.mtl_parameters mpn,
apps.org_organization_definitions oodn
WHERE msin.organization_id = mpn.organization_id
AND mpn.organization_id = oodn.organization_id
AND msin.inventory_item_id = msif.inventory_item_id
AND oodn.operating_unit = :p_ou
AND cic.organization_id = 87
AND NVL(pv.end_date_active,TRUNC(SYSDATE+1)) > TRUNC(SYSDATE)
AND pv.vendor_id = pasl.vendor_id
AND mcbm.structure_id = mcm.structure_id
AND nvl(mcm.start_date_active, (SYSDATE - 1)) < SYSDATE
AND nvl(mcm.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcbm.category_set_id = 1
AND micm.inventory_item_id = msif.inventory_item_id
AND micm.organization_id = msif.organization_id
AND micm.category_set_id = mcbm.category_set_id
AND micm.category_id = mcm.category_id
AND (SUBSTR(mcm.segment1,1,2) = 'FG' OR msif.item_type LIKE 'FG%')
AND mcm.segment3 NOT IN ('4','5','9','A')
AND mcb.structure_id = mc.structure_id
AND NVL(mc.start_date_active, (SYSDATE - 1)) < SYSDATE
AND nvl(mc.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcb.category_set_id = 1100000022
AND mic.inventory_item_id = msif.inventory_item_id
AND mic.organization_id = msif.organization_id
AND mic.category_set_id = mcb.category_set_id
AND mic.category_id = mc.category_id
AND SUBSTR(mc.segment2,1,2) = pv.attribute6
AND ROUND(NVL(pasl.attribute1,0),2) <> ROUND(NVL(cic.item_cost,0),2)
AND pasl.asl_status_id = past.status_id
AND UPPER(past.status) = 'APPROVED'
--and pv.attribute6 not in('IN','BG','CT')
and msif.inventory_item_id = :p_item_id42737
UNION
SELECT pasl.item_id item_id
, pv.vendor_name vendor_name
, msif.segment1 item
, NVL(cic.item_cost,0) item_cost
, NVL(pasl.attribute1,0) asl_cost
FROM apps.mtl_system_items_fvl msif
, apps.po_approved_supplier_list pasl
, apps.cst_item_cost_type_v cic
, apps.po_vendors pv
, apps.po_asl_statuses past
, apps.mtl_item_categories mic
, apps.mtl_categories_b mc
, apps.mtl_category_sets_b mcb
, apps.mtl_category_sets_b mcbm
, apps.mtl_categories_b mcm
, apps.mtl_item_categories micm
WHERE pasl.item_id = msif.inventory_item_id
AND msif.inventory_item_id = cic.inventory_item_id
AND msif.inventory_item_status_code in ('Active','ENG HOLD')
AND cic.cost_type = 'Frozen'
AND msif.organization_id = cic.organization_id
AND EXISTS (SELECT 1
FROM apps.mtl_system_items_b msin,
apps.mtl_parameters mpn,
apps.org_organization_definitions oodn
WHERE msin.organization_id = mpn.organization_id
AND mpn.organization_id = oodn.organization_id
AND msin.inventory_item_id = msif.inventory_item_id
AND oodn.operating_unit = :p_ou
AND cic.organization_id = 87
AND NVL(pv.end_date_active,TRUNC(SYSDATE+1)) > TRUNC(SYSDATE)
AND pv.vendor_id = pasl.vendor_id
AND mcbm.structure_id = mcm.structure_id
AND NVL(mcm.start_date_active,(SYSDATE - 1)) < SYSDATE
AND NVL(mcm.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcbm.category_set_id = 1
AND micm.inventory_item_id = msif.inventory_item_id
AND micm.organization_id = msif.organization_id
AND micm.category_set_id = mcbm.category_set_id
AND micm.category_id = mcm.category_id
AND (SUBSTR(mcm.segment1,1,2) = 'FG' OR msif.item_type LIKE 'FG%')
AND mcm.segment3 NOT IN ('4','5','9','A')
AND mcb.structure_id = mc.structure_id
AND NVL(mc.start_date_active,(SYSDATE - 1)) < SYSDATE
AND nvl(mc.end_date_active,(SYSDATE + 1)) > SYSDATE
AND mcb.category_set_id = 1100000022
AND mic.inventory_item_id = msif.inventory_item_id
AND mic.organization_id = msif.organization_id
AND mic.category_set_id = mcb.category_set_id
AND mic.category_id = mc.category_id
AND SUBSTR(mc.segment2,1,2) = pv.attribute6
AND pasl.asl_status_id = past.status_id
AND UPPER(past.status) = 'APPROVED'
--and pv.attribute6 not in('IN','BG','CT')
AND NVL(pasl.attribute1,0) = 0
AND NVL(cic.item_cost,0) != 0
and msif.inventory_item_id = :p_item_id42737
The execution plan displayed in taod is as below :
Plan
SELECT STATEMENT ALL_ROWSCost: 464 Bytes: 905 Cardinality: 2
140 SORT UNIQUE Cost: 464 Bytes: 905 Cardinality: 2
139 UNION-ALL
69 NESTED LOOPS Cost: 185 Bytes: 446 Cardinality: 1
67 NESTED LOOPS OUTER Cost: 180 Bytes: 444 Cardinality: 1
65 NESTED LOOPS Cost: 178 Bytes: 408 Cardinality: 1
63 NESTED LOOPS Cost: 177 Bytes: 404 Cardinality: 1
60 NESTED LOOPS Cost: 176 Bytes: 378 Cardinality: 1
57 NESTED LOOPS Cost: 174 Bytes: 353 Cardinality: 1
55 NESTED LOOPS Cost: 174 Bytes: 349 Cardinality: 1
53 NESTED LOOPS Cost: 174 Bytes: 342 Cardinality: 1
50 NESTED LOOPS Cost: 173 Bytes: 336 Cardinality: 1
48 NESTED LOOPS Cost: 173 Bytes: 332 Cardinality: 1
46 FILTER
45 NESTED LOOPS OUTER Cost: 171 Bytes: 322 Cardinality: 1
43 NESTED LOOPS Cost: 169 Bytes: 305 Cardinality: 1
41 NESTED LOOPS Cost: 168 Bytes: 292 Cardinality: 1
38 NESTED LOOPS Cost: 166 Bytes: 277 Cardinality: 1
36 NESTED LOOPS Cost: 166 Bytes: 273 Cardinality: 1
33 NESTED LOOPS Cost: 165 Bytes: 256 Cardinality: 1
30 NESTED LOOPS Cost: 162 Bytes: 237 Cardinality: 1
27 NESTED LOOPS Cost: 161 Bytes: 203 Cardinality: 1
24 NESTED LOOPS Cost: 159 Bytes: 185 Cardinality: 1
22 NESTED LOOPS Cost: 158 Bytes: 163 Cardinality: 1
19 NESTED LOOPS Cost: 156 Bytes: 117 Cardinality: 1
16 NESTED LOOPS Cost: 90 Bytes: 95 Cardinality: 1
13 NESTED LOOPS Cost: 49 Bytes: 72 Cardinality: 1
10 NESTED LOOPS Cost: 8 Bytes: 41 Cardinality: 1
8 NESTED LOOPS Cost: 3 Bytes: 30 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 22 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_DEFAULT_CATEGORY_SETS Cost: 1 Bytes: 8 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_DEFAULT_CATEGORY_SETS_U1 Cost: 0 Cardinality: 1
9 TABLE ACCESS FULL TABLE PO.PO_ASL_STATUSES Cost: 5 Bytes: 11 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 93 Cardinality: 3
11 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
15 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 92 Cardinality: 4
14 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
18 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_CATEGORIES Cost: 65 Bytes: 22 Cardinality: 1
17 INDEX RANGE SCAN INDEX INV.MTL_ITEM_CATEGORIES_N3 Cost: 2 Cardinality: 293
21 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 46 Cardinality: 1
20 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
23 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
26 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_APPROVED_SUPPLIER_LIST Cost: 2 Bytes: 18 Cardinality: 1
25 INDEX RANGE SCAN INDEX PO.PO_APPROVED_SUPPLIER_LIST_N1 Cost: 1 Cardinality: 1
29 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_VENDORS Cost: 1 Bytes: 34 Cardinality: 1
28 INDEX UNIQUE SCAN INDEX (UNIQUE) PO.PO_VENDORS_U1 Cost: 0 Cardinality: 1
32 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_ITEM_COSTS Cost: 3 Bytes: 19 Cardinality: 1
31 INDEX RANGE SCAN INDEX (UNIQUE) BOM.CST_ITEM_COSTS_U1 Cost: 2 Cardinality: 1
35 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_COST_TYPES Cost: 1 Bytes: 17 Cardinality: 1
34 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Cardinality: 1
37 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Bytes: 4 Cardinality: 1
40 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 15 Cardinality: 1
39 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
42 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
44 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 2 Bytes: 17 Cardinality: 1
47 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 2 Bytes: 30 Cardinality: 3
49 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
52 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 6 Cardinality: 1
51 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
54 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 7 Cardinality: 1
56 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
59 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 2 Bytes: 25 Cardinality: 1
58 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
62 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 1 Bytes: 26 Cardinality: 1
61 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
64 INDEX FULL SCAN INDEX (UNIQUE) GL.GL_SETS_OF_BOOKS_U2 Cost: 1 Bytes: 4 Cardinality: 1
66 INDEX RANGE SCAN INDEX (UNIQUE) APPLSYS.FND_LOOKUP_VALUES_U1 Cost: 2 Bytes: 36 Cardinality: 1
68 TABLE ACCESS FULL TABLE APPLSYS.FND_PRODUCT_GROUPS Cost: 5 Bytes: 2 Cardinality: 1
138 NESTED LOOPS Cost: 278 Bytes: 459 Cardinality: 1
136 NESTED LOOPS Cost: 277 Bytes: 449 Cardinality: 1
134 NESTED LOOPS Cost: 277 Bytes: 445 Cardinality: 1
132 NESTED LOOPS Cost: 277 Bytes: 441 Cardinality: 1
129 NESTED LOOPS Cost: 275 Bytes: 415 Cardinality: 1
127 NESTED LOOPS Cost: 275 Bytes: 408 Cardinality: 1
124 NESTED LOOPS Cost: 274 Bytes: 402 Cardinality: 1
122 NESTED LOOPS Cost: 273 Bytes: 398 Cardinality: 1
120 MERGE JOIN CARTESIAN Cost: 268 Bytes: 373 Cardinality: 1
117 FILTER
116 NESTED LOOPS OUTER Cost: 263 Bytes: 371 Cardinality: 1
114 NESTED LOOPS Cost: 261 Bytes: 354 Cardinality: 1
112 NESTED LOOPS OUTER Cost: 260 Bytes: 341 Cardinality: 1
110 NESTED LOOPS Cost: 258 Bytes: 305 Cardinality: 1
107 NESTED LOOPS Cost: 256 Bytes: 290 Cardinality: 1
105 NESTED LOOPS Cost: 256 Bytes: 286 Cardinality: 1
102 NESTED LOOPS Cost: 255 Bytes: 269 Cardinality: 1
99 NESTED LOOPS Cost: 252 Bytes: 250 Cardinality: 1
97 NESTED LOOPS Cost: 251 Bytes: 237 Cardinality: 1
95 NESTED LOOPS Cost: 250 Bytes: 215 Cardinality: 1
93 NESTED LOOPS Cost: 249 Bytes: 193 Cardinality: 1
90 NESTED LOOPS Cost: 245 Bytes: 294 Cardinality: 2
87 HASH JOIN Cost: 230 Bytes: 387 Cardinality: 3
85 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 92 Cardinality: 4
84 NESTED LOOPS Cost: 90 Bytes: 95 Cardinality: 1
82 NESTED LOOPS Cost: 49 Bytes: 72 Cardinality: 1
79 NESTED LOOPS Cost: 8 Bytes: 41 Cardinality: 1
77 NESTED LOOPS Cost: 3 Bytes: 30 Cardinality: 1
74 NESTED LOOPS Cost: 2 Bytes: 22 Cardinality: 1
71 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
70 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
73 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
72 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
76 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_DEFAULT_CATEGORY_SETS Cost: 1 Bytes: 8 Cardinality: 1
75 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_DEFAULT_CATEGORY_SETS_U1 Cost: 0 Cardinality: 1
78 TABLE ACCESS FULL TABLE PO.PO_ASL_STATUSES Cost: 5 Bytes: 11 Cardinality: 1
81 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 93 Cardinality: 3
80 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
83 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
86 TABLE ACCESS FULL TABLE PO.PO_VENDORS Cost: 139 Bytes: 15,980 Cardinality: 470
89 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_APPROVED_SUPPLIER_LIST Cost: 13 Bytes: 18 Cardinality: 1
88 INDEX RANGE SCAN INDEX PO.PO_APPROVED_SUPPLIER_LIST_N3 Cost: 1 Cardinality: 64
92 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 46 Cardinality: 1
91 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
94 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
96 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
98 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
101 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_ITEM_COSTS Cost: 3 Bytes: 19 Cardinality: 1
100 INDEX RANGE SCAN INDEX (UNIQUE) BOM.CST_ITEM_COSTS_U1 Cost: 2 Cardinality: 1
104 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_COST_TYPES Cost: 1 Bytes: 17 Cardinality: 1
103 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Cardinality: 1
106 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Bytes: 4 Cardinality: 1
109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 15 Cardinality: 1
108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
111 INDEX RANGE SCAN INDEX (UNIQUE) APPLSYS.FND_LOOKUP_VALUES_U1 Cost: 2 Bytes: 36 Cardinality: 1
113 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
115 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 2 Bytes: 17 Cardinality: 1
119 BUFFER SORT Cost: 266 Bytes: 2 Cardinality: 1
118 TABLE ACCESS FULL TABLE APPLSYS.FND_PRODUCT_GROUPS Cost: 5 Bytes: 2 Cardinality: 1
121 TABLE ACCESS FULL TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 5 Bytes: 25 Cardinality: 1
123 INDEX FULL SCAN INDEX (UNIQUE) GL.GL_SETS_OF_BOOKS_U2 Cost: 1 Bytes: 4 Cardinality: 1
126 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 6 Cardinality: 1
125 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
128 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 7 Cardinality: 1
131 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 2 Bytes: 26 Cardinality: 1
130 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
133 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
135 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
137 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Bytes: 10 Cardinality: 1
Regards,
Siva.Welcome to the forums !
Pl post details of OS, database and EBS versions.
Pl see these threads on how to post a tuning request -
HOW TO: Post a SQL statement tuning request - template posting
When your query takes too long ...
HTH
Srini
Maybe you are looking for
-
Web service and servlets in the same project...web.xml?
Hello, I have a problem with my web service. I have a server, which displays a web service. I programmed this service with JAXRPC. I have a client, in another directory. I succeded in compiling, deploying and running the web service. The problem is t
-
How to use an external hard drive and copy files to the disk for mac and windows??
please tell me how to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk. thank you.
-
I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ". I tried adding username and password in the SMTP server settings,But those optiopns are greyed out. So, i am not able to en
-
I have 113 photo slideshow and in iTunes I created a playlist with 3 songs for the slideshow. During last song it stopped and started again. Why is this? I have the slideshow set to fit to slideshow.
-
Q & A Database for AS is and to BE
Hi Folks, Can you please provide me a Q&A (AS IS - TO BE)database for a CIN blueprint. I need it from SD,MM,FI-CO perspective. You can email it to me at [email protected] Thanks and points will be rewarded. Cheers!! Anupam