Hi friends, I have a doubt in inserting a field to database table and inserting the same values in two different tables

I have a mpp screen for a cd library management system (we are practicing on it).
We have a main screen where a user should enter the enteries and while clicking a add button it should be inserted in a table, Here the problem rises the table name are ztransaction and zstatus.The fields in mpp are cdid,customerid,transaction id,date of issue and duedate.Now after entering all the values on clicking add button it should be inserted to database table ztransaction and the field cdid alone should be inserted both in ztransaction and zstatus.
Thank you

Hi Raghuram R G,
Check for Primary key and foreign key in the Database table??? Because of this it was not inserting...check and confirm??
Regds,
Vijay SR

Similar Messages

Insert same record on two different tables (no master detail)

Hi all,
I'd like to know how to insert 1 record into two different
tables.
the first table is corni_dati the second is cornidati_prev
anytime someone inserts a new record both tables should be
filled.
if ((isset($HTTP_POST_VARS["MM_insert"])) &&
($HTTP_POST_VARS["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO corni_dati (corni_id,
disciplina,
codice_modulo, insegnanti, classi, obiettivi, prerequisiti,
ud1, ud2,
ud3, ud4, ud5, ud6, metodologia, collegamenti, verifiche,
verifiche_note, durata, periodo_inizio, periodo_fine, note,
indirizzo,
modnum, modulo_titolo, `data`, compilato, descrizione) VALUES
(%s, %s,
%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s,
%s, %s, %s,
%s, %s, %s, %s, %s, %s, %s)",
GetSQLValueString($HTTP_POST_VARS['corni_id'],
"int"),
GetSQLValueString($HTTP_POST_VARS['disciplina'],
"text"),
GetSQLValueString($HTTP_POST_VARS['codice_modulo'], "text"),
GetSQLValueString($HTTP_POST_VARS['insegnanti'],
"text"),
GetSQLValueString($HTTP_POST_VARS['classi'],
"text"),
GetSQLValueString($HTTP_POST_VARS['obiettivi'],
"text"),
GetSQLValueString($HTTP_POST_VARS['prerequisiti'], "text"),
GetSQLValueString($HTTP_POST_VARS['ud1'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud2'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud3'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud4'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud5'],
"text"),
GetSQLValueString($HTTP_POST_VARS['ud6'],
"text"),
GetSQLValueString($HTTP_POST_VARS['metodologia'], "text"),
GetSQLValueString($HTTP_POST_VARS['collegamenti'], "text"),
GetSQLValueString($HTTP_POST_VARS['verifiche'],
"text"),
GetSQLValueString($HTTP_POST_VARS['verifiche_note'], "text"),
GetSQLValueString($HTTP_POST_VARS['durata'],
"int"),
GetSQLValueString($HTTP_POST_VARS['periodo_inizio'], "text"),
GetSQLValueString($HTTP_POST_VARS['periodo_fine'], "text"),
GetSQLValueString($HTTP_POST_VARS['note'],
"text"),
GetSQLValueString($HTTP_POST_VARS['indirizzo'],
"text"),
GetSQLValueString($HTTP_POST_VARS['modnum'],
"text"),
GetSQLValueString($HTTP_POST_VARS['modulo_titolo'], "text"),
GetSQLValueString($HTTP_POST_VARS['data'],
"date"),
GetSQLValueString($HTTP_POST_VARS['compilato'],
"text"),
GetSQLValueString($HTTP_POST_VARS['descrizione'], "text"));
mysql_select_db($database_itiscorni, $itiscorni);
$Result1 = mysql_query($insertSQL, $itiscorni) or
die(mysql_error());
$insertGoTo = "creacodice_doc.php";
if (isset($HTTP_SERVER_VARS['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $HTTP_SERVER_VARS['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));

If you are doing this then you really should have a look at
your database
design. Read up on the first 3 normal forms.
Pat.
"darrel" <[email protected]> wrote in message
news:ee77jg$302$[email protected]..
>
>
> --
>> Hi all,
>> I'd like to know how to insert 1 record into two
different tables.
>
> In your SQL query, just use two inserts:
>
> INSERT into TABLE1...; INSERT into TABLE2...
>
> Darrel
>

TS2972 I have multiple libraries on the "same computer" with two different desktops, can't I share between two libraries on the same computer?

I'm trying to use home sharing to share content between libraries so some of the combined content in a given library, can be synced to an ipad. Instad of having mulitple computers, i have multiple libraries on the same computer using two desktops. How do I share within the same computer?

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

Inserting sequence value from JDBC and getting the same value back

Hi: Gurus I have a table whose primary key is a sequence. I wonder how to make sure I get the same sequence value back for current transaction so I update the other table whose foreign key is the sequence value from first table.
E.g lets say I do this
String query_insert = INSERT INTO table1 (column1, ....) VALUES (HIGHLIGHT_ID_SEQ.nextval, ...);
pstmt = con.prepareStatement(query_insert);
pstmt.executeUpdate();
How I make sure no other transaction update the sequence value so I can read the last inserted sequence value and update the second table with this value
String query_select = "SELECT HIGHLIGHT_ID_SEQ.currval FROM DUAL";
pstmt = con.prepareStatement(query_select);
Regards,
Rashid.

<rant>No version again. I wonder why people requiring help want to stay anonymous and never want to type their version, only 4 digits. In this case, jdbc, not only the version of the driver is important, but also it's type. Waving a magic wand again? </rant>
Look up the returning into clause of the insert statement in the sql reference manual for your version.
Sybrand Bakker
Senior Oracle DBA

Can i have the same application in two different oc4j containers?

Hi,
I have developed one J2EE application and still the updation is going on. So i wanted to to deploy the application in two different oc4j containers. so that one will be having the working version of my application and the users can use that application. I want to use the second container as my test application, in that i can modify and test. The deployment of my application in two different containers went fine. But when i try to access the web application with the context, it is serving from the latest deployment for my request.
My question is :
1) Can i use both applications with different Oracle HTTP server port numbers??
2) All the HTTP requests are passed to the oc4j containers by AJP13 protocol through AJP port to the OC4J containers. where is the mapping between the OHS and AJP protocol defined ??? ie., the requests from this http port have to be transferred by AJP protocol through AJP port to this OC4J container ???
3) Or i have to have two different installations of Oracle9iAS ???
Please help me to solve my issues...
Robert D

Different ohs port numbers would not help as there is only 1
$iashome/Apache/Apache/conf/mod_oc4j.conf
You can pick a different context_root name for your test app.
Ken

Can I have the same library on two different computers

I have my iTunes library on a external drive linked to my work computer. Can I link it to my home computer too?

If it is only the media files that are on the external drive, with the library files in the default location of User's Music\iTunes then see Make a split library portable.
tt2

How to have two seperate Itunes on the same computer for two Ipods?

Is there a way to have two separate Itunes downloaded on the same computer for two different Ipods? My sister got a new Ipod and she wants to hook it up to the computer but when ever she does it just pulls up my Itunes and has all of my songs on there. How can we each have our own Itunes?

There's many ways to accomplish this. You could create two accounts in Windows. That way everything is completely separate. Or, you could manually manage your music in iTunes -- this way it won't automatically sync your music onto her iPod. More info here:
http://docs.info.apple.com/article.html?artnum=61148
http://docs.info.apple.com/article.html?artnum=93779

The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

They will have to be answered the first time when purchasing from a new computer or device.

HT201272 I have always had and used the same Apple ID, so where are the rest of the songs I bought from itunes? I've bought at least 400 songs and I only am being able to download 178. Where are the rest of my purchases?!

I have always had and used the same Apple ID. I have changed credit card information on my Apple ID account several times though. Does that make a difference when downloading past purchases? I'm very angry at Apple and Itunes because I have been using itunes since 05/2005 and I do not have even close to the amount of songs and albums that I have purchased from itunes. If the credit card info does make a difference even though the account is the same one then itunes needs to make sure to notify users of this because I am not the only one who is wondering this same thing. I have numerous friends who i've talked to about this and they say the same thing, that they too have songs purchased in the past that have disappeared when trying to download past purchased items. It should not make a difference. $12 is $12. Especially since I have ALWAYS used the same account. If itunes does not change their ways, I will not be purchasing songs or anything else for that matter from them ever again. I will go back to buying CDs where I KNOW that it will always be with me and I don't have to deal with this. I will also make sure to find a better more reliable source to download music from and will make sure everyone I know and come in contact with knows what it is and how much better it is than itunes. There should be no experation date on the music I PURCHASE, nor should there be any other little loop holes that allow itunes to rob us of rightfully purchased products. What's the deal itunes??

mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

How to Query from table and insert into another table.

Hi
I am using the following query in VO and all the columns are attached to EO ( table name emp_temp)
select a.npw_number, a.person_id,b.assignment_id,a.title,a.last_name,a.first_name,a.date_of_birth,a.sex,
b.organization_name,b.organization_id,b.job_id,b.job_name,b.position_id,b.position_name,b.supervisor_id,
b.supervisor_name,b.location_id,b.effective_start_date,b.effective_end_date
from per_all_people_f a,per_assignments_v b
where a.person_id=b.person_id
and a.npw_number=:1
I can query the data in screen. I need into insert the data into the emp_temp.
I don't know how to do this . Please help me.
Thanks
Subra

You can create a VO based on EO on emp_temp table.....
And u have attached a Different VO on the page... Right...
Now what u can do is....once u click on apply....
u can set the each attributes of EO based VO explicitly via code, from the values of second VO.... and then commit.....
Perhaps this might help...

Compare 2 tables and insert rows missing in each table.

I have a tough situation. I have two exact tables- one online and one offline database. I know that there are missing rows of data from each table, so I need to make a comparison of one table and insert rows that do not exist. I was thinking to try this, but it took over 3 hours to run and did not return anything:
insert into t
select * from t a
where not exists (select * from [email protected] b
where a.col1 != b.col1
and a.col2 != b.col2
and a.col3 != b.col3);
and it goes on for another 7columns.
The trouble I have is to include a date clause so that the query can be broken down into running only a few months of data comparisions at a time- the records go back 4 years to compare. Also is there a way to write this so that it will query both tables at the same time in order to speed things up- or is one table at a time the best advice? Each table has over 100 million records to compare, that's why I was hoping to use a date criteria since one column is date.
Let me know what you advise to make this work, I hope I was on the right track.

Not sure if the MINUS operator will perform better with your data set but;
SQL> create table t1 (some_id number, some_date date)
Table created.
SQL> create table t2 (some_id number, some_date date)
Table created.
SQL> insert into t1 values (1, trunc(sysdate))
1 row created.
SQL> insert into t1 values (2, trunc(sysdate-5))
1 row created.
SQL> insert into t1 values (4, trunc(sysdate-90))
1 row created.
SQL> insert into t2 values (1, trunc(sysdate))
1 row created.
SQL> insert into t2 values (3, trunc(sysdate-10))
1 row created.
SQL> insert into t2 values (5, trunc(sysdate-100))
1 row created.
SQL> select * from t1
   SOME_ID SOME_DAT
         1 07-07-30
         2 07-07-25
         4 07-05-01
3 rows selected.
SQL> select * from t2
   SOME_ID SOME_DAT
         1 07-07-30
         3 07-07-20
         5 07-04-21
3 rows selected.
SQL> insert into t1 (
   select some_id, some_date from t2 where some_date between sysdate-50 and sysdate
   minus
   select some_id, some_date from t1 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> insert into t2 (
   select some_id, some_date from t1 where some_date between sysdate-50 and sysdate
   minus
   select some_id, some_date from t2 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> select * from t1
   SOME_ID SOME_DAT
         1 07-07-30
         2 07-07-25
         4 07-05-01
         3 07-07-20
4 rows selected.
SQL> select * from t2
   SOME_ID SOME_DAT
         1 07-07-30
         3 07-07-20
         5 07-04-21
         2 07-07-25
4 rows selected.

[solved] inserting the same rows again into that table

i have a table with some rows now i want to insert the same rows again into that table
please tell me how to do it?
not using export please only sql query please
Message was edited by:
littlemaster

i m expecting that u commented on me (may be i m wrong). Only once, which we had already dealt with further up. My comment was continuing along another 'off topic' re: code graffitti. Sorry I you felt I was continuing to get at you.
(If you look at the 'In Response to' part of ant post you can see which post any p[ost is intended to reply to)

Select from 2 tables and insert same data into 2 other tables(BPEL Process)

Hi All,
Please suggest me how to select from 2 tables and insert the same data into 2 tables. I am successful in selecting data from 2 tables, but i am not able to insert the same data into 2 other tables. There is foreign key constraint between 2 tables.
Thanks in Advance,
MAH

I have created DB Adapter for selecting from 2 tables and also DB adapter for insert and i have created parent child relationship between 2 tables.
I am getting this error
<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>env:Server</faultcode>
<faultstring>com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 6f3fe20c1b031057:-6cc7dfb5:11b8bf5fbe1:-7fa4. Please check the process instance for detail.</faultstring>
</Fault>

Generate xml from a table and insert the xml into another table

I want to generate an xml file from a table and insert it into another table all in one tsql
insert into table B(xmlfile)
select * from tableA
FOR
XML
PATH('ac'),TYPE,ELEMENTS
XSINIL,ROOT('Accum')
Is not working any help

I have solved my issue all I did was to change my column datatype to xml

Hi friends, I have a doubt in inserting a field to database table and inserting the same values in two different tables

Similar Messages

Maybe you are looking for