Hi every body, I need to visit an apple store in Tallinn, Estoni but it seems that there is no Apple store here. So what can I do? finding an agent or?
Hi every body, I need to visit an apple store in Tallinn, Estoni but it seems that there is no Apple store here. So what can I do? finding an agent or?
http://www.apple.com/ee/support/
Similar Messages
-
hey guys, I recently got an Ipad 4 but it seems that there's no facetime on it. I really need this feature to be working. any suggestions?
Iif you bought it from the UAE or other middle eastern country, facetime is blocked at the hardware level and can never be installed.
-
I need to back up my iphone 5s on my old PC running Windows Vista SP2. After installing the proper iTunes that would run on Vista, I get an error as follows;
"Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Windows error 2)"
I will appreciate any help. ThanksWith the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...
jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B -
Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?
Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L -
every time I repair my iPod with iTunes, it hangs at the end of the process (while checkin the recovery of iPod). What can I do?
I chose to restore it to factory defaults, but that never succeeded.
It hangs at the end of the process.
printscreen:
http://users.telenet.be/kevvanbelle/iPod/ipod.JPG
Language is Dutch :-)
Littery it says:
Check of Recovery of iPod.
Already for 40 minutes.
I closed down iTunes.
Now, when I turn on my iPod, there is the icon of iTunes with an usb cable towards it.
When I attach it to my computer and turn on iTunes, the message is there that a iPod was stuck in recovery mode and I should retry it.
And then I get the same story. Unpacking, installing, checking... blocked! -
My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?
It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384) -
My iphone 3gs is acting weird, every time i get a call or if i try and call some one my iphone gets random black lines down it) so what can I do to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?
Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.
-
I have a full Creative Cloud Subscription, but I only use Photoshop and Bridge. I want to change to a less expensive subscription but it is not clear what steps I need to do to make this happen. Do you have a simple step by step guide? Seems that there is lots of help to upgrade but not down grade.
FIRST check with Adobe to find out if you may cancel what you have without a fee
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Then cancel what you have
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
And finally buy a new subscription
Cloud Plans https://creative.adobe.com/plans
-Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
-Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan) -
Have a macbook pro 2009 currently at version 10.5.8 need to install new version for i phone 5 but will not let me until I install MAC OS X Version 10.6 cant find this anywhere! Any ideas thanks
Click here.
(75139) -
1 month ago I changed batteries to my keyboard.yesterday appeard msg for low battery again. I try to take of the old ones but I realized that there was battery liquid dry in there. Now my keyboard is dead... Do anyone knows what to do... I need a new ?
If your batteries leaked and possibly eroded teh contacts the best you can do it to attempt to remove all the fluid and clean the contacts. If the keyboard still does not work after a thorough cleaning yes it will need to be replaced. A new wireless keyboard is about $59 from OWC or you may want to look online for a used one, sometimes OWC (www.macsales.com) has them used. Other sources are Apple of course, Amazon, and any Apple reseller.
-
My IPad says that it isn't backed up and needs to be connected to wifi plugged in and lock and I try to click ok and it does nothing what can I do?
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
Yesterday, since I downloaded the latest version 3.6.6, every time firefox opens and when I click on something, I get multiple error windows that say "ERROR: Security Manager Vetoed Action". I can't hardly use if anymore because of all the window pop-ups. What can I do? Can I go back to an older version?
== This happened ==
Every time Firefox opened
== I downloaded version 3.6.6 yesterdayhello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly
Maybe you are looking for
-
Problem with java and flex web service
Hi, I have a basic web service written in java using jax ws 2.1 ri. I need to call it from Flex using the WebService class Annotations for the java web method : @WebMethod public void Login( @WebParam(name="server") String serverURL, @WebParam(name=A
-
I have recently downloaded the latest version of iTunes 7 and when i try to open it, it comes up with an error saying itunes has encountered an error and needs to close. Nither itunes or the standalone version of quick time seem to work. Can you help
-
Decode Base64 and save as binary file
Hi there, I am using Adobe Air 1.5 with JavaScript and want to save a file to my hard drive. I get the data from a WebService via SOAP as a Base64 encoded string. A test-string is attached. When I try to decode it with the WebKit function "atob()" an
-
when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall? Is it necessary on a Mac to do so? I come from the Windows world and am still in the learning curve on the Mac.
-
Please any one help me in creating a zip file using java and extracting it using winzip utility. Thanks in advance.